Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Radio frequency electrical resistance measurement under destructive pulsed magnetic fields

We developed a resistance measurement using radio frequency reflection to investigate the electrical transport characteristics under destructive pulsed magnetic fields above 100 T. A sample stage consisting of a homemade flexible printed circuit reduced the noise caused by the induced voltage from the pulsed magnetic fields, improving the accuracy of the measurements of the reflected waves. From the obtained reflectance data, the absolute value of the magnetoresistance was successfully determined by analyzing the phase with admittance charts. In conclusion, these developments enable more accurate and comprehensive measurements of electrical resistance in pulsed magnetic fields.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Synthesis, Structures, and Transport Properties of Quaternary Ba–Ag– Tr –As Materials ( Tr = Ga, In)

The synthesis, structures, and properties of two quaternary barium–arsenide materials are presented. The first, Ba 4 Ag 2.3 In 1.7 As 8 , is a novel material with the monoclinic unit cell ( P 2 1 / m space group). The layered crystal structure of Ba 4 Ag 2.3 In 1.7 As 8 may be considered a lower‐symmetry, distorted analog of the LaCuSb 2 structure. The structure features a rare As fragment, cis‐trans As chains along the [010] direction. Large crystals of Ba 4 Ag 2.3 In 1.7 As 8 can be grown from Bi flux and are used for subsequent transport property measurements. Electrical resistivity and heat capacity properties are reported, establishing Ba 4 Ag 2.3 In 1.7 As 8 as a metallic phase. The second material, Ba 4 AgGa 5 As 8 , is a 3D material that crystallizes in the orthorhombic unit cell (noncentrosymmetric and polar Iba 2 space group). Expanding upon its original discovery, the optimized synthetic profile for single‐phase polycrystalline samples as well as transport properties relevant to thermoelectric applications are presented. Ba 4 AgGa 5 As 8 exhibits a high Seebeck coefficient of 290 μV K −1 at room temperature, indicative of lower carrier concentrations typical for nonmetallic phases. Electrical resistivity measurements also affirm conventional semiconducting behavior for Ba 4 AgGa 5 As 8 .

Kyveryga, Victoria [Department of Chemistry Iowa S↗
DOE OSTI2024

Two-dimensional heavy fermions in the van der Waals metal CeSiI

Heavy-fermion metals are prototype systems for observing emergent quantum phases driven by electronic interactions. A long-standing aspiration is the dimensional reduction of these materials to exert control over their quantum phases, which remains a significant challenge because traditional intermetallic heavy-fermion compounds have three-dimensional atomic and electronic structures. Here we report comprehensive thermodynamic and spectroscopic evidence of an antiferromagnetically ordered heavy-fermion ground state in CeSiI, an intermetallic comprising two-dimensional (2D) metallic sheets held together by weak interlayer van der Waals (vdW) interactions. Owing to its vdW nature, CeSiI has a quasi-2D electronic structure, and we can control its physical dimension through exfoliation. The emergence of coherent hybridization of f and conduction electrons at low temperature is supported by the temperature evolution of angle-resolved photoemission and scanning tunnelling spectra near the Fermi level and by heat capacity measurements. Electrical transport measurements on few-layer fakes reveal heavy-fermion behaviour and magnetic order down to the ultra-thin regime. Importantly, our work establishes CeSiI and related materials as a unique platform for studying dimensionally confined heavy fermions in bulk crystals and employing 2D device fabrication techniques and vdW heterostructures to manipulate the interplay between Kondo screening, magnetic order and proximity effects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

DC electrical conductivity measurements of warm dense matter using ultrafast THz radiation

We describe measurements of the DC electrical conductivity of warm dense matter using ultrafast terahertz (THz) pulses. THz fields are sufficiently slowly varying that they behave like DC fields on the timescale of electron–electron and electron–ion interactions and hence probe DC-like responses. Using a novel single-shot electro-optic sampling technique, the electrical conductivity of the laser-generated warm dense matter was determined with <1 ps temporal resolution. We present the details of the single-shot THz detection methodology as well as considerations for warm dense matter experiments. We, then, provide proof-of-concept studies on aluminum driven to the warm dense matter regime through isochoric heating and shock compression. Our results indicate a decrease in the conductivity when driven to warm dense matter conditions and provide a platform for future warm dense matter studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Nanomechanical vibrational response from electrical mixing measurements

Driven nanomechanical resonators based on low-dimensional materials are routinely and efficiently detected with electrical mixing measurements. However, the measured signal is a non-trivial combination of the mechanical eigenmode displacement and an electrical contribution, which makes the extraction of the driven mechanical response challenging. Here, we report a simple yet reliable method to extract solely the driven mechanical vibrations by eliminating the contribution of pure electrical origin. This enables us to measure the spectral mechanical response as well as the driven quadratures of motion. This method is crucial for nanomechanical vibrations in the nonlinear regime, since the shape of the mechanical response depends on the physics at work. We further show how to calibrate the measured signal into units of displacement. Our method marks a key step forward in the study of nanoelectromechanical resonators based on low-dimensional materials in the nonlinear regime.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evidence of Superconductivity in Electrical Resistance Measurements of Hydrides Under High Pressure

In the standard van der Pauw four-probe configuration commonly used for electrical resistance measurements, including those of hydrogen-rich samples at high pressures, the application of electrical current through one pair of leads while measuring voltage difference across another pair is a fundamental practice (see the inset in Fig. 1c). In the scenario described in Ref. [5], where electrical resistance vanishes due to disconnection between current and voltage probes or due to an onset of giant magnetoresistance in parts of the sample, it is crucial to consider the implications across different probe orientations: while one orientation may indeed result in vanishing electrical resistance, a divergence of the electrical resistance towards infinity will be observed in an alternative orientation where the applied current pattern is rotated a quarter turn (see the scheme on the inset in Fig. 1c). It is imperative to acknowledge that experimental data encompassing all possible probe orientations are essential for eliminating artifacts and assessing sample homogeneity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spatiotemporally resolved measurements of electric field around a piezoelectric transformer using electric-field induced second harmonic (E-FISH) generation

When a piezoelectric transformer (PT) is actuated at its second harmonic frequency by a low input voltage, the generated electric field at the distal end can be sufficient to breakdown the surrounding gas, making them attractive power sources for non-equilibrium plasma generation. Understanding the potential and electric fields produced in the surrounding medium by the PT is important for effectively designing and using PT plasma devices. In this work, the spatiotemporally resolved characteristics of the electric field generated by a PT operating in open air have been investigated using the femtosecond electric field-induced second harmonic generation (E-FISH) method. Here, electric field components were determined by simultaneously conducting E-FISH measurements with the incident laser polarized in two orthogonal directions relative to the PT crystal. Results of this work demonstrate the spatial distribution of electric field around the PT’s output distal end and how it evolves as a function of time. Notably, the strongest electric field appears on the face of the PT’s distal surface, near the top and bottom edges and decreases by approximately 70% over 3 mm. The time delay between the PT’s input voltage and measured electric field indicates that there is an about 0.45 phase difference between the PT’s input voltage and output signal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

In situ TEM measurement of electrical properties of individual BaTiO 3 nanocubes

We report on the measurement of the electrical properties of individual pristine and doped BaTiO 3 nanocubes by using in situ transmission electron microscopy with a two-electrode configuration. The dimensions of the nanocubes tested are between 10 and 20 nm, which rendered their in situ electrical characterization challenging. We characterized 4%Cr and 5%La (atomic percentage) doped BaTiO 3 nanocubes and compared them with the properties of pristine BaTiO3 nanocubes synthesized by the same solvothermal method. We found that the resistance of all three types of nanocubes when displayed in log-scale shows a nearly linear dependence on the applied electric field (R2 ≥ 0.95) over a wide range of electric fields (50–900 kV/cm). Compared with pristine BaTiO 3 nanocubes, the resistance of both 4%Cr and 5%La doped nanocubes showed reduced variation rates with respect to the electric field, with 5%La doping, demonstrating a better reduction in the variation rate. By developing techniques capable of evaluating the properties of individual BaTiO 3 nanocubes, we expect that our work to open the door to the use of BaTiO 3 nanomaterials in the design of future multilayer ceramic capacitors with improved volumetric efficiency and ferroelectrics-enabled nanodevices with advanced functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Qualification of 3-D Printed Mortar With Electrical Conductivity Measurements

Additive manufacturing (AM) or 3D printing of concrete allows for construction of arbitrary shape structures without a mold. Since reproducibility of 3D printed concrete is lower than that of conventional fabrication, each 3D printed structure should be monitored for proper curing. Conventional qualification of concrete is based on several tests, including destructive compressive strength measurements. Because a structure is 3-D printed layer-by-layer, the surfaces of AM concrete structures have significant surface roughness. This limits the applicability of conventional nondestructive testing methods. We investigated qualification of 3D printed mortar by monitoring curing with nondestructive electrical conductivity measurements. Bulk resistance of concrete was extracted from electrochemical impedance spectroscopy (EIS measurements made using custom flexible self-adhesive electrodes, which contour to rough surfaces. We show that bulk resistivity of concrete increases linearly with time. This allows for developing a calibration curve for compressive strength lookup from nondestructive electrical conductivity measurements. Conductivity measurements also allow for estimation of formation factor, which is an indicator of mortar permeability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electric Field Measurements at the Surface of a Piezoelectric Transformer for Plasma Jet Formation using the Plasma Research Facility at Sandia National Laboratory (Final Report)

The overall goal of this research is to understand how low-temperature non-equilibrium plasmas form directly off the surface of piezoelectric crystals. Specifically, this project aims to temporally and spatially resolve how the electric field evolves on and near the surface of a piezoelectric transformer (PT) at conditions that produce an atmospheric-pressure air plasma jet emanating from the corner of the PT. In this work, we used the Plasma Research Facility (PRF) at Sandia National Laboratory to conduct temporally- and spatially-resolved electric field induced second harmonic (E-FISH) measurements of the electric field at and near the surface of a piezoelectric transformer, providing a fundamental understanding of how piezoelectric crystals can be used for plasma generation. We carried out two Objectives: Objective 1 – The first objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just below conditions that lead to plasma jet formation. Such a measurement can be used to explain when and where the electric field peaks, leading to plasma formation; Objective 2 – The second objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just at conditions of plasma jet formation. This, in principle, gives a more accurate determination of how the electric field leads to plasma formation but is more difficult due to the relatively stochastic plasma jet behavior of a PT. This work was complemented by an award from the Sandia PRF, and we worked with Dr. Edward Barnat at the Sandia PRF to carry out these objectives.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Direct in situ measurements of electrical properties of solid–electrolyte interphase on lithium metal anodes

The solid–electrolyte interphase (SEI) critically governs the performance of rechargeable batteries. An ideal SEI is expected to be electrically insulative to prevent persistently parasitic reactions between the electrode and the electrolyte and ionically conductive to facilitate Faradaic reactions of the electrode. However, the true nature of the electrical properties of the SEI remains hitherto unclear due to the lack of a direct characterization method. Here we use in situ bias transmission electron microscopy to directly measure the electrical properties of SEIs formed on copper and lithium substrates. We reveal that SEIs show a voltage-dependent differential conductance. A higher rate of differential conductance induces a thicker SEI with an intricate topographic feature, leading to an inferior Coulombic efficiency and cycling stability in Li||Cu and Li||LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells. Further, our work provides insight into the targeted design of the SEI with desired characteristics towards better battery performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Measurement of electrical characteristics of Ge-based diodes with thermal GeO2 films exposed to controlled humidity conditions

We investigated the impact of the interaction between gas-phase water molecules and thermally oxidized GeO2 on Ge on the performance of metal–oxide–semiconductor (MOS) structures. A vacuum-integrated setup was developed to form MOS diodes with a GeO2/Ge structure that had been exposed to controlled humidity conditions and to subsequently measure their electrical characteristics in situ. The capacitance–voltage (C–V) curves exhibited a significant negative shift, indicating the generation of positive charges at the GeO2/Ge interface when the GeO2 surface was exposed to humidity levels above approximately 1%. According to a previous study using electron spectroscopy, this threshold corresponds to the humidity level at which molecular water begins to grow on a GeO2/Ge structure. It is likely that gas-phase water molecules infiltrating the GeO2 film bind to local OH sites via hydrogen bonding, leading to the formation of positive fixed charges at the GeO2/Ge interface.

Sano, Shuto↗
DOE OSTI2026

ResStock Measure Documentation: Electric Vehicle Adoption With Level 1 Charging

This report is part of a series describing different ResStock (TM) measures. "Measures" refers to energy efficiency retrofits that can be applied to buildings during modeling. This documentation covers the "Electric Vehicle Adoption With Level 1 Charging" measure upgrade methodology and briefly discusses key results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

ResStock Measure Documentation: Electric Vehicle Adoption With Level 2 Charging

This report is part of a series describing different ResStock (TM) measures. "Measures" refers to energy efficiency retrofits that can be applied to buildings during modeling. This documentation covers the "Electric Vehicle Adoption With Level 2 Charging" measure upgrade methodology and briefly discusses key results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

ResStock Measure Documentation: Electric Vehicle Adoption With Level 2 Charging and Demand Flexibility

This report is part of a series describing different ResStock measures. "Measures" refers to energy efficiency retrofits that can be applied to buildings during modeling. This documentation covers the "Electric Vehicle Adoption With Level 2 Charging and Demand Flexibility" measure upgrade methodology and briefly discusses key results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Co-located temperature and electrical resistivity measurements for permafrost mapping, Teller 27, Teller 47 and Kougarok 64, Seward Peninsula, Alaska, late summers of 2018, 2019, 2021, and 2022

This data set contains co-located shallow soil (0.8m below ground level) and electrical resistivity at various depth extracted from Electrical Resistivity Tomography (ERT) measurements. Data were acquired at three watersheds on the southern Seward Peninsula during the late summers of 2018, 2019, 2021, and 2022. The three watersheds are located along the Nome-Teller Highway at mile markers 27 and 47, and along Kougarok Road mile marker 64. The co-located temperature and electrical resistivity data were used to (1) map the spatial extend of near surface permafrost, and (2) for supervised classification of permafrost bodies. This dataset contains .csv, .txt, .srv files and flmd reporting format with data dictionary. Find information about the .srv files at "https://e4d-userguide.pnnl.gov/e4d_guide/elec/e4d_e4d-survey.html". The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Estimating Permafrost Distribution Using Co‐Located Temperature and Electrical Resistivity Measurements

Abstract Assessing the lateral and vertical extent of permafrost is critical to understanding the fate of Arctic ecosystems under climate change. Yet, direct measurements of permafrost distribution and temperature are often limited to a small number of borehole locations. Here, we assess the use of co‐located shallow temperature and electrical resistivity tomography (ERT) measurements to estimate at high‐resolution the distribution of permafrost in three watersheds underlain by discontinuous permafrost. Synthetic modeling shows that co‐located temperature and ERT measurements allow for supervised classification schemes that provide 60% higher accuracy compared to unsupervised methods. Linking resistivity and size of the identified permafrost bodies to surface observations, we show that tall vegetation (>0.5 m) and gentle slopes (<15°) are related to warmer and smaller permafrost bodies, and a more frequent occurrence of taliks.

54 ENVIRONMENTAL SCIENCES↗