SEARCH · Engineering Papers

Results for “flexible models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Model Order Reduction of Aeroservoelastic Model of Flexible Aircraft

This paper presents a holistic model order reduction (MOR) methodology and framework that integrates key technological elements of sequential model reduction, consistent model representation, and model interpolation for constructing high-quality linear parameter-varying (LPV) aeroservoelastic (ASE) reduced order models (ROMs) of flexible aircraft. The sequential MOR encapsulates a suite of reduction techniques, such as truncation and residualization, modal reduction, and balanced realization and truncation to achieve optimal ROMs at grid points across the flight envelope. The consistence in state representation among local ROMs is obtained by the novel method of common subspace reprojection. Model interpolation is then exploited to stitch ROMs at grid points to build a global LPV ASE ROM feasible to arbitrary flight condition. The MOR method is applied to the X-56A MUTT vehicle with flexible wing being tested at NASA/AFRC for flutter suppression and gust load alleviation. Our studies demonstrated that relative to the fullorder model, our X-56A ROM can accurately and reliably capture vehicles dynamics at various flight conditions in the target frequency regime while the number of states in ROM can be reduced by 10X (from 180 to 19), and hence, holds great promise for robust ASE controller synthesis and novel vehicle design.

aeroelasticity↗

NASA NTRS2004

Flexible Approximation Model Approach for Bi-Level Integrated System Synthesis

Bi-Level Integrated System Synthesis (BLISS) is an approach that allows design problems to be naturally decomposed into a set of subsystem optimizations and a single system optimization. In the BLISS approach, approximate mathematical models are used to transfer information from the subsystem optimizations to the system optimization. Accurate approximation models are therefore critical to the success of the BLISS procedure. In this paper, new capabilities that are being developed to generate accurate approximation models for BLISS procedure will be described. The benefits of using flexible approximation models such as Kriging will be demonstrated in terms of convergence characteristics and computational cost. An approach of dealing with cases where subsystem optimization cannot find a feasible design will be investigated by using the new flexible approximation models for the violated local constraints.

Sobieszczanski-Sobieski, Jaroslaw↗

NASA NTRS1989

Experimental validation of flexible robot arm modeling and control

Flexibility is important for high speed, high precision operation of lightweight manipulators. Accurate dynamic modeling of flexible robot arms is needed. Previous work has mostly been based on linear elasticity with prescribed rigid body motions (i.e., no effect of flexible motion on rigid body motion). Little or no experimental validation of dynamic models for flexible arms is available. Experimental results are also limited for flexible arm control. Researchers include the effects of prismatic as well as revolute joints. They investigate the effect of full coupling between the rigid and flexible motions, and of axial shortening, and consider the control of flexible arms using only additional sensors.

Ulsoy, A. Galip↗

NASA NTRS1988

Some nonlinear damping models in flexible structures

A class of nonlinear damping models is introduced with application to flexible flight structures characterized by low damping. Approximate solutions of engineering interest are obtained for the model using the classical averaging technique of Krylov and Bogoliubov. The results should be considered preliminary pending further investigation.

Balakrishnan, A. V.↗

NASA NTRS2019

Aeroelastic Indicial Response Reduced-Order Modeling for Flexible Flight Vehicles

A reduced-order modeling method capable of providing computationally efficient predictions of the nonlinear, unsteady aerodynamics encountered by flexible flight vehicles under- going forced oscillations is presented. Models are developed using indicial response theory, which characterizes a vehicle’s dynamics through identification of time-accurate aerodynamic responses due to step changes in the vehicle-state parameters, e.g., angle-of-attack, pitch rate. A coupled computational fluid dynamics aeroelastic analysis is proposed for identifying step (indicial) responses of flexible vehicles. In this approach, aeroelastic indicial responses are simulated via prescribed rigid body motions, while fluid-structure interactions are captured at the subiterative level through coupling to a linear modal structural solver. A nonlinear extension of indicial response theory is applied through time-dependent linear interpolation of a database of locally linear aeroelastic step responses. Reduced-order models are then created using the mathematical principle of convolution applied to the interpolated aeroelastic indicial responses to predict the time-dependent aerodynamic response of a flexible vehicle to any arbitrary prescribed flight maneuver. The NASA FUN3D computational fluid dynamics solver is utilized for simulating full-order trajectories and indicial response functions. Aerodynamic predictions were generated for the X-56A aircraft undergoing a series of harmonic forced oscillations. The s are shown to provide a practical option for evaluating the unsteady aerodynamics of flexible vehicles using high-fidelity simulations.

Hiller, Brett↗

NASA NTRS1993

A comparison of refined models for flexible subassemblies

Interactions between structure response and control of large flexible space systems have challenged current modeling techniques and have prompted development of new techniques for model improvement. Due to the geometric complexity of envisioned large flexible space structures, finite element models (FEM's) will be used to predict the dynamic characteristics of structural components. It is widely accepted that these models must be experimentally 'validated' before their acceptance as the basis for final design analysis. However, predictions of modal properties (natural frequencies, mode shapes, and damping ratios) are often in error when compared to those obtained from Experimental Modal Analysis (EMA). Recent research efforts have resulted in the development of algorithmic approaches for model improvement, also referred to as system or structure identification.

Smith, Suzanne Weaver↗

NASA NTRS1989

Maximum likelihood estimation for distributed parameter models of flexible spacecraft

A distributed-parameter model of the NASA Solar Array Flight Experiment spacecraft structure is constructed on the basis of measurement data and analyzed to generate a priori estimates of modal frequencies and mode shapes. A Newton-Raphson maximum-likelihood algorithm is applied to determine the unknown parameters, using a truncated model for the estimation and the full model for the computation of the higher modes. Numerical results are presented in a series of graphs and briefly discussed, and the significant improvement in computation speed obtained by parallel implementation of the method on a supercomputer is noted.

Taylor, L. W., Jr.↗

NASA NTRS1986

Reduced modeling of flexible structures for decentralized control

Based upon the modified finite element-transfer matrix method, this paper presents a technique for reduced modeling of flexible structures for decentralized control. The modeling decisions are carried out at (finite-) element level, and are dictated by control objectives. A simply supported beam with two sets of actuators and sensors (linear force actuator and linear position and velocity sensors) is considered for illustration. In this case, it is conjectured that the decentrally controlled closed loop system is guaranteed to be at least marginally stable.

Yousuff, A.↗

NASA NTRS2014

Static Aeroelastic and Longitudinal Trim Model of Flexible Wing Aircraft Using Finite-Element Vortex-Lattice Coupled Solution

This paper presents a static aeroelastic model and longitudinal trim model for the analysis of a flexible wing transport aircraft. The static aeroelastic model is built using a structural model based on finite-element modeling and coupled to an aerodynamic model that uses vortex-lattice solution. An automatic geometry generation tool is used to close the loop between the structural and aerodynamic models. The aeroelastic model is extended for the development of a three degree-of-freedom longitudinal trim model for an aircraft with flexible wings. The resulting flexible aircraft longitudinal trim model is used to simultaneously compute the static aeroelastic shape for the aircraft model and the longitudinal state inputs to maintain an aircraft trim state. The framework is applied to an aircraft model based on the NASA Generic Transport Model (GTM) with wing structures allowed to flexibly deformed referred to as the Elastically Shaped Aircraft Concept (ESAC). The ESAC wing mass and stiffness properties are based on a baseline "stiff" values representative of current generation transport aircraft.

Aeroelasticity↗

NASA NTRS1983

Two-Degree-of-Freedom Mount System for Flutter Models

Flexible rods replace conventional bearing supports to minimize structural damping. Aerodynamic damping not masked by effects of mount system, making more accurate studies possible of how aerodynamic damping varies as flow over model changed. New system called PAPA.

Farmer, M. G.↗

NASA NTRS1999

Development, Analysis and Testing of the High Speed Research Flexible Semispan Model

This report presents the work performed by Lockheed Martin Engineering and Sciences (LMES) in support of the High Speed Research (HSR) Flexible Semispan Model (FSM) wind-tunnel test. The test was conducted in order to assess the aerodynamic and aeroelastic character of a flexible high speed civil transport wing. Data was acquired for the purpose of code validation and trend evaluation for this type of wing. The report describes a number of activities in preparing for and conducting the wind-tunnel test. These included coordination of the design and fabrication, development of analytical models, analysis/hardware correlation, performance of laboratory tests, monitoring of model safety issues, and wind-tunnel data acquisition and reduction. Descriptions and relevant evaluations associated with the pretest data are given in sections 1 through 6, followed by pre- and post-test flutter analysis in section 7, and the results of the aerodynamics/loads test in section 8. Finally, section 9 provides some recommendations based on lessons learned throughout the FSM program.

Schuster, David M.↗

NASA NTRS2000

Flexible Wing Model for Structural Sizing and Multidisciplinary Design Optimization of a Strut-Braced Wing

This paper describes a structural and aeroelastic model for wing sizing and weight calculation of a strut-braced wing. The wing weight is calculated using a newly developed structural weight analysis module considering the special nature of strut-braced wings. A specially developed aeroelastic model enables one to consider wing flexibility and spanload redistribution during in-flight maneuvers. The structural model uses a hexagonal wing-box featuring skin panels, stringers, and spar caps, whereas the aerodynamics part employs a linearized transonic vortex lattice method. Thus, the wing weight may be calculated from the rigid or flexible wing spanload. The calculations reveal the significant influence of the strut on the bending material weight of the wing. The use of a strut enables one to design a wing with thin airfoils without weight penalty. The strut also influences wing spanload and deformations. Weight savings are not only possible by calculation and iterative resizing of the wing structure according to the actual design loads. Moreover, as an advantage over the cantilever wing, employment of the strut twist moment for further load alleviation leads to increased savings in structural weight.

Gern, Frank H.↗

NASA NTRS2006

Flutter of High-Speed Civil Transport Flexible Semispan Model: Time-Frequency Analysis

Time/frequency analysis of fluctuations measured by pressure taps and strain gauges in the experimental studies of the flexible semispan model of a high-speed civil transport wing configuration is performed. The interest is in determining the coupling between the aerodynamic loads and structural motions that led to the hard flutter conditions and loss of the model. The results show that, away from the hard flutter point, the aerodynamic loads at all pressure taps near the wing tip and the structural motions contained the same frequency components. On the other hand, in the flow conditions leading to the hard flutter, the frequency content of the pressure fluctuations near the leading and trailing edges varied significantly. This led to contribution to the structural motions over two frequency ranges. The ratio of these ranges was near 2:1, which suggests the possibility of nonlinear structural coupling.

Chabalko, Christopher C.↗

NASA NTRS1989

A general dynamic model of flexible robot arms for control

Hamilton's principle is used to derive the dynamic model for a large class of flexible robot arms. The resultant dynamic model consists of a system of partial differential-integral equations and the dynamic boundary conditions associated with it. Some properties of the model are observed, and its application to control is discussed. This model represents an infinite-dimensional nonlinear dynamic system and yet can be turned into a finite-dimensional system that could be obtained by modal expansion, if it is desired. This provides more flexibility for control purposes as well as for the analysis of the system.

Ding, X.↗

NASA NTRS1990

Reduced order component models for flexible multibody dynamics simulations

Many flexible multibody dynamics simulation codes require some form of component description that properly characterizes the dynamic behavior of the system. A model reduction procedure for producing low order component models for flexible multibody simulation is described. Referred to as projection and assembly, the method is a Rayleigh-Ritz approach that uses partitions of the system modal matrix as component Ritz transformation matrices. It is shown that the projection and assembly method yields a reduced system model that preserves a specified set of the full order system modes. Unlike classical component mode synthesis methods, the exactness of the method described is obtained at the expense of having to compute the full order system modes. The paper provides a comprehensive description of the method, a proof of exactness, and numerical results demonstrating the method's effectiveness.

Tsuha, Walter S.↗

NASA NTRS1983

Modeling of flexible surfaces: A preliminary study

The one-dimensional classical scalar string equation which involves linearization about a horizontal reference or equilibrium position is derived. We then derive a model for small motion about a nonhorizontal reference. The implications of our findings to modeling of flexible antenna surfaces such as that in the Maypole Hoop/Column antenna are discussed.

Banks, H. T.↗

NASA NTRS1991

Special class of nonlinear damping models in flexible space structures

A special class of nonlinear damping models is investigated in which the damping force is proportional to the product of positive integer or the fractional power of the absolute values of displacement and velocity. For a one-degree-of-freedom system, the classical Krylov-Bogoliubov 'averaging' method is used, whereas for a distributed system, both an ad hoc perturbation technique and the finite difference method are employed to study the effects of nonlinear damping. The results are compared with linear viscous damping models. The amplitude decrement of free vibration for a single mode system with nonlinear models depends not only on the damping ratio but also on the initial amplitude, the time to measure the response, the frequency of the system, and the powers of displacement and velocity. For the distributed system, the action of nonlinear damping is found to reduce the energy of the system and to pass energy to lower modes.

Hu, Anren↗

NASA NTRS2017

Advantage of Animal Models with Metabolic Flexibility for Space Research Beyond Low Earth Orbit

As the worlds space agencies and commercial entities continue to expand beyond Low Earth Orbit (LEO), novel approaches to carry out biomedical experiments with animals are required to address the challenge of adaptation to space flight and new planetary environments. The extended time and distance of space travel along with reduced involvement of Earth-based mission support increases the cumulative impact of the risks encountered in space. To respond to these challenges, it becomes increasingly important to develop the capability to manage an organisms self-regulatory control system, which would enable survival in extraterrestrial environments. To significantly reduce the risk to animals on future long duration space missions, we propose the use of metabolically flexible animal models as pathfinders, which are capable of tolerating the environmental extremes exhibited in spaceflight, including altered gravity, exposure to space radiation, chemically reactive planetary environments and temperature extremes.In this report we survey several of the pivotal metabolic flexibility studies and discuss the importance of utilizing animal models with metabolic flexibility with particular attention given to the ability to suppress the organism's metabolism in spaceflight experiments beyond LEO. The presented analysis demonstrates the adjuvant benefits of these factors to minimize damage caused by exposure to spaceflight and extreme planetary environments. Examples of microorganisms and animal models with dormancy capabilities suitable for space research are considered in the context of their survivability under hostile or deadly environments outside of Earth. Potential steps toward implementation of metabolic control technology in spaceflight architecture and its benefits for animal experiments and manned space exploration missions are discussed.

metabolic flexibility↗