Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ion migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Voltage bias stress effects in metal halide perovskites are strongly dependent on morphology and ion migration pathways

The solar-to-power power conversion efficiencies (PCEs) of metal halide perovskites (MHP) have improved over the last decade using a wide variety of methods, including composition manipulation, dopant introduction, and interfacial buffers. These methods, however, have taken little regard for the electronic and interfacial effects such alterations may cause within devices under voltage bias stress – a condition required for most device operation. We investigate how halide and cation substitution in MHP structures [specifically, CH 3 NH 3 PbI 2.87 Cl 0.13 and Cs 0.1 (MA 0.17 FA 0.83 ) 0.9 Pb(I 0.83 Br 0.17 ) 3 ] effects the current behavior of devices while under a range of voltage bias stress in both light and dark conditions. Additionally, conducting in depth investigations into the electronic and morphological differences between these two MHP devices, we confirmed their unique voltage bias stress effects are due to intrinsic behavior within the perovskite structure. Importantly, we also determined how crystallite orientation can influence ion migration and therefore alter charge transport and current stability in MHP photovoltaic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Entropy Stabilization Effects and Ion Migration in 3D “Hollow” Halide Perovskites

A recently discovered new family of 3D halide perovskites with the general formula (A) 1–x (en) x (Pb) 1–0.7x (X) 3–0.4x (A = MA, FA; X = Br, I; MA = methylammonium, FA = formamidinium, en = ethylenediammonium) is referred to as “hollow” perovskites owing to extensive Pb and X vacancies created on incorporation of en cations in the 3D network. The “hollow” motif allows fine tuning of optical, electronic, and transport properties and bestowing good environmental stability proportional to en loading. To shed light on the origin of the apparent stability of these materials, we performed detailed thermochemical studies, using room temperature solution calorimetry combined with density functional theory simulations on three different families of “hollow” perovskites namely en/FAPbI 3 , en/MAPbI 3 , and en/FAPbBr 3 . We found that the bromide perovskites are more energetically stable compared to iodide perovskites in the FA-based hollow compounds, as shown by the measured enthalpies of formation and the calculated formation energies. The least stable FAPbI 3 gains stability on incorporation of the en cation, whereas FAPbBr 3 becomes less stable with en loading. This behavior is attributed to the difference in the 3D cage size in the bromide and iodide perovskites. Configurational entropy, which arises from randomly distributed cation and anion vacancies, plays a significant role in stabilizing these “hollow” perovskite structures despite small differences in their formation enthalpies. With the increased vacancy defect population, we have also examined halide ion migration in the FA-based “hollow” perovskites and found that the migration energy barriers become smaller with the increasing en content.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Blocking Ion Migration Stabilizes the High Thermoelectric Performance in Cu 2 Se Composites

The applications of mixed ionic–electronic conductors are limited due to phase instability under a high direct current and large temperature difference. Here, it is shown that Cu 2 Se is stabilized through regulating the behaviors of Cu + ions and electrons in a Schottky heterojunction between the Cu 2 Se host matrix and in-situ-formed BiCuSeO nanoparticles. The accumulation of Cu + ions via an ionic capacitive effect at the Schottky junction under the direct current modifies the space-charge distribution in the electric double layer, which blocks the long-range migration of Cu + and produces a drastic reduction of Cu + ion migration by nearly two orders of magnitude. Moreover, this heterojunction impedes electrons transferring from BiCuSeO to Cu 2 Se, obstructing the reduction reaction of Cu + into Cu metal at the interface and hence stabilizes the β-Cu 2 Se phase. Furthermore, incorporation of BiCuSeO in Cu 2 Se optimizes the carrier concentration and intensifies phonon scattering, contributing to the peak figure of merit ZT value of ≈2.7 at 973 K and high average ZT value of ≈1.5 between 400 and 973 K for the Cu 2 Se/ BiCuSeO composites. Here, this discovery provides a new avenue for stabilizing mixed ionic–electronic conduction thermoelectrics, and gives fresh insights into controlling ion migration in these ionic-transport-dominated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Applying in Situ Bias During TOF-SIMS Analysis to Investigate Ion Migration in Perovskite Devices

An in situ electrical bias was placed on a perovskite device through the device thickness while under investigation with time-of-flight secondary ion mass spectrometry. The applied bias resulted in an observed reversible migration of halide and lithium ions on the timescale of minutes. The results show a framework that can be used for further study of ion migration in perovskite materials and devices.

14 SOLAR ENERGY↗
DOE OSTI2025

In Situ Observation of Ion Migration in a Ferroelectric Ionic Conductor Rb-KTP during Thermal Annealing

Ion exchange in Rb-doped KTiOPO 4 has facilitated significant advancements in ferroelectric domain engineering, yet understanding the underlying mechanisms remains in its infancy. We perform time-of-flight secondary ion mass spectrometry analysis on multiple periodically ion-exchanged and periodically poled Rb-doped KTiOPO 4 samples under different temperatures and annealing durations. The results are compared between annealing in air, which involved ex situ annealing before periodic poling, and vacuum annealing conducted in situ after periodic poling. The Rb + diffusion profile after periodic ion exchange forms a tooth-shaped pattern. We show that in situ annealing causes a surface pinning effect on the nonpolar face, limiting Rb + migration along the polar axis at the surface. Once the pinned layer is removed through milling, the underlying Rb + diffusion is distinctively different from the surface. Additionally, the rate of Rb + diffusion during in situ annealing is linear, while the periodic domain structures remain stable after annealing. These results contribute to understanding the ionic diffusion process in a ferroelectric ionic conductor and using ion exchange to tailor the linear and nonlinear properties of KTiOPO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Improving Thermal Stability of Perovskite Solar Cells by Suppressing Ion Migration Using Copolymer Grain Encapsulation

Thermal stability of organic–inorganic hybrid perovskites (OIHPs) remains as one of the critical challenges against the stable operation of perovskite solar cells (PSCs) in direct sunlight with elevated temperatures. Here, we show that the addition of a polystyrene-co-polyacrylonitrile (SAN) copolymer can significantly enhance thermal stability of OIHPs and improve the stability of the corresponding PSCs by suppressing the migration of organic cations in OHIP. The methylammonium lead iodide (MAPI) with SAN incorporated within the perovskite layer featured a superior thermal stability compared to pure MAPI without SAN, only displaying an average of 5–15% decrease in PCE even after continuous thermal aging for 24 h at 100 °C. The secondary ion mass spectrometry revealed that the thermal degradation of the pure MAPI was largely associated with MA+ out-migration. Conducting atomic force microscopy analysis further indicated that the incorporated SAN led to a suppression of ionic currents present at the grain boundaries of the perovskite film, which was understood by high immiscibility between SAN and MA+ components as confirmed by the experimentally estimated Flory–Huggins parameter between them. This study newly identifies a potential of using polymer grain encapsulation for enhancing thermal stability of OIHPs and their solar cell performance by suppressing the out-diffusion of cationic organic components.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Carboxyl-functionalized perovskite enables ALD growth of a compact and uniform ion migration barrier

Mixed-halide wide-band-gap perovskites are critical components of highly efficient tandem cells, but their operating stability is limited by halide migration. Metal oxides deposited via atomic layer deposition (ALD) have been shown to block halide migration; however, previously pursued methods result in inhomogeneous nucleation and growth. We hypothesized that functionalizing the perovskite surface with ALD-active carboxyl groups could promote nucleation and enable higher-temperature metal oxide growth. We find that 5-ammonium valeric acid iodide (5-AVAI) facilitates the formation of a compact and uniform aluminum oxide (Al 2 O 3 ) layer and allows growth at 100°C compared with the previous limit of 75°C. We demonstrate that halide migration into the C 60 electron transport layer is reduced by a factor of 10 compared with the reference case. Finally, Al 2 O 3 -capped perovskite solar cells with a band gap of 1.78 eV retain 90% of their initial power conversion efficiency after 1,000 h of continuous operation under 1-sun illumination at 55°C.

Al2O3↗
DOE OSTI2023

Energy- and carbon-efficient CO 2 /CO electrolysis to multicarbon products via asymmetric ion migration–adsorption

Carbon dioxide/monoxide (CO 2 /CO) electrolysis provides a means to convert emissions into multicarbon products. However, impractical energy and carbon efficiencies limit current systems. Here we show that these inefficiencies originate from uncontrolled gas/ion distributions in the local reaction environment. Understanding of the flows of cations and anions motivated us to seek a route to block cation migration to the catalyst surface-a strategy we instantiate using a covalent organic framework (COF) in bulk heterojunction with a catalyst. The pi-conjugated hydrophobic COFs constrain cation (potassium) diffusion via cation-pi interactions, while promoting anion (hydroxide) and gaseous feedstock adsorption on the catalyst surface. So as a result, a COF-mediated catalyst enables electrosynthesis of multicarbon products from CO for 200 h at a single-pass carbon efficiency of 95%, an energy efficiency of 40% and a current density of 240 mA cm -2 .

42 ENGINEERING↗
DOE OSTI2021

Role of Decomposition Product Ions in Hysteretic Behavior of Metal Halide Perovskite

Ion migration is one of the most debated mechanisms and credited with multiple observed phenomena and performance in metal halide perovskites (MHPs) semiconductor devices. However, to date, the migration of ions and their effects on MHPs are not still fully understood, largely due to a lack of direct observations of temporal ion migration. In this work, using direct observation of ion migration in-operando, we observe the hysteretic migration behavior of intrinsic ions (i.e., CH 3 NH 3 + and I – ) as well as reveal the migration behavior of CH 3 NH 3 + decomposition ions. We find that CH 3 NH 3 + decomposition products can be affected by light and accumulate at the interfaces under bias. These MHP decomposition products are tightly related to the device performance and stability. Complementary results of time-resolved Kelvin probe force microscopy (tr-KPFM) demonstrate a correlation between dynamics of these interfacial ions and charge carriers. Overall, we find that there are a number of mobile ions including CH 3 NH 3 + decomposition products in MHPs that need to be taken into account when measuring MHP device responses (e.g., charge dynamics) and should be considered in future optimization studies of MHP semiconductor devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Dynamical Role of Optical Phonons and Sublattice Screening in a Solid-State Ion Conductor

Solid-state electrolytes (SSEs) require ionic conductivities that are competitive with liquid electrolytes to realize applications in all-solid-state batteries. Although candidate SSEs have been discovered, the underlying mechanisms enabling superionic conduction (>1 mS cm –1 ) remain elusive. In particular, the role of ultrafast lattice dynamics in mediating ion migration, which involves couplings between ions, phonons, and electrons, is rarely explored experimentally at their corresponding time scales. To investigate the complex contributions of coupled lattice dynamics on ion migration, we modulate the charge density occupations within the crystal framework and then measure the time-resolved change in impedance on picosecond time scales for a candidate SSE, Li 0.5 La 0.5 TiO 3 (LLTO). Upon perturbation, we observe enhanced ion migration at ultrafast time scales. The respective transients match the time scales of optical and acoustic phonon vibrations, suggesting their involvement in ion migration. We further computationally evaluate the effect of a charge transfer from the O 2p to the Ti 3d band on the electronic and physical structure of LLTO. We hypothesize that the charge-transfer excitation distorts the TiO 6 polyhedra by altering the local charge density occupancy of the hopping site at the migration pathway saddle point, thereby causing a reduction in the migration barrier for the Li + hop. We rule out the contribution of photogenerated electron carriers and laser heating. Overall, our investigation introduces a new spectroscopic tool to probe fundamental ion hopping mechanisms transiently at ultrafast time scales, which has previously only been achieved in a time-averaged manner or solely via computational methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of polymer grain boundary passivation on organic–inorganic hybrid perovskite field-effect transistors

Despite successful applications of solution-processed organic–inorganic hybrid perovskites (OIHPs) such as archetypical methylammonium lead iodide (MAPI) in high-performance optoelectronic devices including solar cells and light emitting diodes, their application in field-effect transistors (FETs) remains relatively limited due to the unresolved issues caused by ion migration in OIHPs, such as screening of gate electric fields, lowered device on-off ratios and field-effect mobility, and large hysteresis in the FET transfer characteristics. Here, we report improved performances of the MAPI-based FET via a polymer-additive-based grain boundary (GB) passivation approach that suppresses the ion migration. Polycaprolactone (PCL) was incorporated into the MAPI FET as a GB-passivation additive as confirmed by scanning electron and atomic force microscopies. Unlike the typical n-type behavior and large transfer hysteresis in the starting, pristine MAPI FETs, the GB passivation by PCL led to a drastically reduced hysteresis in FET transfer characteristics, while hinting at an ambipolar transport and slight improvement in mobility, indicating a reduced ion migration in the PCL-incorporated MAPI FET. The effect of PCL GB passivation in suppressing ion migration was directly confirmed by the measured, increased activation energy for ion migration in the PCL-incorporated MAPI. Here, the results not only represent the first report of the polymer-additive-based mitigation of the ion migration in the MAPI FET but also suggest potential utilities of the approach for enabling high-performance OIHP FETs and electronic devices in general.

77 NANOSCIENCE AND NANOTECHNOLOGY↗