Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fingerprints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Evaluation of Climate Fingerprinting Sounder Product (ClimFiSP) Air Temperature and H2O Trends

Climate fingerprinting Sounder Product (ClimFiSP) provides gridded (0.5x0.5) daily skin temperature, surface emissivity, air temperature, water vapor, trace gases, and cloud properties, which derived from IR hyper-spectral radiance measured by AIRS on Aqua and CrIS on SNPP and JPSS series. In this work, the ClimFiSP daily air temperature and H2O were retrieved on 98 pressure levels by applying the spectral fingerprint algorithm on 0.5x0.5 gridded daily mean radiances from Climate Hyperspectral Infrared Radiance Product (CHIRP). CHIRP is a stable climate-quality radiance time series spanning AIRS and CrIS. The air temperature and H2O monthly data and trends were calculated from the more than two decades long CHIRP AIRS data. Troposphere warming and stratosphere cooling can be seen in both ClimFiSP and ERA5 air temperature data. The ClimFiSP air temperature trends are also compared with the MW sounding air temperature trends to validate the ClimFiSP air temperature results. The H2O trends on upper troposphere are evaluated by comparing with the ERA5 H2O trends, and results show a reasonable agreement with two sets of results. The ClimFiSP algorithm provides a unique and fast way to retrieve the spatial-temporal change in climate variables from the corresponding change in radiances, gridded at the same spatial-temporal scale. This greatly facilitates the procession of long-term climate data records.

ClimFiSP↗
NASA NTRS1999

Theoretical and experimental tests of a chromosomal fingerprint for densely ionizing radiation based on F ratios calculated from stable and unstable chromosome aberrations

In the present study, F ratios for both stable chromosome aberrations, i.e. ratios of translocations to pericentric inversions, and unstable aberrations, i.e. dicentrics and centric rings, were measured using fluorescence in situ hybridization. F ratios for stable aberrations measured after exposure to low (2.89 Gy 60Co gamma rays) and high-LET (0.25 Gy 56Fe ions; 1.25 Gy 56Fe ions; 3.0 Gy 12C ions) radiation were 6.5 +/- 1.5, 4.7 +/- 1.6, 9.3 +/- 2.5 and 10.4 +/- 3.0, respectively. F ratios for unstable aberrations measured after low (2.89 Gy 60Co gamma rays) and high-LET (0.25 Gy 56Fe ions; 3.0 Gy 12C ions) radiations were 6.5 +/- 1.6, 6.3 +/- 2.3 and 11.1 +/- 3.7, respectively. No significant difference between the F ratios for low- and high-LET radiation was found. Further tests on the models for calculation of the F ratio proposed by Brenner and Sachs (Radiat. Res. 140, 134-142, 1994) showed that the F ratio may not be straightforward as a practical fingerprint for densely ionizing radiation.

NASA Center JSC↗
NASA NTRS1980

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 1: Compendium

The primary features of the overall study are encompassed and an evaluation of an automation system is presented. Objectives of the study are described, methods of evaluation are summarized and conclusions about the system's feasibility are presented. Also included is a brief history of fingerprint automation activities within the FBI, the organization of the FBI, a bibliography of documents and records, a data dictionary and a reference set of all of the transparencies presented throughout the study.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 4: Economic feasibility

The results of the economic analysis of the AIDS 3 system design are presented. AIDS 3 evaluated a set of economic feasibility measures including life cycle cost, implementation cost, annual operating expenditures and annual capital expenditures. The economic feasibility of AIDS 3 was determined by comparing the evaluated measures with the same measures, where applicable, evaluated for the current system. A set of future work load scenarios was constructed using JPL's environmental evaluation study of the fingerprint identification system. AIDS 3 and the current system were evaluated for each of the economic feasibility measures for each of the work load scenarios. They were compared for a set of performance measures, including response time and accuracy, and for a set of cost/benefit ratios, including cost per transaction and cost per technical search. Benefit measures related to the economic feasibility of the system are also presented, including the required number of employees and the required employee skill mix.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 6: Environmental analysis

The results of the analysis of the external environment of the FBI Fingerprint Identification Division are presented. Possible trends in the future environment of the Division that may have an effect on the work load were projected to determine if future work load will lie within the capability range of the proposed new system, AIDS 3. Two working models of the environment were developed, the internal and external model, and from these scenarios the projection of possible future work load volume and mixture was developed. Possible drivers of work load change were identified and assessed for upper and lower bounds of effects. Data used for the study were derived from historical information, analysis of the current situation and from interviews with various agencies who are users of or stakeholders in the present system.

Mulhall, B. D. L.↗
NASA NTRS1985

The distribution of compositional classes in the asteroid belt: A cosmochemical fingerprint?

Studies of the physical properties of the asteroids show a nonrandom distribution of types across the belt for asteroid classes E, S, M, F, C, P, and D. The general trend is for asteroids in the inner belt to have higher albedos and stronger mafic silicate absorption features than those asteroids located further out in the belt. One interpretation of this trend is that the asteroids, which occupy the region between the silicate rich terrestrial planets and the volatile rich outer planets, have preserved in their heliocentric compositional distribution a cosmochemical fingerprint of the thermodynamic conditions present in the solar nebula at the time of their formation. This hypothesis predicts that the differences in the spectral properties among the low albedo classes (C, P, F, P, and D) are due to temperature controlled processes which formed carbonaceous opaques. If this is true then the exact composition of the opaque components could, in principle, be used to determine the thermodynamic conditions between the orbits of Mars and Jupiter during the formation of the asteroids.

Gradie, J.↗
NASA NTRS1994

Fingerprinting Of Materials

Collection of three reports surveys emerging technology of chemical fingerprinting, which can be defined, loosely, as systematic application of modern methods of analysis to determine elemental or molecular compositions of materials, measure relative amounts of constituents of materials, and/or measure other relevant properties of materials.

Workman, Gary L.↗
NASA NTRS2002

Infrared Spectroscopy as a Chemical Fingerprinting Tool

Infrared (IR) spectroscopy is a powerful analytical tool in the chemical fingerprinting of materials. The technique is rapid, reproducible and usually non-invasive. With the appropriate accessories, the technique can be used to examine samples in either a solid, liquid or gas phase. Solid samples of varying sizes and shapes may be used, and with the addition of microscopic IR (microspectroscopy) capabilities, minute materials such as single fibers and threads may be examined. With the addition of appropriate software, microspectroscopy can be used for automated discrete point or compositional surface area mapping, with the latter providing a means to record changes in the chemical composition of a material surface over a defined area. Both aqueous and non-aqueous free-flowing solutions can be analyzed using appropriate IR techniques, as can viscous liquids such as heavy oils and greases. Due to the ability to characterize gaseous samples, IR spectroscopy can also be coupled with thermal processes such as thermogravimetric (TG) analyses to provide both thermal and chemical data in a single run. In this configuration, solids (or liquids) heated in a TG analyzer undergo decomposition, with the evolving gases directed into the IR spectrometer. Thus, information is provided on the thermal properties of a material and the order in which its chemical constituents are broken down during incremental heating. Specific examples of these varied applications will be cited, with data interpretation and method limitations further discussed.

Huff, Tim↗
NASA NTRS2003

Infrared Spectroscopy as a Chemical Fingerprinting Tool

Infrared (IR) spectroscopy is a powerful analytical tool in the chemical fingerprinting of materials. Any sample material that will interact with infrared light produces a spectrum and, although normally associated with organic materials, inorganic compounds may also be infrared active. The technique is rapid, reproducible and usually non-invasive to the sample. That it is non-invasive allows for additional characterization of the original material using other analytical techniques including thermal analysis and RAMAN spectroscopic techniques. With the appropriate accessories, the technique can be used to examine samples in liquid, solid or gas phase. Both aqueous and non-aqueous free-flowing solutions can be analyzed, as can viscous liquids such as heavy oils and greases. Solid samples of varying sizes and shapes may also be examined and with the addition of microscopic IR (microspectroscopy) capabilities, minute materials such as single fibers and threads may be analyzed. With the addition of appropriate software, microspectroscopy can be used for automated discrete point or compositional surface area mapping, with the latter providing a means to record changes in the chemical composition of a material surface over a defined area. Due to the ability to characterize gaseous samples, IR spectroscopy can also be coupled with thermal processes such as thermogravimetric (TG) analyses to provide both thermal and chemical data in a single run. In this configuration, solids (or liquids) heated in a TG analyzer undergo decomposition, with the evolving gases directed into the IR spectrometer. Thus, information is provided on the thermal properties of a material and the order in which its chemical constituents are broken down during incremental heating. Specific examples of these varied applications will be cited, with data interpretation and method limitations further discussed.

Huff, Timothy L.↗
NASA NTRS2006

Iron-Tolerant Cyanobacteria: Ecophysiology and Fingerprinting

Although the iron-dependent physiology of marine and freshwater cyanobacterial strains has been the focus of extensive study, very few studies dedicated to the physiology and diversity of cyanobacteria inhabiting iron-depositing hot springs have been conducted. One of the few studies that have been conducted [B. Pierson, 1999] found that cyanobacterial members of iron depositing bacterial mat communities might increase the rate of iron oxidation in situ and that ferrous iron concentrations up to 1 mM significantly stimulated light dependent consumption of bicarbonate, suggesting a specific role for elevated iron in photosynthesis of cyanobacteria inhabiting iron-depositing hot springs. Our recent studies pertaining to the diversity and physiology of cyanobacteria populating iron-depositing hot springs in Great Yellowstone area (Western USA) indicated a number of different isolates exhibiting elevated tolerance to Fe(3+) (up to 1 mM). Moreover, stimulation of growth was observed with increased Fe(3+) (0.02-0.4 mM). Molecular fingerprinting of unialgal isolates revealed a new cyanobacterial genus and species Chroogloeocystis siderophila, an unicellular cyanobacterium with significant EPS sheath harboring colloidal Fe(3+) from iron enriched media. Our preliminary data suggest that some filamentous species of iron-tolerant cyanobacteria are capable of exocytosis of iron precipitated in cytoplasm. Prior to 2.4 Ga global oceans were likely significantly enriched in soluble iron [Lindsay et al, 2003], conditions which are not conducive to growth of most contemporary oxygenic cyanobacteria. Thus, iron-tolerant CB may have played important physiological and evolutionary roles in Earths history.

Brown, I. I.↗
NASA NTRS2020

Fingerprints of External Forcing Agents on Sahel Rainfall: Aerosols, Greenhouse Gases, and Model-Observation Discrepancies

Over the 20th and 21st centuries, both anthropogenic greenhouse gas increases and changes in anthropogenic aerosols have affected rainfall in the Sahel. Using multiple characteristics of Sahel precipitation, we construct a multivariate fingerprint that allows us to distinguish between the model-predicted responses to greenhouse gases and anthropogenic aerosols. Models project the emergence of a detectable signal of aerosol forcing in the middle of the 20th century and a detectable signal of greenhouse gas forcing at the beginning of the 21st. However, the signals of both aerosol and greenhouse gas forcing in observations emerge earlier and are stronger than in the models, far stronger in the case of aerosols. The similarity between the response to aerosol forcing and the leading mode of internal variability makes it difficult to attribute this model-observation discrepancy to errors in the forcing, errors in the forced response, model inability to capture the amplitude of internal variability, or some combination of these. For greenhouse gases, however, the forced response is distinct from internal variability as estimated by models, and the observations are largely commensurate with the model projections.

Sahel↗
NASA NTRS1980

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 2: Technical feasibility

The results of this effort are presented in a manner for use by both the AIDS 3 Operational and Economic Feasibility subtasks as well as the Development of Alternative subtask. The approach taken was to identify the major functions that appear in AIDS 3 and then to determine which technologies would be needed for support. The technologies were then examined from the point of view of reliability, throughput, security, availability, cost and possible future trends. Whenever possible graphs are given to indicate projected costs of rapidly changing technologies.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 3: Operational feasibility

An evaluation is presented which is defined as the adequacy of system design with known functional and performance requirements. The proposed Rockwell International AIDS 3 card, document and data flow are presented to summarize the concepts involved and the relationships between functions. The analysis and evaluation includes a study of system capability, processing rates, search requirements and response accuracy as well as a consideration of operational components and hardware integration. Results indicate that the AIDS 3 System concept is operationally feasible if production capacity is slightly enhanced but that operational complexity, hardware integration and a lack of conceptual data pertinent to some of the functions are areas of concern.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 5: Current system evaluation

The performance, costs, organization and other characteristics of both the manual system and AIDS 2 were used to establish a baseline case. The results of the evaluation are to be used to determine the feasibility of the AIDS 3 System, as well as provide a basis for ranking alternative systems during the second phase of the JPL study. The results of the study were tabulated by subject, scope and methods, providing a descriptive, quantitative and qualitative analysis of the current operating systems employed by the FBI Identification Division.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 7: Top down functional analysis

The functions are identified and described in chart form as a tree in which the basic functions, to 'Provide National Identification Service,' are shown at the top. The lower levels of the tree branch out to indicate functions and sub-functions. Symbols are used to indicate whether or not a function was automated in the AIDS 1 or 2 system or is planned to be automated in the AIDS 3 system. The tree chart is shown in detail.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 8: Measures of effectiveness

The development of both quantitative criteria that were used to evaluate conceptional systems for automating the functions for the FBI Identification Division is described. Specific alternative systems for automation were compared by using these developed criteria, defined as Measures of Effectiveness (MOE), to gauge system's performance in attempting to achieve certain goals. The MOE, essentially measurement tools that were developed through the combination of suitable parameters, pertain to each conceivable area of system operation. The methods and approaches used, both in selecting the parameters and in using the resulting MOE, are described.

Mulhall, B. D. L.↗
NASA NTRS1980

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 9: Functional requirements

The current system and subsystem used by the Identification Division are described. System constraints that dictate the system environment are discussed and boundaries within which solutions must be found are described. The functional requirements were related to the performance requirements. These performance requirements were then related to their applicable subsystems. The flow of data, documents, or other pieces of information from one subsystem to another or from the external world into the identification system is described. Requirements and design standards for a computer based system are presented.

Source record↗