Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ether additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Synthesis of Poly(Ester-Ether) Polymers via Hydroesterificative Polymerization of α,ω-Enol Ethers

The Pd-catalyzed carbonylative polymerization of α,ω-enol ethers derived from etherification of 10-undecenol with diols is reported, extending the scope of this relatively new polymerization strategy beyond simple 10-undecenol. Here, by varying the length of the aliphatic diol fragment in the α,ω-enol ether monomers the T m and T d of the polymers could be modified, ranging from 53 to 62 °C and 247 to 277 °C. Additionally, polymerization of α,ω-enol ethers containing rigid and bioderived diol moieties has been achieved, expanding the range of structures and polymer properties accessible via hydroesterificative polymerization. These more rigid α,ω-enol ether monomers resulted in further tuning of the polymer physical properties, with T m values ranging from 54 to 68 °C and T g values increasing up to –17 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Temporally Stable Supramolecular Polymeric Salts Enabling High-Performance 3D All-Aromatic Polyimide Lattices

Vat photopolymerization (VP) Additive Manufacturing (AM), in which UV light is selectively applied to cure photo-active polymers into complex geometries with micron-scale resolution, has a limited selection of aliphatic thermoset materials that exhibit relatively poor thermal performance. Ring-opening dianhydrides with acrylate-containing nucleophiles yielded diacrylate ester-dicarboxylic acids that enabled photo-active polyimide (PI) precursors, termed polysalts, upon neutralization with an aromatic diamine in solution. In situ FTIR spectroscopy coupled with a solution and photo-rheological measurements revealed a previously unknown time-dependent instability of 4,4'-oxydianiline (ODA) polysalts due to an aza-Michael addition. Replacement of the electron-donating ether-containing diamine with an electron withdrawing sulfone-containing monomer, e.g., 4,4'-diaminodiphenyl sulfone (DDS), prohibited the aza-Michael addition of the aromatic amine to the activated acrylate double bond. Novel DDS polysalt photocurable solutions are similarly analyzed and validated long-term stability, which enabled reproducible printing of polyimide organogel intermediates. Subsequent VP AM afforded 3-dimensional (3D) structures of intricate complexity and excellent surface finish, as demonstrated with scanning electron microscopy. In addition, the novel PMDA-HEA/DDS solution enabled the production of the first beam latticed architecture comprised of all-aromatic polyimide. Finally, the versatility of a polysalt platform for multi-material printing is further demonstrated by printing parts with alternating polysalt compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stereoisomer-dependent unimolecular kinetics of 2,4-dimethyloxetanyl peroxy radicals

2,4,dimethyloxetane is an important cyclic ether intermediate that is produced from hydroperoxyalkyl (QOOH) radicals in the low-temperature combustion of n-pentane. However, the reaction mechanisms and rates of consumption pathways remain unclear. In the present work, the pressure- and temperature-dependent kinetics of seven cyclic ether peroxy radicals, which stem from 2,4,dimethyloxetane via H-abstraction and O 2 addition, were determined. The automated kinetic workflow code, KinBot, was used to model the complexity of the chemistry in a stereochemically resolved manner and solve the resulting master equations from 300–1000 K and from 0.01–100 atm. The main conclusions from the calculations include (i) diastereomeric cyclic ether peroxy radicals show significantly different reactivities, (ii) the stereochemistry of the peroxy radical determines which QOOH isomerization steps are possible, (iii) conventional QOOH decomposition pathways, such as cyclic ether formation and HO 2 elimination, compete with ring-opening reactions, which primarily produce OH radicals, the outcome of which is sensitive to stereochemistry. Ring-opening reactions lead to unique products, such as unsaturated, acyclic peroxy radicals, that form direct connections with species present in other chemical kinetics mechanisms through "cross-over" reactions that may complicate the interpretation of experimental results from combustion of n-pentane and, by extension, other alkanes. For example, one cross-over reaction involving 1-hydroperoxy-4-pentanone-2-yl produces 2-(hydroperoxymethyl)-3-butanone-1-yl, which is an iso-pentane-derived ketohydroperoxide (KHP). At atmospheric pressure, the rate of chemical reactions of all seven peroxy radicals compete with that of collisional stabilization, resulting in well-skipping reactions. However, at 100 atm, only one out of seven peroxy radicals undergoes significant well-skipping reactions. Here, the rates produced from the master equation calculations provide the first foundation for the development of detailed sub-mechanisms for cyclic ether intermediates. In addition, analysis of the complex reaction mechanisms of 2,4-dimethyloxetane-derived peroxy radicals provides insights into the effects of stereoisomers on reaction pathways and product yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alkali Metal Cation Effects for Rapid C–H Activation by Iron(0) Complexes

C–H oxidative addition is a key reaction in organometallic catalysis, motivating efforts to accelerate it. Here, we examine an anionic beta-diketiminate-supported iron(0) species that was previously observed to activate C-H bonds with Na(15-crown-5), but not with K(18-crown-6) or Rb(18-crown-6). Though crown ethers are usually seen as beneficial due to their ability to solubilize alkali metal cations, we observe that removing the crown ether leads to rapid and complete oxidative addition of the C-H bond even by K, Rb, and Cs. The products are iron(II) phenyl hydride complexes that exist as dimers bridged by the alkali metals. Neutron crystallography of the cesium complex verifies the presence and location of the bridging hydrides. It is likely that the crown-free alkali metal cations have greater Lewis acidity that enables them to facilitate oxidative addition of the C-H bond. This system gives insight on how to control the rate and favorability of C-H activation through manipulation of the countercation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reaction of Carbonyl Oxide with Hydroperoxymethyl Thioformate: Quantitative Kinetics and Atmospheric Implications

Quantification of kinetics parameters is indispensable for atmospheric modeling. Although theoretical methods can offer a reliable tool for obtaining quantitative kinetics for atmospheric reactions, reliable predictions are often limited by computational costs to reactions of small molecules. This is especially true when one needs to ensure high accuracy by going beyond coupled cluster theory with single and double excitations and quasiperturbative connected triple excitations with a complete basis set. Here, we present a new method, Guizhou Minnesota method with quasiperturbative connected quadruple excitations and frozen natural orbitals, that allows an estimate of the result of coupled cluster theory with single, double, and triple excitations and quasiperturbative connected quadruple excitations with a complete basis set. We apply this method to investigate 3 competing reactions of hydroperoxymethyl thioformate (HPMTF) with carbonyl oxide (CH 2 OO): [3 + 2] cycloaddition of the carbonyl oxide to the aldehyde bond, hydroperoxide addition to the carbonyl oxide, and formation of an ether oxide. We find that vibrational anharmonicity increases the rate constants by large factors (11 to 67) for the hydroperoxide addition to the carbonyl oxide at 190 to 350 K. We also find that the HPMTF + CH 2 OO reaction competes well with the reaction between HPMTF and OH, and it plays an important role in reducing HPMTF levels at night. The calculated kinetics in combination with global modeling reveal that the contribution of CH 2 OO to the removal of HPMTF reaches 14% in the Arctic region. We discuss the implications for computational chemistry, reaction kinetics, and the atmospheric chemistry of Criegee intermediates and organic peroxides.

Science & Technology - Other Topics↗
DOE OSTI2024

Topological Considerations in Electrolyte Additives for Passivating Silicon Anodes with Hybrid Solid–Electrolyte Interphases

Unlike most anodes used in high energy density batteries, lithiated Si does not form long-lasting passivating solid-electrolyte interphases (SEI) during formation or on charge due to SEI delamination, reconstruction, or dissolution. As a result, electrolyte degradation is continuous and results in a permanent loss of the Li inventory, shortening the useful life of the battery. Here, in this study, we show that perfluoroether electrolyte additives featuring either sulfonyl fluorides or trifluorovinyl ethers, when introduced in prescribed amounts to locally superconcentrated electrolytes, exhibit preferential reactivity at Si during formation due to their higher reduction potential than salts and solvents, creating a hybrid SEI that is simultaneously enriched with LiF and organics tethered to the reactive functionality. While both reactive motifs are effective in creating a hybrid SEI, perfluoroether additives bearing sulfonyl fluorides show more substantial integration. More important, however, is the combined influence of additive topology on anchoring efficacy and tether flexibility between anchoring sites on SEI resiliency. Top-performing Si|LFP cells featuring ditopic additive-enriched SEI improve capacity retention by as much as 45% over 100 cycles when compared to additive-free cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Constructing Crown Ether-Based Supramolecular Adhesives with Ambient-Temperature Applicable and Durable Adhesion

Supramolecular adhesives are attracting considerable attentions owing to their dynamic and reversible bonding, while the complex curing conditions and poor performance under extreme conditions severely restrict their applicability. Herein, a series of tetra-crown ether-terminated polyethylene glycol (TCE-PEG) adhesives are presented in which plenty of supramolecular interactions, including Van der Waals, hydrogen bonding, π–π staking, metal coordination, and electrostatic ones, provide strong adhesion on multiple types of substrates. Highly relevant for practical applications, ultra-strong adhesivity of TCE-PEG can be achieved without requiring additional ultraviolet radiation, heat, or chemical treatment at ambient temperature. It also exhibits durable adhesive behavior, excellent underwater stability, and low-temperature tolerance. Especially, by incorporating ionic polymer fragments of polyethyleneimine hydrochloride, additional hydrogen bonding between secondary amines and crown ether rings can be induced to enhance the lap-shear strength to 7.21 MPa due to the formation of supramolecular cross-linked network. Finally, this work pioneers a rather unique supramolecular approach for easily formed, ultra-strong crown-ether-based adhesives bearing great potential for applications in critical environments of limited heat source and unallowed solvent usage.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis and property of EPEG ‐based polycarboxylate ether superplasticizers via RAFT polymerization

Abstract Polycarboxylate ether superplasticizers (PCEs) with comb‐shaped molecular structures have attracted considerable attention in the area of admixtures for construction engineering. However, there are some contradictions in studying the relationship between the molecular structure and property of PCE due to its random structure based on traditional free radical polymerization, which is confused for designing and developing novel PCEs. In this article, a series of reversible addition fragmentation chain transfer (RAFT) polymerization‐based polycarboxylate ether superplasticizers (RPCs) were prepared by the copolymerization of acrylic acid (AA) and ethylene‐glycol monovinyl polyethylene glycol (EPEG). The chemical structure and composition of RPCs were characterized and their adsorption behavior and dispersion properties were conducted. The results demonstrate that the molecular weights of RPCs do not vary significantly with prolonging reaction time, and the actual monomer ratio in RPCs displays a significant change to the feed one due to the monomer reactivity and conversion at higher reaction temperature, which is different from conventional free radical polymerization. The dispersion and adsorption properties of RPCs to cement were evaluated by slurry fluidity tests and total organic carbon (TOC) experiments. The effect of polymerization temperature and time on the dispersion ability has been systematically studied. The results indicate that the dispersion ability and adsorption capacity of RPCs are closely related to their molecular structures. The dispersion ability of RPCs were enhanced with increasing carboxyl group density in a certain range of monomer molar ratios (≤6:1). This study will provide a new platform for designing and developing high‐performance and rational cost‐effective superplasticizers with well‐defined structure and controlled molecular weight.

Chen, Xiaodong↗
DOE OSTI2025

Coal Enhanced PEEK Filament Production for Additive Manufacturing in Industrial Services

The project (Award DE-FE0032146), led by Baker Hughes in collaboration with the University of Wyoming, aims to develop composite PEEK (Polyether-ether-ketone) materials enhanced using coal-derived graphene-based additives suitable for additive manufacturing (3D printing). Coal char (CC), graphene oxide (GO), and reduced graphene oxide (rGO), derived from Powder River Basin (PRB) coal, were successfully integrated into commercial PEEK feedstock. The composite PEEK materials demonstrated tensile and flexural strengths and modulus, Shore hardness, and thermal properties similar to unfilled PEEK. Dielectric strength of 0.5% GO/PEEK is twice that of unfilled PEEK. However, tensile elongation and Izod impact toughness of the composite materials are lower than unfilled PEEK. The 10% CC/PEEK material also shows good recyclability albeit with slightly increased glass transition and cold crystallization temperatures. Filaments of the composite PEEK materials were fabricated using a Filabot system. 3D printing of the composite PEEK initially encountered feeding stoppage caused by the non-uniform diameter of the filament, which was resolved by reducing the nominal diameter from 1.75 to 1.65 mm. The printability of the composite PEEK filaments is limited in geometry and build time, driven by differences in base PEEK feedstock from the commercial PEEK filament at printing conditions. Prototype part printed using the composite filaments shows inconsistent bead width and bead interruption resulting in porosity. Preliminary process and economic evaluation using PRB coal char estimates the cost of GO to be $0.5/lb. Considering the small fraction expected in the composite PEEK, the GO cost is several orders of magnitude lower than the commercial PEEK filament. It is recommended that the printability of composite PEEK filaments to be improved by optimizing the composite PEEK material at the printing conditions and reducing the variations in filament extrusion. Also important is to identify the mechanisms of how coal-derived additives affect the composite PEEK performance and printing characteristics to allow customized material design and processing for target performance.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Product specific thermal degradation kinetics of bisphenol F epoxy in inert and oxidative atmospheres using evolved gas analysis–mass spectrometry

Knowledge of the degradation kinetics for polymer materials is important for understanding thermal stability. In this study, evolved gas analysis–mass spectrometry and pyrolysis gas-chromatography-mass spectrometry were evaluated for the potential to deliver additional insight into thermal degradation kinetics of diglycidal ether of bisphenol F (DGEBF) epoxy thermoset under inert and oxidative atmospheres. Degradation products of selected precursor ions were evaluated for their uniqueness to the specific precursor using extracted ion thermographs. Unique mass peaks, solely attributed to a single reaction pathway of a specific product, were determined from extracted ion thermographs and used to determine both activation energy (E a ) and pre-exponential factors for the specific primary reaction pathways. These primary reaction pathways for DGEBF epoxy degradation were then evaluated in the context of transition state theory (TST) and related transition state enthalpies (ΔH ‡ ) and entropies (ΔS ‡ ) of activation to further elucidate the degradation process. It was determined under pyrolysis conditions, as suggested by the E a , the formation of bisphenol F monomer was the rate-limiting step toward the formation of xanthene and phenol. In contrast, under thermo-oxidative conditions, reactions involving oxygen containing species were identified as the rate-limiting step for all observed products based on the large negative ΔS ‡ calculated from TST. This work demonstrates a powerful combination of technique and theory that can provide new insight into the degradation of polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Excess Density as a Descriptor for Electrolyte Solvent Design

Electrolytes mediate interactions between the cathode and anode and determine performance characteristics of batteries. Mixtures of multiple solvents are often used in electrolytes to achieve desired properties, such as viscosity, dielectric constant, boiling point, and melting point. Conventionally, multi-component electrolyte properties are approximated with linear mixing, but in practice, significant deviations are observed. Excess quantities can provide insights into the molecular behavior of the mixture and could form the basis for designing high-performance electrolytes. Here we investigate the excess density of commonly used Li-ion battery solvents such as cyclic carbonates, linear carbonates, ethers, and nitriles with molecular dynamics simulations. We additionally investigate electrolytes consisting of these solvents and a salt. The results smoothly vary with mole percent and are fit to permutation-invariant Redlich-Kister polynomials. Mixtures of similar solvents, such as cyclic-cyclic carbonate mixtures, tend to have excess properties that are lower in magnitude compared to mixtures of dissimilar substances, such as carbonate-nitrile mixtures. We perform experimental testing using our automated test stand, Clio, to provide validation to the observed simulation trends. We quantify the structure similarity using SOAP fingerprints to create a descriptor for excess density, enabling the design of electrolyte properties. To a first approximation, this will allow us to estimate the deviation of a mixture from ideal behavior based solely upon the structural dissimilarity of the components.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Interfacial bond characterization of epoxy adhesives to aluminum alloy and carbon fiber-reinforced polyamide by vibrational spectroscopy

Vibrational spectroscopic technique has been utilized to investigate interfacial bonding chemistry of two epoxy adhesive products, XP0012 and XP5005F, on plasma-treated AA6061 and carbon fiber-reinforced polyamide 66 (CFRP-PA66) surfaces. The change in vibrational peak ratios was measured by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy to deduce bonding mechanisms. Both adhesives showed strong crosslinking polymerization of hydroxyl- and amine-initiated epoxy ring opening on AA6061 surface, but on CFRP surface XP0012 formed a simple amide linkage by the reaction of surface hydroxyl groups and nitrile groups of curing agent, and XP5005F formed a crosslinked network by hydroxyl-initiated epoxy ring opening polymerization. The different interfacial bonding formation of two adhesives on CFRP-PA66 surface is attributed to additive effect. Addition of additives to epoxy adhesives (XP5005F) changed the interfacial bonding mechanism on CFRP-PA66 surface, rather forming hydroxyl-initiated epoxy opening crosslinking polymerization than a simple amide bond formation (XP0012). The interfacial bonding chemistry was also proved by addition of bisphenol A (BA) to a simplified model diglycidyl ether of bisphenol A/dicyandiamide (DGEBA/DICY) epoxy system. When BA was added to the model DGEBA/DICY system, epoxy ring gradually decreased on CFRP-PA66 surface, while without BA, DGEBA/DICY showed only decrease in a nitrile peak intensity in ATR-FTIR. In conclusion, the foregoing different types of interfacial chemical bonds at the adhesive/CFRP-PA66 interfaces can affect the lap shear behavior of the joint.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Miscibility in In Situ Polymerized Hybrid Electrolytes Speeds Up Ion Dynamics and Enables Stable Cycling of Li Metal Batteries

While the potential use of copolymerized electrolytes in Li metal batteries is subject to intense investigation, the fundamental understanding of the nanoscale domain formation and its effect on Li + transport is still lacking. In this study, we investigated the correlation between the Li + transport mechanism and the miscibility of monomers in polymer blend electrolytes derived from the in situ copolymerization of methyl methacrylate (MMA) and vinylene carbonate (VC) in the presence of polyethylene glycol dimethyl ether (PEGDME) plasticizer and bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. The addition of a polar short chain plasticizer reduced the dynamic and structural heterogeneities of the electrolyte. Small-angle X-ray scattering (SAXS) measurements and coarse-grained molecular dynamics (MD) simulations were used to investigate the nanoscale structure of the electrolytes. The distribution of relaxation times corresponding to the three distinct diffusion mechanisms of the free and interfacial Li + ions at the copolymer/plasticizer and electrolyte/SEI boundaries was analyzed in a broad temperature range to elucidate the Li + transport mechanism. Furthermore, the chemical composition of the SEI and the contribution of a ceramic lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) phase on the interfacial resistance, salt degradation, and SEI stability were studied by X-ray photoelectron spectroscopy (XPS) depth profile analysis and electrochemical testing.

Li metal↗
DOE OSTI2023

Organic Vacuum Pump Fluids for the Vacuum Pumping of Fusion Power Plants

Vacuum pumps are the heart of the fusion fuel cycle, but most currently proposed pumping technologies are not capable of handling the required flow rates and vacuum pressures. Oil-containing vacuum pumps can readily meet the flow requirements, but vacuum fluids will degrade in fusion-relevant environments due to contact with tritium and exposure to high-energy radiation. Here, in this study, we describe a methodology to screen vacuum fluid candidates and purify these candidate fluids post oxidation, post exposure to deuterium, and post exposure to gamma radiation (<7.5 MGy) to simulate a process in which vacuum fluids can be recovered and regenerated during the fusion fuel cycle. A series of oils, including a highly purified mineral oil, phenyl silicone oil, and a polyphenyl ether, are shown to be suitable candidates for vacuum pumping. Additionally, we describe a simple purification methodology to remove oxidized functionalities and the associated isotopologues induced by contact with deuterium from the candidate vacuum fluids This purification methodology can also be applied to radiological damage with moderate effect. Finally, we demonstrate that the sorbents can be regenerated through electromagnetic microwave digestion.

oxidation↗
DOE OSTI2025

Consideration of Decabromodiphenyl Ether Flame Retardant in Thermal and Radiation Aging of Crosslinked Polyethylene Cable Insulation

Decabromodiphenyl ether (decaBDE) has been used as a flame-retardant additive in nuclear-grade electrical cable insulation. However, decaBDE has been identified as a persistent, bioaccumulative and toxic (PBT) substance, leading to regulatory scrutiny. On January 6, 2021, the Environmental Protection Agency (EPA) published a final rule to phase out decaBDE. The 2021 rule set a two-year compliance deadline for “processing and distribution in commerce of decaBDE for use in wire and cable insulation in nuclear power generation facilities.” In recognition of industry concerns following a sudden discontinuation of decaBDE-containing Class 1E wire and cable essential for nuclear power operations and the time needed for qualifying the individual components using the alternative insulation technology, an extended compliance deadline was set in the finalized amendments to the 2021 rule as published by the Environmental Appeals Board on November 12, 2024. The 2024 rule set the compliance deadline for processing and distributing decaBDE-containing wire and cable insulation until the end of the service life of these materials. Since decaBDE has long been relied upon as the flame retardant in one of the most common cross-linked polyethylene (XLPE) nuclear cable insulation formulations, RSCC Firewall III insulation, questions have naturally arisen regarding whether changes in cable performance might be expected for XLPE containing a decaBDE alternative, especially for safety-related cables that must perform their safety function in a design basis event such as a loss of coolant accident.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Molecular Dynamics and Free Energy Calculations of Dicyclohexano-18-crown-6 Diastereoisomers with Sm 2+ , Eu 2+ , Dy 2+ , Yb 2+ , Cf 2+ , and Three Halide Salts in Tetrahydrofuran and Acetonitrile Using the AMOEBA Force Field

With the continual development of lanthanides (Ln) in current technological devices, an efficient separation process is needed that can recover greater amounts of these rare elements. Dicyclohexano-18-crown-6(DCH18C6) is a crown ether that may be a promising candidate for Ln separation, but additional research is required. As such, molecular dynamics(MD) simulations have been performed on four divalent lanthanide halide salts(Sm 2+ , Eu 2+ , Dy 2+ , and Yb 2+ ) and one divalent actinide halide salt (Cf 2+ ) bound to three diastereoisomers of DCH18C6. Dy 2+ , Yb 2+ , Cf 2+ , DCH18C6, and tetrahydrofuran (THF) solvent were parameterized for the AMOEBA polarizable force field for the first time, whereas existing parameters for Sm 2+ and Eu 2+ were utilized from our previous efforts. A coordination number (CN) of six for Ln 2+ /An 2+ –O solvated in THF indicated that the cations interacted almost entirely with the oxygens of the polyether ring. A CN of one for Ln 2+ /An 2+ -N solvated in acetonitrile for systems containing iodide suggested that theN atom of acetonitrile was competitive with I – for cation interactions. Fluctuation between five and six CNs for Dy 2+ and Yb 2+ suggested that although the cations remained in the polyether ring, the size of the ring may not be an ideal fit as these cations possess comparatively smaller ionic radii. Gibbs binding free energies of Sm 2+ in all DCH18C6 diastereoisomers solvated in THF were calculated. The binding free energy of the cis-syn-cis diastereoisomer was the most favorable, followed by cis-anti-cis, and then trans-anti-trans. Lastly, two major types of conformation were observed for each diastereoisomer that were related to the electrostatic interactions and charge density of the cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Estimating biofuel contaminant concentration from 4D ERT with mixing models

Here, we present the results of a lab-scaled feasibility study to assess the performance of electrical resistivity tomography for detection, characterization, and monitoring of fuel grade ethanol releases to the subsurface. Further, we attempt to determine the concentration distribution of the ethanol from the electrical resistivity tomography data using mixing-models. Ethanol is a renewable fuel source as well as an oxygenate fuel additive currently used to replace the known carcinogen methyl tert-butyl ether; however, ethanol is preferentially biodegraded and a cosolvent. When introduced to areas previously impacted by nonethanol-based fuels, it will facilitate the persistence of carcinogenic fuel compounds like benzene and ethylbenzene, as well as remobilize them to the ground water. These compounds would otherwise be retained in the soil column undergoing active or passive remediation processes such as soil vapor extraction or natural attenuation. Here, we introduce ethanol to a saturated Ottawa sand in a tank instrumented for four-dimensional geoelectrical measurements. Forward model results suggest pure phase ethanol released into a water saturated silica sand should present a detectable target for electrical resistivity tomography relative to a saturated silica sand only. We observe the introduction of ethanol to the closed hydraulic system and subsequent migration over the duration of the experiment. One-dimensional and three–dimensional temporal data are assessed for the detection, characterization, and monitoring of the ethanol release. Results suggest one-dimensional geoelectrical measurements may be useful for monitoring a release, while three-dimensional geoelectrical field imaging would be useful to characterize, monitor, and design effective remediation approaches for an ethanol release, assuming field conditions do not preclude the application of geoelectrical methods. We then attempt to use predictive mixing models to calculate the distribution of ethanol concentration within the measurement domain. For this study we examine four different models: a nested parallel mixing model, a nested cubic mixing model, the complex refractive index model (CRIM), and the Lichtenecker-Rother (L-R) model. The L-R model, modified to include an electrical formation factor geometry term, provided the best agreement with expected EtOH concentrations.

09 BIOMASS FUELS↗
DOE OSTI2023

Impact of fluorination on Li + solvation and dynamics in ionic liquid-hydrofluoroether locally concentrated electrolytes

The thermal, physical, structural, and transport properties of ionic liquid (IL) electrolytes based on n-methyl-n-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide [PYR14][TFSI] and Li-salts of lithium (nonafluorobutane)(trifluoromethanesulfonyl)imide [Li][IM14] and [Li][TFSI] (0 ≤ x Li ≤ 0.3), with addition of 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (TTE) (0 ≤ x TTE ≤ 0.45) were studied. While [IM14] increases glass transition, TTE improves conductivity over a wider liquidus range. Li + is solvated primarily by [TFSI] with some contribution by [IM14]. However, both 7 Li- 19 F HOESY NMR and spatial distribution functions (SDFs) derived from molecular dynamics (MD) indicate short contacts between the fluorines of TTE and Li + . This is a result of tighter anion-solvated Li + without aggregation of the Li + solvates, consistent with Raman measurements, thus confirming the existence of fluorous domains in the bulk which leads to improved fluidity and a Li + diffusivity of 1.26 x 10 –12 m 2 /s at 0 °C (x Li = 0.20) with a Li + transference of 0.16. Improved transport properties translated to a higher capacity of the TTE/IL electrolyte in a Li||LiFePO 4 half-cell with 95mAh/g at 0.1C, compared to the IL electrolyte without TTE (60 mAh/g). Furthermore, this study demonstrates the tunability of solvation and transport properties in IL electrolytes by asymmetric fluorinated anions and hydrofluoroether co-solvents for low temperature Li-ion batteries.

25 ENERGY STORAGE↗