Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fountain height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Dayside Ionospheric Superfountain

The Dayside Ionospheric Super-fountain modified SAMI2 code predicts the uplift, given storm-time electric fields, of the dayside near-equatorial ionosphere to heights of over 800 kilometers during magnetic storm intervals. This software is a simple 2D code developed over many years at the Naval Research Laboratory, and has importance relating to accuracy of GPS positioning, and for satellite drag.

Tsurutani, Bruce T.↗

Investigation of a laser Doppler velocimeter system to measure the flow field around a large scale V/STOL aircraft in ground effect

The flow field measured around a hovering 70 percent scale vertical takeoff and landing (V/STOL) aircraft model is described. The velocity measurements were conducted with a ground based laser Doppler velocimeter. The remote sensing instrumentation and experimental tests of the velocity surveys are discussed. The distribution of vertical velocity in the fan jet and fountain; the radial velocity in the wall jet and the horizontal velocity along the aircraft underside are presented for different engine rpms and aircraft height above ground. Results show that it is feasible to use a mobile laser Doppler velocimeter to measure the flow field generated by a large scale V/STOL aircraft operating in ground effect.

Zalay, A. D.↗

Investigation of a laser Doppler velocimeter system to measure the flow field of a large scale V/STOL aircraft in ground effect

An experimental research program for measuring the flow field around a 70 percent scale V/STOL aircraft model in ground effect is described. The velocity measurements were conducted with a ground-based laser Doppler velocimeter at an outdoor test pad. The remote sensing instrumentation, experimental tests, and results of the velocity surveys are discussed. The distribution of vertical velocity in the fan jet and fountain, the radial velocity in the wall jet and the horizontal velocity along the aircraft underside are presented for different engine rpms and aircraft heights above ground. The study shows that it is feasible to use a mobile laser Doppler velocimeter to measure the flow field generated by a large scale V/STOL aircraft operating in ground effect.

Zalay, A. D.↗

A DEEP X-RAY VIEW OF THE HOT HALO IN THE EDGE-ON SPIRAL GALAXY NGC 891

NGC 891 is a nearby edge-on galaxy that is similar to the Milky Way and has a hot X-ray-emitting halo that could arise from accretion, a galactic fountain, or a combination of the two. The metallicity of the gas can help distinguish between these models, and here we report on results that use 138 ks of archival Chandra data and 92 ks of new XMM-Newton data to measure the temperature and metallicity of the hot halo of the galaxy. We find good fits for a thermal model with kT {approx} 0.2 keV and Z {approx} 0.1 Z {sub Sun }, and rule out solar metallicity to more than 99% confidence. This result suggests accretion from the intergalactic medium as the origin for the hot halo. However, it is also possible to fit a two-temperature thermal model with solar metallicity where kT {sub 1} {approx} 0.1 keV and kT {sub 2} {approx} 0.25 keV. A consideration of the cooling rate and scale height prefers the single-temperature model. We also find that the cooling rate in the hot gas cannot explain the massive H I halo in the steady state. In addition, a galactic fountain model cannot eject enough mass to account for the H I halo, and we speculate that the neutral halo may be gas from a prior outflow that has since cooled.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiperiodic structure for unipolar fountain laser

The parameters providing suppression of the intersubband nonradiative relaxation between laser levels have been optimised based on the calculations of the potential profile and relaxation times for the active element of unipolar laser with strongly asymmetric (in height) barriers. The photoluminescence, photoluminescence excitation, and IR absorption spectra of a structure with a multiply repeated optimised active element have been investigated. The experimental data are found to be in good agreement with the calculation results. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

H I Clouds in the Lower Halo. I. The Galactic All-Sky Survey Pilot Region

We have detected over 400 H I clouds in the lower halo of the Galaxy within the pilot region of the Galactic All-Sky Survey (GASS), a region of the fourth quadrant that spans 18 deg. in longitude, 40 deg. in latitude, and is centered on the Galactic equator. These clouds have a median peak brightness temperature of 0.6 K, a median velocity width of 12.8 km s{sup -1}, and angular sizes {approx}<1deg . The motion of these clouds is dominated by Galactic rotation with a random cloud-to-cloud velocity dispersion of 18 km s{sup -1}. A sample of clouds likely to be near tangent points was analyzed in detail. These clouds have radii on the order of 30 pc and a median H I mass of 630 M{sub sun}. The population has a vertical scale height of 400 pc and is concentrated in Galactocentric radius, peaking at R = 3.8 kpc. This confined structure suggests that the clouds are linked to spiral features, while morphological evidence that many clouds are aligned with loops and filaments is suggestive of a relationship with star formation. The clouds might result from supernovae and stellar winds in the form of fragmenting shells and gas that has been pushed into the halo rather than from a galactic fountain.

99 GENERAL AND MISCELLANEOUS↗

Testing a dynamical equilibrium model of the extraplanar diffuse ionized gas in NGC 891

The observed scale heights of extraplanar diffuse ionized gas (eDIG) layers exceed their thermal scale heights by a factor of a few in the Milky Way and other nearby edge-on disk galaxies. Here, we test a dynamical equilibrium model of the eDIG layer in NGC 891, where we ask whether the thermal, turbulent, magnetic field, and cosmic-ray pressure gradients are sufficient to support the layer. In optical emission-line spectroscopy from the SparsePak integral field unit on the WIYN 3.5 m telescope, the Hα emission in position–velocity space suggests that the eDIG is found in a ring between galactocentric radii of R{sub min}⩽R⩽8 kpc, where R{sub min}⩾2 kpc. We find that the thermal (σ{sub th}=11 km s{sup −1}) and turbulent (σ{sub turb}=25 km s{sup −1}) velocity dispersions are insufficient to satisfy the hydrostatic equilibrium equation given an exponential electron scale height of h{sub z}=1.0 kpc. Using a literature analysis of radio continuum observations from the CHANG-ES survey, we demonstrate that the magnetic field and cosmic-ray pressure gradients are sufficient to stably support the gas at R⩾8 kpc if the cosmic rays are sufficiently coupled to the system (γ{sub cr}=1.45). Thus, a stable dynamical equilibrium model is viable only if the eDIG is found in a thin ring around R = 8 kpc, and nonequilibrium models such as a galactic fountain flow are of interest for further study.

79 ASTRONOMY AND ASTROPHYSICS↗

Detection of Extraplanar Diffuse Ionized Gas in M83

We present the first kinematic study of extraplanar diffuse ionized gas (eDIG) in the nearby, face-on disk galaxy M83 using optical emission-line spectroscopy from the Robert Stobie Spectrograph on the Southern African Large Telescope. We use a Markov Chain Monte Carlo method to decompose the [N ii]λλ 6548, 6583, Hα, and [S ii]λλ 6717, 6731 emission lines into H ii region and diffuse ionized gas emission. Extraplanar, diffuse gas is distinguished by its emission-line ratios ([N ii]λ6583/Hα ≳ 1.0) and its rotational velocity lag with respect to the disk (Δv=−24 km s{sup −1} in projection). With interesting implications for isotropy, the velocity dispersion of the diffuse gas, σ=96 km s{sup −1}, is a factor of a few higher in M83 than in the Milky Way and nearby, edge-on disk galaxies. The turbulent pressure gradient is sufficient to support the eDIG layer in dynamical equilibrium at an electron scale height of h{sub z}=1 kpc. However, this dynamical equilibrium model must be finely tuned to reproduce the rotational velocity lag. There is evidence of local bulk flows near star-forming regions in the disk, suggesting that the dynamical state of the gas may be intermediate between a dynamical equilibrium and a galactic fountain flow. As one of the first efforts to study eDIG kinematics in a face-on galaxy, this study demonstrates the feasibility of characterizing the radial distribution, bulk velocities, and vertical velocity dispersions in low-inclination systems.

79 ASTRONOMY AND ASTROPHYSICS↗

X-ray-emitting gas surrounding the spiral galaxy NGC 891

We observed the edge-on spiral galaxy NGC 891 with the Position Sensitive Proportional Counter (PSPC) on Roentgen Satellite (ROSAT) to search for how extraplanar gas expected in the galactic fountain model. Diffuse X-ray emission surrounds the disk with a Half Width at Half Maximum (HWHM) for the surface brightness perpendicular to the disk of 50 sec (2.4 kpc) and a radial extent of approximately 6.5 kpc, both of which are similar in extent to the extended H(alpha) and radio halo component; the implied density scale height for the hot gas is 7 kpc. The spectrum is best fitted with a hard stellar component and a soft diffuse gas component of temperature 3.6 x 10(exp 6) K. The density of this gas is 2 x 10(exp -3)/cu cm, the luminosity is 4.4 x 10(exp 39) ergs/s, the mass is 1 x 10(exp 8) solar mass, and the pressure (P/k) is 1.4 10(exp 4) K/cu cm. These data are consistent with this gas participating in a galactic fountain, where the material approaches hydrostatic equilibrium before cooling at a rate of 0.12 solar mass/yr. The cooled material may be responsible for some of the H(alpha) emission.

Bregman, Joel N.↗

Explosive Volcanic Eruptions from Linear Vents on Earth, Venus and Mars: Comparisons with Circular Vent Eruptions

Conditions required to support buoyant convective plumes are investigated for explosive volcanic eruptions from circular and linear vents on Earth, Venus, and Mars. Vent geometry (linear versus circular) plays a significant role in the ability of an explosive eruption to sustain a buoyant plume. On Earth, linear and circular vent eruptions are both capable of driving buoyant plumes to equivalent maximum rise heights, however, linear vent plumes are more sensitive to vent size. For analogous mass eruption rates, linear vent plumes surpass circular vent plumes in entrainment efficiency approximately when L(sub o) > 3r(sub o) owing to the larger entrainment area relative to the control volume. Relative to circular vents, linear vents on Venus favor column collapse and the formation of pyroclastic flows because the range of conditions required to establish and sustain buoyancy is narrow. When buoyancy can be sustained, however, maximum plume heights exceed those from circular vents. For current atmospheric conditions on Mars, linear vent eruptions are capable of injecting volcanic material slightly higher than analogous circular vent eruptions. However, both geometries are more likely to produce pyroclastic fountains, as opposed to convective plumes, owing to the low density atmosphere. Due to the atmospheric density profile and water content on Earth, explosive eruptions enjoy favorable conditions for producing sustained buoyant columns, while pyroclastic flows would be relatively more prevalent on Venus and Mars. These results have implications for the injection and dispersal of particulates into the planetary atmosphere and the ability to interpret the geologic record of planetary volcanism.

Glaze, Lori S.↗

Progress Toward Generation of a Navier-Stokes Database for a Harrier in Ground Effect

The Harrier YAV-8B aircraft is capable of vertical and short-field take-off and landing (V/STOL) by directing its four exhaust nozzles toward the ground, or conventional flight by rotating its nozzles into a horizontal position. The British Royal Air Force and the United States Marine Corps have used this aircraft for more than 30 years to provide a quick reaction time for troop support, and reduce the need for long runways. The success of this powered-lift (PL) vehicle has also prompted the more recent design of the Joint Strike Fighter (JSF). However there are significant safety issues that must be addressed when operating a PL vehicle in close proximity to the ground. Hot Gas Ingestion (HGI) by the inlets can result in a rapid loss of powered lift; and high-speed jet flows along the ground plane can induce low pressures underneath the vehicle, causing a 'suck-down' effect. Under these conditions, departure from controlled flight may occur. Moreover, unsteady ground vortices and jet fountains can affect the aircraft,s controllability and its proximity to ground troops. The viscous, time-dependent flow fields of PL vehicles are difficult to accurately and efficiently predict using Computational Fluid Dynamics (CFD). A number of researchers have used the time-dependent Reynolds-averaged Navier-Stokes (RANS) equations to compute flows for single and multiple jets in a cross-flow. A few have added some geometric complexity to the problem by computing flows for jet-augmented delta wings near a ground plane. Smith et.al. computed for the first time a single RANS solution about a simplified Harrier. This geometry included a fuselage, wing, leading edge root extension (LERX), inlets, and exhaust nozzles. All of these investigations cite two practical problems with computing these flows: 1) the need for improved solution accuracy; and, 2) the need for faster solution methods. We view the need for faster solution methods as key to improving the solution accuracy and making this class of computation more routine. One can hardly refine grids, explore the use of advanced turbulence models, and generate databases when it takes weeks of dedicated computer time for a single solution. Chaderjian, Ahmad, Pandya, and Murman have focused on reducing the time-to-solution for this very difficult and complex problem through process automation and exploitation of parallel computing. They began with the Harrier geometry reported, and added a deflected wing flap and empennage for greater realism. To date more than 80 solutions have been carried out. This paper will describe this process and progress made in reducing the time required to generate a simple longitudinal force and moment database for a Harrier in ground effect. It shows a typical snap-shot from an unsteady streakline animation, where fluid particles are colored by temperature. The ground vortex and a jet-fountain vortex are highlighted. It also shows a similar streakline image, where HGI occurs due to the vehicle in close proximity to the ground. It is show the mean lift coefficient as a function of angle of attack and height. The angle of attack range was 4 deg less than or = alpha less than or = 10 deg with an increment of 1 degree, and the height range was 10 ft less than or = h less than or = 30ft with an increment of 5 feet. This 35 solution database was extended to over 2500 cases using a monotone cubic-spline interpolation procedure. The suck-down effect (reduction of lift near the ground) is highlighted in the figure. The "cushion effect," the conventional reduction of lift as the vehicle moves out of ground effect, is also indicated. All 35 RANS solutions were obtained using 952 Silicon Graphics Origin 2000 and 3000 processors in dedicated mode for one week. Typically, 112 processors were assigned to each case. Some other cases used fewer processors to utilize all available CPUS. The final paper will report on the automation of the solution process, including: grid generation, job monitoring, solution completion criteria, and post processing. Moreover, improvements in parallel efficiency for a dual time-step algorithm for the RANS equations will also be presented. Results will be discussed in detail using unsteady streakline flow visualization to correlate unsteady flow structures with dominant aerodynamic frequencies. The stability derivatives, CL, and CL, will also be presented.

Chaderjian, Neal M.↗

Characteristics of wall jets produced by the impingement on a ground plane of rectangular jets of aspect ratio one through eight

The azimuthal distributions of wall jet radial momentum flux have been experimentally determined for the impingement of turbulent jets emanating from rectangular nozzles with exit area aspect ratios between one and eight. Data are presented for parametric variations in nozzle exit height, nozzle pressure ratio and jet impingement angle caused by rotation of the nozzle about the nozzle exit major and minor axes. The momentum flux distributions were found to be highly directional and sensitive to variations in the above parameters. The effect of nozzle spacing on the fountain normal force measured between a pair of aspect-ratio-two nozzles is also presented. Examples are given in which stagnation line calculations for two rectangular exit area nozzle configurations are compared with experimental results.

Kotansky, D. R.↗

Highly ionized interstellar gas located in the Galactic disk and halo

High-resolution IUE absorption line spectra have been obtained for 40 distant stars in order to study the distribution of interstellar H I, Si IV, C IV, and N V in the Galactic disk and lower halo. Respective midplane densities of 2 x 10 to the -9th, 7 x 10 to the -9th, and 3 x 10 to the -9th are found for Si IV, C IV, and Ni V. Both column density and velocity data indicate that the highly ionized gas (HIG) is considerably more extended in directions away from the Galactic plane than is H I or Si II. The absorption-line velocities for the halo HIG are consistent with the notion that halo gas in the inner Galaxy rotates more slowly than gas in the underlying disk. The derived column densities suggest an exponential scale height for the HIG of about 3 kpc; however, a simple exponential distribution is a poor representation of the distribution of the gas. It is concluded that a full explanation of the origin of the halo HIG will probably require a blending of ideas from the Galactic fountain and the photoionized halo models.

Savage, Blair D.↗

Aeroacoustic environment of an advanced STOVL aircraft in hover

The near-field aeroacoustic environment of a 6.02 pct scale advanced short takeoff and vertical landing aircraft is investigated in proximity to a simulated ground plane. The screech and impingement-tone characteristics of twin supersonic round and rectangular plumes are shown to be highly dependent on nozzle geometry and height above the ground plane. Shadowgraph and laser-sheet flow visualization are used to clarify the flowfield mechanisms responsible for time-dependent loads due to screech, impingement tones, and unsteady impingement of the upwash on the fuselage undersurface. Detailed dynamic pressure measurements from an array of transducers on the fuselage confirms that fountain impingement is responsible for the greatest unsteady loading.

Wlezien, Richard W.↗

Multi-phase nature of a radiation-driven fountain with nuclear starburst in a low-mass active galactic nucleus

The structures and dynamics of molecular, atomic, and ionized gases are studied around a low-luminosity active galactic nucleus (AGN) with a small (2×10{sup 6}M{sub ⊙}) black hole using three-dimensional (3D) radiation–hydrodynamic simulations. We studied, for the first time, the non-equilibrium chemistry for the X-ray-dominated region in the “radiation-driven fountain” with supernova feedback. A double hollow cone structure is naturally formed without postulating a thick “torus” around a central source. The cone is occupied with an inhomogeneous, diffuse ionized gas and surrounded by a geometrically thick (h/r≳1) atomic gas. Dense molecular gases are distributed near the equatorial plane, and energy feedback from supernovae enhances their scale height. Molecular hydrogen exists in a hot phase (>1000 K) as well as in a cold (<100 K), dense (>10{sup 3} cm{sup −3}) phase. The velocity dispersion of H{sub 2} in the vertical direction is comparable to the rotational velocity, which is consistent with near-infrared observations of nearby Seyfert galaxies. Using 3D radiation transfer calculations for the dust emission, we find polar emission in the mid-infrared band (12 μm), which is associated with bipolar outflows, as suggested in recent interferometric observations of nearby AGNs. If the viewing angle for the nucleus is larger than 75°, the spectral energy distribution is consistent with that of the Circinus galaxy. The multi-phase interstellar medium observed in optical/infrared and X-ray observations is also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbulent atmospheric plumes above line sources with an application to volcanic fissure eruptions on the terrestrial planets

The theory of turbulent plumes maintained above steady line sources of buoyancy is worked out in detail within the limitations of Taylor's entrainment assumption. It is applied to the structure of a pure plume injected into a stably stratified atmosphere. Volcanic basalt eruptions that develop from long, narrow vents create line source plumes, which rise well above the magmatic fire fountains playing near the ground level. The eruption of Laki in 1783 may provide an example of this style of eruption. Flood basalts are more ancient examples. Evidence of enormous fissure eruptions that occurred in the past on Mars and Venus also exists. Owing to the different properties of the atmospheres on these two planets from those on the earth, heights of line source plumes are expected to vary in the ratios 1:6:0.6 (earth:Mars:Venus). It is very unlikely that the observed increase of sulfur dioxide above the Venusian cloud deck in 1978 could have been due to a line source volcanic eruption, even if it had been a flood basalt eruption.

Stothers, Richard B.↗

THE EVOLUTION OF GAS CLOUDS FALLING IN THE MAGNETIZED GALACTIC HALO: HIGH-VELOCITY CLOUDS (HVCs) ORIGINATED IN THE GALACTIC FOUNTAIN

In the Galactic fountain scenario, supernovae and/or stellar winds propel material into the Galactic halo. As the material cools, it condenses into clouds. By using FLASH three-dimensional magnetohydrodynamic simulations, we model and study the dynamical evolution of these gas clouds after they form and begin to fall toward the Galactic plane. In our simulations, we assume that the gas clouds form at a height of z = 5 kpc above the Galactic midplane, then begin to fall from rest. We investigate how the cloud's evolution, dynamics, and interaction with the interstellar medium (ISM) are affected by the initial mass of the cloud. We find that clouds with sufficiently large initial densities (n {>=} 0.1 H atoms cm{sup -3}) accelerate sufficiently and maintain sufficiently large column densities as to be observed and identified as high-velocity clouds (HVCs) even if the ISM is weakly magnetized (1.3 {mu}G). However, the ISM can provide noticeable resistance to the motion of a low-density cloud (n {<=} 0.01 H atoms cm{sup -3}) thus making it more probable that a low-density cloud will attain the speed of an intermediate-velocity cloud rather than the speed of an HVC. We also investigate the effects of various possible magnetic field configurations. As expected, the ISM's resistance is greatest when the magnetic field is strong and perpendicular to the motion of the cloud. The trajectory of the cloud is guided by the magnetic field lines in cases where the magnetic field is oriented diagonal to the Galactic plane. The model cloud simulations show that the interactions between the cloud and the ISM can be understood via analogy to the shock tube problem which involves shock and rarefaction waves. We also discuss accelerated ambient gas, streamers of material ablated from the clouds, and the cloud's evolution from a sphere-shaped to a disk- or cigar-shaped object.

79 ASTRONOMY AND ASTROPHYSICS↗

The modeling and prediction of multiple jet VTOL aircraft flow fields in ground effect

An engineering methodology based on an empirical data base and analytical fluid dynamic models was developed for the prediction of propulsive lift system induced aerodynamic effects for multiple lift jet VTOL aircraft operating in the hover mode in and out of ground effect. The effects of aircraft geometry, aircraft orientation (pitch, roll) as well as height above ground are considered. Lift jet vector and splay directions fit the airframe, lift jet exit flow conditions, and both axisymmetric and rectangular nozzle exit geometry are also accommodated. The induced suckdown flows are computed from the potential flowfield induced by the turbulent entrainment of both the free jets and wall jets in ground effect and from the free jets alone out of ground effect. The methodology emphasized geometric considerations, computation of stagnation lines and fountain upwash inclination, fountain upwash formation and development, and fountain impingement on the airframe.

Kotansky, D. R.↗