Absorption tables for electron probe micro- analysis
Absorption tables for electron probe microanalysis
MICROANALYSIS↗
SEARCH · Engineering Papers
Results for “electron probe microanalysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Metallic particles in the glassy constituents of three lunar highland samples 65315, 67435 and 78235
Electron probe microanalysis and analytical electron microscopy techniques were employed to obtain structural and chemical analyses of metal particles in the size range of less than 1000 A and greater than 5 microns from the glassy constituents of 3 lunar highland samples 65315, 67435 and 78235. Most of the micron size metal particles in the glass coatings of the three samples are of meteoritic Co-Ni content. The Ni content of submicron metal often differs significantly from the micron size metal in the same glass. This difference can be explained by one of 3 reasons: (a) the presence of metal of different sizes and Ni contents in the rock prior to the shock event, (b) the presence of metal particles in the lunar soil of meteoritic or variable Ni content which were incorporated when the glass formed and (c) the production of submicroscopic Fe metal from the reduction of Fe(+2) in the shock produced melt.
Mehta, S.↗
Thin film electron probe-electron microscope microanalysis techniques in biomaterials studies
Electron microscope-thin film microprobe techniques in biomaterial studies of chemical segregation, species diffusion and small particle analysis
Ansell, G. S.↗
Aubrite basalt vitrophyres: High sulfur silicate melts and a snapshot of aubrite formation
Two aubrite basalt vitrophyre clasts have been found within AMNH thin sections from the Parsa EH3 chondrite and the Khor Temiki aubrite. Polished sections of the Parsa Aubrite Inclusion (PAI) and the Khor Temiki Inclusion (KTI) were studied by optical, electron probe microanalysis (EPMA), and scanning electron microscopy (SEM) techniques with broad-beam and low absorbed EPMA currents used to minimize glass volatile loss. Some data have previously been reported for PAI and KTI may possibly correlate to a previously reported inclusion in Khor Tiimiki. In polished sections, PAI and KTI are approximately equal 4 mm in diameter and contain a large volume of glass. The clasts have similar textural characteristics and are akin to lunar vitrophyre textures. The glasses have high alkali rhyodacitic compositions Al-though PAI is peraluminous, KTI is significantly peralkaline. Additionally, the glasses have elevated sulfur concentrations that are extremely high by geochemical standards. SEM examination for beam overlap of microscopic CaS, FeS, and (Mg, Mn, Fe) S inclusions showed no such contamination. Furthermore, homogeneity of glass S content and low FeO contents help rule out contamination. Materials research data show that under reducing conditions alumino-silicate melts can dissolve up to several weight percent sulfur in the absence of Fe. The high S and alkali contents, the lack of associated high shock features, and the rationalized phase equilibria suggest that PAI and KTI are igneous melting products of an E-chondrite-like source material. Although large-scale impact melting cannot totally be ruled out, the above observations eliminate the possibility of in-situ shock melting.
Fogel, R. A.↗
Distribution of germanium in the metallic phases of some iron meteorites.
Germanium distribution in metallic phases of various iron meteorites by electron probe microanalysis
GERMANIUM↗
Carbon Tracers of Aqueous Processes: Isotopic Analysis of Cr Carbonate Grains With Implications for Bennu Samples
Carbonate grains in carbonaceous chondrites record aqueous alteration events on the asteroidal parent bodies, including evidence for episodic alteration, timing of alteration, and time and temperature evolution of volatiles. Spectral features in the 3.4 μm region at asteroid Bennu have been interpreted as coming from carbonate minerals. Coordinated analysis of carbonate grains will be a valuable tool for analysis of Bennu samples, and related analysis of analog materials provides important context for understanding aqueous alteration of carbonaceous asteroids more broadly. To that end, our team is analyzing carbonates in Bennu analog materials, using Raman spectroscopy to identify carbonates and assess the maturity of related organic materials, vacuum reflectance spectroscopy from the ultraviolet through thermal infrared range to constrain contributions from carbonates and organics, X-ray microtomography and electron probe microanalysis (EPMA) to assess the distribution of void space, transmission electron microscopy to characterize space weathering effects, and EPMA and secondary ion mass spectrometry (SIMS) to measure composition and isotopic ratios. Here, we describe in situ analysis of carbon and oxygen isotopes from carbonates in Grosvenor Mountains (GRO) 95577.
K E Miller↗
Meteoritic zircon.
Zircon identified in Vaca Muerta meteoritic specimens by electron probe microanalysis
METEORITIC COMPOSITION↗
Electron microprobe analysis program for biological specimens: BIOMAP
BIOMAP is a Univac 1108 compatible program which facilitates the electron probe microanalysis of biological specimens. Input data are X-ray intensity data from biological samples, the X-ray intensity and composition data from a standard sample and the electron probe operating parameters. Outputs are estimates of the weight percentages of the analyzed elements, the distribution of these estimates for sets of red blood cells and the probabilities for correlation between elemental concentrations. An optional feature statistically estimates the X-ray intensity and residual background of a principal standard relative to a series of standards.
Edwards, B. F.↗
Diffusion of chromium and aluminum in Ni-20Cr and TDNiCr /Ni-20Cr-2ThO2/.
Diffusion coefficients have been measured for Cr51 in fine- and coarse-grained TDNiCr (Ni-20Cr-2ThO2) and in fine-grained Ni-20Cr in the temperature range from 1038 to 1200 C. Selective diffusivities have also been determined for specimens of these alloys which were aluminized to give an initial surface concentration of 5.8 wt % Al. Finally, diffusion coefficients for interdiffusion of aluminum in TDNiCr and Ni-20Cr have been obtained from electron probe microanalysis of the aluminized specimens. For a given grain size and temperature there is no difference in diffusivities for chromium diffusion in TDNiCr or Ni-20Cr. Diffusion coefficients increase with decreasing grain size for both alloys. Comparison of aluminum diffusion data obtained from electron microprobe profiles with radiotracer chromium diffusivities suggests that aluminum diffuses approximately three times faster than chromium in TDNiCr and Ni-20Cr.
Seltzer, M. S.↗
Microstructural stability of wrought, laser and electron beam glazed NARloy-Z alloy at elevated temperatures
Microstructure of wrought, laser, and electron-beam glazed NARloy-Z(Cu-3 wt.% Ag-0.5 wt.% Zr) was investigated for thermal stability at elevated temperatures (539 to 760 C (1,100 to 1,400 F)) up to 94 h. Optical and scanning electron microscopy and electron probe microanalysis were employed for studying microstructural evolution and kinetics of precipitation. Grain boundary precipitation and precipitate free zones (PFZ's) were observed in the wrought alloy after exposing to temperatures above 605 C (1,120 F). The fine-grained microstructure observed in the laser and electron-beam glazed NARloy-Z was much more stable at elevated temperatures. Microstructural changes correlated well with hardness measurements.
Singh, J.↗
Adrianite, Ca12(Al4Mg3Si7)O32Cl6, a New Cl-rich Silicate Mineral From the Allende Meteorite: An Alteration Phase in a Ca-Al-rich Inclusion
Adrianite (IMA 2014-028), Ca12(Al4Mg3Si7)O32Cl6, is a new Cl-rich silicate mineral and the Si,Mg analog of wadalite. It occurs with monticellite, grossular, wadalite, and hutcheonite in altered areas along some veins between primary melilite, spinel, and Ti,Al-diopside in a Type B1 FUN (Fractionation and Unidentified Nuclear effects) Ca-Al-rich inclusion (CAI), Egg-3, from the Allende CV3 carbona-ceous chondrite. The mean chemical composition of type adrianite by electron probe microanalysis is (wt%) CaO 41.5, SiO2 27.5, Al2O3 12.4, MgO 7.3, Na2O 0.41, Cl 13.0, O=Cl –2.94, total 99.2, giving rise to an empirical formula of (Ca11.69Na0.21)(Al3.85Mg2.88Si7.23)O32Cl5.80. The end-member formula is Ca12(Mg5Si9)O32Cl6. Adrianite has the I43d wadalite structure with a = 11.981 Å, V = 1719.8 Å3, and Z = 2, as revealed by electron backscatter diffraction. The calculated density using the measured composition is 3.03 g/cm3. Adrianite is a new secondary mineral in Allende, apparently formed by alkali-halogen metasomatic alteration of primary CAI minerals such as melilite, anorthite, perovskite, and Ti,Al-diopside on the CV chondrite parent asteroid. Formation of secondary Cl-rich minerals sodalite, adrianite, and wadalite during metasomatic alteration of the Allende CAIs suggests that the metasomatic fluids had Cl-rich compositions. The mineral name is in honor of Adrian J. Brearley, mineralogist at the University of New Mexico, U.S.A., in recognition of his many contributions to the understanding of secondary mineralization in chondritic meteorites.
Chi Ma↗
Adrianite, Ca12(Al4Mg3Si7)O32Cl6, a New Cl-rich Silicate Mineral from the Allende Meteorite: An Alteration Phase in a Ca-Al-rich Inclusion
Adrianite (IMA 2014-028), Ca12 (Al4Mg3Si7)O32Cl6, is a new Cl-rich silicate mineral and the Si, Mg analog of wadalite. It occurs with monticellite, grossular, wadalite, and hutcheonite in altered areas along some veins between primary melilite, spinel, and Ti, Al-diopside in a Type B1 FUN (Fractionation and Unidentified Nuclear effects) Ca-Al-rich inclusion (CAI), Egg-3, from the Allende CV3 carbonaceous chondrite. The mean chemical composition of type adrianite by electron probe microanalysis is (wt%) CaO 41.5, SiO2 27.5, Al2O3 12.4, MgO 7.3, Na2O 0.41, Cl 13.0, O=Cl –2.94, total 99.2, giving rise to an empirical formula of (Ca11.69Na0.21) (Al3.85Mg2.88Si7.23) O32Cl5.80. The end-member formula is Ca12 (Mg5Si9) O32Cl6. Adrianite has the I43d wadalite structure with a = 11.981 Å, V = 1719.8 Å3, and Z = 2, as revealed by electron backscatter diffraction. The calculated density using the measured composition is 3.03 g/cm3. Adrianite is a new secondary mineral in Allende, apparently formed by alkali-halogen metasomatic alteration of primary CAI minerals such as melilite, anorthite, perovskite, and Ti,Al-diopside on the CV chondrite parent asteroid. Formation of secondary Cl-rich minerals sodalite, adrianite, and wadalite during metasomatic alteration of the Allende CAIs suggests that the metasomatic fluids had Cl-rich compositions. The mineral name is in honor of Adrian J. Brearley, mineralogist at the University of New Mexico, U.S.A., in recognition of his many contributions to the understanding of secondary mineralization in chondritic meteorites.
Adrianite↗
Machiite, Al2Ti3O9, A New Oxide Mineral from the Murchison Carbonaceous Chondrite: A New Ultra-refractory Phase From the Solar Nebula
Machiite (IMA 2016-067), Al2Ti3O9, is a new mineral that occurs as a single euhedral crystal, 4.4 mm in size, in contact with an euhedral corundum grain, 12 mm in size, in a matrix of the Murchison CM2 carbonaceous chondrite. The mean chemical composition of holotype machiite by electron probe microanalysis is (wt%) TiO2 59.75, Al2O3 15.97, Sc2O3 10.29, ZrO2 9.18, Y2O3 2.86, FeO 1.09, CaO 0.44, SiO2 0.20, MgO 0.10, total 99.87, giving rise to an empirical formula (based on 9 oxygen atoms pfu) of (Al1.17Sc0.56Y0.10Ti4+0.08Fe0.06Ca0.03Mg0.01)(Ti4+2.71Zr0.28Si0.01)O9. The general formula is (Al,Sc)2(Ti4+,Zr)3O9. The end-member formula is Al2Ti3O9. Machiite has the C2/c schreyerite-type structure with a = 17.10 Å, b = 5.03 Å, c = 7.06 Å, b = 107°, V = 581 Å3, and Z = 4, as revealed by electron backscatter diffraction. The calculated density using the measured composition is 4.27 g/cm3. The machiite crystal is highly 16O-depleted relative to the coexisting corundum grain (D17O = –0.2 ± 2.4‰ and –24.1 ± 2.6‰, respectively; where D17O = d17O – 0.52 × d18O). Machiite is a new member of the schreyerite (V2Ti3O9) group and a new Sc,Zr-rich ultrarefractory phase formed in the solar nebula, either by gas-solid condensation or as a result of crystallization from a Ca,Al-rich melt having solar-like oxygen isotopic composition (D17O ~ –25‰) under high-temperature (~1400–1500 °C) and low-pressure (~10-4–10-5 bar) conditions in the CAI-forming region near the protosun. The currently observed disequilibrium oxygen isotopic composition between machiite and corundum may indicate that machiite subsequently experienced oxygen isotopic exchange with a planetary-like 16O-poor gaseous reservoir either in the solar nebula or on the CM chondrite parent body. The name machiite is in honor of Chi Ma, mineralogist at California Institute of Technology, for his contributions to meteorite mineralogy and discovery of many new minerals representing extreme conditions of formation.
Alexander N Krot↗
Machiite, Al2Ti3O9, a New Oxide Mineral from the Murchison Carbonaceous Chondrite: A New Ultra-refractory Phase from the Solar Nebula
Machiite (IMA 2016-067), Al2Ti3O9, is a new mineral that occurs as a single euhedral crystal, 4.4 mm in size, in contact with an euhedral corundum grain, 12 mm in size, in a matrix of the Murchison CM2 carbonaceous chondrite. The mean chemical composition of holotype machiite by electron probe microanalysis is (wt%) TiO2 59.75, Al2O3 15.97, Sc2O3 10.29, ZrO2 9.18, Y2O3 2.86, FeO 1.09, CaO 0.44, SiO2 0.20, MgO 0.10, total 99.87, giving rise to an empirical formula (based on 9 oxygen atoms pfu) of (Al1.17Sc0.56Y0.10Ti4+0.08Fe0.06Ca0.03Mg0.01)(Ti4+2.71Zr0.28Si0.01)O9. The general formula is (Al,Sc)2(Ti4+,Zr)3O9. The end-member formula is Al2Ti3O9. Machiite has the C2/c schreyerite-type structure with a = 17.10 Å, b = 5.03 Å, c = 7.06 Å, b = 107°, V = 581 Å3, and Z = 4, as revealed by electron backscatter diffraction. The calculated density using the measured composition is 4.27 g/cm3. The machiite crystal is highly 16O-depleted relative to the coexisting corundum grain (D17O = –0.2 ±2.4‰ and –24.1 ± 2.6‰, respectively; where D17O = d17O – 0.52 ×d18O). Machiite is a new member of the schreyerite (V2Ti3O9) group and a new Sc,Zr-rich ultrarefractory phase formed in the solar nebula, either by gas-solid condensation or as a result of crystallization from a Ca, Al-rich melt having solar-like oxygen isotopic composition (D17O ~ –25‰) under high-temperature (~1400–1500 °C) and low-pressure (~10-4–10-5 bar) conditions in the CAI-forming region near the protosun. The currently observed disequilibrium oxygen isotopic composition between machiite and corundum may indicate that machiite subsequently experienced oxygen isotopic exchange with a planetary-like 16O-poor gaseous reservoir either in the solar nebula or on the CM chondrite parent body. The name machiite is in honor of Chi Ma, mineralogist at California Institute of Technology, for his contributions to meteorite mineralogy and discovery of many new minerals representing extreme conditions of formation.
Machiite↗
X-ray Mapping of Terrestrial and Extraterrestrial Materials Using the Electron Microprobe
Lunar samples returned from the Apollo program motivated development of the Bence-Albee algorithm for the rapid and accurate analysis of lunar materials, and established interlaboratory comparability through its common use. In the analysis of mineral and rock fragments it became necessary to combine micro- and macroscopic analysis by coupling electron-probe microanalysis (EPMA) with automated stage point counting. A coarse grid that included several thousand points was used, and initially wavelength-dispersive (WDS) and later energydispersive (EDS) data were acquired at discrete stage points using approx. 5 sec count times. A approx 50 micrometer beam diameter was used for WDS and up to 500 micrometer beam diameter for EDS analysis. Average analyses of discretely sampled phases were coupled with the point count data to calculate the bulk composition using matrix algebra. Use of a defocused beam resulted in a contribution from multiple phases to each analytical point, and the analytical data were deconvolved relative to end-member phase chemistry on the fly. Impressive agreement was obtained between WDS and EDS measurements as well as comparison with bulk chemistry obtained by other methods. In the 30 years since these methods were developed, significant improvements in EPMA automation and computer processing have taken place. Digital beam control allows routine collection of x-ray maps by EDS, and stage mapping for WDS is conducted continuously at slew speed and incrementally by sampling at discrete points. Digital pulse processing in EDS systems has significantly increased the throughput for EDS mapping, and the ongoing development of Si-drift detector systems promises mapping capabilities rivaling WDS systems. Spectrum imaging allows a data cube of EDS spectra to be acquired and sophisticated processing of the original data is possible using matrix algebra techniques. The study of lunar and meteoritic materials includes the need to conveniently: (1) Characterize the sample at microscopic and macroscopic scales with relatively high sensitivity, (2) Determine the modal abundance of minerals, and (3) Identify and relocate discrete features of interest in terms of size and chemistry. The coupled substitution of cations in minerals can result in significant variation in mineral chemistry, but at similar average Z, leading to poor backscattered-electron (BSE) contrast discrimination of mineralogy. It is necessary to discriminate phase chemistry at both the trace element level and the major element level. To date, the WDS of microprobe systems is preferred for mapping due to high throughput and the ability to obtain the necessary intensity to discriminate phases at both trace and major element concentrations. It is desirable to produce fully quantitative compositional maps of geological materials, which requires the acquisition of k-ratio maps that are background and dead-time corrected, and which have been corrected by phi(delta z> or an equivalent algorithm at each pixel. To date, turnkey systems do not allow the acquisition of k-ratio maps and the rigorous correction in this manner. X-ray maps of a chondrule from the Ourique meteorite, and a comb-layered xenolith from the San Francisco volcanic field, have been analyzed and processed to extract phase information. The Ourique meteorite presents a challenge due to relatively low BSE contrast, and has been studied using spectrum imaging. X-ray maps for Si, Mg, and FeK(alpha) were used to produce RGB images. The xenolith sample contains sector-zoned augite, olivine, plagioclase, and basaltic glass. X-ray maps were processed using Lispix and ImageJ software to produce mineral phase maps. The x-ray maps for Mg, Ca, and Ti were used with traceback to generate binary images that were converted to RGB images. These approaches are successful in discriminating phases, but it is desirable to achieve the methods that were used on lunar samples 30 years ago on current microprobe systems. Curnt research includes x-ray mapping analysis of the Dalgety Downs chondrite by micro x-ray fluorescence and spectrum imaging, in collaboration with Kenny Witherspoon of IXRF Systems and Dale Newbury of NIST.
Carpenter, P.↗
Apollo Sample 64455: Petrologic and Geochemical Characterization of a Glass-Coated Impact Melt Rock
Introduction and Background: Impact melts are a key product of the impact cratering process. Impact melts can turbulently entrain pre-existing rock fragments, and melt part of those entrained materials until thermal equilibrium is achieved [1–3]. Lunar impact melt rocks are valuable for determining the precise ages of basin-forming and cratering events, which anchor the cratering chronology and dynamics of the entire solar system [4, and references therein]. Additionally, entrained clasts can inform on the petrology and age of crustal materials that predate the melt-forming impact. In lithologies where no pristine samples are available, entrained materials may hold the record of endogenous lunar volatiles, provided we can untangle their impact histories as high temperature impact melt can heat the clasts and may alter their native volatiles or isotopic signatures [5–6]. Here, we characterize an Apollo 16 sample, 64455,70B, in an effort to understand the physical, microstructural, and geochemical consequences of impact melt contact metamorphism. We acquired optical light and x-ray maps of the sample, as well as quantitative analyses via electron probe microanalysis (EPMA). These tasks allow us to better understand the interaction between impact melts and entrained clasts, ultimately closing knowledge gaps in high-temperature impact processing on planetary surfaces. Sample Description: Sample 64455 is an oblong crystalline rock encased in glass to form an egg-like shape [7–8]. The impact melt coating has altered the outer (1 to 2 mm) rind of the crystalline rock and has preserved schlieren. The interior crystalline rock is likely a crystalline impact melt rock based on its bulk Ir content of 2.25 parts per billion [9]. The composition of the impact melt glass rind cannot be solely derived from the crystalline interior, the glassy rind is more aluminous and less magnesian [10]. Neither the crystalline interior nor the glassy rind were radiometrically age dated, although several studies investigated its cosmogenic isotopes and exposure ages, which reveal the sample was exposed on the lunar surface for ~1–2 Ma [11–13]. Preliminary Results: The interior crystalline rock consists primarily of plagioclase with interstitial pyroxene and olivine. Plagioclase grains are zoned and compositions range from An97–89, while pyroxene compositions generally range from En68Fs19Wo13 to En82Fs15Wo3 and olivine are Fo77 to Fo85. Minor phases include Fe-Ni metal, Ca-phosphates, a K- and Si-rich phase, sulfides, and Fe-phosphides. The glass rind contains approximately 44 wt.% SiO2, 25 wt.% Al2O3, 6 wt.% FeO, 8 wt.% MgO, and 14 wt.% CaO, with other oxides at <1 wt.% each, although the composition of the glass becomes more variable closest to the crystalline rock. The rind consists of rounded plagioclase, pyroxene, and olivine crystals with interstitial melt. In some locations, the rounded crystals are surrounded by closely-packed, blade-like crystals, <5 µm in width. These results indicate that the crystalline interior has partially melted where in contact with the high-temperature impact melt and while further investigation is needed, pyroxene may have preferentially melted relative to olivine and plagioclase. Future Work: We plan to conduct electron backscatter diffraction (EBSD) mapping in order to determine crystallinity and crystal orientation. Next using transmission electron microscopy (TEM) data in conjunction with EBSD and EPMA information, we will model the diffusion of moderately volatile elements between the melt and remnant crystals.
A C Stadermann↗
Fe-ni phase diagram
Alpha and gamma solubility limits in iron-nickel phase diagram at high temperatures - quench- and-anneal and diffusion couple techniques and electron probe microanalysis
PHASE DIAGRAM↗
Investigation of lunar metal particles
Lunar breccia and fine sample metal particles, using optical and scanning electron microscopy and electron probe microanalysis
Goldstein, J. I.↗