Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron Bernstein waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Electron cyclotron-electron Bernstein wave emission diagnostics for the COMPASS tokamak

The COMPASS tokamak recently started operation at the Institute of Plasma Physics AS CR, v.v.i., Prague. A new 16-channel radiometer, operating alternatively in three frequency bands, has been designed and constructed. The system is prepared for detection of normal electron cyclotron emission (O1 or X2) or oblique electron Bernstein wave emission. The end-to-end calibration method includes all components that influence the antenna radiation pattern. A steady recalibration is possible using a noise generator connected to the radiometer input through a fast waveguide PIN-switch. Measurements of the antenna radiation characteristics (2D electric field) were performed in free space as well as in the tokamak chamber, showing the degradation effect of structures on the Gaussian beam shape. First plasma radiation temperature measurements from low-field circular plasmas are available.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron Bernstein wave emission based diagnostic on National Spherical Torus Experiment (invited)

National Spherical Torus Experiment (NSTX) is a spherical tokamak (ST) that operates with n{sub e} up to 10{sup 20} m{sup -3} and B{sub T} less than 0.6 T, cutting off low harmonic electron cyclotron (EC) emission widely used for T{sub e} measurements on conventional aspect ratio tokamaks. The electron Bernstein wave (EBW) can propagate in ST plasmas and is emitted at EC harmonics. These properties suggest thermal EBW emission (EBE) may be used for local T{sub e} measurements in the ST. Practically, a robust T{sub e}(R,t) EBE diagnostic requires EBW transmission efficiencies of >90% for a wide range of plasma conditions. EBW emission and coupling physics were studied on NSTX with an obliquely viewing EBW to O-mode (B-X-O) diagnostic with two remotely steered antennas, coupled to absolutely calibrated radiometers. While T{sub e}(R,t) measurements with EBW emission on NSTX were possible, they were challenged by several issues. Rapid fluctuations in edge n{sub e} scale length resulted in >20% changes in the low harmonic B-X-O transmission efficiency. Also, B-X-O transmission efficiency during H modes was observed to decay by a factor of 5-10 to less than a few percent. The B-X-O transmission behavior during H modes was reproduced by EBE simulations that predict that EBW collisional damping can significantly reduce emission when T{sub e}<30 eV inside the B-X-O mode conversion (MC) layer. Initial edge lithium conditioning experiments during H modes have shown that evaporated lithium can increase T{sub e} inside the B-X-O MC layer, significantly increasing B-X-O transmission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Bernstein wave conversion of high-field side injected X-modes in QUEST

This paper presents a detailed design of the Q-shu University experimental steady state spherical tokamak's (QUEST's) high-field side (HFS) injection system for electron Bernstein wave (EBW) excitation and the results of an experimental comparison of the HFS eXtraordinary X-mode and low-field side (LFS) ordinary O-mode injection of 8.2 GHz radio frequency (RF) power. Waveguides, as an alternative to mirror polarizers for transmitting RF X-mode power from LFS to HFS for EBW conversion, were used instead of the installation of an RF mirror. Testing of LFS-to-HFS RF power transmission at 8.2 GHz, using an RG-50-type vacuum waveguide in a bench-scale device filled with SF6 gas at 0.03 Mpa, revealed that an RF power of 10.8 kW could traverse the fundamental electron cyclotron resonance layer for 60 s without breakdown. The short-length, open-ended waveguide antenna used in the HFS injection-induced wave diffraction reduced the efficiency of power delivery to the upper hybrid resonance (UHR) by approximately 7% at an electron temperature of 50 eV. The HFS injection was able to produce brighter camera images than the standard LFS injection. The location of the UHR, as estimated by measuring the density with an interferometer, agreed with its location as measured by plasma radiation low-field, side-edge positions shown by fast camera imaging. This indicates that the plasma was produced by mode-converted EBW. The HFS injection had an absorption efficiency of 96%, compared to 40% for LFS. A greater fluctuation of floating potential adjustable to the lower hybrid wave (LHW) was observed in the HFS case by installing a Langmuir probe, confirming that EBW conversion efficiency was higher in the HFS case. Moreover, after setting the poloidal field to B PF = 7.6 mT, plasma current (I P ) in the HFS peaked at 1.3 kA, as opposed to 0.3 kA for LFS, despite LFS injection having a total power of 55 kW, compared to 40 kW for HFS. However, as the impurity level was comparatively high, it is believed that this I P is dominated by pressure-drive, which makes it difficult to analyze EBWCD. Finally, the line-integrated density in the HFS injection peaked at 1.6 × 10 18 m -2 , compared to 8 × 10 17 m -2 in the LFS one.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of electron Bernstein waves using FullWave with a 2D non-local hot plasma model

Hot plasma wave simulation capability is expanded in the FullWave code by updating the hybrid iterative solver in the code with a semi-implicit time stepping method. The new approach is used to simulate Electron Bernstein Wave (EBW) heating in over-dense spherical tokamak plasmas. The code’s hybrid iterative solver circumvents the prohibitive memory cost of direct methods by combining a time evolution of Maxwell’s equations with frequency-domain relaxation, while the conductivity kernel, calculated via 3D particle tracking, captures the essential non-local wave–particle interactions. One-dimensional EBW simulations verify the algorithm’s accuracy by demonstrating mode conversion from X-mode wave to EBW at the upper hybrid resonance and a strong cyclotron damping near the plasma core. Two-dimensional simulation reproduces the predicted short EBW wavelength and quantitatively matches the hot-plasma dispersion relation. This study demonstrates the fidelity of the hybrid solver for the electron cyclotron frequency range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An electron Bernstein wave heating scheme for the Proto-MPEX linear device

Linear plasma devices, such as the Prototype Material Plasma Exposure eXperiment (Proto-MPEX), are an economic method to study plasma-material interactions under high heat and particle fluxes. The Proto-MPEX device at Oak Ridge National Laboratory is a high-density helicon plasma generator with additional resonant electron heating to study plasma-material interactions in ITER-like conditions. Here, we present modeling results of an electron Bernstein wave (EBW) heating scheme for this device using a microwave-based system. A 28 GHz injection system is available to provide power levels up to 100 kW injected into low electron temperature and high electron density plasmas. A modified version of the GENRAY ray-tracing code, GENRAY-C, has been used to determine the EBW and electron cyclotron heating wave accessibility for these overdense plasmas. Modeling has shown that greater than 80% of mode conversion from the ordinary mode to the EBW is possible for 28 GHz injection in Proto-MPEX. Calculations show that by utilizing the effects of Doppler-shifted resonance absorption, power deposition near the core is possible. Finally, significant collisional damping, leading to edge absorption, is expected to occur for neutral pressures >1.0 mTorr; however, experiments can be designed to minimize these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Bernstein Wave Experiment on the Madison Symmetric Torus

A system to heat electrons and possibly drive off-axis field-aligned current is under development on the Madison Symmetric Torus RFP. Staged experiments have reached an input power of 150 kW at 3.6G Hz and have produced a localized increase in SXR emission during rf injection. This measured emission is consistent with modeling in its location, energy spectrum and dependence on radial diffusion within the plasma. The emission is strongest in the region where ray tracing predicts deposition of the injected power. The multi-chord SXR camera used is sensitive to 4-7 keV photons. Enhanced emission in this energy range is consistent with Fokker-Plank modeling of EBW injection. The enhanced SXR emission vanishes quickly when radial diffusion in the plasma is high (as indicated by m = 0 magnetic activity); this is also consistent with Fokker-Plank modeling. An increase of boron emission (and presumably boron within the plasma) is also observed during EBW injection. This presents an alternative explanation to the enhanced SXR emission. Subsequent experiments with a different antenna at 100 kW input showed a small increase in SXR emission near 3 keV. A higher frequency experiment (5.5 GHz) with more input power available is currently under construction. Initial tests are centered on a circular waveguide launcher which requires only a 5 cm circular port in the vacuum vessel and has a target launch power of 400 kW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison between off-resonance and electron Bernstein waves heating regime in a microwave discharge ion source

A microwave discharge ion source (MDIS) operating at the Laboratori Nazionali del Sud of INFN, Catania has been used to compare the traditional electron cyclotron resonance (ECR) heating with an innovative mechanisms of plasma ignition based on the electrostatic Bernstein waves (EBW). EBW are obtained via the inner plasma electromagnetic-to-electrostatic wave conversion and they are absorbed by the plasma at cyclotron resonance harmonics. The heating of plasma by means of EBW at particular frequencies enabled us to reach densities much larger than the cutoff ones. Evidences of EBW generation and absorption together with X-ray emissions due to high energy electrons will be shown. A characterization of the discharge heating process in MDISs as a generalization of the ECR heating mechanism by means of ray tracing will be shown in order to highlight the fundamental physical differences between ECR and EBW heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to “Comment on ‘Generalized dispersion relation for electron Bernstein waves in a non-Maxwellian magnetized anisotropic plasma’” [Phys. Plasmas 22, 024701 (2015)]

Sharifi and Parvazian have presented comments on our paper by questioning the validity of the results. The plots of different curves of kappa and (r, q) distributions produced by them are incorrect. They pretended as if we have made claim that our results are valid for large arguments of product of Bessel Function, whereas Neumann's series expansion is valid only for small arguments. In our paper, no claim is made that the results are valid for all values of b. Our results are valid only for b ≪ 1. The results plotted by the commenters are incorrect and in this response we are presenting correct plots of dispersion curves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Bernstein Wave Experiments at the WEGA Stellarator

Fundamental investigations on EBW excitation, propagation and absorption are presented. In particular the OXB mode conversion and EBW current drive with 2.45 GHz EBWs are investigated and compared with modeling. High density operation with 28 GHz EBWs could be achieved at 0.5 T (2nd harmonic). This regime is characterized by a additional strongly supra-thermal electron distribution with energies >10 keV. These electrons were detected by measurement of the EBW emission and by X-ray detection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrocenter-gauge kinetic algorithm for high frequency waves in magnetized plasmas

A kinetic simulation algorithm for high-frequency electromagnetic waves has been developed based on the gyrocenter-gauge kinetic theory. The magnetized plasma system is simulated in the gyrocenter coordinate system. The gyrocenter distribution function F is sampled on the gyrocenter, parallel velocity, and magnetic moment coordinates. The gyrocenter-gauge function S is sampled on the Kruskal rings and shares the first five coordinates with F. The moment integral of pullback transformation is directly calculated using the Monte Carlo method and an explicit difference scheme for Maxwell's equations in terms of potentials is adopted. The new algorithm has been successfully applied to the simulation studies of high frequency extraordinary wave, electron Bernstein wave, and the mode conversion process between the extraordinary wave and the electron Bernstein wave in inhomogeneous plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MMS Observations of Electrostatic Waves in an Oblique Shock Crossing

High-resolution particle and wave measurements taken during an oblique bow shock crossing by the Magnetospheric Multiscale (MMS) mission are analyzed. Two regions of differing magnetic behavior are identified within the shock, one with active magnetic fluctuations and one with laminar interplanetary magnetic field topology. A prominent reflected ion population is observed in both regions. The active magnetic region is characterized by large-amplitude (>100 mV/m) electrostatic solitary waves, electron Bernstein waves, and ion acoustic waves, along with intermittent current activity and localized electron heating. In the region of laminar magnetic field, ion acoustic waves are prominently observed. Solar wind ion deceleration is observed in both regions of active and laminar magnetic field. All observations suggest that solar wind deceleration can occur as a result of multiple independent processes, in this case current and ion-ion instabilities.

Goodrich, Katherine A.↗

Parametric Mechanism of Anomalous Microwave Power Absorption in Experiments on Electron Cyclotron Heating in Toroidal Magnetic Traps

The nonlinear stage of the parametric decay instability of an extraordinary wave is analyzed in the presence of a nonmonotonic density profile. The decay excites an electron Bernstein wave, which is localized in the vicinity of a local density maximum, and an ion Bernstein wave, which leaves a nonlinear interaction region and is absorbed by ions in the vicinity of the harmonics of the ion cyclotron frequency. The main mechanism of instability saturation is considered to be a cascade of decays of a primary daughter electron Bernstein wave, which leads to the excitation of localized secondary electron Bernstein waves and ion cyclotron (Bernstein) waves. The localization of electron Bernstein waves causes a significant decrease in the secondary- decay excitation threshold, which is thought to provide saturation of the primary instability at the lowest level. The saturation of the primary parametric decay instability of a pump wave and the anomalous absorption of the pump power are analytically estimated. A numerical simulation is performed using the parameters that are typical of the experiments on the electron cyclotron resonance heating of plasma at the second resonance harmonic in TCV tokamak.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitation of electrostatic waves in the electron cyclotron frequency range during magnetic reconnection in laboratory overdense plasmas

We report the observation of electromagnetic radiation at high harmonics of the electron cyclotron frequency that was considered to be converted from electrostatic waves called electron Bernstein waves (EBWs) during magnetic reconnection in laboratory overdense plasmas. The excitation of EBWs was attributed to the thermalization of electrons accelerated by the reconnection electric field around the X-point. The radiative process discussed here is an acceptable explanation for observed radio waves pulsation associated with major flares.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heating and current drive in NSTX with electron berstein waves and high harmonic fast waves

A suitable theoretical and computational framework for studying heating and current drive by electron Bernstein waves in the National Spherical Torus Experiment has been developed. This framework can also be used to study heating and current drive by electron Bernstein waves in spherical tori and other magnetic confinement devices. It is also useful in studying the propagation and damping of electron cyclotron waves in the International Thermonuclear Experimental Reactor

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Superthermal electrons and Bernstein waves in Jupiter's inner magnetosphere

A theoretical model for generation of banded electrostatic emissions by low density, superthermal electrons is developed for application to Jupiter's magnetosphere. The model employs a power law form for the energy dependence and a loss cone pitch angle distribution of the superthermals to drive convective instability of Bernstein modes. A direct correspondence between spectral features of the 3/2 band and resonant superthermal electrons is found. The concept of a critical flux of resonant electrons able to provide 10 e-foldings of electric field amplification yields an explicit relation in terms of the background thermal electron pressure. This result is used to construct a theoretical/empirical model of thermal electron density and temperature from 6-20 Jupiter radii in the Jovian magnetosphere which suggests that the electron temperature is less than the ion temperature which is approximately equal to 10 times the electron temperature in this region. Finally, wave ray paths are computed for propagation in the magnetic equator and in the magnetic meridional plane of a dipole magnetic field. These ray paths suggest that intense wave activity is tightly confined to a small latitudinal extent, less than + or - approximately 4 deg, about the magnetic equator.

Barbosa, D. D.↗