Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrolytic dissolver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electrolyte Design for Silicon-Based Li-Ion Battery Guided by Chemical Reactivity of Solvents with a Model Silicon Anode

Here, the use of a model compound trimethylsilyllithium was demonstrated to study the chemical reactions of electrolyte with as a principal guide to design electrolyte for silicon-based Li-ion battery. Me 3 Si - anion initiates ring-opening polymerization of EC leading to the formation of poly(ethylene ether carbonate), which subsequently defragments into oligomers and dissolves in electrolyte. FEC was found to react differently, generating LiF and vinylene carbonate (VC). Further reaction of VC with Me 3 SiLi generated poly(hydroxymethylene), which is a nonsoluble polymer and the critical SEI component. The insights from this study have guided the new electrolyte design for the Si-based battery.

25 ENERGY STORAGE↗
DOE OSTI2023

Mastering the synergy between Na 3 V 2 (PO 4 ) 2 F 3 electrode and electrolyte: A must for Na-ion cells

Sodium-ion batteries are emerging as suitable energy storage devices for special applications such as high-power devices with the advantages of being cheaper and more sustainable than the Li-ion equivalents. The sodium ion cells consisting of polyanionic Na 3 V 2 (PO 4 ) 2 F 3 - hard carbon electrodes exhibit high power rate capabilities but limited cycle life, especially at high temperatures. To circumvent this drawback we herein conducted in-depth analyses of the origins of structural degradations occurring in Na 3 V 2 (PO 4 ) 2 F 3 electrodes upon long cycling. Vanadium dissolution with associated parasitic reactions is identified as one of the major reasons for cell failure. Its amount varies depending on the electrolyte, with NaTFSI-based electrolyte showing the least vanadium dissolution as the TFSI - anion decomposes without producing acidic impurities, in contrast to the NaPF 6 -based electrolyte. The dissolved vanadium species undergoes oxidation and reduction processes at the Na 3 V 2 (PO 4 ) 2 F 3 and HC electrodes, respectively, with the electrochemical signature of these processes being used as a fingerprint to identify state of health of the 18650 cells. Here, having found that surface reactivity is the primary cause of vanadium dissolution we provide methods to mitigate it by combining surface coating and optimized electrolyte formulation.

25 ENERGY STORAGE↗
DOE OSTI2021

Understanding the Roles of the Electrode/Electrolyte Interface for Enabling Stable Li∥Sulfurized Polyacrylonitrile Batteries

Sulfurized polyacrylonitrile (SPAN) is a promising high-capacity cathode material. Here, we use spatially resolved X-ray absorption spectroscopy combined with X-ray fluorescence (XRF) microscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy to examine the structural transformation of SPAN and the critical role of a robust cathode–electrolyte interface (CEI) on the electrode. LiS x species forms during the cycling of SPAN. However, in carbonate-based electrolytes and ether-based electrolytes with LiNO 3 additives, these species are well protected by the CEI and do not dissolve into the electrolytes. In contrast, in an ether-based electrolyte without the LiNO 3 additive, LiS x species dissolve into the electrolyte, resulting in the shuttle effect and capacity loss. Examination of the Li anode by XRF and SEM reveals dense spherical Li morphology in ether-based electrolytes, but sulfur is present in the absence of the LiNO 3 additive. In contrast, porous dendritic Li is found in the carbonate electrolyte. These analyses established that an ether-based electrolyte with LiNO 3 is a superior choice that enables stable cycling of both electrodes. Based on these insights, we successfully demonstrate the stable cycling of high areal loading SPAN cathode (>6.5 mA h cm –2 ) with lean electrolyte amounts, showing promising Li∥SPAN cell performance under practical conditions.

25 ENERGY STORAGE↗
DOE OSTI2024

Designing electrolytes with high solubility of sulfides/disulfides for high-energy-density and low-cost K-Na/S batteries

Alkaline metal sulfur (AMS) batteries offer a promising solution for grid-level energy storage due to their low cost and long cycle life. However, the formation of solid compounds such as M 2 S 2 and M 2 S (M = Na, K) during cycling limits their performance. Here we unveil intermediate-temperature K-Na/S batteries utilizing advanced electrolytes that dissolve all polysulfides and sulfides (K 2 S x , x = 1–8), significantly enhancing reaction kinetics, specific capacity, and energy density. These batteries achieve near-theoretical capacity (1655 mAh g -1 sulfur) at 75 °C with a 1 M sulfur concentration. At a 4 M sulfur concentration, they deliver 830 mAh g -1 at 2 mA cm -2 , retaining 71% capacity after 1000 cycles. This new K-Na/S battery with specific energy of 150-250 Wh kg -1 only employs earth-abundant elements, making it attractive for long-duration energy storage.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Epitaxial thinning process

A method is described for thinning an epitaxial layer of a wafer that is to be used in producing diodes having a specified breakdown voltage and which also facilitates the thinning process. Current is passed through the epitaxial layer, by connecting a current source between the substrate of the wafer and an electrolyte in which the wafer is immersed. When the wafer is initially immersed, the voltage across the wafer initially drops and then rises at a steep rate. When light is applied to the wafer the voltage drops, and when the light is interrupted the voltage rises again. These changes in voltage, each indicate the breakdown voltage of a Schottky diode that could be prepared from the wafer at that time. The epitaxial layer is thinned by continuing to apply current through the wafer while it is immersed and light is applied, to form an oxide film and when the oxide film is thick the wafer can then be cleaned of oxide and the testing and thinning continued. Uninterrupted thinning can be achieved by first forming an oxide film, and then using an electrolyte that dissolves the oxide about as fast as it is being formed, to limit the thickness of the oxide layer.

Siegel, C. M.↗
NASA NTRS1994

Fabricating porous silicon carbide

The formation of porous SiC occurs under electrochemical anodization. A sample of SiC is contacted electrically with nickel and placed into an electrochemical cell which cell includes a counter electrode and a reference electrode. The sample is encapsulated so that only a bare semiconductor surface is exposed. The electrochemical cell is filled with an HF electrolyte which dissolves the SiC electrochemically. A potential is applied to the semiconductor and UV light illuminates the surface of the semiconductor. By controlling the light intensity, the potential and the doping level, a porous layer is formed in the semiconductor and thus one produces porous SiC.

Shor, Joseph S.↗
DOE OSTI2023

Accelerated Characterization of Electrode‐Electrolyte Equilibration

Operational durability is poorly characterized by traditional (photo)electrocatalyst discovery workflows, creating a barrier to scale-up and deployment. Corrosion is a prominent degradation mechanism whose thermodynamics depend on the concentration of corrosion products in electrolyte. We present an automated system for characterizing the equilibration of (photo)electrodes with dissolved metals in electrolyte for a given electrode, pH, and electrochemical potential. Automation of electrode selection, electrolyte preparation, and electrolyte aliquoting enables rapid identification of self-passivating electrodes and estimation of the equilibrium dissolved metals concentrations. The technique is demonstrated for metal oxide photoanodes in alkaline electrolyte, where BiVO 4 is found to continually corrode, in agreement the literature. An amorphous Ni−Sb−O photoanode is found to passivate with a Ni-rich coating on the order of 1 monolayer with less than 1 μM total dissolved metals in electrolyte, demonstrating its suitability for durable photoelectrochemical operation. The automation and throughput of the instrument are designed for incorporation in accelerated electrocatalyst discovery workflows so that durability can be considered on equal footing with activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Locally Confined Polysulfide-Reactive Electrolytes for Shuttle-Free Sodium–Sulfur Batteries

Sodium-sulfur batteries promise high-energy-density and sustainable electrochemical energy storage but suffer from uncontrolled polysulfides dissolution and high sodium reactivity. These challenges fundamentally originate from poor electrolyte-electrode compatibility. Current electrolyte research inadequately addresses the trade-off between minimal polysulfides solvation and stabilizing sodium interfaces. Here, we present a locally-confined polysulfide-reactive electrolyte strategy that mediates the polysulfide dissolution dynamics and sodium stability by leveraging an electrophilic solvating species with a localized high-concentration electrolyte. This design enables shuttle-free cell operation by synergistically restricting the global solvating power of the electrolyte through intermolecular interactions and locally scavenging sparingly dissolved polysulfides via electrolyte electrophilicity. The precisely confined surface reaction facilitates a protective cathode-electrolyte interface, realizing a quasi-solid-state sulfur conversion in our liquid ether-based electrolyte, which crucially avoids crossover-induced catastrophic sodium-metal degradation. The proposed electrolyte demonstrates long-term cycling of high-mass-loading sulfur cathodes (> 3 mg S cm −2 with commercial carbon host and 70 wt% sulfur content), which afford 710 mA h g −1 over 400 cycles in coin cells and steady pouch cell operation over 180 cycles. Furthermore, this work establishes a scalable electrolyte design protocol that regulates the reaction chemistry of highly reactive electrodes, offering a pathway toward sustainable renewable energy storage.

25 ENERGY STORAGE↗
DOE OSTI2023

Speciation of Transition Metal Dissolution in Electrolyte from Common Cathode Materials

Abstract Significant capacity loss has been observed across extended cycling of lithium‐ion batteries cycled to high potential. One of the sources of capacity fade is transition metal dissolution from the cathode active material, ion migration through the electrolyte, and deposition on the solid‐electrolyte interphase on the anode. While much research has been conducted on the oxidation state of the transition metal in the cathode active material or deposited on the anode, there have been limited investigations of the oxidation state of the transition metal ions dissolved in the electrolyte. In this work, X‐ray absorption spectroscopy has been performed on electrolytes extracted from cells built with four different cathode active materials (LiMn 2 O 4 (LMO), LiNi 0.5 Mn 1.5 O 4 (LNMO), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), and (x Li 2 MnO 3 *(1‐x) LiNi a Mn b Co c O 2 , with a+b+ c =1) (LMRNMC)) that were cycled at either high or standard potentials to determine the oxidation state of Mn and Ni in solution. Inductively coupled plasma‐mass spectrometry has been performed on the anodes from these cells to determine the concentration of deposited transition metal ions. While transition metal ions were found dissolved in all electrolytes, the oxidation state(s) of Mn and Ni were determined to be dependent on the cathode material and independent of cycling potential.

Rynearson, Leah↗
DOE OSTI2023

Speciation of Transition Metal Dissolution in Electrolyte from Common Cathode Materials

Significant capacity loss has been observed across extended cycling of lithium-ion batteries cycled to high potential. One of the sources of capacity fade is transition metal dissolution from the cathode active material, ion migration through the electrolyte, and deposition on the solid-electrolyte interphase on the anode. While much research has been conducted on the oxidation state of the transition metal in the cathode active material or deposited on the anode, there have been limited investigations of the oxidation state of the transition metal ions dissolved in the electrolyte. Here, in this work, X-ray absorption spectroscopy has been performed on electrolytes extracted from cells built with four different cathode active materials (LiMn 2 O 4 (LMO), LiNi 0.5 Mn 1.5 O 4 (LNMO), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), and (x Li 2 MnO 3 *(1-x) LiNi a Mn b Co c O 2 , with a+b+c=1) (LMRNMC)) that were cycled at either high or standard potentials to determine the oxidation state of Mn and Ni in solution. Inductively coupled plasma-mass spectrometry has been performed on the anodes from these cells to determine the concentration of deposited transition metal ions. While transition metal ions were found dissolved in all electrolytes, the oxidation state(s) of Mn and Ni were determined to be dependent on the cathode material and independent of cycling potential.

25 ENERGY STORAGE↗
DOE OSTI2022

Near-infrared spectra and molar absorption coefficients of trivalent lanthanides dissolved in molten LiCl–KCl eutectic

Determining the concentration of the dissolved lanthanide species in LiCl–KCl eutectic salt is important to the development of pyrochemical reprocessing of used nuclear fuel. In this process, lanthanide fission products are found dissolved in the electrorefiner electrolyte in their trivalent oxidation state. The presence of dissolved trivalent lanthanides increases the liquidus temperature of the electrolyte mixture and can lead to the formation of insoluble oxide or oxychloride phases and must therefore be continuously monitored and controlled during the operation. Absorbance spectroscopy is a promising method for continuous measurement of the concentration of lanthanides and other elements dissolved in the electrolyte. The absorption of light by elements is linearly proportional to the concentration of the element for relatively dilute solutions according to the Beer-Lambert law. Although measurement of the absorption of ultraviolet and visible range light by lanthanides in LiCl–KCl eutectic molten salt have been explored previously, near infrared (NIR) absorption spectroscopy has received far less attention. It may, however, provide a better analytical signal when insoluble phases are present due to less Raleigh scattering compared to shorter wavelength radiation. Additionally, it may allow for concentration determination for certain elements using NIR absorption features where UV and visible range features are overlapping with features from other species. In this study, we report the UV–Vis–NIR spectra of the trivalent lanthanide chlorides of neodymium, samarium, and dysprosium in LiCl–KCl eutectic. Molar absorption coefficients are reported for analytically useful absorption maxima, with a focus on the molar absorption coefficients for NIR absorption maxima which have not been reported previously. Additionally, we observe a NIR-range absorption band of Nd3+ which was previously predicted but never experimentally observed. Here, we compare the calculated crystal field levels to the newly observed absorbance band and find them to be in good agreement with previous predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2009

Fluoroester Co-Solvents for Low-Temperature Li+ Cells

Electrolytes comprising LiPF6 dissolved in alkyl carbonate/fluoroester mixtures have been found to afford improved low-temperature performance and greater high-temperature resilience in rechargeable lithium-ion electrochemical cells. These and other electrolytes comprising lithium salts dissolved mixtures of esters have been studied in continuing research directed toward extending the lower limit of operating temperatures of such cells. This research at earlier stages, and the underlying physical and chemical principles, were reported in numerous previous NASA Tech Briefs articles. The purpose of the present focus on high-temperature resilience in addition to low-temperature performance is to address issues posed by the flammability of the esters and, at temperatures near the upper end (about 55 C) of their intended operating temperature range, by their high chemical reactivity. As used here, high-temperature resilience signifies, loosely, a desired combination of low flammability of an electrolyte mixture and the ability of a cell that contains the mixture to sustain a relatively small loss of reversible charge/discharge capacity during storage in the fully charged condition at high temperature. The selection of fluoroesters for study as candidate electrolyte solvent components to increase high-temperature resilience was prompted in part by the observation that like other halogenated compounds, fluoroesters have low flammability. The fluoroesters investigated in this study include trifluoroethyl butyrate (TFEB), ethyl trifluoroacetate (ETFA), trifluoroethyl acetate (TFEA), and methyl pentafluoropropionate (MPFP). Solvent mixtures were prepared by mixing these fluoroesters with two other esters: ethylene carbonate (EC) and ethyl methyl carbonate (EMC).

Smart, Marshall↗
DOE OSTI2020

Mediated Fuel Cells: Soluble Redox Mediators and their Applications to Electrochemical Reduction of O2 and Oxidation of H2, Alcohols, Biomass, and Complex Fuels

Mediated fuel cells are electrochemical devices that produce power in a manner similar to that of conventional proton exchange membrane fuel cells (PEMFCs). They differ from PEMFCs in their use of redox mediators dissolved in liquid electrolyte to conduct oxidation of the fuel or reduction of the oxidant, typically O2, in bulk solution. The mediators transport electrons (and often protons) between the electrode and the catalysts or chemical reagents in solution. This strategy can help overcome many of the challenges associated with conventional fuel cells, including managing complex multi-phase reactions (as in O2 reduction) or the use of challenging or heterogeneous fuels, such as hydrocarbons, polyols and biomass. Mediators are also commonly used in enzymatic fuel cells, where direct electron transfer from the electrode to the enzymatic active site can be slow. This review provides a comprehensive survey of historical and recent mediated fuel cell efforts, including applications using chemical and enzymatic catalysts. Our research on in this field has been exploring a number of different topics and has been supported different funding sources: the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences (molecular mediators for catalytic oxygen reduction); the Great Lakes Bioenergy Research Center, DOE Office of Science DE-SC0018409 (research on biomass-based fuels; U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Catalysis Program, DE-FG02-05ER15690 (copper-catalyzed oxidation reactions); and the NIH NIGMS, R01 GM100143 and R35 GM134929 (use of molecular mediators for organic chemical synthesis).

Anson, Colin W.↗
DOE OSTI2021

Localized High Concentration Electrolyte and Its Effects on Polysulfide Structure in Solution

Lithium–sulfur batteries (LiSB) are a promising next-generation lithium energy storage technology that offers a multifold improvement over the traditional lithium-ion battery. However, the LiSB still faces the unresolved issue of the polysulfide shuttle effect. This phenomenon arises from the dissolution of sulfur intermediate reduction products into the electrolyte, which then causes a cascade of issues throughout the battery. Many mitigation strategies have been proposed to counteract this effect including the use of novel electrolyte compositions. Recently, there has been increased focus on the use of hydrofluorinated ethers as a major constituent of an electrolyte for lithium batteries. Previous studies have reported that the presence of these species create localized high concentration electrolytes (LHCE) which can have many advantages resulting in improved battery performance. Here, we report on how the inclusion of a hydrofluorinated ether BTFE (bis(2,2,2-trifluoroethyl) ether) modifies the general properties of a LiSB electrolyte and the structure of dissolved polysulfide species in the electrolyte. Here, we found that the inclusion of BTFE does not modify the primary solvation structure of Li + directly but actively participates in secondary solvation shells. With a high concentration of BTFE, the LHCE formation is observed by the presence of clusters of non-BTFE molecules. The structure of polysulfide species in solution was modified by the BTFE in the same way. Much of the primary solvation structure was kept, but the presence of BTFE increased polysulfide–polysulfide clustering. These results indicate that the polysulfide solubility will be limited due to the promotion of clustering.

25 ENERGY STORAGE↗
DOE OSTI2024

Low-Temperature Characterization of a Nonaqueous Liquid Electrolyte for Lithium Batteries

Rechargeable batteries exhibit poor performance at low temperatures due to sluggish ion transport through the electrolytic phase. Ion transport is governed by three transport parameters—conductivity, diffusion coefficient, and the cation transference number with respect to the solvent velocity—and the thermodynamic factor. Understanding how these parameters change with temperature is necessary for designing improved electrolytes. In this work, we combine electrochemical techniques with electrophoretic NMR to determine the temperature dependence of these parameters for a liquid electrolyte, LiTFSI salt dissolved in tetraglyme between −20 and 45 °C. At colder temperatures, all species in the electrolyte tend to move more slowly due to increasing viscosity, which translates to a monotonic decrease in conductivity and diffusion coefficient with decreasing temperature. Surprisingly, we find that the field-induced velocity of solvent molecules at a particular salt concentration is a nonmonotonic function of temperature. The cation transference number with respect to the solvent velocity thus exhibits a complex dependence on temperature and salt concentration. The measured thermodynamic and transport properties are used to predict concentration gradients that will form in a lithium-lithium symmetric cell under a constant applied potential as a function of temperature using concentrated solution theory. The calculated steady current at −20 °C is lower than that at 45 °C by roughly two orders of magnitude.

25 ENERGY STORAGE↗
DOE OSTI2022

Low temperature lithium production

A method and electrolysis cell for producing lithium metal at a low temperature. The method includes combining (i) acetonitrile and (ii) a cation bis(trihaloalkylsulfonyl)imide, cation bis(trihalosulfonyl)imidic acid, a cation bis(trihaloalkylsulfonyl)amide, or cation bis(trihaloalkylsulfonyl)amidic acid in a weight ratio of (i) to (ii) about 100:1 to about 5:1 to provide a non-aqueous electrolyte composition. A lithium compound selected from the group consisting of LiOH, Li2O and Li2CO3 is dissolved in the electrolyte composition to provide a lithium doped electrolyte composition. Power is applied to the electrolyte composition to form lithium metal on a cathode of an electrolysis cell. The lithium metal separated from the cathode has a purity of at least about 95 wt. %.

Freiderich, John W.↗
DOE OSTI2020

Predicting chemical reaction equilibria in molten carbonate fuel cells via molecular simulations

It has been recently suggested that hydroxide ions can be formed in the electrolyte of molten carbonate fuel cells when water vapor is present. The hydroxide can replace carbonate in transporting electrons across the electrolyte, thereby reducing the CO 2 separation efficiency of the fuel cell although still producing electricity. In this work, we obtain the equilibrium concentration of hydroxide in five molten alkali carbonate salts from molecular simulations. The results reveal that there can be a substantial amount of hydroxide in the electrolyte at low partial pressures of CO 2 . In addition, we find that the equilibrium concentration of molecular water dissolved in the electrolyte is over two orders of magnitude higher than that of CO 2 . Increasing the size and polarizability (or in other words reducing the “hardness”) of the cations present in the electrolyte can reduce the hydroxide fraction, but at the cost of lowering ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Low temperature lithium production

A method and electrolysis cell for producing lithium metal at a low temperature. The method includes combining (i) phenyl trihaloalkyl sulfone and (ii) an organic cation bis(trihaloalkylsulfonyl)imide or organic cation bis(trihalosulfonyl)imidic acid in a weight ratio of (i) to (ii) about 10:90 to about 60:40 to provide a non-aqueous electrolyte composition. A lithium compound selected from the group consisting of LiOH, Li 2 O and Li 2 CO 3 is dissolved in the electrolyte composition to provide a soluble lithium ion species in the electrolyte composition. Power is applied to the electrolyte composition to form lithium metal on a cathode of an electrolysis cell. The lithium metal is separated from the cathode has a purity of at least about 95 wt. %.

36 MATERIALS SCIENCE↗