Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “filter optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Optimal filtering in the presence of unmodeled time correlated driving disturbances.

In many realistic data filtering problems, the cross correlation of the state estimation error and the state forcing function is unknown due to the poor knowledge of the time history of the forcing function. In this paper, the conservative and minimal approximation to the cross correlation terms is presented. It requires only the knowledge of the estimation error covariance and the forcing function covariance, with the choice of an associated free parameter left to the user. If the estimation error covariance and/or the forcing function covariance are bounded from above but not known exactly, the cross correlation approximation using those upper bounds remains conservative. This cross correlation approximation leads to a conservative approximation to the estimation error covariance matrix differential equation between measurement times. The free parameter is determined as the analytic solution to an associated optimal control problem. The procedure is expanded to include discrete linear measurement incorporation.

Fraser, D. C.↗
NASA NTRS1991

Estimation of optimal Kalman filter gain from non-optimal filter residuals

This paper presents a novel method of estimating the optimal steady state Kalman filter gain of a linear discrete time-invariant system from a non-optimal Kalman filter residual sequence. The relation between the optimal residual sequence and a signal derived from the non-optimal residual sequence is described by a Moving Average (MA) model whose coefficients are expressed in terms of the state space parameters and the optimal steady state Kalman filter gain. In order to identify the MA model, a whitening filter of the derived signal, which corresponds to an AutoRegressive (AR) model of the signal, is first identified using the least-squares method. Then the inverse filter of the whitening filter, which corresponds to the MA model, is calculated. From the coefficients of the identified MA model, the optimal steady state Kalman filter gain can be obtained. Numerical example is provided to illustrate the feasibility of this approach.

Chen, Chung-Wen↗
DOE OSTI2022

A Comprehensive Approach towards Multi-Objective EMI Filter Design Optimization in High-Frequency SiC-Based Motor Drives

With rapid penetration of high-frequency, highdensity power electronics into the industry, controlling the system generated EMI becomes one of the major design challenges. Designing practical optimized EMI filters require simultaneous consideration of multiple aspects - including electromagnetic couplings, magnetic materials, practical component parasitics and their impacts at high-frequencies, and also the overall manufacturing costs. The multi-dimensional nature of the problem often results in overcompensated designs that hurt the system efficiency and power density. This paper focuses on a comprehensive design platform (developed in MATLAB) towards designing high-density, optimized, highly efficient EMI filters by analyzing the generated noise spectrum and evaluating a vast array of potential solutions before outputting an optimized filter solution. The proposed tool includes database-based component selection, optimal topology selection, multistage filter design, overall optimization for volume, mass, cost and total loss. The proposed filter has been thoroughly evaluated in a PSIM simulation environment emulating the hardware in CRD300DA12EXM3, a 300kW three-phase inverter from Wolfspeed with an RL load representing a motor drive application. Furthermore, a 20kHz switching frequency is chosen and impacts of the motor high-frequency characteristics on the generated EMI noise spectrum of the overall system have been analyzed.

42 ENGINEERING↗
NASA NTRS1990

Design of optimal correlation filters for hybrid vision systems

Research is underway at the NASA Johnson Space Center on the development of vision systems that recognize objects and estimate their position by processing their images. This is a crucial task in many space applications such as autonomous landing on Mars sites, satellite inspection and repair, and docking of space shuttle and space station. Currently available algorithms and hardware are too slow to be suitable for these tasks. Electronic digital hardware exhibits superior performance in computing and control; however, they take too much time to carry out important signal processing operations such as Fourier transformation of image data and calculation of correlation between two images. Fortunately, because of the inherent parallelism, optical devices can carry out these operations very fast, although they are not quite suitable for computation and control type operations. Hence, investigations are currently being conducted on the development of hybrid vision systems that utilize both optical techniques and digital processing jointly to carry out the object recognition tasks in real time. Algorithms for the design of optimal filters for use in hybrid vision systems were developed. Specifically, an algorithm was developed for the design of real-valued frequency plane correlation filters. Furthermore, research was also conducted on designing correlation filters optimal in the sense of providing maximum signal-to-nose ratio when noise is present in the detectors in the correlation plane. Algorithms were developed for the design of different types of optimal filters: complex filters, real-value filters, phase-only filters, ternary-valued filters, coupled filters. This report presents some of these algorithms in detail along with their derivations.

Rajan, Periasamy K.↗
NASA NTRS1990

Mapping considerations for optimal binary correlation filters

The optimality of correlation filters is an important issue in applications of pattern recognition. Both binary phase-only filters (BPOFs) and amplitude encoded binary phase-only filters (AE BPOFs) are considered and the results of optimizing the filters for a real world object (the Space Shuttle) are studied. It is found that while only small improvements result from optimizing a BPOF, optimization of the AE BPOF is quite important in obtaining a useful correlation function. In the case of an AE BPOF, both signal-to-noise and peak-to-sidelobe measures must be studied. Computer simulation and experimental correlation results are presented.

Downie, John D.↗
NASA NTRS1989

Laboratory comparison of continuous vs. binary phase-mostly filters

Recent developments in spatial light modulators have led to devices which are capable of continuous phase modulation, even if only over a limited range. One of these devices, the deformable mirror device is used, to compare the relative merits of binary and partially-continuous phase filters in a specific problem of pattern recognition by optical correlation. Each filter was physically limited to only about a radiation of modulation. Researchers have predicted that for low input noise levels, continuous phase-only filters should have a higher absolute correlator peak output than the corresponding binary filters, as well as having a larger SNR. When continuous and binary filters were implemented on the DMD and they exhibited the same performance; an ad hoc filter optimization procedure was developed for use in the laboratory. The optimized continuous filter gave higher correlation peaks than did an independently optimized binary filter. Background behavior in the correlation plane was similar for the two filters, and thus the SNR showed the same improvement for the continuous filter. A phasor diagram analysis and computer simulation have explained part of the optimization procedure's success.

Monroe, Stanley E., Jr.↗
NASA NTRS1994

Optimal Correlation Filters for Images with Signal-Dependent Noise

We address the design of optimal correlation filters for pattern detection and recognition in the presence of signal-dependent image noise sources. The particular examples considered are film-grain noise and speckle. Two basic approaches are investigated: (1) deriving the optimal matched filters for the signal-dependent noise models and comparing their performances with those derived for traditional signal-independent noise models and (2) first nonlinearly transforming the signal-dependent noise to signal-independent noise followed by the use of a classical filter matched to the transformed signal. We present both theoretical and computer simulation results that demonstrate the generally superior performance of the second approach in terms of the correlation peak signal-to-noise ratio.

Downie, John D.↗
NASA NTRS1993

Optimal realizable filters and the minimum Euclidean distance principle

Minimizing a Euclidean distance in the complex plane optimizes a wide class of correlation metrics for filters implemented on realistic devices. The algorithm searches over no more than two real scalars (gain and phase). It unifies a variety of previous solutions for special cases (e.g., a maximum signal-to-noise ratio with colored noise and a real filter and a maximum correlation intensity with no noise and a coupled filter). It extends optimal partial information filter theory to arbitrary spatial light modulators (fully complex, coupled, discrete, finite contrast ratio, and so forth), additive input noise (white or colored), spatially nonuniform filter modulators, and additive correlation detection noise (including signal dependent noise).

Juday, Richard D.↗
DOE OSTI2023

High-bandwidth image-based predictive laser stabilization via optimized Fourier filters

Controlling the delivery of kHz-class pulsed lasers is of interest in a variety of industrial and scientific applications, from next-generation laser-plasma acceleration to laser-based x-ray emission and high-precision manufacturing. The transverse position of the laser pulse train on the application target is often subject to fluctuations by external drivers (e.g., room cooling and heating systems, motorized optics stages and mounts, vacuum systems, chillers, and/or ground vibrations). For typical situations where the disturbance spectrum exhibits discrete peaks on top of a broad-bandwidth lower-frequency background, traditional PID (proportional-integral-derivative) controllers may struggle, since as a general rule PID controllers can be used to suppress vibrations up to only about 5%–10% of the sampling frequency. Here, a predictive feed-forward algorithm is presented that significantly enhances the stabilization bandwidth in such laser systems (up to the Nyquist limit at half the sampling frequency) by online identification and filtering of one or a few discrete frequencies using optimized Fourier filters. Furthermore, the system architecture demonstrated here uses off-the-shelf CMOS cameras and piezo-electric actuated mirrors connected to a standard PC to process the alignment images and implement the algorithm. To avoid high-end, high-cost components, a machine-learning-based model of the piezo mirror’s dynamics was integrated into the system, which enables high-precision positioning by compensating for hysteresis and other hardware-induced effects. A successful demonstration of the method was performed on a 1 kHz laser pulse train, where externally-induced vibrations of up to 400 Hz were attenuated by a factor of five, far exceeding what could be done with a standard PID scheme.

Natal, Joseph↗
NASA NTRS1981

An optimal numerical filter for wide-field-of-view measurements of earth-emitted radiation

A technique is described in which all data points along an arc of the orbit may be used in an optimal numerical filter for wide-field-of-view measurements of earth emitted radiation. The statistical filter design is derived whereby the filter is required to give a minimum variance estimate of the radiative exitance at discrete points along the ground track of the satellite. An equation for the optimal numerical filter is given by minimizing the estimate error variance equation with respect to the filter weights, resulting in a discrete form of the Wiener-Hopf equation. Finally, variances of the errors in the radiant exitance can be computed along the ground track and in the cross track directions.

Smith, G. L.↗
NASA NTRS1994

Comparison of Kalman filter and optimal smoother estimates of spacecraft attitude

Given a valid system model and adequate observability, a Kalman filter will converge toward the true system state with error statistics given by the estimated error covariance matrix. The errors generally do not continue to decrease. Rather, a balance is reached between the gain of information from new measurements and the loss of information during propagation. The errors can be further reduced, however, by a second pass through the data with an optimal smoother. This algorithm obtains the optimally weighted average of forward and backward propagating Kalman filters. It roughly halves the error covariance by including future as well as past measurements in each estimate. This paper investigates whether such benefits actually accrue in the application of an optimal smoother to spacecraft attitude determination. Tests are performed both with actual spacecraft data from the Extreme Ultraviolet Explorer (EUVE) and with simulated data for which the true state vector and noise statistics are exactly known.

Sedlak, J.↗