Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron probe microanalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The Effects of Silicon and Niobium Concentration on the Solidification Behavior and Microstructure of Cast Monel Alloys

Cast Monel alloys are used in applications requiring a combination of good mechanical properties and excellent resistance to corrosion. Despite prevalent industrial use, relatively few studies have been conducted to investigate the relationships between composition, solidification behavior, and microstructure. Given that these alloys are used in the cast and welded conditions, these factors have a significant influence over the material properties. Here, in this work, microstructural characterization, electron probe microanalysis, X-ray diffraction, and differential scanning calorimetry were used to study how changes in Si and Nb concentrations affected the solidification path and microstructure of Monel alloys. It was found that increasing Nb concentration stabilized higher amounts of MC carbides and suppressed graphite formation during solidification. It was also found that the high nominal concentration and segregation of Si to the liquid led to the formation of Ni 31 Si 12 and other silicides via terminal eutectic reactions at the end of solidification. A pseudo-binary solidification diagram was constructed using experimental data and was applied to predict the mass fraction of solidified eutectic as a function of composition. The modeled microstructures were found to be in good agreement with experimentally measured phase fractions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Influence of Nominal Composition on the Microstructure, Tensile Properties, and Weldability of Cast Monel Alloys

Cast Monel alloys are used in many industrial applications that require a combination of good mechanical properties and excellent resistance to corrosion. Despite relative widespread use, there has been limited prior research investigating the fundamental composition–structure–property relationships. Here in this work, microstructural characterization, thermal analysis, electron probe microanalysis, tensile testing, and Varestraint testing were used to assess the effects of variations in nominal composition on the solidification path, microstructure, mechanical properties, and solidification cracking susceptibility of cast Monel alloys. It was found that Si segregation caused the formation of silicides at the end of solidification in grades containing at least 3 wt pct Si. While increases to Si content led to significant improvements in strengthening due to the precipitation of β 1 -Ni 3 Si, the silicide eutectics acted as crack nucleation sites during tensile loading which severely reduced ductility. The solidification cracking susceptibility of low-Si Monel alloys was found to be relatively low. However, increases to Si concentration and the onset of associated eutectic reactions increased the solidification temperature range and drastically reduced cracking resistance. Increases in the Cu and Mn concentrations were found to reduce the solubility limit of Si in austenite which promoted additional eutectic formation and exacerbated the reductions in ductility and/or weldability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning the melting point and phase stability of rare-earth oxides to facilitate their crystal growth from the melt

The challenge of growing rare-earth (RE) sesquioxide crystals can be overcome by tailoring their structural stability and melting point via composition engineering. This work contributes to the advancement of the field of crystal growth of high-entropy oxides. A compound with only small REs (Lu,Y,Ho,Yb,Er) 2 O 3 maintains a cubic C-type structure upon cooling from the melt, as observed via in-situ high-temperature neutron diffraction on aerodynamically levitated samples. On the other hand, a compound with a mixture of small and large REs (Lu,Y,Ho,Nd,La) 2 O 3 crystallizes as a mixture of a primary C-type phase with an unstable secondary phase. Crystals of compositions (Lu,Y,Ho,Nd,La) 2 O 3 and (Lu,Y,Gd,Nd,La) 2 O 3 were grown by the micro-pulling-down (mPD) method with a single monoclinic B-type phase, while a powder of (Lu,Y,Ho,Yb,Er) 2 O 3 did not melt at the maximum operating temperature of an iridium-rhenium crucible. The minimization of the melting point of the two grown crystals is attributed to the mismatch in cation sizes. The electron probe microanalysis reveals that the general element segregation behavior in the crystals depends on the composition.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Re-investigation of high-temperature phase equilibria in Fe-rich Sm–Fe–Ti alloys

Recently renewed attempts to develop high-performance rare-earth-lean permanent magnets based on the Sm(Fe,Ti) 12 compound have drawn attention to the limited knowledge about the high-temperature phase equilibria in the Sm–Fe–Ti system. Experimental investigation of equilibrated alloys with electron probe microanalysis, X-ray diffraction and thermomagnetic analysis revealed several inaccuracies in the currently accepted phase relations at 1000°C and allowed for a revision of the Fe-rich corner of the Sm–Fe–Ti phase diagram. The Sm(Fe,Ti) 12 and Sm 3 (Fe,Ti) 29 phases were found to have more extended Ti ranges of 5.1–9.7 at% and 2.8–6.9 at%, respectively. With increasing of the Ti content, the Curie temperature of the Sm(Fe,Ti) 12 remains nearly constant at 306–312°C, whereas that of the Sm 3 (Fe,Ti) 29 increases from 188°C to 207°C. The low-titanium Sm 3 (Fe,Ti) 29 phase equilibrates not only with the Sm(Fe,Ti) 12 and Sm2(Fe,Ti) 17 phases, but also with (α-Fe) solid solution. Newly demonstrated equilibrium between Sm 2 (Fe,Ti) 17 and TiFe 2 phases makes impossible the earlier reported equilibrium between the Sm 3 (Fe,Ti) 29 and Sm(Fe,Ti) 11 phases. Because of an invariant reaction at 1000 °C, the revised phase diagram also features a class II four-phase equilibrium Sm 3 (Fe,Ti) 29 + TiFe 2 + Sm(Fe,Ti) 12 + Sm 2 (Fe,Ti) 17 . Peritectic decomposition of the Sm(Fe,Ti) 11 phase, which occurs either at 1075°C or at 1087°C, was found to have among its products the Sm(Fe,Ti) 12 phase. Although no such equilibration was attempted, it must be possible to obtain above 1087°C a two-phase state composed of the Sm(Fe,Ti) 12 phase and a liquid – which is important for manufacturing of the Sm(Fe,Ti) 12 - based permanent magnets via the liquid-phase sintering.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase equilibria in iron-rich Sm–Fe–Ti and Sm–(Fe,Co)–Ti alloys at 1100–1200 °C

Iron-rich corners of ternary Sm–Fe–Ti phase diagram at 1100 °C and quasi-ternary Sm–Fe 0.8 Co 0.2 –Ti phase diagrams at 1100 and 1200 °C are constructed based on experimental investigation of equilibrated alloys with electron probe microanalysis, X-ray diffraction and thermomagnetic analysis. In addition, the upper boundaries of the temperature ranges of Sm(Fe,[Co,]Ti) 12 and Sm 3 (Fe,[Co,]Ti) 29 phases are determined with differential thermal analysis to update earlier rough estimates. The existence of a high-temperature phase of the Th 2 Ni 17 type, originally reported by Ivanova et al. [J. Alloys Compd. 224 (1995) 29], is confirmed. In the Sm–Fe 0.8 Co 0.2 –Ti system, the composition and equilibria of this hexagonal phase are established for 1200 °C; it is Sm-depleted (≈9.8 at.% Sm) compared to the 2:17 stoichiometry and it coexists with the rhombohedral 2:17 phase. The magnetic anisotropy of the cobalt-substituted Th 2 Ni 17 -type phase is planar, with the easy magnetization direction parallel to [100]. Equilibrium between a Sm-rich liquid phase and the 1:12 phase, which is important for the development of new high-performance permanent magnets, is absent up to 1000 °C, but does exist at 1100 °C (for the 1:12 phase with at least 8.7–8.9 at.% Ti) and at 1200 °C (for the 1:12 phase with as little as 7.4 at.% Ti). The development of magnets may be complicated, however, by an observed tendency of the high-temperature liquid to solidify into ferromagnetic phases including the Th 2 Ni 17 -type phase. The Curie temperatures of the α-(Fe,Ti), Sm(Fe,Ti) 12 , Sm 3 (Fe,Ti) 29 and rhombohedral Sm 2 (Fe,Ti) 17 phases are not only increased by the partial Co substitution for Fe, but their dependence on the Ti concentration is changed by this Co substitution from positive (or, for the 1:12 phase, zero) to negative values.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Out-of-pile and postirradiated examination of lanthanide and lanthanide-palladium interactions for metallic fuel

Palladium is being investigated as a fuel additive to bind with and potentially immobilize lanthanide fission products. A primary cause of fuel-cladding chemical interaction (FCCI) is the lanthanide fission products migrating to the fuel periphery and interacting with the cladding. This interaction will lead to wastage of the cladding and eventually to a cladding breach. Palladium has previously been identified as a promising additive used to prevent or decrease FCCI by reacting with the lanthanide fission products. In the current study, an alloy cast from the four highest abundant lanthanides found in irradiated metallic fuel, Nd, Ce, Pr, and La, with and without Pd, has been characterized using neutron diffraction, scanning electron microscopy, and electron probe microanalysis. In the lanthanide-Pd intermetallic compounds, all of the constituent compounds, i.e. Nd-Pd, Ce-Pd, La-Pd and Pr-Pd are known. There is very good agreement, both structurally and compositionally, between the out-of-pile lanthanide alloy and lanthanide fission products characterized in irradiated fuels. In both cases, the lanthanide elements form a solid solution in a hexagonal crystal structure. The out-of-pile lanthanide alloy follows Vegard's Law, with the measured and calculated (weighted average of constituents) lattice parameters being within 1% for both the a and c parameters. Pd bonds with the lanthanides (Ln) forming the phases LnPd and Ln7Pd3. The results indicate the properties of lanthanide compounds in irradiated metallic fuel can be reliably simulated in out-of-pile experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Evaluating the effects of structural disorder on the magnetic properties of Nd 2 Zr 2 O 7

Motivated by the variation in reported lattice parameters of floating-zone-grown Nd 2 Zr 2 O 7 crystals, we have performed a detailed study of the relationship between synthesis environment, structural disorder, and magnetic properties. Using a combination of polycrystalline standards, electron-probe microanalysis, and scattering techniques, we show that crystals grown under atmospheric conditions have a reduced lattice parameter relative to pristine polycrystalline powders due to occupation of the Nd site by excess Zr (i.e., negative stuffing). In contrast, crystals grown under high-pressure Ar are nearly stoichiometric with an average lattice parameter approaching the polycrystalline value. While minimal disorder of the oxygen sublattices is observed on the scale of the average structure, neutron pair-distribution function analysis indicates a highly local disorder of the oxygen coordination, which is only weakly dependent on growth environment. Most importantly, our magnetization, heat capacity, and single-crystal neutron scattering data show that the magnetic properties of crystals grown under high-pressure Ar match closely with those of stoichiometric powders. Neutron scattering measurements reveal that the signature of magnetic moment fragmentation—the coexistence of all-in-all-out (AIAO) magnetic Bragg peaks and diffuse pinch-point scattering due to spin-ice correlations–persists in these nearly stoichiometric crystals. However, in addition to an increased AIAO transition temperature, the diffuse signal is seemingly stabilized and remains nearly unchanged upon warming to 800 mK. This behavior indicates that both the AIAO magnetic order and spin-ice correlations are sensitive to deviations of the Nd stoichiometry.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chromium and Vanadium Incorporation in Sulfate-Containing Sodium Aluminoborosilicate Glass

In the composition space for Hanford low-activity nuclear waste glass, the waste loading of some formulations is limited by poor incorporation of sulfate. In particular, certain elements identified in previous studies tend to raise or lower sulfate solubility in borosilicate glass. The aim of the current study is to understand how vanadium and chromium each affect a sulfate-containing sodium aluminoborosilicate glass structure. Glass transition temperature, mass density, visible absorption, and Raman scattering were measured to investigate changes in the glass structure. Both Cr6+ (CrO42-) and Cr3+ were found in the chromium-containing glasses while vanadium primarily existed in the 5+ oxidation state in the vanadium-containing glasses. Electron probe microanalysis determined elemental compositions to assess retention of components. Increasing Cr2O3 caused saturation of Cr concentration within the glass and formation of crystalline eskolaite (Cr2O3). On the other hand, all the targeted V was incorporated into the glass. A fraction of batched S was not incorporated in any glass, presumably due to volatilization during melting. Apparently, the details of incorporation of Cr, and to an extent V, are different depending on whether sulfur is added as in this study or in oversaturated conditions as described in the literature, where Cr partitions to a sulfate-containing salt phase.

Borosilicate glass, Waste Glass, vanadium chemistr↗
DOE OSTI2023

Finchite, Sr(UO 2 ) 2 (V 2 O 8 )·5H 2 O, a new uranyl sorovanadate with the francevillite anion topology

Finchite (IMA2017-052), Sr(UO 2 ) 2 (V 2 O 8 )·5H 2 O, is the first uranium mineral known to contain essential Sr. The new mineral occurs as yellow-green blades up to ~10 µm in length in surface outcrops of the calcrete-type uranium deposit at Sulfur Springs Draw, Martin County, Texas, U.S.A. Crystals of finchite were subsequently discovered underground in the Pandora mine, La Sal, San Juan County, Utah, U.S.A., as diamond-shaped golden-yellow crystals reaching up to 1 mm. In this work, the crystal structure of finchite from both localities was determined using single-crystal X-ray diffraction and is orthorhombic, Pcan, with a = 10.363(6) Å, b = 8.498(5) Å, c = 16.250(9) Å, V = 1431.0(13) Å 3 , Z = 4 (R 1 = 0.0555) from Sulfur Springs Draw; and a = 10.3898(16), b = 8.5326(14), c = 16.3765(3) Å, V = 1451.8(4) Å 3 , Z = 4 (R 1 = 0.0600) from the Pandora mine. Electron-probe microanalysis provided the empirical formula (Sr 0.88 K 0.17 Ca 0.10 Mg 0.07 Al 0.03 Fe 0.02 ) Σ1.20 (UO 2 ) 2 (V 2.08 O 8 )·5H 2 O for crystals from Sulfur Springs Draw, and (Sr 0.50 Ca 0.28 Ba 0.22 K 0.05 ) Σ0.94 (U 0.99 O 2 ) 2 (V 2.01 O 8 )·5H 2 O for crystals from the Pandora mine, based on 17 O atoms per formula unit. The structure of finchite contains uranyl vanadate sheets based upon the francevillite topology. Finchite is a possible immobilization species for both uranium and the dangerous radionuclide 90 Sr because of the relative insolubility of uranyl vanadate minerals in water.

58 GEOSCIENCES↗
DOE OSTI2021

Low-Activity Waste Glass Standards Preparation and Characterization for Calibration of Analytical Instruments

A matrix of seven low-activity waste (LAW) glasses was fabricated and characterized to be used by the Hanford Waste Treatment and Immobilization Plant (WTP) as analytical instrument calibration and matrix interference standards when measuring LAW glass compositions. The matrix of glasses was designed to represent the range of LAW glass compositions that will be generated by the WTP. Samples from each of the seven glasses were measured with electron probe microanalysis (EPMA), ion chromatography (IC), and bulk inductively coupled plasma mass spectroscopy (ICP-MS) to determine the variability and accuracy across batches and within individually poured glass bar samples. High relative percent differences and standard deviations were calculated for components with low concentrations due to instrument detection limits. IC and ICP-MS percent differences and standard deviations were higher at low component concentrations. Otherwise, variability in measured compositions from IC and ICP-MS was generally lower than measurements from EPMA, with the exclusion of Cl, F, Si, and B. Overall, the two methods proved comparable and complementary. From EPMA, IC, and ICP-MS data, volatile elements were underrepresented compared to batched compositions, which suggested loss of these elements during melting. EPMA data was statistically analyzed to evaluate homogeneity within single bars and whole compositions for each of the seven glasses. Most of the variability within glass compositions occurred at the bar-to-bar level; however, no clear systematic trends were observed. Based on these analyses, when using these glasses as reference material, it is recommended that the overall mean and variance of each composition be used for performing instrument calibrations and analytical corrections.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Trace Element Control in Master Alloys and Impact of Feedstock Purity on a Ta-containing Steel during Electroslag Remelting

Advanced materials design often leads to new complex compositions that can bring challenges to manufacturing processes. Melt processing of a novel alloy with a tight chemistry range revealed a 25% Ta loss after manufacturing. Vacuum induction melting (VIM) and electroslag remelting (ESR) were performed using industry practices at a laboratory scale and the loss occurred from the VIM electrode to the ESR ingot. Several tools were used for characterization, including combustion analysis, scanning electron microscopy, and electron probe microanalysis for observation of the precipitate and inclusion phases. Additionally, computational modeling of the ESR process was performed to predict macrosegregation and inclusion travel. It was found that a significant amount of Ta2O5 inclusions formed during VIM and were transferred to the slag during ESR. This led to a 95% decrease in density of inclusions explaining to Ta loss. Pathways to better control advanced alloy chemistries during melt processing will be discussed.

Detrois, Martin↗
DOE OSTI2023

Impact of Boron-Containing Lubricant Additive on Three-Way Catalyst Reactivity and Physicochemical Properties

Boron-containing compounds are one of the lubricant additive options due to their suitable properties for additives and have been used as commercial lubricant additives. In the present study, the impact of a boron-containing lubricant oil additive, AR9100 (BR), on Pd/Rh-based three-way catalyst (TWC) performance is investigated, and the results are compared with the baseline no-additive (NA) case and the industry standard zinc dialkyl-dithiophosphate (ZDDP) results. Accelerated engine aging is performed using a genset to expose the catalysts to lubricant additives at high temperatures. All aged TWC samples are investigated for reactivity in a bench-flow reactor and characterized using a variety of analytical techniques. Compared with the no-additive case, the temperatures of 90% conversion (T 90 ) of NO, CO, C 3 H 6 , and C 3 H 8 for the ZDDP-aged TWC sample increased by 34, 30, 37, and 48 °C. However, the T 90 of all gas species for the BR-aged TWC sample are similar to the NA-aged TWC sample. Additionally, a significant decrease in water–gas shift reactivity and oxygen storage capacity is observed in the ZDDP-aged sample, but not in the BR-aged sample. Inductively coupled plasma-optical emission spectrometry (ICP-OES) analysis and electron probe microanalysis (EPMA) maps of accelerated engine aging samples show the presence of phosphorus and boron in ZDDP- and BR-aged TWC samples, respectively. However, no boron-related peaks are observed in the X-ray diffraction (XRD) pattern of the BR-aged TWC sample, which may exist in the form of an amorphous phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Processing, Microstructure, and Properties of Bimetallic Steel-Ni Alloy Powder HIP

This work explores technical feasibility in hot isostatic pressing (HIP) manufacturing of an integral bimetallic component using steel and Ni alloy powder for supercritical carbon dioxide (sCO2) turbomachinery. Lab-scale bimetallic HIP specimens using HAYNES® 282® and SS316L or SS415 powder are investigated in powder configuration, heat treatment, microstructure, and tensile properties up to 400 °C. Interdiffusion profiles at dissimilar alloy interfaces caused by HIP cycle is predicted by DICTRA simulations and validated by electron probe microanalysis (EPMA). The interdiffusion distance of most elements is around 100 μm, while C and N have a higher interdiffusion distance. Dense distribution of Ti-rich carbonitrides and alumina particles are found to decorate prior particle boundaries near joining interface on the 282 side, affecting tensile strength across interface as well as tensile failure location. A higher amount of excessive carbonitride formation near interface is observed in SS316L/282 than in SS415/282, which is consistent with the predicted greater degree of interdiffusion effect in SS316L/282. Typical HAYNES® 282® heat treatment condition is applicable to 282/SS316L and 282/SS415 combinations, resulting in a higher strength than cast CF8M and CA6NM. A pilot-scale bimetallic SS415/282 pipe is then demonstrated to show the promise of scaleup.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Crystal Structure of an Anisotropic Pyrope Garnet That Contains Two Cubic Phases

The crystal structure of two different samples of pyrope garnet, ideally Mg 3 Al 2 Si 3 O 12 , from South Africa was refined using the Rietveld method, space group Ia3¯d, and monochromatic synchrotron high-resolution powder X-ray diffraction (HRPXRD) data. Sample 1 from Wesselton Mine is a single cubic phase and is optically isotropic. Electron-probe microanalysis (EPMA) provided an average composition {Mg 2.30 Fe 2+ 0.26 Ca 0.42 Mn 2+ 0.02 } Σ3 [Al 1.53 Fe 3+ 0.06 Cr 3+ 0.40 Ti 4+ 0.01 Fe 2+ 0.01 ] Σ2 Si 3 O 12 , which contains a significant amount of Cr cations. The unit-cell parameter (Å) and bond distances (Å) are a = 11.56197(1) Å, average = 2.2985, Al-O = 1.9101(4), and Si-O = 1.6343(3) Å. Sample 2 from De Beers Diamond Mine has an average composition {Mg 2.33 Fe 2+ 0.33 Ca 0.33 Mn 2+ 0.01 } Σ3 [Al 1.73 Fe 3+ 0.12 Cr 3+ 0.06 Ti 4+ 0.05 Fe 2+ 0.05 ] Σ2 Si 3 O 12 and is a fine-scale intergrowth of two cubic phases. The weight percentage, unit-cell parameter (Å), and bond distances (Å) for phase 2a are 62.2(1)%, a = 11.56185(1) Å, average = 2.3006, Al-O = 1.9080(4), Si-O = 1.6334(4) Å. The corresponding values for phase 2b are 37.8(1)%, a = 11.53896(1) Å, average = 2.2954, Al-O = 1.9020(6), Si-O = 1.6334(6) Å. The two cubic phases in sample 2 cause the crystal to be optically anisotropic because of strain induce birefringence. The unit-cell parameter and bond distances for sample 1 are similar to those in phase 2a.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Shinkolobweite, from the Shinkolobwe Mine, Democratic Republic of Congo: A New Mineral Containing Uranium in the Rare Pentavalent Oxidation State

ABSTRACT Shinkolobweite, Pb1.333[U5+O(OH)(UO2)5O4.67(OH)5.33](H2O)5, is a new lead uranyl oxide-hydroxide hydrate mineral containing hexavalent and pentavalent uranium from the Shinkolobwe mine, Democratic Republic of Congo. Crystals of shinkolobweite are dark reddish-brown prisms up to 0.5 mm in length, occurring on a matrix of massive uraninite associated with fourmarierite, rutherfordine, soddyite, and sklodowskite. Crystals are translucent with subadamantine luster and light bronze-yellow streak, are flattened on {010}, are elongated on [001], and exhibit the forms {100}, {010}, {101}, and . The mineral is non-fluorescent under both longwave and shortwave ultraviolet illumination. It has a Mohs hardness of ∼2 and exhibits brittle tenacity with perfect cleavage on {010}, imperfect cleavage on {100}, and even fracture. The calculated density is 5.853 g/cm3 based on the empirical formula. Electron probe microanalysis provided the empirical formula Pb1.290U6+4.876U5+1.166O27H16.633 based on 27 O apfu and U5+:U6+ determined by X-ray photoelectron spectroscopy. Shinkolobweite is orthorhombic, superspace group Pnnm(0b0)000, a = 14.4808(4), b = 7.0681(8), c = 11.9423(3) Å, V = 1222.32(15) Å3, modulation wave vector [0 1/3 0], and Z = 2. The structure was refined from 8959 reflections to a final R1 = 0.0736 for all reflections. Uranyl oxide-hydroxide sheets in shinkolobweite adopt the β-U3O8 topology and possess (3 + 1) commensurately modulated ordering that results from the long-range ordering of U5+ and U6+ in the sheet, as well as the position and occupancy of interlayer Pb2+ cations. Observations of a topological transition between α-U3O8 and β-U3O8 type sheets in shinkolobweite supplements our understanding of U5+ mineral oxidation and stability.

Mineralogy↗
DOE OSTI2021

Invited Review Paper in Commemoration of Over 50 Years of Oxidation of Metals: Addressing the Role of Water Vapor on Long-Term Stainless Steel Oxidation Behavior

In the past 20 years, it has become clear that the long-term exposure of chromia-forming austenitic stainless steels to air containing ~ 10 vol% water vapor at 650–800 °C significantly increases the Cr consumption rate compared to laboratory air. However, a similar acceleration does not occur in 100% steam because O 2 is not available to form volatile CrO 2 (OH) 2 . As the research has shown, this accelerated Cr loss is particularly important for thin-walled components like gas turbine recuperators. Typically, conventional austenitic stainless steels exhibit accelerated attack (i.e., rapid formation of Fe-rich oxide nodules), while higher alloyed steels resist this type of degradation until the alloy surface becomes Cr depleted. The development of strategies and solutions for this issue are reviewed. Model Fe–Cr–Ni alloys have been used to study composition effects on this behavior. For example, increasing the Mn content up to ~ 4 wt% was not beneficial, but increasing the Ni content improved oxidation resistance in this environment. However, at 650–700 °C even highly alloyed steels showed surface Cr depletion at alloy grain boundaries resulting in Fe-rich oxide nodule formation. The path forward for this issue will require more refined mechanistic understanding and increased used of modeling to develop better application-specific lifetime models to identify the most cost-effective alloy solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Single-component-at-a-time variation study for glass-ceramic waste forms

Here, a 51-sample composition variation study was performed on glass-ceramic waste forms for a raffinate waste stream from aqueous reprocessing of used nuclear fuel containing high fractions of Mo, alkalis, alkaline earths (AEs), and rare earths (REs). The study was designed with a single-component-at-a-time variation approach off a centroid composition. The components that were varied included Al, B, Ca, Li, Mo, Na, REs, Si, Zr, and Others (containing minor components). Data analysis included crystallization curves, microstructure, and phase compositions. A number of components (i.e., Li 2 O, B 2 O 3 , REO x , MoO 3 , Na 2 O, and ZrO 2 ) significantly impacted the concentration and chemistry of phases, especially the primary phases of oxyapatite [i.e., Ca 2 RE 8 (SiO 4 ) 6 O 2 ] and powellite (i.e., AEMoO 4 ), precipitated in the slow-cool heat-treated waste forms; minor phases included cerianite [i.e., Ce x Zr (1-x) O 2 ], Ba-molybdate [i.e., Ba(Gd 0.67 Mo 0.33 O 3 ], noble metals, pollucite (i.e., CsAlSiO 4 ), and RE-borosilicate (i.e., RE 3 BSi 2 O 10 ).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗