Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gravity data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Implications of new gravity data for Baikal Rift zone structure

Newly available, 2D Bouguer gravity anomaly data from the Baikal Rift zone, Siberia, indicate that this discrete, intracontinental rift system is regionally compensated by an elastic plate about 50 km thick. However, spectral and spatial domain analyses and isostatic anomaly calculations show that simple elastic plate theory does not offer an adequate explanation for compensation in the rift zone, probably because of significant lateral variations in plate strength and the presence of subsurface loads. Our results and other geophysical observations support the interpretation that the Baikal Rift zone is colder than either the East African or Rio Grande rift.

Ruppel, C.↗
NASA NTRS2022

Regional Variations of Mercury's Crustal Density and Porosity From MESSENGER Gravity Data

A new solution of Mercury's gravity field to degree and order 160, named HgM009, is retrieved through a reprocessing of MESSENGER radio science measurements. By combining our latest gravity field with topography data, localized spectral admittance analyses are carried out to investigate Mercury's crustal and lithospheric properties across the northern hemisphere. The measured spectra are compared with admittances predicted by lithospheric flexure models. The localized gravity/topography admittance analyses yield key information on the lateral variations of the bulk density of the upper crust. Elastic and crustal thicknesses are also adjusted in our study, but the local admittance spectra allow us to constrain these parameters only over a few regions. The average bulk density across the observed areas in the northern hemisphere is 2540 ±60 kg m −3 . The crustal porosity is then constrained by using an estimate of the pore-free grain density of surface materials with our measured bulk density. Our estimate of the mean porosity is 14.7 ±1.6 %, which is comparable to, but slightly higher than, the average value measured on the Moon. Larger crustal porosities are observed over heavily cratered regions, suggesting that impact bombardment is the main cause of the crustal porosity.

Mercury's crust↗
NASA NTRS1978

Analysis and geological interpretation of gravity data from GEOS-3 altimeter

A number of detailed gravimetric geoids of portions of the world's oceans from marine gravity measurements were constructed. The geoids were constructed by computing 1 x 1 deg or 10 x 10 deg averages of free-air anomaly data and subtracting these values from currently used satellite derived Earth models. The resulting difference gravity anomalies are then integrated over a sphere using a simplified form of Stoke's equation to obtain a difference geoid. This difference geoid is added to the satellite derived model to obtain a 1 x 1 deg or 10 x 10 deg total gravimetric geoid. The geoid undulations are studied by comparison of the altimeter measurements with the morphology of the ocean floor. Utilizing a combination of altimetry data, gravity and seismic reflection data, geophysical models of the earth can be constructed.

Talwani, M.↗
NASA NTRS1974

Procedures and results related to the direct determination of gravity anomalies from satellite and terrestrial gravity data

The equations needed for the incorporation of gravity anomalies as unknown parameters in an orbit determination program are described. These equations were implemented in the Geodyn computer program which was used to process optical satellite observations. The arc dependent parameter unknowns, 184 unknown 15 deg and coordinates of 7 tracking stations were considered. Up to 39 arcs (5 to 7 days) involving 10 different satellites, were processed. An anomaly solution from the satellite data and a combination solution with 15 deg terrestrial anomalies were made. The limited data samples indicate that the method works. The 15 deg anomalies from various solutions and the potential coefficients implied by the different solutions are reported.

Rapp, R. H.↗
NASA NTRS2008

A Statistical Filtering Approach for Gravity Recovery and Climate Experiment (GRACE) Gravity Data

We describe and analyze a statistical filtering approach for GRACE data that uses a parametrized model for the temporal evolution of the GRACE coefficients. After least-squares adjustment, a statistical test is performed to assess the significance of the estimated parameters. If the test is passed, the parameters are used by the filter in the reconstruction of the field; otherwise they are rejected. The test is performed, and the filter is formed, separately for annual components of the model and the trend. This new approach is distinct from Gaussian smoothing since it uses the data themselves to test for specific components of the time-varying gravity field. The statistical filter appears inherently to remove most of the "stripes" present in the GRACE fields, although destriping the fields prior to filtering seems to help the trend recovery. We demonstrate that the statistical filter produces reasonable maps for the annual components and trend. We furthermore assess the statistical filter for the annual components using ground-based GPS data in South America by assuming that the annual component of the gravity signal is associated only with groundwater storage. The un-destriped, statistically filtered field has a X2 value relative to the GPS data consistent with the best result from smoothing. In the space domain, the statistical filters are qualitatively similar to Gaussian smoothing. Unlike Gaussian smoothing, however, the statistical filter has significant sidelobes, including large negative sidelobes on the north-south axis, potentially revealing information on the errors, and the correlations among the errors, for the GRACE coefficients.

Davis. J. L.↗
NASA NTRS1994

A geopotential model from satellite tracking, altimeter, and surface gravity data: GEM-T3

An improved model of Earth's gravitational field, Goddard Earth Model T-3 (GEM-T3), has been developed from a combination of satellite tracking, satellite altimeter, and surface gravimetric data. GEM-T3 provides a significant improvement in the modeling of the gravity field at half wavelengths of 400 km and longer. This model, complete to degree and order 50, yields more accurate satellite orbits and an improved geoid representation than previous Goddard Earth Models. GEM-T3 uses altimeter data from GEOS 3 (1975-1976), Seasat (1978) and Geosat (1986-1987). Tracking information used in the solution includes more than 1300 arcs of data encompassing 31 different satellites. The recovery of the long-wavelength components of the solution relies mostly on highly precise satellite laser ranging (SLR) data, but also includes Tracking Network (TRANET) Doppler, optical, and satellite-to-satellite tracking acquired between the ATS 6 and GEOS 3 satellites. The main advances over GEM-T2 (beyond the inclusion of altimeter and surface gravity information which is essential for the resolution of the shorter wavelength geoid) are some improved tracking data analysis approaches and additional SLR data. Although the use of altimeter data has greatly enhanced the modeling of the ocean geoid between 65 deg N and 60 deg S latitudes in GEM-T3, the lack of accurate detailed surface gravimetry leaves poor geoid resolution over many continental regions of great tectonic interest (e.g., Himalayas, Andes). Estimates of polar motion, tracking station coordinates, and long-wavelength ocean tidal terms were also made (accounting for 6330 parameters). GEM-T3 has undergone error calibration using a technique based on subset solutions to produce reliable error estimates. The calibration is based on the condition that the expected mean square deviation of a subset gravity solution from the full set values is predicted by the solutions' error covariances. Data weights are iteratively adjusted until this condition for the error calibration is satisfied. In addition, gravity field tests were performed on strong satellite data sets withheld from the solution (thereby ensuring their independence). In these tests, the performance of the subset models on the withheld observations is compared to error projections based on their calibrated error covariances. These results demonstrate that orbit accuracy projections are reliable for new satellites which were not included in GEM-T3.

Lerch, F. J.↗
NASA NTRS2007

GRACE Gravity Data Constrain Ancient Ice Geometries and Continental Dynamics over Laurentia

The free-air gravity trend over Canada, derived from the Gravity Recovery and Climate Experiment (GRACE) satellite mission, robustly isolates the gravity signal associated with glacial isostatic adjustment (GIA) from the longer-time scale mantle convection process. This trend proves that the ancient Laurentian ice complex was composed of two large domes to the west and east of Hudson Bay, in accord with one of two classes of earlier reconstructions. Moreover, GIA models that reconcile the peak rates contribute approximately 25 to approximately 45% to the observed static gravity field, which represents an important boundary condition on the buoyancy of the continental tectosphere.

Tamisiea, M. E.↗
NASA NTRS1985

Geophysical interpretation of Venus gravity data

The investigation of the subsurface mass distribution of Venus through the analysis of the data from Pioneer Venus Orbiter (PVO) is presented. The Doppler tracking data was used to map the gravitational potential, which was compared to the topographic data from the PVO radar (ORAD). In order to obtain an unbiased comparison, the topography obtained from the PVO-ORAD was filtered to introduce distortions which are the same as those of our gravity models. The last major software package that was required in order to determine the spectral admittance Z (lambda) was used. This package solves the forward problem: given the topography and its density, and assuming no compensation, find the resulting spacecraft acceleration along a given nominal trajectory. The filtered topography is obtained by processing these accelerations in the same way (i.e., with the same geophysical inverter) as the Doppler-rate data that we use to estimate the gravity maps.

Reasenberg, R. D.↗
NASA NTRS2005

GRACE Gravity Data Target Possible Mega-impact in North Central Wilkes Land, Antarctica

A prominent positive GRACE satellite-measured free-air gravity anomaly over regionally depressed subglacial topography may identify a mascon centered on (70 deg S, 120 deg E) between the Gamburtsev and Transantarctic Mountains of East Antarctica. Being more than twice the size of the Chicxulub crater, the inferred Wilkes Land impact crater is a strong candidate for a Gondwana source of the greatest extinction of life at the end of the Permian. Its ring structure intersects the coastline and thus may have strongly influenced the Cenozoic rifting of East Antarctica from Australia that resulted in the enigmatic lack of crustal thinning on the conjugate Australian block.

vonFrese, Ralph R. B.↗
NASA NTRS1985

Geophysical Interpretation of Venus Gravity Data

The subsurface distribution of Venus was investigated through the analysis of the data from Pioneer Venus Orbiter (PVO). In particular, the Doppler tracking data were used to map the gravitational potential. These were compared to the topographic data from the PVO radar (ORAD). In order to obtain an unbiased comparison, the topography data obtained from the PVO-ORAD were filtered to introduce distortions which are the same as those of the gravity models. Both the gravity and filtered topography maps are derived by two stage processes with a common second stage. In the first stage, the topography was used to calculate a corresponding spacecraft acceleration under the assumptions that the topography has a uniform given density and no compensation. In the second stage, the acceleration measures found in the first stage were passed through a linear inverter to yield maps of gravity and topography. Because these maps are the result of the same inversion process, they contain the same distortion; a comparison between them is unbiased to first order.

Reasenberg, R. D.↗
NASA NTRS1994

Evidence for Active Hotspots on Venus from Analysis of Magellan Gravity Data

Teh 500 My average crater retension for Venus ahs raised questions about the present-day level of tectonic activity. In this study we examine the relationship between the gravity and topography of four large volcanic swells, Beta, Atla, Bell, and Western Eistla Regiones, for clues about their stage of evolution.

hotspots↗
NASA NTRS2003

Crustal Structure of the Iceland Region from Spectrally Correlated Free-air and Terrain Gravity Data

Seismic refraction studies have provided critical, but spatially restricted constraints on the structure of the Icelandic crust. To obtain a more comprehensive regional view of this tectonically complicated area, we spectrally correlated free-air gravity anomalies against computed gravity effects of the terrain for a crustal thickness model that also conforms to regional seismic and thermal constraints. Our regional crustal thickness estimates suggest thickened crust extends up to 500 km on either side of the Greenland-Scotland Ridge with the Iceland-Faeroe Ridge crust being less extended and on average 3-5 km thinner than the crust of the Greenland-Iceland Ridge. Crustal thickness estimates for Iceland range from 25-35 km in conformity with seismic predictions of a cooler, thicker crust. However, the deepening of our gravity-inferred Moho relative to seismic estimates at the thermal plume and rift zones of Iceland suggests partial melting. The amount of partial melting may range from about 8% beneath the rift zones to perhaps 20% above the plume core where mantle temperatures may be 200-400 C above normal. Beneath Iceland, areally limited regions of partial melting may also be compositionally and mechanically layered

Leftwich, T. E.↗
NASA NTRS2003

Crustal Structure of the Iceland Region from Spectrally Correlated Free-air and Terrain Gravity Data

Seismic refraction studies have provided critical, but spatially restricted constraints on the structure of the Icelandic crust. To obtain a more comprehensive regional view of this tectonically complicated area, we spectrally correlated free-air gravity anomalies against computed gravity effects of the terrain for a crustal thickness model that also conforms to regional seismic and thermal constraints. Our regional crustal thickness estimates suggest thickened crust extends up to 500 km on either side of the Greenland-Scotland Ridge with the Iceland-Faeroe Ridge crust being less extended and on average 3-5 km thinner than the crust of the Greenland-Iceland Ridge. Crustal thickness estimates for Iceland range from 25-35 km in conformity with seismic predictions of a cooler, thicker crust. However, the deepening of our gravity-inferred Moho relative to seismic estimates at the thermal plume and rift zones of Iceland suggests partial melting. The amount of partial melting may range from about 8% beneath the rift zones to perhaps 20% above the plume core where mantle temperatures may be 200-400 C above normal. Beneath Iceland, areally limited regions of partial melting may also be compositionally and mechanically layered and intruded. The mantle plume appears to be centered at (64.6 deg N, 17.4 deg W) near the Vatnajokull Glacier and the central Icelandic neovolcanic zones.

Leftwich, T. E.↗
NASA NTRSDate not supplied

Using Federated Learning to Overcome Data Gravity in Space

Humans intend to take longer missions to outer space. Understanding the impact that space has on human health is paramount to the success of these missions. Controlled experiments with model organisms are run to infer the impact of space conditions on human health, but the data these experiments generate are too large to transfer to Earth for building models. The same is true for space-relevant data generated on Earth. Ideally, these datasets should be combined to improve statistical power and model accuracy without having to transfer data. Federated learning is such a method which trains an algorithm across decentralized computing systems, each of which has their own local copy of training and testing data. In this research, made possible by NASA@Work, the AI for Life in Space group at NASA demonstrates the use of federated learning to train an ensemble of causality inference models on a combination of data residing on the International Space Station (ISS) and in the cloud. Our work leverages CRISP, a causal inference platform developed during the 2020 Frontier Development Lab’s “Astronaut Health Challenge.” We also leverage the OpenFL federated learning library which was collaboratively developed at Intel and UPenn. We used publicly available data from the NASA Ames Life Sciences Data Archive to identify features in ionizing radiation experiments as causal of changes in cardiac blood velocity. This research demonstrates, for the first time, the possibility of running machine learning algorithms on datasets separated by astronomical distances. In this experiment, all the data were generated in terra, half of which were transferred to the ISS and analyzed on the Spaceborne Computer. In the future, our research will leverage federated learning on data generated in situ on the ISS with data generated terrestrially to predict the impact of spaceflight on mammalian female reproductive capacity.

James Casaletto↗
NASA NTRS1974

Structure of the Jovian envelope from Pioneer 10 gravity data

Measurement of Jupiter's zonal harmonics J2 and J4 by the celestial mechanics experiment on Pioneer 10 may be used to obtain a constraint on the structure of the outer envelope of Jupiter, using an inversion technique which is insensitive to the structure of the deep interior for a plausible class of planetary models. The derived structure is consistent with an adiabatic, solar-composition envelope with a starting temperature of 250 plus or minus 40 K at 1 bar pressure.

Anderson, J. D.↗
NASA NTRS1980

Interior structure of Saturn inferred from Pioneer 11 gravity data

The structure of Saturn is studied via a fourth-order theory for rotating planets and equations of state for the envelope which depend parametrically on the helium abundance, on the starting temperature for the adiabat, and on adopted forms of the pressure-density curve in the region of transition from molecular to metallic hydrogen. Models are constrained by the values of J2 and J4 obtained from the Pioneer-Saturn celestial mechanics experiment. Equations of state are tested by computing Jupiter models, which can now be subjected to a more stringent comparison with observed zonal harmonics. It is found that Saturn has a low-density hydrogen-helium envelope with no evidence for enhancement of H2O, CH4, or other abundant compounds. Such compounds are presumably located near the core. The helium mass abundance for Saturn's envelope appears to be in the range of approximately 0.12 to 0.19, but this result is very model-dependent. The helium abundance in the envelope of Jupiter is apparently very similar to that of Saturn.

Hubbard, W. B.↗