Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “internal combustion engine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

System Analysis of an Internal Combustion Engine (ICE) - Solid Oxide Fuel Cell (SOFC) Hybrid Cycle

The variability of renewable energy sources poses challenges for reliable grid operation. Conventional thermal power sources, though reliable, often lack operational flexibility. Hybrid energy systems that integrate Solid Oxide Fuel cells (SOFC) with Internal Combustion Engines (ICE) offer a promising solution by achieving relatively higher efficiency and grid-following capability. This study investigates performance of a 100-kW pressurized SOFC-ICE hybrid cycle. In this configuration, unutilized SOFC fuel is used to drive the engine, with a turbocharger providing air supply and an external reformer generating syngas. System components were numerically modeled using MATLAB/SIMULINK for the SOFC and reformer, and EBSILON® for the ICE and balance of plant. Parametric studies varied fuel utilization (70-90%), reformer temperature (600 – 1000K), anode off-gas recirculation (0 – 70%), and current density (0.2 – 0.55 A/cm2). Results show that the SOFC and ICE operate as thermally independent topping and bottoming cycles, achieving peak efficiency of 62% under optimized conditions.

hybrid↗
DOE OSTI2021

Sensor System and Observer Algorithm Co-Design For Modern Internal Combustion Engine Air Management Based on H2 Optimization

This paper outlines a novel sensor selection and observer design algorithm for linear time-invariant systems with both process and measurement noise based on H 2 optimization to optimize the tradeoff between the observer error and the number of required sensors. The optimization problem is relaxed to a sequence of convex optimization problems that minimize the cost function consisting of the H 2 norm of the observer error and the weighted l 1 norm of the observer gain. An LMI formulation allows for efficient solution via semi-definite programing. The approach is applied here, for the first time, to a turbo-charged spark-ignited engine using exhaust gas circulation to determine the optimal sensor sets for real-time intake manifold burnt gas mass fraction estimation. Simulation with the candidate estimator embedded in a high fidelity engine GT-Power model demonstrates that the optimal sensor sets selected using this algorithm have the best H 2 estimation performance. Sensor redundancy is also analyzed based on the algorithm results. This algorithm is applicable for any type of modern internal combustion engines to reduce system design time and experimental efforts typically required for selecting optimal sensor sets.

Zhang, Xu↗
DOE OSTI2026

N 2 O Formation Mechanism and Suppression Strategy on Pt Catalysts for NO x Removal from Hydrogen-Internal Combustion Engines

Pt-based catalysts exhibit excellent low-temperature activity in the selective catalytic reduction of NO x with H 2 (H 2 -SCR), but their tendency to form N 2 O poses a significant challenge for practical use. This issue is further complicated by unclear formation mechanisms, hindering the development of more efficient catalysts. This study explored the N 2 O generation mechanisms on Pt catalysts supported by MgO, Al 2 O 3 , SiO 2 , and TiO 2 , aiming to achieve a deep understanding that could advance the Pt catalysts with high NO x conversion and minimized N 2 O emissions. Through systematic kinetics and characterization analyses, the direct influence of the support acidity and reactant dynamics (O 2 and NO) on N 2 O formation was clearly revealed. Notably, the Pt catalysts with strong NO adsorption capacity showed reduced N 2 O generation, highlighting the critical role of NO adsorption sites in the H 2 -SCR process. By incorporation of NO adsorption sites (i.e., MgO, BaO, CeO 2 ) onto Pt/SiO 2 , both the H 2 -SCR efficiency and N 2 selectivity (reduced N 2 O selectivity) were significantly enhanced, effectively reducing the N 2 O emissions through optimized surface NO adsorption. These findings provide a design framework for more selective Pt-based catalysts, advancing H 2 -SCR systems for effective NO x abatement from hydrogen-internal combustion engines, which is a promising carbon-free transportation technology.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Piston for use in internal combustion engines and method of making the piston

An additive manufactured piston having a crown portion and a skirt portion form of an aluminum-cerium-silicon alloy. The piston includes a least one recess pocket in an unstressed region located at an interface between an inner surface of the crown portion and an outer surface of the skirt portion. The skirt portion includes an outer panel surface defining an external rib adjacent a peripheral end surface, at least one stiffening rib extending from a pin boss to a skirt end, and a wall thickness of between 0.2 mm and 1.0 mm in a region between the external rib and the at least one stiffening rib. The skirt portion further includes an internal first rib having a width W1 on a thrust side portion and an internal second rib having a width W2 located on an anti-thrust side portion, in which W1 is greater than W2.

Petrus, Ronald John↗
DOE OSTI2021

An improved Method for Determining Transient Fuel Dilution of Oil in an Internal-Combustion Engine Using Laser-Induced Florescence and Multivariate Least Square Calibration

An optical diagnostic, based on laser-induced fluorescence (LIF), has been developed for on-engine measurements of real-time fuel dilution of engine oil or fuel in oil (FIO). Fuel dilution of oil is broadly relevant to advancing engine technology including durability, calibration, and catalyst-system management, and believed to promote destructive stochastic pre-ignition (SPI) during high-load engine operations. While standard (e.g., ASTM D3524-90) methods are not capable of real-time transient measurements, the LIF technique resolves transient dilution on the minutes time scale. We have expanded on our original FIO instrument development by introducing an improved analysis based on multivariate least square chemometrics analysis. The measurement uses a fuel dye (180–1300 parts per million, by mass) and monitors for its presence in the oil using 532 nm excitation and LIF. While the original FIO instrument utilized a two-color ratio method for analysis, the improved chemometric analysis uses the fully resolved LIF dye spectra to provide better predictive FIO accuracy (>92%) over a wide FIO range (1.5–14%) typical of engine application. We also investigate the effect of oil temperature on the LIF signal. Limited engine applications for demonstrating and validating the improved FIO instrument are shown, and the related data used to quantify practical detection limit and sensitivity. The improved analysis is insensitive to laser power fluctuation and change in detector integration time, providing an excellent FIO sensitivity (1–2%) and detection limit (0.01 %FIO) over a wide range of loads and injection timings, illustrating this updated approach to be a promising tool for advancing engine technology.

42 ENGINEERING↗
DOE OSTI2023

On-Demand Reactivity Enhancement to Enable Advanced Low Temperature Natural Gas Internal Combustion Engines

This research project set the groundwork for higher technology readiness level implementations of catalytic OCM pretreatment for NG engines. Future work to use OCM as a fuel pretreatment strategy for NG engines should consider catalyst durability and performance over a higher working temp range. Work should also develop robust and practical reactors that can be efficiently thermally integrated with a NG engine.

03 NATURAL GAS↗
DOE OSTI2025

Rationally Designed Lithium Ion Batteries Towards Displacing Internal Combustion Engines

Group14 Technologies is leading a word-class team composed of Cabot Corporation, Silatronix, Arkema, Pacific Northwest National Laboratories, and Farasis Energy to research, fabricate, test and demonstrate lithium-ion batteries (LIB) implementing ≥30% silicon-carbon (Si-C) composite anode material achieving aggressive next generation automotive energy targets.

25 ENERGY STORAGE↗
DOE OSTI2023

Internal combustion engine with dual-channel cylinder liner cooling

A cylinder liner is provided that includes a cylinder bore capable of housing a piston, a top end having an annular flange, a first cylindrical section, a second cylindrical section, and an annular ridge that separates the first cylindrical section and the second cylindrical section. When employed in an a liner bore of an engine bock, the cylinder liner provides for two channels that allow for coolant to be supplied to the cylinder liner.

Chen, Allen Yao↗
DOE OSTI2024

On the importance of species immiscibility in mixing-layer dynamics at supercritical pressures

The mixing dynamics of injected propellants is a key factor in determining the ignition performance and combustion-instability response of rocket engines, internal combustion engines, and gas turbines. A key source of uncertainty in the prediction of phase-exchange dynamics is the immiscibility of the injected propellants at supercritical pressure conditions, which induces liquid/vapor phase separation and surface-tension dynamics. While experimental observations indicate the presence of liquid/vapor interfacial structures, this interfacial dynamics is typically neglected in numerical analyses. To address this issue, the objective of the present study is to systematically evaluate the importance of species immiscibility on the phase-exchange dynamics of cryogenic LOX/GH2 mixing layers at typical rocket engine injection conditions. This is accomplished by comparing simulations of (i) a recently developed interface-capturing Regularized-Interface Method (RIM) formulation, and (ii) the commonly employed Diffuse-Interface Method (DIM) formulation. Analysis shows that the interfacial dynamics significantly impact the atomization and mixing of the propellants in the near-injector region, which is not captured by the DIM formulation. The findings of this study extend to other immiscible injection systems, such as LOX/kerosene and hydrocarbon-fuel/air, thereby highlighting the importance of resolving species immiscibility in simulating high-pressure combustion engines.

diffused-interface method↗
DOE OSTI2022

Engine and fuel cell system including first and second turbochargers

An engine system includes an internal combustion engine, a fuel cell system, a first turbocharger and a second turbocharger. The internal combustion engine has an intake passage, and a first exhaust passage fluidly connected to the first set of combustion chambers. The first turbocharger has a first compressor and a first turbine. The second turbocharger has a second compressor and a second turbine, the second compressor connected in series with the first compressor, and the second turbine being in fluid communication with the second exhaust passage. The first and second turbines are connected in parallel such that the first turbine only receives exhaust flow from the fuel cell system, and the second turbine only receives exhaust flow from the internal combustion engine.

Lusardi, Christopher↗
DOE OSTI2023

Neutronic engine

An internal combustion engine for neutron diffraction analysis is provided. The engine includes an elongated piston chamber formed from an aluminum alloy to ensure maximum neutron visibility into the combustion chamber. An elongated piston assembly reciprocates within the elongated piston chamber, the piston assembly including an upper piston joined to a lower piston. The upper piston and the lower piston are hollow, thereby reducing the reciprocating mass and increasing neutron access to the combustion chamber. The upper piston is lubricated with a neutron-transparent fluorocarbon lubricant such as perfluoropolyether (PFPE), while the lower piston and the crankcase are lubricated with hydrocarbon lubricant. The engine enables 3D and time-resolved measurements of strain, stress, and temperature, as well as phase transformation, texture, and microstructure.

Wissink, Martin L.↗