Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Molecular Insights into Novel Struvite–Hydrogel Composites for Simultaneous Ammonia and Phosphate Removal

Struvite (NH 4 MgPO 4 ·6H 2 O) mineralization is an effective technique for removing ammonium and phosphate species from wastewater. However, its wider use faces obstacles because of the copresence of various pollutants in wastewater and the additional requirement for magnesium to achieve proper supersaturation conditions. To address these challenges, this study developed novel mineral–hydrogel composites that can remove ammonium and phosphate simultaneously via heterogeneous struvite and calcium phosphate (CaP) mineralization in hydrogel matrices. The composites include in situ formed struvite and CaP mineral seeds, decreasing the nucleation energy barrier of struvite and CaP formation and promoting their heterogeneous nucleation kinetics even under undersaturation conditions in bulk solution. The dual struvite and CaP seeded composites can simultaneously reduce the ammonium and total phosphate concentrations up to 60% (26.3 mg of N/g) and 91% (9.54 mg of P/g), respectively. Furthermore, the average particle sizes in composites were increased from 6.12 to 14.8 nm after wastewater treatment. Moreover, various ions commonly existing in wastewater did not significantly interfere with the removal of ammonium and phosphate. Thus, these new mineral–hydrogel composites can provide an innovative way to lower nutrient levels before discharge to streams. Moreover, encapsulating ammonium and phosphate in mineral-hydrogel composites enables their upcycling in agricultural or biorefinery applications.

Cations↗
DOE OSTI2025

High-Density, Low-Hysteresis Storage Using Hydrated Salts in Surface-Functionalized Hydrogels (Final Technical Report)

Nearly 70 years ago, Glauber’s salt was identified as a leading phase change material (PCM) in terms of its heat storage density (~2x paraffin), thermal conductivity (~1W/m·K), safety, availability and cost (~$\$$100/ton). However, the complex issues of supercooling and incongruent melting due to phase separation have prevented realization of the promise. The addition of thickeners and nucleating agents such as borax solve these issues but only over few cycles. This work aims to (a) resolve long-standing challenges with Glauber’s salt as a thermal storage material through a unique materials approach, (b) to characterize the new material’s properties that are relevant to performance and (c) to explore its incorporation into commercial water heaters. The materials concept involves encapsulating the salt in custom-designed, large-mesh hydrogels that enable breakthrough advances. Specifically, (1) the choice of mesh size and polymer chemistry control diffusion of salt/water and help to eliminate phase segregation. With the hydrogel itself occupying <10% volume, there is little loss in storage density compared to another encapsulation. (2) Specific nucleation centers that covalently tether to the hydrogel trigger heterogeneous nucleation, eliminating supercooling-associated hysteresis losses. The fact that they are spatially tethered, prevents the loss in performance over multiple freeze/thaw cycles (>100). We report extensive characterization of the hydrogel complex in terms of its storage density, freezing/melting temperature, cycling losses, rheological properties, aging and thermal conductivity. The novel material developed in this work is a significant advancement over the state-of-art. Finally, we investigate its potential as a thermal storage material for commercial/residential water heating and identify scenarios in which its deployment is advantageous.

25 ENERGY STORAGE↗
DOE OSTI2024

Fuel‐Driven π‐Conjugated Superstructures to Form Transient Conductive Hydrogels

Despite advances in creating dissipative materials with transient properties, such as hydrogels and active droplets, their application remains confined to temporal changes in structural properties. Developing out-of-equilibrium materials whose electronic functions are parameterized by a chemical reaction cycle is challenging. Yet, this class of materials is required to construct biomimetic materials. In contrast to traditional chemical reaction cycles that exploit molecularly dissolved building blocks at thermodynamic equilibrium, we show that fiber structures derived from reactive naphthalene diimide (NDI) building blocks can be used as resting states to form far-from-equilibrium conductive hydrogels after the addition of chemical fuels. Upon fueling the NDI-derived fibers, a dual-component activation and deactivation pathway is deduced by kinetic analysis and is absent when using a molecularly dissolved resting state. Investigating the solid-state morphologies of the structures formed throughout the fuel-driven reaction cycle using cryo-EM reveals that the resting thermodynamic fibers evolve to transient thicker fibrils and layered superstructures. We show that the transient redox-active hydrogels exhibit a nearly threefold increase in electrical conductivity upon fuel consumption before reverting to their original value over hours. In conclusion, these far-from-equilibrium materials are potential candidates in applications such as programmable biorobotics and chemical computing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Growth-induced Donnan exclusion influences swelling kinetics in highly charged dynamic polymerization hydrogels

Polymeric gels crosslinked by DNA sequences can exploit DNA strand-displacement reactions to promote swelling through dynamic polymerization. The degree of swelling and the rate of swelling must be directly tunable to achieve the promise of programmable soft matter. Though the kinetics of the strand-displacement reaction provide insertion rates up to 10 4 /Molar/second as measured in bulk solution, DNA hydrogel swelling can take upwards of 30 h to complete. Computational modeling of the reaction-induced swelling of these gels with our recently-developed reactive electrochemomechanical theory (Zimmerman et al., 2024) suggests that their extraordinarily slow swelling is partly due to a scaling mismatch between the addition of charge and the addition of fluid volume, leading to a large transient increase in the fixed charge density. The significant increase in the gel’s fixed charge density, due to the binding of negatively charged DNA, sharply restricts the concentration of mobile hairpins through the phenomenon of Donnan charge exclusion, an effect commonly exploited in nanofiltration applications using polymeric membranes. The scaling problem is overcome when the mean additional swelling provided to the hydrogel by addition of a crosslink is above a critical value, thus the swelling outpaces the charge accumulation, leading the fixed charge density to drop and significantly accelerating the swelling process. This study shows that Donnan exclusion can explain the kinetics of DNA hydrogel swelling, and studies ways to modulate the reaction speed by either modifying the salt concentration or increasing or decreasing the number of base pairs in each DNA sequence.

42 ENGINEERING↗
DOE OSTI2026

Coarse-Grained Simulations of Polyrotaxane Hydrogels under Quiescent and Shear Conditions

Cyclodextrin-based polyrotaxanes (PR) form hydrogels in water through cyclodextrin (CD) aggregation and crystallization. These networks can break under shear flows, making them versatile platforms for extrusion-based 3D printing. To optimize the material properties of 3D-printed PR gels, a microscopic understanding of the structural evolution during 3D printing is necessary. Here, we employ coarse-grained (CG) simulations to reveal the PR assembly process at the molecular level. Our simulations reproduce the experimental crystal morphologies of PR at varying concentrations and chain lengths under quiescent conditions. Using nonequilibrium simulations, we show shear flow ruptures crystalline domain connectivity in PR gels and stacks the lamellae in the gradient direction, allowing the materials to flow during 3D printing. After the cessation of flow, the anisotropic crystal alignment and absence of available dangling PR diminish the intercrystal connectivity. The printed materials are therefore mechanically weaker than the pristine hydrogels, in agreement with experimental results. Nonetheless, by relating the microscopic structural evolution with viscoelastic properties of PR gels and solutions, we elucidate how flow conditions and sample composition affect the 3D printing performance of PR hydrogels.

Smith, Cameron D. [Dartmouth College, Hanover, NH ↗
DOE OSTI2025

Photoresponsive polymers for carbodiimide-fueled transient hydrogels

Light- and carbodiimide-responsive hydrogels were synthesized. An “AND” gate was developed using ortho-nitrobenzyl (ONB) protected carboxylic acids in the polymer backbone. Crosslinking was only realized in the presence of both UV stimulus to photocleave the ONB group and carbodiimide fuels to induce anhydride bonds. In the presence of water, the anhydride bonds eventually hydrolyze to carboxylic acids and the system returns to the solution state. The mechanical properties of the out-of-equilibrium hydrogels were investigated using oscillatory rheology to examine the effects of deprotection efficiency, carbodiimide concentration and chain architecture on the hydrogels’ moduli and decrosslinking time. Higher moduli and longer decrosslinking times were found with increased carbodiimide concentration and deprotection efficiency. These discoveries unveil new possibilities for photoresponsive chemically fueled soft materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Autonomous phototaxis of hydrogel swimmers

The design of synthetic soft matter capable of emulating the complex behaviors of living organisms, such as sensing and adapting to their environment, remains an important challenge in developing biomimetic materials. Functionalized hydrogels are ideal candidates for such materials since they are highly responsive to their environment and can be operated in water. In this work, we investigate a hybrid bonding hydrogel composed of peptide amphiphile supramolecular nanofibers covalently attached to a photoresponsive network, in which high-aspect-ratio ferromagnetic nanowires are aligned along the length of the sample, designed to swim under oscillating magnetic fields. This hybrid hydrogel swimmer can autonomously swim toward a light source by utilizing photoinduced interactions between supramolecular and covalent networks reminiscent of phototactic swimming in living systems. Using a combination of experimental techniques and a continuum model incorporating photochemistry, magnetoelasticity, and hydrodynamics, we explain the swimming mechanism and predict phototactic behavior. Our work highlights the potential role of hybrid bonding polymers, which leverage the interplay between supramolecular assemblies and covalent networks. We demonstrate how these polymers can be tailored to react dynamically to their environment, paving the way for developing intelligent and autonomous robotic systems.

Science & Technology - Other Topics↗
NASA NTRS2013

Hydrogels with covalent and noncovalent crosslinks

A method for targeted delivery of therapeutic compounds from hydrogels is presented. The method involves administering to a cell a hydrogel in which a therapeutic compound is noncovalently bound to heparin. The hydrogel may contain covalent and non-covalent crosslinks.

Kilck, Kristi L.↗
NASA NTRSDate not supplied

Enabling Single Cell Research in Hollow Hydrogel Microparticles

Studying biology at the single cell level enables novel discoveries through ultra-high throughput identification and isolation of rare cells and interesting subpopulations. Encapsulation of single cells in hollow hydrogel microparticles, or PicoShells, enables easy visualization, manipulation, and assaying of single cells. The PicoShell’s porous hydrogel shell allows diffusion of nutrients and wastes into and out of the hollow liquid core, allowing uninhibited cell growth. The porous shell also allows diffusion of assay reagents, enabling solution changes, and multi-step assays. Finally, single cells and their progeny can be tracked through time, for example to measure single cell growth rates. However, PicoShells are fabricated using microfluidic techniques, which require specialized expertise, equipment, and facilities. This limits PicoShell’s widespread utility for single cell biology. For Saccharomyces cerevisiae and other desiccation-tolerant microbes, desiccating PicoShells containing cells of interest offers a solution, enabling those without microfluidic capabilities to obtain dried, shelf-stable PicoShells containing their cells of interest from a specialized microfluidics facility. Researchers could then rehydrate the PicoShells and perform their single cell assays, bypassing the microfluidic steps. Desiccated PicoShells could also be flown in space, where desiccation is already a common practice for microbes (i.e. BioSentinel and BioNutrients), bringing single cell analysis capabilities to space. In this work, we develop a method to desiccate PicoShells containing S. cerevisiae while maintaining characteristics similar to fresh, non-desiccated PicoShells. We show good microparticle morphology and hydrogel pore size as well as high yeast viability in line with previous studies. We also demonstrate sorting of a fast-growing yeast population using size-based filtration, as S. cerevisiae in PicoShells are able to physically stretch the microparticle as they grow, increasing the PicoShell diameter. These efforts contribute to the feasibility of leveraging microparticle PicoShells for single cell space biology research on Earth and in space.

Simon Ng↗
DOE OSTI2024

Responsive‐Hydrogel Aquabots

Abstract It remains a challenge to produce soft robots that can mimic the responsive adaptability of living organisms. Rather than fabricating soft robots from bulk hydrogels,hydrogels are integrated into the interfacial assembly of aqueous two‐phase systems to generate ultra‐soft and elastic all‐aqueous aquabots that exhibit responsive adaptability, that can shrink on demand and have electrically conductive functions. The adaptive functions of the aquabots provide a new platform to develop minimally invasive surgical devices, targeted drug delivery systems, and flexible electronic sensors and actuators.

42 ENGINEERING↗
DOE OSTI2024

Increasing aggregate size reduces single-cell organic carbon incorporation by hydrogel-embedded wetland microbes

Abstract Microbial degradation of organic carbon in sediments is impacted by the availability of oxygen and substrates for growth. To better understand how particle size and redox zonation impact microbial organic carbon incorporation, techniques that maintain spatial information are necessary to quantify elemental cycling at the microscale. In this study, we produced hydrogel microspheres of various diameters (100, 250, and 500 μm) and inoculated them with an aerobic heterotrophic bacterium isolated from a freshwater wetland (Flavobacterium sp.), and in a second experiment with a microbial community from an urban lacustrine wetland. The hydrogel-embedded microbial populations were incubated with 13C-labeled substrates to quantify organic carbon incorporation into biomass via nanoSIMS. Additionally, luminescent nanosensors enabled spatially explicit measurements of oxygen concentrations inside the microspheres. The experimental data were then incorporated into a reactive-transport model to project long-term steady-state conditions. Smaller (100 μm) particles exhibited the highest microbial cell-specific growth per volume, but also showed higher absolute activity near the surface compared to the larger particles (250 and 500 μm). The experimental results and computational models demonstrate that organic carbon availability was not high enough to allow steep oxygen gradients and as a result, all particle sizes remained well-oxygenated. Our study provides a foundational framework for future studies investigating spatially dependent microbial activity in aggregates using isotopically labeled substrates to quantify growth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Programmable hydrogels by combining persistent and transient dynamic bonds

Out-of-equilibrium chemistry is currently being applied to polymer systems to mimic the autonomous behavior of biological materials. In this study, hydrogels with self-healing properties were developed that combine persistent crosslinks from dynamic metal-ligand coordination with transient crosslinks from dynamic anhydride bonds. Polymers containing terpyridine ligands and carboxylic acid groups were synthesized and crosslinked with divalent metal ions (Fe 2+ , Ni 2+ , Co 2+ , Zn 2+ , Cu 2+ ). The coordination bonds from terpyridine–metal coordination impart persistent stability, while transient anhydrides formed on treatment with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) temporarily increase crosslink density. Distinct behaviors are observed depending on the choice of metal, with Ni 2+ forming robust, stable networks; Zn 2+ creating moderately dynamic gels; and Cu 2+ yielding highly dynamic, soft materials. Treatment with EDC increased storage moduli significantly, with transient effects lasting up to 280 min depending on the metal ion. Self-healing experiments demonstrated independent contributions from metal coordination and transient anhydrides, enabling recovery of stress and strain under varying conditions. Additionally, complex and reversible 2D stiffness patterns were generated by spatially controlled EDC treatment of Zn 2+ and Cu 2+ hydrogel films, demonstrating programmability and reusability.

Rajawasam, Chamoni W. H. [Miami University, Oxford↗
DOE OSTI2026

Surface-Initiated Atom Transfer Radical Polymerization Using Hydrogel Reactors

Atom transfer radical polymerization (ATRP) is a controlled radical polymerization method that enables the synthesis of tailored polymeric materials with low dispersity, highlighting its immense potential for green fabrication of advanced materials. However, its broader implementation is limited by challenges in product isolation, maintaining catalyst activity, and mitigating atmospheric sensitivity arising from oxygen-sensitive metal catalysts. Here, gelatin hydrogels (GHs) are introduced as a soft “reactor” matrix for interfacial ATRP, operating with minimal metal-catalyst loading while exhibiting possibly an organoreductive behavior. This strategy leverages activator regeneration via electron transfer through a ligand–metal charge-transfer (LMCT) mechanism to reduce oxidized metal catalysts within the GH network. Polymerization is evaluated by growing polymer brushes at an active interface formed between GHs swollen in monomer solution and an initiating surface, and sequential growth experiments confirmed that GH-mediated ATRP preserves living character. Under UV illumination, LMCT is activated, producing polymers both at the desired interface and within the GH bulk. UV–Vis spectroscopy revealed active reduction of Cu(II) to Cu(I) along with concentration-dependent complex formation, indicating dynamic coordination chemistry within the hydrogel. The redox-active arginine- and glutamic acid-rich gelatin backbone coordinates and reduces the metal center, enabling ATRP at ppm-level catalyst concentrations. While polymerization proceeds in GH-Cu(II) reactors, adding external mobile ligands to the GH results in longer polymer brushes. Here, the results reported here are exploratory. More experiments are needed to characterize polymer brush growth in GHs and compare it to conventional surface-initiated polymerization in solution.

Absorption↗
NASA NTRS2010

Use of Nanofibers to Strengthen Hydrogels of Silica, Other Oxides, and Aerogels

Research has shown that including up to 5 percent w/w carbon nanofibers in a silica backbone of polymer crosslinked aerogels improves its strength, tripling compressive modulus and increasing tensile stress-at-break five-fold with no increase in density or decrease in porosity. In addition, the initial silica hydrogels, which are produced as a first step in manufacturing the aerogels, can be quite fragile and difficult to handle before cross-linking. The addition of the carbon nanofiber also improves the strength of the initial hydrogels before cross-linking, improving the manufacturing process. This can also be extended to other oxide aerogels, such as alumina or aluminosilicates, and other nanofiber types, such as silicon carbide.

Meador, Mary Ann B.↗
DOE OSTI2024

Prioritization of Early-Stage Research and Development of a Hydrogel-Encapsulated Anaerobic Technology for Distributed Treatment of High Strength Organic Wastewater

This study aims to support the prioritization of research and development (R&D) pathways of an anaerobic technology leveraging hydrogel-encapsulated biomass to treat high-strength organic industrial wastewaters, enabling decentralized energy recovery and treatment to reduce organic loading on centralized treatment facilities. To characterize the sustainability implications of early-stage design decisions and to delineate R&D targets, an encapsulated anaerobic process model was developed and coupled with design algorithms for integrated process simulation, techno-economic analysis, and life cycle assessment under uncertainty. Across the design space, a single-stage configuration with passive biogas collection was found to have the greatest potential for financial viability and the lowest life cycle carbon emission. Through robust uncertainty and sensitivity analyses, we found technology performance was driven by a handful of design and technological factors despite uncertainty surrounding many others. Hydraulic retention time and encapsulant volume were identified as the most impactful design decisions for the levelized cost and carbon intensity of chemical oxygen demand (COD) removal. Encapsulant longevity, a technological parameter, was the dominant driver of system sustainability and thus a clear R&D priority. Ultimately, we found encapsulated anaerobic systems with optimized fluidized bed design have significant potential to provide affordable, carbon-negative, and distributed COD removal from high strength organic wastewaters if encapsulant longevity can be maintained at 5 years or above.

Anaerobic Treatment↗
DOE OSTI2024

3D Printing of Functional Hydrogel Devices for Screenings of Membrane Permeability and Selectivity

Developing a fundamental understanding of the effects of varying ligand chemistries on mass transport rates is key to designing membranes with solute-specific selectivity. While permeation cells offer a robust method to characterize membrane performance, they are limited to assessing a single membrane chemistry or salt solution per test. As a result, investigating the effects of varying ligand chemistries on membrane performance can be a tedious process, involving both the preparation of multiple samples and numerous, time-consuming permeation tests. This study uses digital light processing (DLP) 3D printing to fabricate a millifluidic flow-based permeation device made from a hydrogel active ester network that can be easily functionalized with ion-selective ligands. Without the need for bonding or assembly steps, ligands can be introduced and tested in the permeation device by simply injecting a small volume of a ligand solution. Various salt concentrations and molecular species can be cycled through a single device by switching the solution feeding into the salt reservoir, thereby reducing the number of samples needed for permeability and selectivity screenings. This research sets the groundwork for formulation development and postprocessing methods to 3D-print functional millifluidic devices capable of assessing solute selectivity in membranes and polymer adsorbents for aqueous separations. In this work, comparable salt permeability trends were observed with both 3D-printed devices and traditional assays. Devices were functionalized with an imidazole ligand to investigate salt permeability and selectivity of monovalent and divalent salts. Measurements showed increasing permeability for monovalent salts (NaCl) relative to divalent salts (MgCl 2 , CuCl 2 ) in functionalized membranes, with higher monovalent/divalent selectivity at increasing imidazole grafting densities. Here, the methods and findings described here represent a step toward developing higher-throughput methods with 3D-printed devices for screening the effects of ligand chemistry on mass transport rates in membrane materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Pyrodictium abyssi AbpX reveals a calcium-responsive family of microbial biomatrix proteins that form thermostable hydrogels

Evolutionary pressure on microbial communities propagating under extreme environmental conditions often results in unique structural adaptations to promote cell survival. In this work, we report an investigation of AbpX, a biomatrix protein identified in cultures of the hyperthermophilic archaeon Pyrodictium abyssi. Under ex vivo and in vitro conditions, AbpX assembles into a paracrystalline lattice composed of semiflexible fibrils. CryoEM analysis of recombinant AbpX fibrils reveals that the precursor protein polymerizes through donor strand complementation (DSC), a process previously reported for chaperone-usher fimbriae in Gram-negative bacteria. Unlike the latter DSC protein polymers, AbpX undergoes chaperone-free polymerization in the presence of calcium ions, which are sequestered at the donor strand-acceptor groove interface between protomers in the fibril. Using a combination of cryoEM and crystallographic information, a structural model is proposed for the AbpX lattice that provides insight into its potential role in biofilm formation. These findings suggest that calcium ion coordination may contribute to fibril assembly and preorganize fibrils for incorporation into the protein lattice. Bioinformatic analysis indicates that AbpX exemplifies a distinct and broadly distributed clade of calcium ion responsive biomatrix proteins within the TasA superfamily that can be fabricated into hydrogel biomaterials in vitro under environmentally benign conditions.

59 BASIC BIOLOGICAL SCIENCES↗