Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inverse scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nuclear Data to Reduce Uncertainties in Reactor Antineutrino Measurements

The large quantities of antineutrinos produced through the decay of fission fragments in nuclear reactors provide an opportunity to study the properties of these particles and investigate their use in reactor monitoring. The reactor antineutrino spectra are measured using specialized, large area detectors that detect antineutrinos through inverse beta decay, electron elastic scattering, or coherent elastic neutrino nucleus scattering; although, inverse beta decay is the only demonstrated method so far. Reactor monitoring takes advantage of the differences in the antineutrino yield and spectra resulting from uranium and plutonium fission providing an opportunity to estimate the fissile material composition in the reactor. Recent experiments reveal a deviation between the measured and calculated antineutrino flux and spectra (the reactor anomaly) indicating either the existence of yet undiscovered neutrino physics, uncertainties in the reactor source term calculation, incorrect nuclear data, or a combination of all three. To address the nuclear data that impact the antineutrino spectrum calculations and measurements, an international group of over 180 experts in antineutrino physics, reactor analysis, detector development, and nuclear data came together during the Workshop on Nuclear Data for Reactor Antineutrino Measurements (WoNDRAM) to discuss nuclear data needs and achieve concordance on a set of recommended priorities for nuclear data improvements. Three topical sessions focused on the reactor source term, the antineutrino spectrum, and the detector response, provided a forum to gain consensus amongst the participants on the most important data improvements to address two goals: 1) understand the reactor anomaly and 2) improve the ability to monitor reactors using antineutrinos. This report summarizes the outcomes of the workshop discussions and the recommendations for nuclear data efforts that reduce reactor antineutrino measurement uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Properties of states near 𝐸 𝑥 = 6 MeV in 18 Ne through 17 F +𝑝 scattering

The rate of energy production in the hot-CNO cycle and breakout to the rapid-proton capture process in Type I X-ray bursts is strongly related to the 14 O⁡(𝛼,𝑝)⁢ 17 F reaction rate. The properties of states in 18 Ne near 𝐸 𝑥 = 6.1–6.3 MeV are important for understanding the 14 O⁡(𝛼,𝑝)⁢ 17 F reaction rate. In order to study 18 Ne resonances around this energy region, the RESOLUT radioactive-ion beam facility at Florida State University was used to perform 17 F⁡(𝑝,𝑝)⁢ 17 F elastic scattering on a polypropylene target under inverse kinematics. Scattered protons were detected in a silicon-strip detector array while recoiling 17 F ions were detected in coincidence in a gas ionization detector. An 𝑅-matrix analysis of measured cross sections was conducted along with a reanalysis of data from previous 17 F +𝑝 measurements. All the data analyzed are well described by a consistent set of parameters with a 1 − assignment for a state at 6.14(1) MeV. A second comparable solution is also found with a 3 − assignment for the 6.14(1) MeV state. There is no conclusive evidence supporting one of the two solutions over the other. The rates of the 14 O⁡(𝛼,p)⁢ 17 F reaction that are determined from the two solutions differ by up to an order of magnitude.

6 ≤ A ≤ 19↗
DOE OSTI2022

Gamma-ray spectroscopy using angular distribution of Compton scattering

We present a novel method to perform gamma-ray spectroscopy suitable for extreme pileup situations, wherein traditional pulse-height spectroscopy is infeasible or impractical. One example of such application is spectral characterization of intense laser-based radiation sources that employ laser wakefield acceleration, in which a large number of photons can be produced in a well-collimated beam on a picosecond or shorter timescale. The method relies on the angularly-resolved calorimetric measurement of Compton scattering. The probability for a photon to undergo Compton scattering into a given solid angle is a function of its energy and is described by the Klein–Nishina formula. By first Compton scattering the incident beam and then measuring the total energies deposited in multiple detectors placed at various scattering angles, the incident beam energy spectrum can be reconstructed without resolving the individual events in detectors. Here, we compare the performance of an maximum likelihood expectation maximization algorithm with that of an artificial neural network to measure the energy spectrum of a beam of monoenergetic gamma rays from 137Cs decay. We demonstrate that the method can be used to reconstruct the characteristic inverse Compton scattering spectra.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Analytical desmearing of Bonse–Hart ultra-small-angle neutron scattering data via truncated Abel inversion

A non-iterative analytical framework based on the truncated Abel inversion is developed for desmearing Bonse–Hart ultra-small-angle neutron scattering (USANS) data. The method directly inverts the slit-averaged intensity without empirical extrapolation or iterative regularization, establishing a closed-form relationship between the measured and intrinsic scattering profiles. Numerical benchmarks on representative models, including a rigid-line form factor, a Lorentzian function and a fractal structural model, demonstrate quantitative recovery of the ground-truth intensity across the full Q range. Application to a deuterated polystyrene/poly(2-vinylpyridine) blend further confirms that the approach yields smooth continuous profiles consistent with companion small-angle neutron scattering data. The truncated Abel inversion thus provides a stable, model-independent and physically transparent route for accurate desmearing of Bonse–Hart USANS measurements.

Huang, Guan-Rong [National Tsing Hua University, T↗
DOE OSTI2025

Reconnection-driven Flares in M87*: Proton–Synchrotron-powered GeV Emission

Magnetic reconnection in current layers that form intermittently in radiatively inefficient accretion flows onto black holes is a promising mechanism for particle acceleration and high-energy emission. It has been recently proposed that such layers, arising during flux eruption events, can power the rapid TeV flares observed from the core of M87. In this scenario, inverse-Compton scattering of soft radiation from the accretion flow by energetic electron–positron pairs produced near the reconnection layer was suggested as the primary emission mechanism. However, detailed calculations show that radiation from pairs alone cannot account for the GeV emission detected by the Fermi observatory. In this work, we combine analytic estimates with 3D radiative particle-in-cell simulations of pair–proton plasmas to show that the GeV emission can be naturally explained by synchrotron radiation from protons accelerated in the current sheet. Although the exact proton content of the layer is uncertain, our model remains robust across a broad range of proton-to-pair number density ratios. While protons are subdominant in number compared to pairs, our simulations demonstrate that they can be accelerated more efficiently, leading to a self-regulated steady state in which protons dominate the energy budget. Ultimately, proton synchrotron emission accounts for approximately 5%–20% of the total dissipation power. The majority is radiated as MeV photons via pair synchrotron emission, with a smaller fraction emitted as TeV photons through inverse-Compton scattering.

Active galactic nuclei↗
DOE OSTI2021

Inversion of coherent surface scattering images via deep learning network

Coherent surface scattering imaging is a powerful tool for imaging a surface/interface of a thin nanostructure deposited on an opaque substrate. A mathematical conversion of an object image from a scattering pattern is essential for coherent surface scattering imaging to visualize structures of specimens. It has been achieved by using phase retrieval algorithms requiring oversampling in scattering patterns and employing alternating projection approaches. It is a computationally challenging and time-consuming process. In this paper, we demonstrate CSSI-NN, which is a deep learning neural network model to predict images of objects from scattering intensities in coherent surface scattering imaging. This model allowing for the instant outcome from scattering patterns would be tremendously beneficial not only for effective experiments but also for data analysis of phase retrieval.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Elastic scattering of 3 He + 4 He with the SONIK scattering chamber

Measurements of the elastic scattering cross section of 3 He and 4 He are important in order to improve constraints on theoretical models of 4 He ⁢( 3 He ,𝛾)⁢ 7 Be, a key reaction in Big Bang nucleosynthesis and solar neutrino production. The astrophysical 𝑆 factor for this reaction is a significant source of uncertainty in the standard-solar-model prediction of the 7 Be and 8 B solar neutrino fluxes. The elastic scattering measurements reported in the literature do not extend to low energies and lack proper uncertainty quantification. A new measurement of the 4 He ⁢( 3 He, 3 He)⁢ 4 He reaction has been made at center-of-mass energies 𝐸c.m.=0.38−3.13 MeV using the Scattering of Nuclei in Inverse Kinematics (SONIK) scattering chamber: a windowless, extended gas target surrounded by an array of 30 collimated silicon charged particle detectors situated at TRIUMF. This is the first elastic scattering measurement of 3 He + 4 He made below 500 keV and it has greater angular range and better precision than previous measurements. The elastic scattering data were analyzed using both 𝑅-matrix and halo effective field theory frameworks, and values of the 𝑠-wave scattering length and effective range were extracted. Here, the resulting improvement in knowledge of the 𝑠-wave effective-range function at low energies reduces the overall uncertainty in 𝑆 34 at solar energies.

Elastic scattering reactions↗
DOE OSTI2023

GRIDS-Net: Inverse shape design and identification of scatterers via geometric regularization and physics-embedded deep learning

This study presents a deep learning based methodology for both remote sensing and design of acoustic scatterers. The ability to determine the shape of a scatterer, either in the context of material design or sensing, plays a critical role in many practical engineering problems. This class of inverse problems is extremely challenging due to their high-dimensional, nonlinear, and ill-posed nature. To overcome these technical hurdles, we introduce a geometric regularization approach for deep neural networks (DNN) based on non-uniform rational B-splines (NURBS) and capable of predicting complex 2D scatterer geometries in a parsimonious dimensional representation. Then, this geometric regularization is combined with physics-embedded learning and integrated within a robust convolutional autoencoder (CAE) architecture to accurately predict the shape of 2D scatterers in the context of identification and inverse design problems. Further, an extensive numerical study is presented in order to showcase the remarkable ability of this approach to handle complex scatterer geometries while generating physically-consistent acoustic fields. The study also assesses and contrasts the role played by the (weakly) embedded physics in the convergence of the DNN predictions to a physically consistent inverse design.

42 ENGINEERING↗
DOE OSTI2025

X-Ray Spectra from General Relativistic Radiation Magnetohydrodynamic Simulations of Thin Disks

We compare X-ray emission from several general relativistic, multifrequency, radiation magnetohydrodynamic simulations of thin black hole accretion disks with different accretion rates and spins. The simulations were performed using the M1 closure scheme, resolved with 12 frequency (energy) bins logarithmically spaced from 5 × 10 −3 to 5 × 10 3 ​​​ keV. We apply a general relativistic Monte Carlo transport code to postprocess the simulation data with greater fidelity in frequency resolution and Compton scattering treatment. Despite the relatively few energy bins and Kompaneets approximation to Compton scattering utilized in the M1 method, we find generally good agreement between the methods. Both produce prominent thermal profiles with peaks around 2–2.5 keV, where agreement is particularly strong and representative of the soft state. Both also find weaker (lower-luminosity) thermally sourced emission extending out to 100 keV due to the hotter innermost regions of the disks. Inverse Compton scattering becomes increasingly effective at hardening spectral outputs with increasing black hole spin, and becomes the dominant mechanism for photons that escape with energies between 10 to several hundred keV. At very high rates of spin, the radiation flux in this upscattered component becomes comparable to the thermal flux, a phenomenon typically associated with intermediate states. Beyond 10 4 keV, we observe faint, free–free emission from hot, optically thin coronal regions developing near the horizon, common to both spinning and nonspinning black holes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Machine learning inversion from small-angle scattering for charged polymers

We develop Monte Carlo simulations for uniformly charged polymers and a machine learning algorithm to interpret the intra-polymer structure factor of the charged polymer system, which can be obtained from small-angle scattering experiments. The polymer is modeled as a chain of fixed-length bonds, where the connected bonds are subject to bending energy, and there is also a screened Coulomb potential for charge interaction between all joints. The bending energy is determined by the intrinsic bending stiffness, and the charge interaction depends on the interaction strength and screening length. All three contribute to the stiffness of the polymer chain and lead to longer and larger polymer conformations. The screening length also introduces a second length scale for the polymer besides the bending persistence length. To obtain the inverse mapping from the structure factor to these polymer conformation and energy-related parameters, we generate a large data set of structure factors by running simulations for a wide range of polymer energy parameters. We use principal component analysis to investigate the intra-polymer structure factors and determine the feasibility of the inversion using the nearest neighbor distance. We employ Gaussian process regression to achieve the inverse mapping and extract the characteristic parameters of polymers from the structure factor with low relative error.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Probing strong-field QED in beam-plasma collisions

Ongoing progress in laser and accelerator technology opens new possibilities in high-field science, notably to investigate the largely unexplored strong-field quantum electrodynamics (SFQED) regime where electron-positron pairs can be created directly from light-matter or even light-vacuum interactions. Laserless strategies such as beam-beam collisions have also been proposed to access the nonperturbative limit of SFQED. Here we report on a concept to probe SFQED by harnessing the interaction between a high-charge, ultrarelativistic electron beam and a solid conducting target. When impinging onto the target surface, the beam self fields are reflected, partly or fully, depending on the beam shape; in the rest frame of the beam electrons, these fields can exceed the Schwinger field, thus triggering SFQED effects such as quantum nonlinear inverse Compton scattering and nonlinear Breit-Wheeler electron-positron pair creation. Through reduced modeling and kinetic numerical simulations, we show that this single-beam setup can achieve interaction conditions similar to those envisioned in beam-beam collisions, but in a simpler and more controllable way owing to the automatic overlap of the beam and driving fields. This scheme thus eases the way to precision studies of SFQED and is also a promising milestone towards laserless studies of nonperturbative SFQED.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Principles and applications of x-ray light sources driven by laser wakefield acceleration

One of the most prominent applications of modern particle accelerators is the generation of radiation. In a synchrotron or an x-ray free electron laser (XFEL), high energy electrons oscillating in periodic magnetic structures emit bright x rays. In spite of their scientific appeal that will remain evident for many decades, one limitation of synchrotrons and XFELs is their typical mile-long size and their cost, which often limits access to the broader scientific community. Here, this tutorial reviews the principles and prospects of using plasmas produced by intense lasers as particle accelerators and x-ray light sources, as well as some of the applications they enable. A plasma is an ionized medium that can sustain electrical fields many orders of magnitude higher than that in conventional radio frequency accelerator structures and can be used to accelerate electrons. When short, intense laser pulses are focused into a gas, it produces electron plasma waves in which electrons can be trapped and accelerated to GeV energies. This process, laser-wakefield acceleration (LWFA), is analogous to a surfer being propelled by an ocean wave. Many radiation sources, from THz to gamma-rays, can be produced by these relativistic electrons. This tutorial reviews several LWFA-driven sources in the keV-MeV photon energy range: betatron radiation, inverse Compton scattering, bremsstrahlung radiation, and undulator/XFEL radiation. X rays from laser plasma accelerators have many emerging applications. They can be used in innovative and flexible x-ray imaging and x-ray absorption spectroscopy configurations, for use in biology, industry, and high-energy density science.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electron-beam–controlled deflection of near-infrared laser in semiconductor plasma

A timing method for experiments on the interaction of a near-infrared laser and an ultra-relativistic electron beam via a semiconductor plasma switch is experimentally validated. As an intermediate medium, a thin Si plate is excited by the energetic, intense electron beam to produce a semiconductor plasma, which in turn deflects counter-colliding laser light having 1 μm wavelength. An electron beam of sub-nC charge sufficiently induces the needed electron number density gradient of 1×10 20 cm -3 per tens of μm length at the interaction point. Demonstration during an inverse Compton scattering experiment by a counter-colliding electron beam of 300 pC and 70 MeV with an Nd: YAG laser at a wavelength of 1 μm is reported here.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Source size of x rays from self-modulated laser wakefield accelerators

A comparative study of x-ray sources generated with different mechanisms from self-modulated laser wakefield acceleration (SM-LWFA) electrons was performed to compare the source size or spatial resolution for use in high energy density science applications. We examine the source size of betatron, inverse Compton scattering, and bremsstrahlung radiation with a Fresnel diffraction based formalism and a modified x-ray ray tracing model. We observe the dependence of source size on the radiation generation process, laser parameters, and compare to what is possible in other regimes of LWFA, as well as current methods. This information is significant as we begin to explore the use of light sources driven by SM-LWFA for use as a diagnostic at large-scale laser facilities where blowout regime LWFA is not possible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

100th Anniversary of the Compton Effect: Its Discovery and Present-Day Impact on Nuclear Physics

This year is the 100th anniversary of the discovery of the Compton effect marked by A. H. Compton’s 1923 Physical Review article. On this occasion, we reflect on the effect’s impact on Nuclear Physics and celebrate the event a century ago and the eminent scientist who made the discovery. Much of the historical comments rely on the article by R. H. Stuewer. A recent Physics Today article presents a historical perspective of Compton’s work and provides more details. The various applications of the Compton effect and its “derivatives” (e.g. inverse Compton scattering) impact many areas of Physics and Chemistry. Here, this short article is restricted to examples taken from the authors' surroundings: the focus is on nuclear-structure experiments with γ-spectroscopic methods and nuclear cross-section measurements relevant for astrophysics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Diagnostic x-ray source using electrons produced by a 100 J-class picosecond laser

Many laser-based high-energy-density science (HEDS) facilities have one or more short-pulse (sub- to few-picosecond) laser beams for diagnostics. For the past decade, we have been developing a novel x-ray probing capability using such picosecond lasers interacting with an underdense plasma to produce relativistic electrons. The ultimate goal of these experiments is to demonstrate a new type of x-ray backlighter using the short-pulse ARC laser at the National Ignition Facility (NIF). Before this diagnostic is fielded at the NIF, it is critical to demonstrate the viability and reproducibility of the x-ray source on comparable high-power short-pulse laser systems. We present experiments that were carried out with the OMEGA EP laser at the University of Rochester’s laboratory for laser energetics. In these experiments, high-energy electrons are produced through a combination of the self-modulation instability and direct laser acceleration in an underdense gas jet. These electrons generate directional x-rays with characteristic energies up to several tens of keV as they execute betatron motion in the ion channel, and the inverse Compton scattering process generates even harder x-rays, with characteristic photon energies of 60–240 keV. When implemented on the OMEGA EP laser(s), this x-ray source yields results that are comparable to those obtained recently on the short-pulse Titan laser at the Jupiter Laser Facility at Lawrence Livermore National Laboratory, after accounting for differences in laser energy, peak intensity, focusing f/#, and plasma source. Applications of such an x-ray source for HEDS experiments are discussed.

backlighter↗
DOE OSTI2024

The cosmic-ray positron excess and its imprint in the Galactic gamma-ray sky

Abstract We study the origin of the positron excess observed in the local cosmic-ray spectrum at high energies, and relate it to the cosmic rays and gamma-ray emission across the entire Galaxy. In particular, we explore the hypothesis of a single, dominant source accountable for primary electron-positron pairs. Since we are agnostic about the physical nature of the underlying source population, we consider four models that are representative of young pulsars, old stars (as a tracer of millisecond pulsars), and annihilating dark matter particles. In the dark matter hypothesis, we consider both a cored and a cuspy model for the halo in the Milky Way. Then, we compare the associated gamma-ray sky maps withFermi-LAT data. We find that the emission arising from pulsar wind nebulae is fairly concentrated near the mid plane, and therefore additional cosmic-ray sources must be invoked to explain the emission at the center of the Galaxy. If the local positron excess were mainly due to millisecond pulsars, inverse Compton scattering by the particles injected would naturally account for a non-negligible fraction of the central gamma-ray emission. The same process would lead to a tension for a standard NFW dark matter profile, exceeding the gamma-ray data by almost a factor of 2 in some regions of the Galaxy. Although the results for an isothermal, cored profile are in agreement with these data, the cross section needed in both cases is around 2 orders of magnitude above the thermal cross-section, disfavouring the dark matter interpretation.

Astronomy & Astrophysics↗
DOE OSTI2022

IGR J18249−3243: a new GeV-emitting FR II and the emerging population of high-energy radio galaxies

ABSTRACT The advent of new all-sky radio surveys such as the VLA Sky Survey and the Rapid ASKAP Continuum Survey, performed with the latest generation radio telescopes, is opening new possibilities on the classification and study of extragalactic γ-ray sources, specially the underrepresented ones like radio galaxies. In particular, the enhanced sensitivity (sub-mJy level) and resolution (a few arcsec) provides a better morphological and spectral classification. In this work, we present the reclassification of a Fermi/Large Area Telescope (LAT) source as a new Fanaroff–Riley II radio galaxy from the International Gamma-Ray Astrophysics Laboratory sample found to emit at GeV energies. Through a broad-band spectral fitting from radio to γ-ray, we find that the commonly invoked jet contribution is not sufficient to account for the observed γ-ray flux. Our modelling suggests that the observed emission could mainly originate in the lobes (rather than in the radio core) by inverse Compton scattering of radio-emitting electrons off the ambient photon fields. In addition, we cross-correlated the latest generation radio surveys with a list of Fermi/LAT candidate misaligned AGN from the literature, finding four new radio galaxies with a double-lobed morphology. Additional four objects could be classified as such thanks to previous studies in the literature, for a total of nine new radio galaxies with GeV emission presented in this work. We foresee that further objects of this class might be found in the near future with the advent of the Square Kilometer Array, populating the GeV sky.

Bruni, G. (ORCID:0000000251826289)↗