Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy monitoring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

TPSAS-NF1676L-27534-DND

This presentation describes the preparation, validation and provision of MERRA-2 data products to the building industry for use in energy efficient designs, building codes and monitoring energy efficiency. It highlights efforts to use MERRA-2 surface meteorological data products for the derivation of quantities relevant to the energy and building industry such as heating and cooling degree days and building climate zones on a global basis for the past 30 years. A difference of the zones from the first 15 years and last 30 years shows that warming zones are creeping northward. The talk also presents work provide similar parameters for building energy performance assessment requiring data products closer to real time.

Paul W Stackhouse, Jr↗

The total and spectral solar irradiance and its possible variations

The present status of knowledge of the total and spectral irradiance of the sun is briefly reviewed. Currently accepted values of the solar constant and the extraterrestrial solar spectral irradiance are presented along with a discussion of how they were derived. Data on the variability of the solar constant are shown to be conflicting and inconclusive. Some of the alleged sun-weather relationships are cited in support of the need of knowing more precisely the variations in total and spectral solar irradiance. An overview of a solar monitoring program is discussed, with special emphasis on the Solar Energy Monitor in Space experiment which was proposed for several spacecraft missions. It is a combination of a solar constant detector and a prism monochromator. The determination of absolute values and the possible variations of the total and spectral solar irradiance, from measurements outside of the atmosphere is discussed.

Thekaekara, M. P.↗

Solar irradiance - Total and spectral and its possible variations

The present status of our knowledge of the total and spectral irradiance of the sun is briefly reviewed. The currently accepted NASA/ASTM standard values of the solar constant and the extraterrestrial solar spectral irradiance are presented. The uncertainties in these values are relatively high. Data on the variability of the solar constant are conflicting and inconclusive. The variability of solar spectral irradiance is almost totally unknown and unexplored. Some alleged sun-weather relationships are cited in support of the need to know more precisely the variations in total and spectral solar irradiance. An overview of the solar monitoring program of NASA is presented, with special emphasis on the Solar Energy Monitor in Space (SEMIS) experiment which has been proposed for several spacecraft missions. The monitor is a combination of a solar-constant detector and a prism monochromator.

Thekaekara, M. P.↗

Atmospheric energy input and ionization by energetic electrons during the geomagnetic storm of 8-9 November 1991

The Atmospheric X-ray Imaging Spectrometer (AXIS) of the Particle Environment Monitor investigation aboard the Upper Atmosphere Research Satellite monitors energy input to the upper atmosphere due to energetic electrons. Analysis of the AXIS data from the major geomagnetic storm of 8-9 November 1991 is presented. During the November storm, electrons above a few keV flowing into a substantially expanded auroral zone provided the bulk of the ionizing power to the upper atmosphere. At the peak of the disturbance the total AXIS-observed power reached 40 GW. On 9 November the whole day average atmospheric ionization rate in the auroral zone at 80 km altitude exceeded the rate due to solar UV and solar X-rays by a factor of over 10 to 100.

Chenette, D. L.↗

Lidar System for Airborne Measurement of Clouds and Aerosols

A lidar system for measuring optical properties of clouds and aerosols at three wavelengths is depicted. The laser transmitter is based on a Nd:YVO4 laser crystal pumped by light coupled to the crystal via optical fibers from laser diodes that are located away from the crystal to aid in dissipating the heat generated in the diodes and their drive circuits. The output of the Nd:YVO4 crystal has a wavelength of 1064 nm, and is made to pass through frequency-doubling and frequency-tripling crystals. As a result, the net laser output is a collinear superposition of beams at wavelengths of 1064, 532, and 355 nm. The laser operates at a pulse-repetition rate of 5 kHz, emitting per-pulse energies of 50 microJ at 1064 nm, 25 microJ at 532 nm and 50 microJ at 355 nm. An important feature of this system is an integrating sphere located between the laser output and the laser beam expander lenses. The integrating sphere collects light scattered from the lenses. Three energy-monitor detectors are located at ports inside the integrating sphere. Each of these detectors is equipped with filters such that the laser output energy is measured independently for each wavelength. The laser output energy is measured on each pulse to enable the most accurate calibration possible. The 1064-nm and 532-nm photodetectors are, more specifically, single photon-counting modules (SPCMs). When used at 1064 nm, these detectors have approximately 3% quantum efficiency and low thermal noise (fewer than 200 counts per second). When used at 532 nm, the SPCMs have quantum efficiency of about 60%. The photodetector for the 355-nm channel is a photon-counting photomultiplier tube having a quantum efficiency of about 20%. The use of photon-counting detectors is made feasible by the low laser pulse energy. The main advantage of photon-counting is ease of inversion of data without need for complicated calibration schemes like those necessary for analog detectors. The disadvantage of photon-counting detectors is that they inherently have narrow dynamic ranges. However, by using photon-counting detectors along with a high-repetition rate laser, it is possible to obtain wide dynamic range through accumulation of counts over many pulses.

McGill, Matthew↗

Western energy related overhead monitoring project. Phase 2: Summary

Assistance by NASA to EPA in the establishment and maintenance of a fully operational energy-related monitoring system included: (1) regional analysis applications based on LANDSAT and auxiliary data; (2) development of techniques for using aircraft MSS data to rapidly monitor site specific surface coal mine activities; and (3) registration of aircraft MSS data to a map base. The coal strip mines used in the site specific task were in Campbell County, Wyoming; Big Horn County, Montana; and the Navajo mine in San Juan County, New Mexico. The procedures and software used to accomplish these tasks are described.

Anderson, J. E.↗

Temporal variations of the anomalous oxygen component, 1977 - 1984

A survey is of the long term temporal variations of 6.6 to 12 MeV/nucleon anomalous oxygen at 1 AU covering the period 1977 to 1984. This time interval included the recent solar maximum, with the recovery at neutron monitor energies beginning in 1982. During this time interval, 6.6 to 12 MeV/nucleon 0 fluxes decreased by at least a factor of 50, and indeed remained below the instrumental detection threshold after 1979. By late 1984, neutron monitors had recovered to roughly 1979 levels from the 1982 solar maximum, and anomalous O still remained below the detection threshold.

Mason, G. M.↗

Welder analyzer

Welder analyzer circuit evaluates and certifies resistance welding machines. The analyzer measures peak current, peak voltage, peak power, total energy, and first-pulse energy. It is used as an energy monitor while welding is being performed, or a precision shunt load for a pure electrical evaluation of the weld machine.

Miller, L. L.↗

Modulation and diffusion theory of cosmic rays

Papers given on the modulation of galactic cosmic rays by the solar wind at the 14th International Cosmic Ray Conference are reviewed. Some of the topics treated in this review are Pioneer and Helios radial gradient measurement, heliolatitude effects in modulation models, diffusion (scattering) theory - including pitch angle diffusion diagrams - solar flare particle transport theory and cosmic ray fluctuations at neutron monitor energies.

Forman, M. A.↗

Sun Tracker Operates a Year Between Calibrations

Low-cost modification of Sun tracker automatically compensates equation of time and seasonal variations in declination of Sun. Output of Scotch Yoke drive mechanism adjusted through proper sizing of crank, yoke and other components and through choice of gear ratios to approximate seasonal northand south motion of Sun. Used for industrial solar-energy monitoring and in remote meteorological stations.

Berdahl, C. M.↗

YAG aerosol lidar

The Global Atmospheric Backscatter Experiment (GLOBE) Mission, using the NASA DC-8 aircraft platform, is designed to provide the magnitude and statistical distribution of atmospheric backscatter cross section at lidar operating wavelengths. This is a fundamental parameter required for the Doppler lidar proposed to be used on a spacecraft platform for global wind field measurements. The prime measurements will be made by a CO2 lidar instrument in the 9 to 10 micron range. These measurements will be complemented with the Goddard YAG Aerosol Lidar (YAL) data in two wavelengths, 0.532 and 1.06 micron, in the visible and near-infrared. The YAL, is being designed to utilize as much existing hardware, as feasible, to minimize cost and reduce implementation time. The laser, energy monitor, telescope and detector package will be mounted on an optical breadboard. The optical breadboard is mounted through isolation mounts between two low boy racks. The detector package will utilize a photomultiplier tube for the 0.532 micron channel and a silicon avalanche photo detector (APD) for the 1.06 micron channel.

Sullivan, R.↗

Edge technique for measurement of laser frequency shifts including the Doppler shift

A method is disclosed for determining the frequency shift in a laser system by transmitting an outgoing laser beam. An incoming laser beam having a frequency shift is received. A first signal is acquired by transmitting a portion of the incoming laser beam to an energy monitor detector. A second signal is acquired by transmitting a portion of the incoming laser beam through an edge filter to an edge detector, which derives a first normalized signal which is proportional to the transmission of the edge filter at the frequency of the incoming laser beam. A second normalized signal is acquired which is proportional to the transmission of the edge filter at the frequency of the outgoing laser beam. The frequency shift is determined by processing the first and second normalized signals.

Korb, Larry↗

Cosmic ray decreases and shock structure: A multispacecraft study

We examine greater than 60-MeV/amu ion data from three spacecraft (IMP 8 and Helios 1 and 2) at the time of a number of short term (less than 20-day duration) cosmic ray decreases (greater than 1 GeV) detected by ground-based neutron monitors in the years 1976 to 1979. The multispacecraft data allow us to investigate the structure of the modulation region and in particular the relative importance, as a function of location, of the shock and shock driver (ejecta) in causing the reduction in particle densities. Although the shocks contributing to cosmic ray decrease often have particle enhancements associated with them in the greater than 60-meV/amu data, this is not the case for three of the events discussed in this paper where a shock-associated decrease is also evident. Whereas the shock can cause an increase or decrease at low (i.e., less than neutron monitor) energies, the reduction of particle densities in the driver, if it is intercepted, is usually evident at all energies. Thus the overall shape of a decrease at greater than 60 MeV/amu depends primarily on whether the ejecta is intercepted. We find that the particle density inside ejecta increases with increasing radical distance from the Sun. In many of the events in this study, entry and exit of ejecta are accompanied by abrupt changes in the decrease and recovery rates which indicate that the effect of the ejecta is local. In contrast, the effect of the shock lasts many days after the shock has passed by and is evident at large angular distances from the longitude of the solar source, i.e., the effect of the shock is nonlocal. Within 1 AU there seems to be no radial dependence of the shock effect. One cosmic ray decrease seen at Earth, which had an unusual profile, can be understood if the median plane of the ejecta was inclined to the ecliptic.

Cane, H. V.↗

Lidar Measurements of Tropospheric Wind Profiles with the Double Edge Technique

Research has established the importance of global tropospheric wind measurements for large scale improvements in numerical weather prediction. In addition, global wind measurements provide data that are fundamental to the understanding and prediction of global climate change. These tasks are closely linked with the goals of the NASA Earth Science Enterprise and Global Climate Change programs. NASA Goddard has been actively involved in the development of direct detection Doppler lidar methods and technologies to meet the wind observing needs of the atmospheric science community. A variety of direct detection Doppler wind lidar measurements have recently been reported indicating the growing interest in this area. Our program at Goddard has concentrated on the development of the edge technique for lidar wind measurements. Implementations of the edge technique using either the aerosol or molecular backscatter for the Doppler wind measurement have been described. The basic principles have been verified in lab and atmospheric lidar wind experiments. The lidar measurements were obtained with an aerosol edge technique lidar operating at 1064 nm. These measurements demonstrated high spatial resolution (22 m) and high velocity sensitivity (rms variances of 0.1 m/s) in the planetary boundary layer (PBL). The aerosol backscatter is typically high in the PBL and the effects of the molecular backscatter can often be neglected. However, as was discussed in the original edge technique paper, the molecular contribution to the signal is significant above the boundary layer and a correction for the effects of molecular backscatter is required to make wind measurements. In addition, the molecular signal is a dominant source of noise in regions where the molecular to aerosol ratio is large since the energy monitor channel used in the single edge technique measures the sum of the aerosol and molecular signals. To extend the operation of the edge technique into the free troposphere we have developed a variation of the edge technique called the double edge technique. In this paper a ground based aerosol double edge lidar is described and the first measurements of wind profiles in the free troposphere obtained with this lidar will be presented.

Gentry, Bruce M.↗

Long-Term Monitoring of the High-Energy Gamma-Ray Emission from LS I +61 deg 303 and LS 5039

The Fermi Large Area Telescope (LAT) reported the first definitive gigaelectron volts detections of the binaries LS I +61 deg 303 and LS 5039 in the first year after its launch in 2008 June. These detections were unambiguous as a consequence of the reduced positional uncertainty and the detection of modulated gamma-ray emission on the corresponding orbital periods. An analysis of new data from the LAT, comprising 30 months of observations, identifies a change in the gamma-ray behavior of LS I +61 deg 303. An increase in flux is detected in 2009 March and a steady decline in the orbital flux modulation is observed. Significant emission up to 30 gigaelectron volts is detected by the LAT; prior data sets led to upper limits only. Contemporaneous terraelectron volt observations no longer detected the source, or found it-in one orbit-close to periastron, far from the phases at which the source previously appeared at terraelectron volt energies. The detailed numerical simulations and models that exist within the literature do not predict or explain many of these features now observed at gigaelectron volt and terraelectron volt energies. New ideas and models are needed to fully explain and understand this behavior. A detailed phase-resolved analysis of the spectral characterization of LS I +61 deg 303 in the gigaelectron volt regime ascribes a power law with an exponential cutoff spectrum along each analyzed portion of the system's orbit. The on-source exposure of LS 5039 is also substantially increased with respect to our prior publication. In this case, whereas the general gamma-ray properties remain consistent, the increased statistics of the current data set allows for a deeper investigation of its orbital and spectral evolution.

High-energy↗

A radiation belt monitor for the High Energy Transient Experiment Satellite

A Radiation Belt Monitor (RBM) sensitive to protons and electrons with energy approximately greater than 0.5 MeV has been designed for the High Energy Transient Experiment (HETE) satellite in order to: first, control the on-off configuration of the experiments (i.e. those susceptible to proton damage); and second, to indicate the presence of proton and/or electron events that could masquerade as legitimate high energy photon events. One of the two RBM channels has an enhanced sensitivity to electrons. Each channel of the RBM, based on a PIN silicon diode, requires a typical power of 6 milliwatts. Tests have been performed with protons with energies from approximately 0.1 to 2.5 MeV (generated by a Cockcroft-Walton linear accelerator via the d(d,p)t reaction), and with electrons with energies up to 1 MeV (from a 1.0 microcurie Bi-207 source).

Lo, D. H.↗

Application of MODIS-Derived Active Fire Radiative Energy to Fire Disaster and Smoke Pollution Monitoring

The radiative energy emitted by large fires and the corresponding smoke aerosol loading are simultaneously measured from the MODIS sensor from both the Terra and Aqua satellites. Quantitative relationships between the rates of emission of fire radiative energy and smoke are being developed for different fire-prone regions of the globe. Preliminary results are presented. When fully developed, the system will enable the use of MODIS direct broadcast fire data for near real-time monitoring of fire strength and smoke emission as well as forecasting of fire progression and smoke dispersion, several hours to a few days in advance.

Ichoku, Charles↗

Future monitoring of charged particle energy deposition into the upper atmosphere and comments on possible relationships between atmospheric phenomena and solar and/or geomagnetic activity

Monitoring of earth's atmosphere was conducted for several years utilizing the ITOS series of low-altitude, polar-orbiting weather satellites. A space environment monitoring package was included in these satellites to perform measurements of a portion of earth's charged particle environment. The charged particle observations proposed for the low-altitude weather satellite TIROS N, are described which will provide the capability of routine monitoring of the instantaneous total energy deposition into the upper atmosphere by the precipitation of charged particles from higher altitudes. Such observations may be of use in future studies of the relationships between geomagnetic activity and atmospheric weather pattern developments. Estimates are given to assess the potential importance of this type of energy deposition. Discussion and examples are presented illustrating the importance of distinguishing between solar and geomagnetic activity as possible causative sources. Such differentiation is necessary because of the widely different spatial and time scales involved in the atmospheric energy input resulting from these various sources of activity.

Williams, D. J.↗