Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functionalized Ni catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Design and Synthesis of PtPdNiCoMn High‐Entropy Alloy Electrocatalyst for Enhanced Alkaline Hydrogen Evolution Reaction: A Theoretically Supported Predictive Design Approach

Electrocatalytic hydrogen generation requires a multifunctional electrocatalyst with abundant active sites to drive multielectron transfer reactions. High entropy alloys (HEA) are five or more-elements with high configurational entropy are considered unique materials for next-generation electrocatalysts. Here, in this work, based on new screening guidelines for catalyst selections that combine density-functional theory calculated Gibbs formation-enthalpy with bond length and electronegativity variance, a novel HEA electrocatalyst consisting of five elements, namely, Pt, Pd, Ni, Co, and Mn has been designed. By simple room temperature electrodeposition, the designed catalyst is prepared and its hydrogen evolution reaction (HER) is explored and validated through experimental and theoretical approaches. The HEA demonstrated a superior HER activity with an overpotential of 22.6 mV at -10 mA cm -2 which outperforms Pt/C commercial catalyst. No evident degradation of the material is detected even after 100 hours of continuous operation under high current density. Moreover, the HEA has shown exceptional performance in harsh electrolyte conditions such as in simulated seawater and actual seawater. Remarkably, the density-functional theory calculated Gibbs formation-enthalpy is small (≈0 eV) compared to Pt/C placing the new HEA near the apex of Trasatti's model of Volcano plot, which is also suggestive of superior HER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Mesoporous silica is a versatile material for energy, environmental, and medical applications. In this work, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 /g -1 . We show its superior performance in water purification, drug carrier, and thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell supported nanocatalysts by in situ decorating active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97% CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming MCM-41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to flexible catalysts design for many reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Abstract Mesoporous silica is a versatile material for energy, environmental, and medical applications. Here, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 g −1 . We show its superior performance in water purification, as a drug carrier, and in thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell‐supported nanocatalysts by in situ decoration with active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97 % CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming an MCM‐41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to design and produce flexible catalysts for many reactions.

Liu, Shuo↗
DOE OSTI2025

Highly dense atomic Fe–Ni dual metal sites for efficient CO 2 to CO electrolyzers at industrial current densities

Carbon-supported, atomically dispersed, nitrogen-coordinated metal sites (e.g., Fe and Ni) are arguably the most promising catalysts for the electrochemical reduction of CO 2 to CO due to their unique catalytic properties and the use of earth-abundant elements. However, conventional single metal sites are constrained by their structural simplicity, causing either too weak or too strong absorption/desorption of multiple critical intermediates (e.g., *COOH and *CO). Current catalysts also suffer from ultra-low loadings (<1.0 wt%) of atomic metal active sites in catalysts, leading to inadequate performance for CO 2 -to-CO conversion. Here, we develop dual Ni/Fe metal site catalysts with significantly increased atomically dispersed metal loadings (up to 4.8 wt%). A gas-phase chemical vapor deposition (CVD) approach to introducing single Ni sites was integrated with Fe 2 O 3 /ZIF-8 precursors, followed by an optimal thermal activation. The optimized CVD-Ni/Fe–N–C catalyst exhibited remarkable electrocatalytic performance for the CO 2 reduction to CO in a continuous membrane-electrode-assembly electrolyzer, achieving a maximum CO faradaic efficiency (FE CO ) of 96% at a current density of 700 mA cm −2 in a near-neutral electrolyte. Furthermore, a desirable but challenging acidic flow-cell electrolyzer was designed using this dual metal site catalyst to improve CO 2 utilization, accomplishing a FE CO of up to 95% at a CO partial current density close to 600 mA cm −2 . Density functional theory (DFT) calculations suggest a synergetic effect between Fe–Ni pairs facilitating *COOH intermediate formation and *CO desorption simultaneously during CO 2 to CO conversion. This is key to breaking the linear scaling relationship of conventional single-metal site catalysts during the CO 2 reduction reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Surface oxygenation induced strong interaction between Pd catalyst and functional support for zinc–air batteries

Employing the strong metal-support interaction (SMSI) effect for promoting the catalyst's activity toward the oxygen reduction reaction (ORR) is promising due to the electronic structure optimization and high utilization efficiency of platinum group metal (PGM) catalysts. Metal oxides as alternative supports for PGMs facilitate intrinsic activity and improve durability as compared to conventional carbon supports. However, the restricted mass and electron transfer at the metal/support interface need to be addressed. Herein, to strengthen the interaction at the metal/support interfaces and improve the utilization efficiency of PGM, an ultralow loading of Pd was embedded in a surface-oxygenated PdNiMnO porous film. The Mn-doping was designed to promote surface oxygenation using a facile anodization process that created sufficiently exposed interfaces between Pd and the support, strengthening the SMSI effects at the Pd/oxygenated support interface for enhancing ORR performance. Furthermore, the Ni-containing oxygenated catalyst served as both the active component for the oxygen evolution reaction (OER) and the functional support for stabilizing Pd, making PdNiMnO a bifunctional catalyst for zinc–air flow batteries (ZAFB). As a proof-of-concept, the ZAFB (PdNiMnO) shows a maximal power density of 211.6 mW cm –2 and outstanding cycling stability for over 2000 h with a minimal voltage gap of 0.69 V at a current density of 10 mA cm –2 , superior to the state-of-the-art catalysts.

25 ENERGY STORAGE↗
DOE OSTI2022

Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Iridium-based electrocatalysts remain the only practical anode catalysts for proton exchange membrane (PEM) water electrolysis, due to their excellent stability under acidic oxygen evolution reaction (OER), but are greatly limited by their high cost and low reserves. Here, in this study, we report a nickel-stabilized, ruthenium dioxide (Ni-RuO 2 ) catalyst, a promising alternative to iridium, with high activity and durability in acidic OER for PEM water electrolysis. While pristine RuO 2 showed poor acidic OER stability and degraded within a short period of continuous operation, the incorporation of Ni greatly stabilized the RuO 2 lattice and extended its durability by more than one order of magnitude. When applied to the anode of a PEM water electrolyser, our Ni-RuO 2 catalyst demonstrated >1,000 h stability under a water-splitting current of 200 mA cm -2 , suggesting potential for practical applications. Density functional theory studies, coupled with operando differential electrochemical mass spectroscopy analysis, confirmed the adsorbate-evolving mechanism on Ni-RuO 2 , as well as the critical role of Ni dopants in stabilization of surface Ru and subsurface oxygen for improved OER durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Catalytic decomposition of methane into hydrogen and high-value carbons: combined experimental and DFT computational study

Thermocatalytic decomposition (TCD) of methane can produce hydrogen and valuable nanocarbon co-products with low to near-zero CO2 emission. In this study, a series of Pd promoted Ni catalysts, prepared with various Ni/Pd ratios on a CNT support, were evaluated for methane TCD performance. Characterization and calculations using density functional theory (DFT) were carried out to elucidate the activity–structure relationship and growth mechanism of carbon nanomaterials. It was found that the methane conversion and stability of the catalysts were highly dependent on the Ni/Pd ratio and reaction temperature. DFT calculations revealed that the diffusion of carbon in the metal sublayer required for CNT growth was more favorable in the Ni–Pd alloy lattice suggesting that the buildup of carbon in the metal alloy sublayer facilitated the formation of CNTs and CNFs. A cyclic reaction–regeneration process for self-sustained TCD was experimentally demonstrated. In each cycle, a portion of the separated CNT product was used to re-synthesize the Ni–Pd/CNT catalyst for use in the next reaction cycle. After five cycles of operation, the CH4 conversion, morphology and crystallinity of the carbon product remained unchanged.

Wang, I-Wen↗
DOE OSTI2020

Enhanced and stabilized hydrogen production from methanol by ultrasmall Ni nanoclusters immobilized on defect-rich h-BN nanosheets

Employing liquid organic hydrogen carriers (LOHCs) to transport hydrogen to where it can be utilized relies on methods of efficient chemical dehydrogenation to access this fuel. Therefore, developing effective strategies to optimize the catalytic performance of cheap transition metal-based catalysts in terms of activity and stability for dehydrogenation of LOHCs is a critical challenge. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.5 nm) deposited on defect-rich boron nitride (BN) nanosheet (Ni/BN) catalysts with higher methanol dehydrogenation activity and selectivity, and greater stability than that of some other transition-metal based catalysts. The interface of the two-dimensional (2D) BN with the metal nanoparticles plays a strong role both in guiding the nucleation and growth of the catalytically active ultrasmall Ni nanoclusters, and further in stabilizing these nanoscale Ni catalysts against poisoning by interactions with the BN substrate. We provide detailed spectroscopy characterizations and density functional theory (DFT) calculations to reveal the origin of the high productivity, high selectivity, and high durability exhibited with the Ni/BN nanocatalyst and elucidate its correlation with nanocluster size and support–nanocluster interactions. This study provides insight into the role that the support material can have both regarding the size control of nanoclusters through immobilization during the nanocluster formation and also during the active catalytic process; this twofold set of insights is significant in advancing the understanding the bottom-up design of high-performance, durable catalytic systems for various catalysis needs.

08 HYDROGEN↗
DOE OSTI2022

Tunable metal hydroxide–organic frameworks for catalysing oxygen evolution

The oxygen evolution reaction is central to making chemicals and energy carriers using electrons. Combining the great tunability of enzymatic systems with known oxide-based catalysts can create breakthrough opportunities to achieve both high activity and stability. Here we report a series of metal hydroxide–organic frameworks (MHOFs) synthesized by transforming layered hydroxides into two-dimensional sheets crosslinked using aromatic carboxylate linkers. MHOFs act as a tunable catalytic platform for the oxygen evolution reaction, where the π–π interactions between adjacent stacked linkers dictate stability, while the nature of transition metals in the hydroxides modulates catalytic activity. Substituting Ni-based MHOFs with acidic cations or electron-withdrawing linkers enhances oxygen evolution reaction activity by over three orders of magnitude per metal site, with Fe substitution achieving a mass activity of 80A $g^{-1}_{catalyst}$ 1 at 0.3 V overpotential for 20 h. Density functional theory calculations correlate the enhanced oxygen evolution reaction activity with the MHOF-based modulation of Ni redox and the optimized binding of oxygenated intermediates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthetic and Mechanistic Implications of Chlorine Photoelimination in Nickel/Photoredox C(sp 3 )–H Cross-Coupling

In recent years, the development of light-driven reactions has contributed numerous advances in synthetic organic chemistry. A particularly active research area combines photoredox catalysis with nickel catalysis to accomplish otherwise inaccessible cross-coupling reactions. In these reactions, the photoredox catalyst absorbs light to generate an electronically excited charge-transfer state that can engage in electron or energy transfer with a substrate and the nickel catalyst. Our group questioned whether photoinduced activation of the nickel catalyst itself could also contribute new approaches to cross-coupling. Over the past 5 years, we have sought to advance this hypothesis for the development of a suite of mild and site-selective C(sp 3 )–H cross-coupling reactions with chloride-containing coupling partners via photoelimination of a Ni–Cl bond. On the basis of a report from the Nocera laboratory, we reasoned that photolysis of a Ni(III) aryl chloride species, generated by single-electron oxidation of a typical Ni(II) intermediate in cross-coupling, might allow for the catalytic generation of chlorine atoms. Combining this with the ability of Ni(II) to accept alkyl radicals, we hypothesized that photocatalytically generated chlorine atoms could mediate hydrogen atom transfer (HAT) with C(sp 3 )–H bonds to generate a substrate-derived alkyl radical that is captured by the Ni center in cross-coupling. A photoredox catalyst was envisioned to promote the necessary single-electron oxidation and reduction of the Ni catalyst to facilitate an overall redox-neutral process. Overall, this strategy would offer a visible-light-driven mechanism for chlorine radical formation enabled by the sequential capture of two photons. As an initial demonstration, we developed a Ni/photoredox-catalyzed α-oxy C(sp 3 )–H arylation of cyclic and acyclic ethers. This method was extended to a mild formylation of abundant and complex aryl chlorides through selective 2-functionalization of 1,3-dioxolane. Seeking to develop a suite of reactions that introduce carbon at all different oxidation states, we explored C(sp 3 )–H cross-coupling with trimethyl orthoformate, a common laboratory solvent. We found that trimethyl orthoformate serves as a source of methyl radical for a methylation reaction via β-scission from a tertiary radical generated upon chlorine-mediated HAT. Since chlorine radical is capable of abstracting unactivated C(sp 3 )–H bonds, our efforts have also been directed at cross-coupling with a range of feedstock chemicals, such as alkanes and toluenes, along with late-stage intermediates, using chloroformates as coupling partners. Overall, this platform enables access to valuable synthetic transformations with (hetero)aryl chlorides, which despite being the most ubiquitous and inexpensive aryl halide coupling partners, are rarely reactive in Ni/photoredox catalysis. Little is known about the photophysics and photochemistry of organometallic Ni complexes relevant to cross-coupling. We have conducted mechanistic investigations, including computational, spectroscopic, emission quenching, and stoichiometric oxidation studies, of Ni(II) aryl halide complexes common to Ni/photoredox reactions. These studies indicate that chlorine radical generation from excited Ni(III) is operative in the described C(sp 3 )–H functionalization methods. More generally, the studies illustrate that the photochemistry of cross-coupling catalysts cannot be ignored in metallaphotoredox reactions. We anticipate that further mechanistic understanding should facilitate catalyst design and lead to the development of new synthetic methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modulating Electronic Structure of Atomically Dispersed Nickel Sites through Boron and Nitrogen Dual Coordination Boosts Oxygen Reduction

Abstract Atomically dispersed 3D transitional metal active sites with nitrogen coordination anchored on carbon support have emerged as a kind of promising electrocatalyst toward oxygen reduction reaction (ORR) in the field of fuel cells and metal–air cells. However, it is still a challenge to accurately modulate the coordination structure of single‐atom metal sites, especially first‐shell coordination, as well as identify the relationship between the geometric/electronic structure and ORR performance. Herein, a carbon‐supported single‐atom nickel catalyst is fabricated with boron and nitrogen dual coordination (denoted as Ni‐B/N‐C). The hard X‐ray absorption spectrum result reveals that atomically dispersed Ni active sites are coordinated with one B atom and three N atoms in the first shell (denoted as Ni‐B 1 N 3 ). The Ni‐B/N‐C catalyst exhibits a half‐wave potential ( E 1/2 ) of 0.87 V versus RHE, along with a distinguished long‐term durability in alkaline media, which is superior to commercial Pt/C. Density functional theory calculations indicate that the Ni‐B 1 N 3 active sites are more favorable for the adsorption of ORR intermediates relative to Ni‐N 4 , leading to the reduction of thermodynamic barrier and the acceleration of reaction kinetics, which accounts for the increased intrinsic activity.

Chemistry↗
DOE OSTI2022

Evaluating the effect of ionomer chemical composition in silver-ionomer catalyst inks toward the oxygen evolution reaction by half-cell measurements and water electrolysis

The effect of anion exchange ionomer (AEI) chemistry on the kinetics of the oxygen evolution reaction (OER) was systematically studied in both half-cell and single-cell electrolysis experiments. OER was studied in 1 M K 2 CO 3 at 50°C using an array of ionomer-silver catalyst inks deposited on Ni foam. Different ionomer modifications were investigated to optimize the OER performance. The AEI used in this work features a block copolymer backbone of polychloromethylstyrene-b-polycyclooctene-b-polychloromethylstyrene which was functionalized with either benzyltrimethylammonium (TMA) or benzylmethylpiperidinium (MPRD) quaternary ammonium cations. Here, using an MPRD quaternary ammonium cation shifted the rate determining step at high overpotentials, ultimately providing enhanced performance. Increasing the catalyst ink dilution was also found to substantially improve mass activity and catalyst utilization (increase from 35 to 88 A g –1 Ag), likely by reducing the ionomer thickness and decreasing transport resistances. In the final ionomer modification, the Ni foam substrate was leveraged to partially hydrogenate the polycyclooctene midblock to be polyethylene-like at the Ni interface. A significant increase in the electrochemical surface area (Cdl increased from 8.8 to 20.8 mF cm –2 ) and performance (by 47 mA cm –2 or 29 A g –1 Ag) was observed with the incorporation of polyethylene. Kinetic results from half-cell experiments were validated via single-cell anion exchange membrane electrolysis experiments, where the optimized electrode displayed enhanced performance in both 1 M K 2 CO 3 and DI H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stability of Pt Skin Intermetallic Core Catalysts and Adsorption Properties for the Oxygen Reduction Reaction

Density functional theory calculations were used to determine the stability of metal slabs consisting of a Pt surface monolayer and intermetallic supporting layers made from combinations of six transition metal elements (Pt, Fe, Co, Ni, Cu, and Ag), as a model system for Pt skin intermetallic core nanoparticle catalysts. The stability of the slabs is largely determined by strain at the interface of the Pt skin and the subsurface intermetallic, which was described by a lattice matching parameter (r). The surface charge on the Pt skin was found to be correlated with the average electronegativity (EN) of the intermetallic core, so this average EN was used as a descriptor for how the electronic coupling (or ligand effect) affects adsorption energies. A total of 46 slabs were investigated in terms of their stability, from which 10 stable slabs were selected for further studies of adsorbate binding (OOH*, O*, and OH*) that are intermediates in the oxygen reduction reaction (ORR). The correlation between all three adsorption energies and descriptors r and EN was found. Using a linear fit between our descriptors and the calculated adsorption energies, the overpotential for the ORR was obtained as a function of r and EN, from which a volcano plot was produced. The volcano peak was found at r = 0.96 or at EN = 2.025. Interestingly, neither r nor EN was a sufficient single reactivity descriptor as the data points were well off the general trend in both linear fits; this implies that both the strain effect and the ligand effect influence the adsorption energies, although they are partly correlated. The (r, EN) target peak parameters were used to screen over 241 intermetallic combinations of transition metal elements as active ORR activity. In conclusion, this analysis identified 11 intermetallic compounds which can support a Pt skin to have a high predicted ORR activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Metal–Organic Framework as a Dual Support for Organic Photosensitizers and Single-Atom Catalysts

Metal–organic framework (MOF)-supported single-atom catalysts (SACs) possess integrated unique capabilities of both MOF and SACs, which represent a promising class of catalysts for photocatalytic applications. Herein, we report the incorporation of nickel (Ni) SACs onto its zirconium node and the functionalization of the organic linker of the zirconium MOF with perylene tetracarboxylic dianhydride (PDA), resulting in the formation of a hybrid MOF (denoted as Ni-PiU) with significantly enhanced light absorption ability in the visible region. Using the combination of time-resolved emission and X-ray absorption spectroscopy, we show that efficient charge separation occurs by electron transfer from incorporated PDA to Ni SACs with super slow charge recombination dynamics. As a result of these important photophysical properties, Ni-PiU MOF exhibits excellent photocatalytic activity and durability for the hydrogen evolution reaction. Finally, this work demonstrates the unique ability of MOFs as a dual platform to incorporate both SACs and a light absorption unit into their framework, providing a promising strategy for rational design of next-generation photocatalytic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Experimental trends and theoretical descriptors for electrochemical reduction of carbon dioxide to formate over Sn-based bimetallic catalysts

The electrochemical carbon dioxide reduction reaction (CO 2 RR) using renewable energy sources is a promising solution for mitigating CO 2 emissions. In particular, CO 2 RR to formate represents a commercially profitable target. However, a comprehensive understanding of the catalytic mechanisms of Sn-based catalysts under reaction conditions, including the real-time structural evolution of catalysts and the role of all key reaction intermediates in influencing the CO 2 RR selectivity, is still lacking. The current study reports a framework to study the selectivity preference of Sn-based bimetallic catalysts using a combination of electrochemical measurements, in situ characterization, and density functional theory (DFT) calculations. The addition of a second metal (Co, Ni, Ag, Zn, Ga, Bi) was found to play a vital role in affecting the CO 2 RR performance. In situ X-ray absorption near edge structure (XANES) measurements revealed a dynamic evolution in the Sn valence state induced by different secondary metals. A multidimensional descriptor involving all the key reaction intermediates was developed to assess formate selectivity using a 2-dimensional volcano plot. Finally, this research offers an effective framework for understanding CO 2 RR catalytic selectivity by considering both the real-time structural evolution of catalysts and all the key intermediates involved.

58 GEOSCIENCES↗
DOE OSTI2024

Theoretical Investigation of the Hydrogenation of Cyclohexene Catalyzed by Supported Single-Atom Sites on Redox Noninnocent LiMn 2 O 4 and Li 2 Mn 2 O 4 Surfaces

Here, the tuning of catalyst activity via stereoelectronic modulation of the active-site structure remains a grand challenge in heterogeneous catalysis. In homogeneous catalysis, the redox noninnocent ligands can be introduced to organometallic fragments to donate electrons to the metal center and fine-tune the catalytic activity. Analogously, lithium-ion battery materials, such as lithium manganese oxide (LMO), lithium titanium oxides (LTO), etc., can serve as redox noninnocent catalyst support to modulate the electronic structures of the active site via lithiation, hence tuning the catalytic activity of supported active sites. Experimentally, the Ni single-atom site was supported on LiMn 2 O 4 via oxidative grafting and exhibited no catalytic activity toward the hydrogenation of cyclohexene. After introducing additional Li into the catalyst support forming Li 2 Mn 2 O 4 , the Ni single-atom site becomes active, with the catalytic rates increasing as a function of the lithiation for Li/Mn ratios >0.9. In this paper, density functional theory (DFT) calculations are performed to study the Ni site structure via X-ray absorption near edge structure (XANES) simulations and investigate the electronic properties of Ni single-atom site before and after the addition of intercalated lithium in the LMO spinel structure. Furthermore, the study of the reaction mechanism is also carried out to understand the thermodynamically and kinetically favored pathways. XANES simulation suggests that the Ni single-atom site is likely to stay in the Li channel of the spinel support structure and form an octahedral structure. After Li intercalation, the Ni site becomes less positively charged, indicating the partial reduction of the Ni site. The simulated reaction energy profile over the LiMn 2 O 4 support exhibits high-energy barriers (1.07 eV) for the hydrogenation of cyclohexene; however, the Li 2 Mn 2 O 4 support is able to better stabilize low-coordinated ion sites and improve ion mobility, leading to lower overall energy barriers (0.64 eV). The reduced and low-coordinated ion site, thus, can better stabilize the reaction intermediates and promote hydrogenation reaction. Similarly, other transition metal ions (Fe, Co, and Cu) are also considered over the LiMn 2 O 4 and Li 2 Mn 2 O 4 catalyst supports for hydrogenation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single-Atom Pt Boosting Electrochemical Nonenzymatic Glucose Sensing on Ni(OH) 2 /N-Doped Graphene

Conventional nanomaterials in electrochemical non-enzymatic sensing face huge challenge due to their complex size-, surface- and composition- dependent catalytic properties and low active site density. In this work, we designed a single-atom Pt supported on Ni(OH) 2 nanoplates/nitrogen-doped graphene (Pt 1 /Ni(OH) 2 /NG) as the first example for constructing a single-atom catalyst based electrochemical non-enzymatic glucose sensor. The resulting Pt 1 /Ni(OH) 2 /NG exhibited a low anode peak potential of 0.48 V and high sensitivity of 220.75 μA mM -1 cm -2 towards glucose, which are 45 mV lower and 12 times higher than those of Ni(OH) 2 , respectively. The catalyst also showed excellent selectivity for several important interferences, short response time of 4.6 s, and high stability over 4 weeks. Experimental and density functional theory (DFT) calculated results reveal that the improved performance of Pt 1 /Ni(OH) 2 /NG could be attributed to stronger binding strength of glucose on single-atom Pt active centers and their surrounding Ni atoms, combined with fast electron transfer ability by the adding of the highly conductive NG. Finally, this research sheds light on the applications of SACs in the field of electrochemical non-enzymatic sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗