Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geostationary observation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Simultaneous energetic particle observations at geostationary orbit and in the upstream solar wind - Evidence for leakage during the magnetospheric compression event of November 1, 1984

The issue of accelertion and transport of particles in the upstream solar wind was investigated using the energetic ion and electron observations obtained simultaneously by three fortuitously positioned geostationary spececraft during a strong magnetospheric compression event of November 1, 1984. This compression event brought the subsolar magnetopause inward of the synchronous orbit. Data obtained indicate that, in the November 1 event, the process of magnetospheric ion escape was a very likely source for energetic particles both in the magnetosheath and the upstream solar wind.

Baker, D. N.↗
NASA NTRSDate not supplied

Geostationary Satellite Observations Over Global Environmental Monitoring Sites

Globally, there are now hundreds of ground-based environmental monitoring stations routinely collecting data on a variety of earth-atmosphere interactions. Such observations are also being augmented with data from orbiting satellites. With the beginning of the EOS-era, the MODIS subset around flux towers has been frequently used for validating ecosystem models developed at flux towers and upscaling the observed flux data to regional scales. However, MODIS on the polar-orbiting satellites can observe target regions only once a day, while the Fluxnet eddy- covariance data are compiled as sub-hourly. Therefore, summarizing the sub-hourly flux data into daily statistics is necessary for the comparison between MODIS and Flux data. The new generation geostationary satellite sensors (GOES-16/17 ABI and Himawari-8/9 AHI) have capabilities similar to MODIS but collect data at 5-15 minute intervals. These high-frequency observations allow us to understand and scale diurnal fluxes. Some studies have already shown the effective utilization of time series of geostationary satellite data for ecosystem modeling. We are producing NEX Level-1G products, which are gridded Top-of-Atmosphere reflectance and brightness temperature data from geostationary satellite sensors. We cut out the NEX Level-1G data using the same file format with the MODIS subset except for the projection. The other data products (e.g., surface reflectance, land surface temperature, vegetation indices, and climate data) will be added upon their availability. Currently included networks are Fluxnet, PhenoCam, and AERONET. The NEX subset data will be provided through NASA NEX data portal.

Geostationary Satellites↗
NASA NTRSDate not supplied

Development of a Global Reference Surface Reflectance and BRDF Datasets from Geostationary Satellite Observations and AERONET Measurements

Surface reflectances and their dependency on illumination-view geometries (i.e., BRDF) are the foundation of many high-level satellite products for land and water monitoring. Yet it is difficult to evaluate the quality of satellite-based surface reflectances with ground-based measurements due to the spatial scale differences. In order to fill the gap, here we develop a reference dataset of surface reflectance and BRDF at the global AERONET sites with data streams from operational geostationary sensors including Himawari 8/9 AHI, GK-2A AMI, and GOES 16/17 ABI. Taking the top-of-atmosphere (TOA) reflectance and the site measured atmospheric aerosol optical depth (AOD) as the main inputs, we apply the GeoNEX-AC algorithm to performance accurate atmospheric correction and derive 10-minute surface reflectance and daily Ross-Thick-Li-Sparse (RTLS) BRDF parameters at AERONET sites where coincident AOD measurements and TOA observations are available from 2016 (for Himawari) or 2018 (for GOES) onwards. The algorithm ensures that the retrieved surface BRDF parameters, along with the site-measured AOD, allow the atmospheric radiative transfer model, SHARM, accurately simulate the observed TOA reflectance at diurnal and longer time scales. They are our best estimates of the surface optical properties and thus can serve as the “reference” to evaluate the performance of operational atmospheric correction algorithms (where AOD is assumed unknown and needs to be retrieved). The reference BRDF also allow us to evaluate the spectral band ratios between the SWIR (e.g., 2200 nm) and the visible (e.g., 650 nm) regions, which are commonly used in operational atmospheric correction algorithms. Finally, we demonstrate that the reference dataset can be used to develop potential data synergies between different GEO satellites as well as GEO-LEO sensors.

Weile Wang↗
DOE OSTI2025

Exploring Causal Relationships and Adjustment Timescales of Aerosol-Cloud Interactions in Geostationary Satellite Observations and CAM6 Using Wavelet Phase Coherence Analysis

We present for the first time within the cloud physics context, the application of wavelet phase coherence analysis to disentangle counteracting physical processes associated with the lead-lag phase difference between cloud-proxy liquid water path (LWP) and aerosol-proxy cloud droplet number concentration ( N d ) in an Eulerian framework using satellite-based observations and climate model outputs. This approach allows us to identify the causality and dominant adjustment timescales governing the correlation between LWP and N d . Satellite observations indicate a more prevalent positive correlation between daytime LWP and N d regardless of whether LWP leads or lags N d . The positive cloud water response, associated with precipitation processes, typically occurs within 1 hr, while the negative response resulting from entrainment drying, usually takes 2–4 hr. CAM6 displays excessively rapid negative responses along with overly strong negative cloud water response and insufficient positive response, leading to a more negative correlation between LWP and N d compared to observations.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

Earth observation from geostationary orbit

The paper describes a number of satellite-borne infrared spin-scan sensors and discusses the operational requirements for which they were designed. The sensors considered are the spin scan cloud cameras of ATS 1 and 3, the SMS/GOES visible-infrared spin-scan radiometer, and the VISSR atmospheric sounder.

Hummer, R. F.↗
NASA NTRS1985

Sea surface temperature - Observations from geostationary satellites

Multispectral image data acquired from the VISSR atmospheric sounder (VAS) on the geostationary GOES satellites were used to estimate sea surface temperatures (SST). A procedure was developed to screen VAS visible and infrared data for cloud-free regions for estimation of SST from the clear infrared radiances. A data set of matches between the VAS radiances and high quality buoy estimates of SST was produced. A linear regression analysis of these matches was performed to generate an empirical algorithm relating the VAS window channel brightness temperatures to the estimates of SST recorded by NOAA fixed environment buoys. Daily maps of SST during Hurricanes Alicia (1983) and Debbie (1982) demonstrated the ability of VAS to monitor air-sea interactions at high temporal and spatial scales.

Bates, J. J.↗
NASA NTRS2001

The Future of Satellite-based Lightning Detection

The future of satellite-based optical lightning detection, beyond the end of the current TRMM mission, is discussed. Opportunities for new low-earth orbit missions are reviewed. The potential for geostationary observations is significant; such observations provide order-of-magnitude gains in sampling and data efficiency over existing satellite convective observations. The feasibility and performance (resolution, sensitivity) of geostationary measurements using current technology is discussed. In addition to direct and continuous hemispheric observation of lighting, geostationary measurements have the potential (through data assimilation) to dramatically improve short and medium range forecasts, offering benefits to prediction of NOx productions and/or vertical transport.

Bocippio, Dennis J.↗
NASA NTRSDate not supplied

Using the Diurnal Variability in GeoNEX TOA Reflectances for Earth Monitoring

Observations from the third-generation geostationary satellite instruments (GOES 16/17 ABI, Himawari 8/9 AHI, and etc.) have spatial resolution and spectral band configurations comparable to flagship LEO sensors (e.g., MODIS/VIIRS). More importantly, these data are acquired at very high temporal resolution, faithfully recording the variations of the full disk of Earth at every 5-10 minutes. They thus provide unique information about Earth’s atmosphere and surface. In order to explore the unique information content of geostationary data, this study systematically analyzes the diurnal variability in the GeoNEX L1G TOA reflectance products and compares them to simulated results by state-of-the-art radiative transfer codes. Our results show that • The smoothness of the TOA reflectance diurnal cycle provides a convenient and reliable way to identify stable atmospheric conditions and filter out passing clouds/shadows. • The diurnal variability of the blue band (0.47µm) reflectance is regulated mainly by atmospheric optical conditions over a majority of land cover types. As such, the diurnal variability of the blue band data allows us to retrieve AOD without invoking the use of spectral band ratios (SRC) as in previous algorithms. • In comparison, the diurnal variability of the short-wave infrared band (2.2µm) BRFs is mainly regulated by surface reflectance and the sun-target-satellite geometry. This information allows us to test and, if suitable, retrieve surface BRDF parameters. • Spectral band ratios, especially those between the 2.2µm and 0.47µm bands, are not constant but vary by locations and sun-target-satellite geometries. Our analysis clearly demonstrates that the information provided in high-frequent geostationary observations is unique and complementary to LEO sensors. Therefore, a synergy of GEO and LEO (and other) sensors has the great potential to improve existing remote sensing models and algorithms for better Earth monitoring.

Diurnal Variability↗
NASA NTRS1978

Geomagnetic pulsations observed simultaneously on three geostationary satellites

Simultaneous observations of magnetic pulsations have been made by three geostationary satellites carrying similar magnetometers and acting as an azimuthal array. Autospectral and cross-spectral analysis yields coherence and phase differences between the pulsations at the satellite positions. The majority of the data fit the Kelvin-Helmholtz generation mechanism. The azimuthal wave number changes sign near noon and corresponds to propagation away from noon. Usually, the wave number is less than 10 deg per degree of longitude. Later in the afternoon, however, strong pulsations are observed with low coherence, implying large wave numbers. This suggests an instability driven by a gradient in the intensity of energetic protons, which may be expected at this local time. The data also suggest that some of the observed phase difference between the azimuthal components is due to small separations in magnetic shell, whereas this is not the case for the radial components. This implies a localized field-line resonance.

Hughes, W. J.↗
NASA NTRS1995

Implementation of a state of the art automated system for the production of cloud/water vapor motion winds from geostationary satellites

The research objectives in this proposal were part of a continuing program at UW-CIMSS to develop and refine an automated geostationary satellite winds processing system which can be utilized in both research and operational environments. The majority of the originally proposed tasks were successfully accomplished, and in some cases the progress exceeded the original goals. Much of the research and development supported by this grant resulted in upgrades and modifications to the existing automated satellite winds tracking algorithm. These modifications were put to the test through case study demonstrations and numerical model impact studies. After being successfully demonstrated, the modifications and upgrades were implemented into the NESDIS algorithms in Washington DC, and have become part of the operational support. A major focus of the research supported under this grant attended to the continued development of water vapor tracked winds from geostationary observations. The fully automated UW-CIMSS tracking algorithm has been tuned to provide complete upper-tropospheric coverage from this data source, with data set quality close to that of operational cloud motion winds. Multispectral water vapor observations were collected and processed from several different geostationary satellites. The tracking and quality control algorithms were tuned and refined based on ground-truth comparisons and case studies involving impact on numerical model analyses and forecasts. The results have shown the water vapor motion winds are of good quality, complement the cloud motion wind data, and can have a positive impact in NWP on many meteorological scales.

Velden, Christopher↗
NASA NTRS2002

Forecasting Coronal Mass Ejections from Vector Magnetograms

In a 17 vector magnetogram study of 12 bipolar active regions (Falconer, Moore, & Gary, 2002, ApJ in press), we correlated four quantitative global magnetic measures with the Coronal Mass Ejections (CME) productivity of the active region. The global measures included a measure of active region size, the total magnetic flux phi and three measures of an active region global nonpotentiality 1) the net current (I (sub N)), 2) the length of the strong-shear, strong-field main neutral line (L(sub SS)) and 3) and the normalized twist (alpha = muIN/PHI). The CME productivity was determined from YOHKOH/SXT observations, Geostationary Operational Environmental Satellite (GOES), and when possible Solar and Heliospheric Observatory/Large Angle and Spectrometric Coronagraph Experiment (SOHO/LASCO) observations within 12 days of the day of the magnetogram. We found that the three measures of global nonpotentiality (I(sub N), L(sub SS), alpha) were all well correlated (greater than 99% confidence level) with an active region's CME productivity. The sample size was to small to confirm if there was a statistical significant correlation of the globally nonscientist measures with future CME activity (i.e. from the date of the magnetogram forward). We are doubling our sample, and will report on the statistical significance of global nonpotentiality as a predictor of future CME productivity. The new active regions are all from the first year of the upgraded MSFC vector magnetograms. This work, is funded by NSF through the Space Weather Program, by NASA through the Living with the Star, Targeted Research and Technology, and by NASA Solar Physics Supporting Research and Technology Program. The upgrade to the MSFC vector magnetograph was supported by the High Energy Solar Spectroscopic Imager (HESSI) mission.

Falconer, D. A.↗
NASA NTRS2013

SPoRT Participation in the GOES-R and JPSS Proving Grounds

For the last several years, the NASA Short-term Prediction Research and Transition (SPoRT) project at has been working with the various algorithm working groups and science teams to demonstrate the utility of future operational sensors for GOES-R and the suite of instruments for the JPSS observing platforms. For GOES-R, imagery and products have been developed from polar-orbiting sensors such as MODIS and geostationary observations from SEVIRI, simulated imagery, enhanced products derived from existing GOES satellites, and data from ground-based observing systems to generate pseudo or proxy products for the ABI and GLM instruments. The suite of products include GOES-POES basic and RGB hybrid imagery, total lightning flash products, quantitative precipitation estimates, and convective initiation products. SPoRT is using imagery and products from VIIRS, CrIS, ATMS, and OMPS to show the utility of data and products from their operational counterparts on JPSS. The products include VIIRS imagery in swath form, the GOES-POES hybrid, a suite of RGB products including the air mass RGB using water vapor and ozone channels from CrIS, and several DNB products. Over a dozen SPoRT collaborative WFOs and several National Centers are involved in an intensive evaluation of the operational utility of these products.

Jedlovec, Gary↗
NASA NTRS1995

A versatile system for processing geostationary satellite data with run-time visualization capability

To better predict global climate change, scientists are developing climate models that require interdisciplinary and collaborative efforts in their building. We are currently involved in several such projects but will briefly discuss activities in support of two such complementary projects: the Atmospheric Radiation Measurement (ARM) program of the Department of Energy and Sequoia 2000, a joint venture of the University of California, the private sector, and government agencies. Our contribution to the ARM program is to investigate the role of clouds on the top of the atmosphere and on surface radiance fields through the data analysis of surface and satellite observations and complex modeling of the interaction of radiation with clouds. One of our first ARM research activities involves the computation of the broadband shortwave surface irradiance from satellite observations. Geostationary satellite images centered over the first ARM observation site are received hourly over the Internet network and processed in real time to compute hourly and daily composite shortwave irradiance fields. The images and the results are transferred via a high-speed network to the Sequoia 2000 storage facility in Berkeley, where they are archived These satellite-derived results are compared with the surface observations to evaluate the accuracy of the satellite estimate and the spatial representation of the surface observations. In developing the software involved in calculating the surface shortwave irradiance, we have produced an environment whereby we can easily modify and monitor the data processing as required. Through the principles of modular programming, we have developed software that is easily modified as new algorithms for computation are developed or input data availability changes. In addition, the software was designed so that it could be run from an interactive, icon-driven, graphical interface, TCL-TK, developed by Sequoia 2000 participants. In this way, the data flow can be interactively assessed and altered as needed. In this environment, the intermediate data processing 'images' can be viewed, enabling the investigator to easily monitor the various data processing steps as they progress. Additionally, this environment allows the rapid testing of new processing modules and allows their effects to be visually compared with previous results.

Landsfeld, M.↗