Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “history variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Mechanisms of fatigue damage in boron/aluminum composites

Tensile fatigue tests were conducted on several laminates of boron/aluminum (6061-0). In laminates with 0 deg fibers on the outside, an analysis that identifies "shakedown" conditions predicted the stress amplitude below which no fatigue damage accumulated. A fatigue damage accumulation model which relates matrix fatigue cracking and the overall laminate properties is described. A model for the saturation damage stage development is presented, that identical laminates, tested in directions 90 deg apart (such that one layup has 90 deg outer plies and the other 0 deg), have different fatigue behaviors due to the stacking sequence. The 90 deg plies on the surface develop cracks earlier than predicted by shakedown. An attempt was made to explain this stacking sequence effect. Variable load history effects on the fatigue damage response were investigated. Tests reveal that for a given stress ratio the specimen seeks the saturation damage state for the largest stress range to which it is subjected. It was also found that little damage is generated by shifting a given stress range down, whereas significant damage may be created by shifting it upward. The laminate stresses were always tensile.

Johnson, W. S.↗

Atmospheric heating of meteorites: Results from nuclear track studies

A quantitative model to estimate the degree of annealing of nuclear tracks in mineral grains subjected to a variable temperature history was proposed. This model is applied to study the track annealing records in different meteorites resulting from their atmospheric heating. Scale lengths were measured of complete and partial track annealing, delta X sub 1 and delta X sub 2, respectively. In mineral grain close to fusion crust in about a dozen meteorites. Values of delta X sub 1 and delta X sub 2 depend on extent and duration of heating during atmospheric transit and hence on meteorite entry parameters. To estimate track annealing, the temperature history during atmospheric heating at different distances from the crusted surface of the meteorite is obtained by solving heat conduction equation in conjunction with meteorite entry model, and use of the annealing model to evaluate the degree of annealing of tracks. It is shown that the measured values of delta X sub 1 and delta X sub 2 in three of the meteorites studied are consistent with values using preatmospheric mass, entry velocity and entry angle of these meteorites.

Jha, R.↗

A continuous damage model based on stepwise-stress creep rupture tests

A creep damage accumulation model is presented that makes use of the Kachanov damage rate concept with a provision accounting for damage that results from a variable stress history. This is accomplished through the introduction of an additional term in the Kachanov rate equation that is linear in the stress rate. Specification of the material functions and parameters in the model requires two types of constituting a data base: (1) standard constant-stress creep rupture tests, and (2) a sequence of two-step creep rupture tests.

Robinson, D. N.↗

Simulation of ocean SAR images via phase history generation

A method for simulating an ocean synthetic-aperture radar (SAR) image is illustrated for a simple internal wave current pattern. The method calculates both the amplitude image and the radar signal history. The simulation model used consists of six stages. In the first stage, the full wave spectrum in two spatial coordinates is calculated from the wind speed and direction using the action spectral density equation. In the second stage, the pixel size is selected and used as the basis for dividing the spectrum into large and small scale motions. Realizations for the large-scale ocean surface height and velocity are then calculated. In the third stage, the sensor wavelength and geometry are used to calculate the small scale statistics (radar cross section, coherence time, root-mean square (RMS), radial velocity and RMS slope). In the fourth stage, an autoregressive method is used to generate a realization of the surface reflectivity history that is consistent with the radial velocity and the radial velocity variance. In the fifth stage, the signal history is generated by summing the reflectivities at the proper times with the appropriate antenna weighting function for the SAR. As a consequence of this process, speckle is automatically included in the signal. In the final stage, the SAR image can be created by using any of the traditional ways to process the signal history, including variable focusing and multilook processing.

Bennett, John R.↗

TOAD Editor

Transferable Output ASCII Data (TOAD) computer program (LAR-13755), implements format designed to facilitate transfer of data across communication networks and dissimilar host computer systems. Any data file conforming to TOAD format standard called TOAD file. TOAD Editor is interactive software tool for manipulating contents of TOAD files. Commonly used to extract filtered subsets of data for visualization of results of computation. Also offers such user-oriented features as on-line help, clear English error messages, startup file, macroinstructions defined by user, command history, user variables, UNDO features, and full complement of mathematical statistical, and conversion functions. Companion program, TOAD Gateway (LAR-14484), converts data files from variety of other file formats to that of TOAD. TOAD Editor written in FORTRAN 77.

Bingle, Bradford D.↗

Mapping Chaparral in the Santa Monica Mountains Using Multiple Spectral Mixture Models

California chaparral is one of the most important natural vegetation communities in Southern California, representing a significant source of species diversity and, through a high susceptibility to fire, playing a major role in ecosystem dynamics. Due to steep topographic gradients, harsh edaphic conditions and variable fire histories, chaparral typically forms a complex mosaic of different species dominants and age classes, each with unique successional responses to fire and canopy characteristics (e.g. moisture content, biomass, fuel load) that modify fire susceptibility. The high human cost of fire and intimate mixing along the urban interface combine to modify the natural fire regime as well as provide additional impetus for a better understanding of how to predict fire and its management. Management problems have been further magnified by nearly seventy years of fire suppression and drought related die-back over the last few years resulting in a large accumulation of highly combustible fuels. Chaparral communities in the Santa Monica Mountains exemplify many of the management challenges associated with fire and biodiversity. A study was initiated in the Santa Monica Mountains to investigate the use of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) for providing improved maps of chaparral coupled with direct estimates of canopy attributes (e.g. biomass, leaf area, fuel load). The Santa Monica Mountains are an east-west trending range located approximately 75 kilometers north of Los Angeles extending westward into Ventura County. Within the Santa Monica Mountains a diverse number of ecosystems are located, including four distinct types of chaparral, wetlands, riparian habitats, woodlands, and coastal sage scrub. In this study we focus on mapping three types of chaparral, oak woodlands and grasslands. Chaparral mapped included coastal sage scrub, chamise chaparral and mixed chaparral that consisted predominantly of two species of Ceanothus.

Green Robert O.↗

Microfossils from silicified stromatolitic carbonates of the Upper Proterozoic Limestone-Dolomite 'Series', central East Greenland

Silicified flake conglomerates and in situ stratiform stromatolites of the Upper Proterozoic (c. 700-800 Ma) Limestone-Dolomite 'Series', central East Greenland, contain well preserved microfossils. Five stratigraphic horizons within the 1200 m succession contain microbial mat assemblages, providing a broad palaeontological representation of late Proterozoic peritidal mat communities. Comparison of assemblages demonstrates that the taxonomy and diversity of mat builder, dweller, and allochthonous populations all vary considerably within and among horizons. The primary mat builder in most assemblages is Siphonophycus inornatum, a sheath-forming prokaryote of probable but not unequivocally established cyanobacterial affinities. An unusual low diversity unit in Bed 17 is dominated by a different builder, Tenuofilum septatum, while a thin cryptalgal horizon in Bed 18 is built almost exclusively by Siphonophycus kestron. Although variable taphonomic histories contribute to observed assemblage variation, most differences within and among horizons appear to reflect the differential success or failure of individual microbial populations in colonizing different tidal flat microenvironments. Twenty-two taxa are recognized, of which two are described as new: Myxococcoides stragulescens n.sp. and Scissilisphaera gradata n. sp.

NASA Discipline Number 52-30↗

Overview of Global Monitoring of Terrestrial Chlorophyll Fluorescence from Space

Despite the critical importance of photosynthesis for the Earth system, understanding how it is influenced by factors such as climate variability, disturbance history, and water or nutrient availability remains a challenge because of the complex interactions and the lack of GPP measurements at various temporal and spatial scales. Space observations of the sun-induced chlorophyll fluorescence (SIF) electromagnetic signal emitted by plants in the 650-850nm spectral range hold the promise of providing a new view of vegetation photosynthesis on a global basis. Global retrievals of SIF from space have recently been achieved from a number of spaceborne spectrometers originally intended for atmospheric research. Despite not having been designed for land applications, such instruments have turned out to provide the necessary spectral and radiometric sensitivity for SIF retrieval from space. The first global measurements of SIF were achieved in 2011 from spectra acquired by the Japanese GOSAT mission launched in 2009. The retrieval takes advantage of the high spectral resolution provided by GOSATs Fourier Transform Spectrometer (FTS) which allows the evaluation of the in-filling of solar Fraunhofer lines by SIF. Unfortunately, GOSAT only provides a sparse spatial sampling with individual soundings separated by several hundred kilometers. Complementary, the Global Ozone Monitoring Experiment-2 (GOME-2) instruments onboard MetOp-A and MetOp-B enable SIF retrievals since 2007 with a continuous and global spatial coverage. GOME-2 measures in the red and near-infrared (NIR) spectral regions with a spectral resolution of 0.5 nm and a pixel size of up to 40x40 km2. Most recently, another global and spatially continuous data set of SIF retrievals at 740 nm spanning the 2003-2012 time frame has been produced from ENVISATSCIAMACHY. This observational scenario has been completed by the first fluorescence data from the NASA-JPL OCO-2 mission (launched in July 2014) and the upcoming Copernicus' Sentinel 5-Precursor to be launched in early 2016. OCO-2 and TROPOMI offer the possibility of monitoring SIF globally with a 100-fold improvement in spatial and temporal resolution with respect to the current measurements from the GOSAT, GOME-2 and SCIAMACHY missions. In this contribution, we will provide an overview of existing global SIF data sets derived from space-based atmospheric spectrometers and will demonstrate the potential of such data to improve our knowledge of vegetation photosynthesis and gross primary production at the synoptic scale. We will show examples of ongoing research exploiting SIF data for an improved monitoring of photosynthetic activity in different ecosystems, including large crop belts worldwide, the Amazon rainforest and boreal evergreen forests.

vegetation agriculture satellite↗

Global Variations in Regolith Properties on Asteroid Vesta from Dawn's Low-Altitude Mapping Orbit

We investigate the depth, variability, and history of regolith on asteroid Vesta using data from the Dawn spacecraft. High-resolution (15-20 m pixel(sup -1)) Framing Cameraimages are used to assess the presence of morphologic indicators of a shallow regolith,including the presence of blocks in crater ejecta, spur-and-gully-type features in crater walls,and the retention of small (less than 300 m) impact craters. Such features reveal that the broad,regional heterogeneities observed on Vesta in terms of albedo and surface composition extend to the physical properties of the upper approx. 1 km of the surface. Regions of thin regolithare found within the Rheasilvia basin and at equatorial latitudes from approx. 0-90 deg. E and approx.260-360 deg. E. Craters in these areas that appear to excavate material from beneath the regolithhave more diogenitic (Rheasilvia, 090 deg. E) and cumulate eucrite (260-360 deg. E) compositions.A region of especially thick regolith, where depths generally exceed 1 km, is found from approx.100-240 deg. E and corresponds to heavily cratered, low-albedo surface with a basaltic eucritecomposition enriched in carbonaceous chondrite material. The presence of a thick regolithin this area supports the idea that this is an ancient terrain that has accumulated a larger component of exogenic debris. We find evidence for the gardening of crater ejecta towardmore howarditic compositions, consistent with regolith mixing being the dominant form of "weathering" on Vesta.

asteroid↗

Geometric learning for computational mechanics Part II: Graph embedding for interpretable multiscale plasticity

The history-dependent behaviors of classical plasticity models are often driven by internal variables evolved according to phenomenological laws. The difficulty to interpret how these internal variables represent a history of deformation, the lack of direct measurement of these internal variables for calibration and validation, and the weak physical underpinning of those phenomenological laws have long been criticized as barriers to creating realistic models. In this work, geometric machine learning on graph data (e.g. finite element solutions) is used as a means to establish a connection between nonlinear dimensional reduction techniques and plasticity models. Geometric learning-based encoding on graphs allows the embedding of rich time-history data onto a low-dimensional Euclidean space such that the evolution of plastic deformation can be predicted in the embedded feature space. Finally, a corresponding decoder can then convert these low-dimensional internal variables back into a weighted graph such that the dominating topological features of plastic deformation can be observed and analyzed.

42 ENGINEERING↗

The variable polarity plasma arc welding process: Its application to the Space Shuttle external tank

The technical history of the variable polarity plasma arc (VPPA) welding process being introduced as a partial replacement for the gas shielded tungsten arc process in assembly welding of the space shuttle external tank is described. Interim results of the weld strength qualification studies, and plans for further work on the implementation of the VPPA process are included.

Nunes, A. C., Jr.↗

A retrospective review of von Neumann’s analysis of hidden variables in quantum mechanics

This article reviews the history of J. von Neumann’s analysis of hidden variables in quantum mechanics and the subsequent analysis by others. In his book The Mathematical Foundations of Quantum Mechanics , published in 1932, von Neumann performed an analysis of the consequences of introducing hidden parameters (hidden variables) into quantum mechanics. He arrived at two principal conclusions: first, hidden variables cannot be incorporated into the existing theory of quantum mechanics without major modifications, and second, if they did exist, the theory would have already failed in situations where it has been successfully applied. This analysis has been taken as an “incorrect proof” against the existence of hidden variables, possibly due to a mistranslation of the German word prufen . von Neumann’s so-called proof isn’t even wrong as such a proof does not exist, but it is an examination of the limitations imposed by internal consistency of the Hilbert space formulation of the theory. One of the earliest attempts to eliminate uncertainty, by D. Bohm, requires a major modification of quantum mechanics (observables are not represented by Hermitian operators), which supports von Neumann’s first principal conclusion. However, testing the Bohm theory requires constructing a physically impossible initial state. As such, the theory has no experimental consequences, so W. Pauli referred to it as an “uncashable check”. As there are no observable consequences, the Bohm theory is possibly a counterexample to von Neumann’s second conclusion that hidden variables in particular would have already led to a failure of the theory.

density matrix↗

Photometry of compact galaxies.

Photometric histories of the N galaxies 3C 390.3 and PKS 0521-36. Four other compact galaxies, Markarian 9, I Zw 92, 2 Zw 136, and III Zw 77 showed no evidence of variability. The photometric histories were obtained from an exhaustive study of those plates of the Harvard collection taken with large aperture cameras. The images of all galaxies reported were indistinguishable from stars due to the camera f-ratios and low surface brightness of the outlying nebulosities of the galaxies. Standard techniques for the study of variable stars are therefore applicable.

Shen, B. S. P.↗

Variability in equatorial Pacific sea surface topography during the verification phase of the TOPEX/POSEIDON mission

As part of the verification phase of the TOPEX/POSEIDON mission, 10-day gridded fields of altimeter data derived from TOPEX geophysical data records are compared with 10-day gridded fields of dynamic height derived from more than 60 moorings of the Tropical Ocean and Global Atmosphere-Tropical Atmosphere Ocean (TOGA-TAO) array in the equatorial Pacific Ocean. Access to TAO data in real time permits the first 500 days of the TOPEX/POSEIDON mission to be placed in the context of complementary, in-situ measurements of surface winds, sea surface temperatures, and upper ocean thermal structure, as well as the time history of these variables prior to launch. Analysis of the space-time structure in the TOPEX and TAO surface topography data increases sea level variability primarily due to equatorial Kelvin wave activity generated by intense wind bursts west of the date line in association with the 1991-1993 El Nino. Cross correlations between the two data sets are generally greater than 0.7, with root mean square (RMS) differences less than 4 cm. However, for reasons not fully understood, correlations drop to less than 0.5 in certain regions off the equator in the eastern Pacific and RMS differences can be greater than 5 cm north of the equator in the central and eastern Pacific.

Busalacchi, Antonio J.↗

Unsteady Aerodynamic Testing Using the Dynamic Plunge Pitch and Roll Model Mount

A final report on the DyPPiR tests that were run are presented. Essentially it consists of two parts, a description of the data reduction techniques and the results. The data reduction techniques include three methods that were considered: 1) signal processing of wind on - wind off data; 2) using wind on data in conjunction with accelerometer measurements; and 3) using a dynamic model of the sting to predict the sting oscillations and determining the aerodynamic inputs using an optimization process. After trying all three, we ended up using method 1, mainly because of its simplicity and our confidence in its accuracy. The results section consists of time history plots of the input variables (angle of attack, roll angle, and/or plunge position) and the corresponding time histories of the output variables, C(sub L), C(sub D), C(sub m), C(sub l), C(sub m), C(sub n). Also included are some phase plots of one or more of the output variable vs. an input variable. Typically of interest are pitch moment coefficient vs. angle of attack for an oscillatory motion where the hysteresis loops can be observed. These plots are useful to determine the "more interesting" cases. Samples of the data as it appears on the disk are presented at the end of the report. The last maneuver, a rolling pull up, is indicative of the unique capabilities of the DyPPiR, allowing combinations of motions to be exercised at the same time.

Lutze, Frederick H.↗

Understanding the Nature of an Unusual Post-starburst Quasar with Exceptionally Strong Ne v Emission

We present a z = 0.94 quasar, SDSS J004846.45-004611.9, discovered in the Sloan Digital Sky Survey III (SDSS-III) BOSS survey. A visual analysis of this spectrum reveals highly broadened and blueshifted narrow emission lines, in particular, [Ne v] λ3426 and [O III ] λ5007, with outflow velocities of 4000 km s -1 , along with unusually large [Ne v] λ3426/[Ne III ] λ3869 ratios. The gas shows higher ionization at higher outflow velocities, indicating a connection between the powerful outflow and the unusual strength of the high ionization lines. The spectral energy distribution and the i – W3 color of the source reveal that it is likely a core extremely red quasar (ERQ); a candidate population of young active galactic nuclei (AGN) that are violently blowing out gas and dust from their centers. The dominance of host galaxy light in its spectrum and its fortuitous position in the SDSS S82 region allows us to measure its star formation history and investigate variability for the first time in an ERQ. Our analysis indicates that SDSS J004846.45-004611.9 underwent a short-lived starburst phase 400 Myr ago and was subsequently quenched, possibly indicating a time lag between star formation quenching and the onset of AGN activity. We also find that the strong extinction can be uniquely attributed to the AGN and does not persist in the host galaxy, contradicting a scenario where the source has recently transitioned from being a dusty submillimeter galaxy. In our relatively shallow photometric data, the source does not appear to be variable at 0.24–2.4 μm in the rest frame, most likely due to the dominant contribution of host galaxy starlight at these wavelengths.

79 ASTRONOMY AND ASTROPHYSICS↗

Photometry of R Coronae Borealis

Visual and photoelectric observations of R Coronae Borealis are presented, including a number of observations surrounding the 1974 minimum. The recent visual history of the variable is examined and the discrete cloud obscuration model is considered.

Dawson, D. W.↗

Evolution of the Tharsis province of Mars - The importance of heterogeneous lithospheric thickness and volcanic construction

A new model for the origin and evolution of the Tharsis province that emphasizes that the topography of Tharsis may be produced largely by construction, rather than uplift, is proposed. Underlying the model is the premise that the elastic lithosphere of Mars was laterally heterogeneous early in Martian history; such heterogeneity is discernible later in Martian history from the variable tectonic response of the lithosphere to local surface loads. It is contended that the mechanism for the evolution of Tharsis described here led to permanent topographic and gravity highs and a greatly thickened crust in the Tharsis region. An important advantage of the model is that no anomalous dynamical or chemical properties need be sustained in the Martian mantle beneath Tharsis for billions of years. The mantle beneath Tharsis is thus seen as playing a passive rather than an active role in the regional volcanic and tectonic activity, much like the role of the mantle beneath major midocean ridges on earth.

Solomon, S. C.↗