Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elemental materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Analysis of Element Size and Element Type on SS304L Material Model Performance

Finite element solutions are only valid if the information inputted into the models is a valid assumption. This is why it is important to determine if the model behaves as expected especially in the material response. Material models that consider deformation in the elastic and plastic regions are desirable. As a material deforms plastically, hardening will occur until the ultimate strength is reached due to the reduction of the cross sectional area in a uniaxial tensile test environment. A phenomenological approximation of this behavior which is known as power law hardening (plh) can be expressed as σ = σ y + K $ϵ^{n}_{p}$ where K and n are empirically determined constants, and σ y is the proportional limit of the material. The first objective of this study is to verify the behavior for a calibrated plh material model for selective deviatoric hexahedral elements when applied to a different material stock. The Sierra SM input for this calibrated model can be found in the appendix. The second objective of this study is to determine the differences in failure characteristics for considerably large shell elements versus that of fine hexahedral elements.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Validation of electron backscattering in the MCNP6.3 code

A new electron backscattering validation suite has been developed for the MCNP® code. The calculations in this suite cover both condensed history and single-event transport methods, seven different elemental materials ranging from beryllium to uranium, and incident electron energies from 200 eV to 14.1 MeV. In general, the accuracy of the MCNP code for electron backscattering calculations is energy-dependent. For incident electron energies below 2 keV, the condensed history method is not applied while the single-event method shows poor agreement with experimental measurements due to poor accuracy of the underlying atomic data. For incident energies between 2 keV and 256 keV, the single-event method typically shows better agreement with experiments, while for incident energies above 256 keV the condensed history method gives better accuracy. Additionally, agreement with experimental data is generally worse for low- Z materials such as beryllium and carbon, which may reflect deficiencies in the data or physics underlying electron transport through light elements in the MCNP code. The new electron backscattering validation suite, along with the previously introduced electron stopping power and Lockwood energy deposition validation suites, provide MCNP users with a quantified understanding of the uncertainties in electron transport calculations. Future improvements to electron transport in the MCNP code are necessary for low energies (≤ 2 keV) and for low- Z materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ab initio-based metric for predicting the protectiveness of surface films in aqueous media

Abstract Materials can passivate by forming surface films when placed in aqueous media. However, these films may or may not be stable, and their stability can be predicted by a metric called the Pilling-Bedworth Ratio (PBR). In this article, we extend PBR to predict passivation protectiveness of multi-component materials. We then evaluate this PBR (ePBR)’s effectiveness by comparing its predictions against experimental studies of 21 multi-element materials of diverse chemistries, with agreement for 17 of the materials. Finally, we encode the methodology to compute ePBR in a web-application to predict the protectiveness of 140,000+ materials in the Materials Project database.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reconstructing Masses of Merging Neutron Stars from Stellar r -process Abundance Signatures

We report that neutron star mergers (NSMs) are promising astrophysical sites for the rapid neutron-capture ("r") process, but can their integrated yields explain the majority of heavy-element material in the Galaxy? One method to address this question implements a forward approach that propagates NSM rates and yields along with stellar formation rates and compares those results with observed chemical abundances of r-process-rich, metal-poor stars. In this work, we take the inverse approach by utilizing r-process-element abundance ratios of metal-poor stars as input to reconstruct the properties -especially the masses - of their neutron star (NS) binary progenitors. This novel analysis provides an independent avenue for studying the population of the original NS binary systems that merged and produced the r-process material now incorporated in Galactic metal-poor halo stars. We use ratios of elements typically associated with the limited-r-process and the actinide region to those in the lanthanide region (i.e., Zr/Dy and Th/Dy) to probe the NS masses of the progenitor merger. We find that NSMs can account for all r-process material in metal-poor stars that display r-process signatures, while simultaneously reproducing the present-day distribution of double-NS systems. Notably, with our model assumptions and the studied stellar sample, we postulate that the most r-process enhanced stars (the r–II stars) on their own would require progenitor NSMs of asymmetric systems that are distinctly different from present ones in the Galaxy. We also explore variations to the model and find that the predicted degree of asymmetry is most sensitive to the electron fraction of the remnant disk wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Identifying the speciation of salt-based actinides in the presence of contaminants [Slides]

Molten salt reactors (MSR) present advantages over light water reactors, such as higher safety and energy efficiency, convenient waste processing, and the ability to use more abundant thorium instead of uranium as the fuel source. However, due to the high temperatures associated with these reactors the reactor container corrosion product can have a high influence on the molten salt system, and they are considered as a part of the fuel salt system. It is essential to have a comprehensive understanding of the chemical reactions that are occurring in the molten salt in the presence of contaminants such as nickel, manganese, chromium chlorides and oxides. Because they can change the local structure of these salts and the local structures of these salts govern the thermophysical properties of the molten salts, which would determine the safety and operational parameters of the reactor. This study is focused on identifying f-element materials speciation resulting from reaction with corrosion/degradation products in a molten salt environment to understand the flow of MSR. In this work, f-element chlorides are mixed with alkali and alkali earth metals and corrosion products such as transition metal chlorides are introduced systematically, inside a glovebox. Then these are heated to around 700 ? and slowly cooled to room temperature. Afterwards, these are analyzed using different characterization techniques such as powder X-ray diffraction, UV-vis and Raman spectroscopy and solid-state NMR. The initial work was conducted with lanthanide chlorides as a surrogate for actinides and the acquired data strongly indicates that in the presence of corrosion products new phase formation/ change in coordination environments occurs. This work has been presented at multiple conference presentations. The proposed work would allow to extend this work to actinides (depleted uranium and thorium) and this would assist to identify the speciation of actinide chloride in the presence of corrosion products. Also, this work would open an opportunity to compare the coordination behavior of lanthanides with the actinides.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2024

Accurate machine-learning predictions of coercivity in high-performance permanent magnets

Increased demand for high-performance permanent magnets in the electric vehicle and wind-turbine industries has prompted the search for cost-effective alternatives. Discovering magnetic materials with the desired intrinsic and extrinsic permanent magnet properties presents a significant challenge to researchers because of issues with the global supply of rare-earth elements, material stability, and a low maximum magnetic energy product BH max . While first-principles density functional theory (DFT) predicts materials’ magnetic moments, magnetocrystalline anisotropy constants, and exchange interactions, it cannot compute extrinsic properties such as coercivity (H c ). Although it is possible to calculate H c theoretically with micromagnetic simulations, the predicted value is larger than the experiment by almost an order of magnitude due to the Brown paradox. To circumvent these issues, we employ machine-learning (ML) methods on an extensive database obtained from experiments, DFT calculations, and micromagnetic modeling. The use of a large experimental dataset enables realistic H c predictions for materials such as Ce-doped Nd 2 ⁢Fe 14 ⁢B, comparing favorably against micromagnetically simulated coercivities. Remarkably, our ML model accurately identifies uniaxial magneto-crystalline anisotropy as the primary contributor to H c . With DFT calculations, we predict the Nd-site-dependent magnetic anisotropy behavior in Nd 2 ⁢Fe 14 ⁢B, confirming that Nd 4⁢g sites mainly contribute to uniaxial magnetocrystalline anisotropy, and also calculate the Curie temperature (T c ). Finally, both calculated results are in good agreement with the experiments. The coupled experimental dataset and ML modeling with DFT input predict H c with far greater accuracy and speed than was previously possible using micromagnetic modeling. Further, we reverse engineer the grain-boundary and intergrain exchange coupling with micromagnetic simulations by employing the ML predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Uncertainty quantification for Joule heating processes in fibrous pore-resolved media

Joule heating (JH) is an energy-efficient and sustainable technique for heating materials. Its application for industrial heating, particularly, has been gaining attention due to its potential for increasing the yield of various chemical products. The process involves the use of heating elements (materials that are highly conductive electrically and thermally) to heat up other materials or substances. These conductors, however, can exhbit varying degrees of uncertainty due to non-linearities in their temperature-dependent properties, which could result in variable material behavior. In this work, we carry out uncertainty quantification (UQ) at the pore scale to describe the uncertainty of such materials. In so doing, we applied the non-intrusive polynomial chaos expansion (PCE) technique to quantify the uncertainty within the system. The steady state Joule heating equation was solved numerically at the pore scale mimicking conditions within a heating chamber for propane dehydrogenation, and various electro-thermal profiles were obtained. We also examined the effect of the number of sampling points (20 – 100) and order of the PCE coefficients (2 – 5) on the accuracy of the temperature evaluations. The results were then benchmarked with the standard Monte Carlo (MC) method. The average temperature of the 4th-order global PCE showed good agreement with the MC results (which were positively skewed). Orders greater than 4 gave an underestimation of the temperatures while predictions for the peak temperature improved as the number of sampling points increased.

Fagbemi, Samuel [ORNL] (ORCID:0000000236995025)↗
DOE OSTI2020

Linking chemical precursors to the synthesis of erythritol tetranitrate

Erythritol tetranitrate (ETN) is a homemade explosive with high explosive performance which can easily be synthesized using widely available chemical precursors. Ascertaining the manner in which ETN is synthesized and being able to trace the ETN back to its precursor materials may aid in the forensic identification. As a proof of concept, seven different types of ETN were synthesized with laboratory grade materials as well as commercially available chemicals from the hardware store and grocery store. The seven different types of solid ETN and the reaction quenches were analyzed using high performance liquid chromatography (HPLC). Partial least squares discriminant analysis (PLS-DA) was used to probe the different classes of ETN and reaction quenches. Several PLS-DA models were produced with the seven different types of ETN and quenches having their own classification, ETN and quenches based on their acid source, and ETN and the quenches based on their nitrate source. Regardless of which classification manner was used, there were no differences found between the different types of ETN or their reaction quenches. Furthermore, it is demonstrated that there is inherent variability in the synthesis of ETN making HPLC an unreliable method to determine the source of the synthesis materials. Elemental impurities were measured in seven solid ETN samples and their reaction quenches by inductively coupled plasma mass spectrometry (ICP-MS). No differences were discovered between the solid ETN samples, but there were trace metals found in the reaction quenches which were found to be identifiers of the source material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultra low noise materials and devices for cryogenic superconductors and quantum bits

Materials, products, methods of use and fabrication thereof are disclosed. The materials are particularly well suited for application in products such as superconducting devices and quantum computing, due to ability to avoid undesirable effects from inherent noise and decoherence. The materials are formed from select isotopes having zero nuclear spin into a single crystal-phase film or layer of thickness depending on the desired application of the resulting device. The film/layer may be suspended or disposed on a substrate. The isotopes may be enriched from naturally-occurring sources of isotopically mixed elemental material(s). The single crystal is preferably essentially devoid of structural defects such as grain boundaries, inclusions, impurities and lattice vacancies.

Pereverzev, Sergey↗
DOE OSTI2022

Graphene Nanopattern for Single-Crystal Film Growth, Defect Reduction and Layer Transfer

Thin film heterostructures are key building blocks for advanced electronic and optoelectronic devices. For this, direct heteroepitaxy has been pursued for decades, although it has been challenging to reduce crystal defects stemming from lattice mismatches and thermal mismatches between materials. The layer transfer method has been proposed as an alternative approach, wherein dissimilar materials are separately grown and then hetero-integrated. However, the applicability of layer transfer techniques is limited by several technical challenges, such as controllability, throughput, and damage to the substrate. Remote epitaxy, which is a recently developed method to produce single-crystalline membranes, is a promising approach but cannot be applied to elemental materials such as Si and Ge. In this work, we report graphene nanopattern as a universal template for the growth of single-crystal thin films that can be exfoliated as a freestanding form. This is realized by the chemical inertness of graphene, which allows selective nucleation at the exposed region, followed by lateral overgrowth onto graphene to form a planarized thin film. By employing graphene nanopattern, both group IV and III-V materials are utilized as the substrate as well as the epilayer. The epilayer can be exfoliated at the graphene interface because partially covered graphene effectively weakens the interface, which is corroborated by theoretical analyses of spalling theory. We reveal that graphene nanopattern not only works as a weakened interface for exfoliation, but also allows for dislocation reduction in heteroepitaxial films. This is because of the flexibility and the dangling-bond-free nature of graphene, which provides an additional path for strain relaxation. Therefore, these results represent a meaningful step toward production of high-quality single-crystal membranes that can be hetero-integrated.

Kim, Hyunseok↗
DOE OSTI2022

Graphene Nanopattern for Single-Crystal Film Growth, Defect Reduction and Layer Transfer

Thin film heterostructures are key building blocks for advanced electronic and optoelectronic devices. For this, direct heteroepitaxy has been pursued for decades, although it has been challenging to reduce crystal defects stemming from lattice mismatches and thermal mismatches between materials. The layer transfer method has been proposed as an alternative approach, wherein dissimilar materials are separately grown and then hetero-integrated. However, the applicability of layer transfer techniques is limited by several technical challenges, such as controllability, throughput, and damage to the substrate. Remote epitaxy, which is a recently developed method to produce single-crystalline membranes, is a promising approach but cannot be applied to elemental materials such as Si and Ge. In this work, we report graphene nanopattern as a universal template for the growth of single-crystal thin films that can be exfoliated as a freestanding form. This is realized by the chemical inertness of graphene, which allows selective nucleation at the exposed region, followed by lateral overgrowth onto graphene to form a planarized thin film. By employing graphene nanopattern, both group IV and III-V materials are utilized as the substrate as well as the epilayer. The epilayer can be exfoliated at the graphene interface because partially covered graphene effectively weakens the interface, which is corroborated by theoretical analyses of spalling theory. We reveal that graphene nanopattern not only works as a weakened interface for exfoliation, but also allows for dislocation reduction in heteroepitaxial films. This is because of the flexibility and the dangling-bond-free nature of graphene, which provides an additional path for strain relaxation. Therefore, these results represent a meaningful step toward production of high-quality single-crystal membranes that can be hetero-integrated.

Kim, Hyunseok↗
DOE OSTI2020

Tunable Second Harmonic Generation in Twisted Bilayer Graphene

Twisted stacking of van der Waals (vdW) materials introduces a new way in bandstructure engineering and has given rise to numerous extraordinary physical phenomena. Despite the absence of second harmonic generation (SHG) in non-gated monolayer graphene, artificially twisted bilayer graphene (tBLG) possesses more possible point-group symmetries including those with broken inversion-symmetry. Here, we report twist-angle-dependent SHG from tBLG, which is the first demonstration of an elemental material with intrinsically tunable nonlinearity. We show that depending on the twist angle, the susceptibility of the dominant chiral tensor component of tBLGs can vary from 0 to 28×10 4 pm 2 /V, which is at the same order of magnitude as on-resonance susceptibility of monolayer MoS 2 . These results shed light on the underlying symmetry of tBLG systems and electronic band-structure near van Hove singularities (vHs). More importantly, they introduce a new degree of freedom, the twisting, in creating efficient second-order nonlinear material form centrosymmetric constituents

36 MATERIALS SCIENCE↗
DOE OSTI2022

Gamma-ray spectrometry analysis methods for radioisotope dissolution and mixing for nuclear forensics applications

We report the production of surrogate nuclear explosive debris involves the dissolution of irradiated fissile material, elemental isolation, and recombination based on required fission product ratios. Gamma-ray spectrometry is used following each step to assess the radioactive fission product inventory. A high-purity germanium detector is used to measure each sample, and the detector efficiencies are determined prior to sample measurements. Through radiochemical techniques, elements are isolated and recombined into samples with specific fission product ratios. As a result, a matrix-based approach can account for imperfect chemical separations to calculate the proper mixture volumes to obtain intended volatile-to-refractory fission product ratios, or R-values.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Exploring the Interface of Skin-Layered Titanium Fibers for Electrochemical Water Splitting

Water electrolysis is the key to a decarbonized energy system, as it enables the conversion and storage of renewably generated intermittent electricity in the form of hydrogen. However, reliability challenges arising from titanium-based porous transport layers (PTLs) have hitherto restricted the deployment of next-generation water-splitting devices. Here, it is shown for the first time how PTLs can be adapted so that their interface remains well protected and resistant to corrosion across ˜4000 h under real electrolysis conditions. It is also demonstrated that the malfunctioning of unprotected PTLs is a result triggered by additional fatal degradation mechanisms over the anodic catalyst layer beyond the impacts expected from iridium oxide stability. Now, superior durability and efficiency in water electrolyzers can be achieved over extended periods of operation with less-expensive PTLs with proper protection, which can be explained by the detailed reconstruction of the interface between the different elements, materials, layers, and components presented in this work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A novel framework for elastoplastic behaviour of anisotropic solids

A general framework for developing nonlinear hyperelastic/plastic constitutive laws for anisotropic solids experiencing large strains and strain rates has been developed. The proposed framework does not rely on the “a priori” known strain energy function, but instead introduces a physical decomposition of the material element into seven physically independent stress bearing mechanisms, each of which has a constitutive law in terms of internal moments described by a scalar function of a single variable. Furthermore, the model has been encoded into a combined finite-discrete element method and tested against static geomechanical test data. The numerical validation experiments show the model can reproduce plastic anisotropic behavior in both biaxial and uniaxial loading of a geomaterial.

58 GEOSCIENCES↗
DOE OSTI2024

Kinetically controlled metal-elastomer nanophases for environmentally resilient stretchable electronics

Nanophase mixtures, leveraging the complementary strengths of each component, are vital for composites to overcome limitations posed by single elemental materials. Among these, metal-elastomer nanophases are particularly important, holding various practical applications for stretchable electronics. However, the methodology and understanding of nanophase mixing metals and elastomers are limited due to difficulties in blending caused by thermodynamic incompatibility. Here, we present a controlled method using kinetics to mix metal atoms with elastomeric chains on the nanoscale. We find that the chain migration flux and metal deposition rate are key factors, allowing the formation of reticular nanophases when kinetically in-phase. Moreover, we observe spontaneous structural evolution, resulting in gyrified structures akin to the human brain. The hybridized gyrified reticular nanophases exhibit strain-invariant metallic electrical conductivity up to 156% areal strain, unparalleled durability in organic solvents and aqueous environments with pH 2–13, and high mechanical robustness, a prerequisite for environmentally resilient devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Absolute magneto-optical measurement of magnetic field on a long pulse high electrical current driven solenoid

We describe a direct absolute magneto-optical approach to measuring the magnetic field driven by long pulse width (>5 ms) and high electrical current (∼kA) in a solenoidal coil. The magnetic field and electrical current are among the most important operating parameters in lightning research and electrical power distribution and are essential to understanding the properties of the radiation output in pulsed energy accelerators as well as other research platforms. However, accurately measuring these magnetic fields and electrical currents using conventional electrical diagnostics is difficult due to the strength of ionizing radiation and electromagnetic interference. Our approach uses a fiber coupled laser beam with a rare earth element material sensing crystal that is highly resistant to electromagnetic interference, allows for absolute measurement, and does not require an external calibration. Here, we focus on device theory, operating parameters, magneto-optical results from an experiment on a high current solenoid, and comparison with a calculation of the magnetic field and reference electrical current flowing downstream of the solenoid.

Owens, Israel [Sandia National Laboratories (SNL-N↗
DOE OSTI2020

Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC® wires

Although the high-temperature superconducting (HTS) REBa 2 Cu 3 O x (REBCO, RE-rare earth elements) material has a strong potential to enable dipole magnetic fields above 20 T in future circular particle colliders, the magnet and conductor technology needs to be developed. As part of an ongoing development to address this need, here we report on our CORC® canted cosθ magnet called C2 with a target dipole field of 3 T in a 65 mm aperture. The magnet was wound with 70 m of 3.8 mm diameter CORC® wire on machined metal mandrels. The wire had 30 commercial REBCO tapes from SuperPower Inc. each 2 mm wide with a 30 µm thick substrate. The magnet generated a peak dipole field of 2.91 T at 6.290 kA, 4.2 K. The magnet could be consistently driven into the flux-flow regime with reproducible voltage rise at an engineering current density between 400-550 A mm -2 , allowing reliable quench detection and magnet protection. The C2 magnet represents another successful step towards the development of high-field accelerator magnet and CORC® conductor technologies. The test results highlighted two development needs: continue improving the performance and flexibility of CORC® wires and develop the capability to identify locations of first onset of flux-flow voltage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗