Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical breakdown”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Laser-induced electric breakdown in solids

A review is given of recent experimental results on laser-induced electric breakdown in transparent optical solid materials. A fundamental breakdown threshold exists characteristic for each material. The threshold is determined by the same physical process as dc breakdown, namely, avalanche ionization. The dependence of the threshold on laser pulse duration and frequency is consistent with this process. The implication of this breakdown mechanism for laser bulk and surface damage to optical components is discussed. It also determines physical properties of self-focused filaments.

Bloembergen, N.↗
DOE OSTI2016

Comparative study of electrical breakdown properties of deionized water and heavy water under pulsed power conditions

A comparative study of electrical breakdown properties of deionized water (H{sub 2}O) and heavy water (D{sub 2}O) is presented with two different electrode materials (stainless steel (SS) and brass) and polarity (positive and negative) combinations. The pulsed (∼a few tens of nanoseconds) discharges are conducted by applying high voltage (∼a few hundred kV) pulse between two hemisphere electrodes of the same material, spaced 3 mm apart, at room temperature (∼26-28 °C) with the help of Tesla based pulse generator. It is observed that breakdown occurred in heavy water at lesser voltage and in short duration compared to deionized water irrespective of the electrode material and applied voltage polarity chosen. SS electrodes are seen to perform better in terms of the voltage withstanding capacity of the liquid dielectric as compared to brass electrodes. Further, discharges with negative polarity are found to give slightly enhanced discharge breakdown voltage when compared with those with positive polarity. The observations corroborate well with conductivity measurements carried out on original and post-treated liquid samples. An interpretation of the observations is attempted using Fourier transform infrared measurements on original and post-treated liquids as well as in situ emission spectra studies. A yet another important observation from the emission spectra has been that even short (nanosecond) duration discharges result in the formation of a considerable amount of ions injected into the liquid from the electrodes in a similar manner as reported for long (microseconds) discharges. The experimental observations show that deionised water is better suited for high voltage applications and also offer a comparison of the discharge behaviour with different electrodes and polarities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2012

Polarization of the terahertz radiation of uniaxially compressed p germanium at the electrical breakdown of a shallow acceptor impurity

The spectral and polarization investigations of spontaneous terahertz radiation under the conditions of the electrical breakdown of shallow acceptors (gallium) in germanium crystals have been reported. The radiation spectra of crystals uniaxially compressed in the [111] direction at a pressure of about 3 kbar, as well as undeformed crystals, have been measured at T = 5 K using a Fourier spectrometer with step scanning. The polarization of radiation has been estimated for transitions of holes between various states of a shallow acceptor in uniaxially compressed germanium. To identify the observed radiation lines, their experimental energies and polarizations have been compared to the respective calculated values. The spectral lines corresponding to the transitions of holes from the resonance state to the excited states of acceptors have been identified.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

Mass spectra of neutral particles released during electrical breakdown of thin polymer films

A special type of time-of-flight mass spectrometer triggered from the breakdown event was developed to study the composition of the neutral particle flux released during the electrical breakdown of polymer films problem. Charge is fed onto a metal-backed polymer surface by a movable smooth platinum contact. A slowly increasing potential from a high-impedance source is applied to the contact until breakdown occurs. The breakdown characteristics is made similar to those produced by an electron beam charging system operating at similar potentials. The apparatus showed that intense instantaneous fluxes of neutral particles are released from the sites of breakdown events. For Teflon FEP films of 50 and 75 microns thickness the material released consists almost entirely of fluorocarbon fragments, some of them having masses greater than 350 atomic mass units amu, while the material released from a 50 micron Kapton film consists mainly of light hydrocarbons with masses at or below 44 amu, with additional carbon monoxide and carbon dioxide. The apparatus is modified to allow electron beam charging of the samples.

Kendall, B. R. F.↗
DOE OSTI2014

Dependence of vacuum electrical breakdown field and field enhancement factor on the number of apertures drilled in small electrodes

Pre-breakdown current based on field-emission current is regarded as one of factors causing the vacuum electrical breakdown (BD) between the multi-aperture acceleration grids in the JT-60 negative ion source. In this paper, we focused on field enhancement factor β which is a key parameter of field-emission on the cathode. Vacuum BD tests for small-size electrodes drilled different number of apertures were carried out to investigate the β and BD field characteristics in the conditioning process of each electrode. Experimental results revealed that the increase of the number of apertures drilled in the electrode causes the increase of β value, and high β value reduces the dielectric strength of these electrodes. This result demonstrates that flowing field-emission current between the multi-aperture electrodes causes vacuum BD event. (author)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Modeling DC electrical breakdown using a truncated emission spectrum for trapped radiation

Spontaneously emitted radiation from excited atoms can be of principle importance in certain modes of electrical breakdown, especially positive streamers and some regimes of Townsend breakdown. The electrostatic particle-in-cell code Aleph utilizes the direct simulation Monte Carlo method to compute radiation transport. When there is strong radiation trapping, this approach is limited in that it must resolve the timescale associated with self-absorption. This renders many cases computationally intractable as sub-femtosecond time steps can be required to compute solutions for phenomena that occur over nanoseconds or microseconds. For two specific cases which exhibit strong radiation trapping, we find that spontaneous emissions having a frequency near the line center are inactive in the breakdown process and can be neglected. This enables larger time steps and a computational speedup of up to two orders of magnitude is observed. Some considerations for determining the validity of making such an approximation for Townsend breakdown problems and positive ionization wave problems are presented.

Roberds, N. A.↗
NASA NTRS1968

Reducing bubbles in glass coatings improves electrical breakdown strength

Helium reduces bubbles in glass coatings of accelerator grids for ion thrustors. Fusing the coating in a helium atmosphere creates helium bubbles in the glass. In an argon atmosphere, entrapped helium diffuses out of the glass and the bubbles collapse. The resultant coating has a substantially enhanced electrical breakdown strength.

Banks, B.↗
DOE OSTI2023

Electrical breakdown dynamics in an argon bubble submerged in conductive liquid for nanosecond pulsed discharges

Abstract This study delves into the dynamics of cold atmospheric plasma and their interaction within conductive solutions under the unique conditions of nanosecond pulsed discharges (22 kV peak voltage, 10 ns FWHM, 4.5 kV ns −1 rate-of-rise). The research focuses on the electrical response, breakdown, and discharge propagation in an argon bubble, submerged in a NaCl solution of varying conductivity. Full or partial discharges were observed at conductivities of 1.5 µ S cm −1 (deionized water) to 1.6 mS cm −1 , but no breakdown was observed at 11.0 mS cm −1 when reducing the electrode gap. It is demonstrated that at higher conductivity electric breakdown is observed only when the gas bubble comes into direct contact with the electrode and multiple emission nodes were observed at different timescales. These nodes expanded in the central region of the bubble over timescales longer than the initial high-voltage pulse. This work offers a temporal resolution of 2 ns exposure times over the first 30 ns of the initial voltage pulse, and insight into plasma formation over decaying reflected voltage oscillations over 200 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Side-illuminated tip-enhanced Raman study of edge phonon in graphene at the electrical breakdown limit

Nanoscale integration of graphene into a circuit requires a stable performance under high current density. However, the effects of the current density that approach the electronic breakdown limit of graphene are not well understood. We explored the effects of a high current density, close to the electronic breakdown limit of 10 A/cm (∼3.0 × 10{sup 8 }A/cm{sup 2}), on graphene, using tip-enhanced Raman scattering. The results showed that the high current density induces Raman bands at 1456 and 1530 cm{sup −1}, which were assigned to edge-phonon modes originating from zigzag and armchair edges. This led us to conclude that C–C bonds are cleaved due to the high current density, leaving edge structures behind, which were detected through the observation of localized phonons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Direct numerical simulation of a turbulent methane/air flame impinged by a sub-breakdown electric field

Here, the effects of an external electric field on a turbulent methane/air diffusion flame are analyzed in this work using direct numerical simulations. The analyzed configuration consists of a temporally evolving mixing layer of air and a mixture of methane and nitrogen at 1 atm that is impinged by an electric field in the direction normal to the mean mixing plane. The combustion and chemi-ionization reactions involved in the flow are modeled using finite-rate chemistry and a reduced reaction scheme consisting of 26 species and 134 reactions. The mass diffusion and ion-wind effects are modeled using a detailed description of the diffusion coefficients and electric mobilities based on kinetic theory. The presented calculations show that the turbulence generated within the mixing layer is mostly unaffected by the applied electric field for the configuration under exam. In fact, the electric body force is developed away from the mixing region where the flow is uniform. Conversely, the turbulence is able to introduce very high intermittency in the electrically charged species concentration and, consequently, in the electric body force. Such intermittency will constitute a challenge in the future formulation of combustion models that take into account ion-wind effects.

09 BIOMASS FUELS↗
NASA NTRS2003

Electrical Breakdown in a Martian Gas Mixture

The high probability for dust interactions during Martian dust storms and dust devils combined with the cold, dry climate of Mars most likely result in airborne dust that is highly charged. On Earth, potential gradients up to 5 kV/m have been recorded and in some cases resulted in lightning. Although the Martian atmosphere is not conducive to lightning generation, it is widely believed that electrical discharge in the form of a corona occurs. In order to understand the breakdown of gases, Paschen measurements are taken which relate the minimum potential required to spark across a gap between two electrodes. The minimum potential is plotted versus the pressure-distance value for electrodes of a given geometry. For most gases, the potential decreases as the pressure decreases. For CO2, the minimum in the curve happens to be at Mars atmospheric pressures (5-7 mm Hg) for many distances and geometries. However, a very small amount (<0.1%) of mixing gases radically changes the curve, as noted by Leach. Here, we present the first experimental results of a Paschen curve for a Mars gas mixture compared with 100% pure CO2.

Buhler, C. R.↗
NASA NTRS1975

The prevention of electrical breakdown and electrostatic voltage problems in the space shuttle and its payloads. Part 1: Theory and phenomena

An introduction to the theory of corona discharge and electrostatic phenomena is presented. The theory is mainly qualitative so that workers in the field should not have to go outside this manual for an understanding of the relevant phenomena. Some of the problems that may occur with the space shuttle in regard to electrical discharge are discussed.

Whitson, D. W.↗
DOE OSTI2014

Ion manipulation device with electrical breakdown protection

An ion manipulation method and device is disclosed. The device includes a pair of substantially parallel surfaces. An array of inner electrodes is contained within, and extends substantially along the length of, each parallel surface. The device includes a first outer array of electrodes and a second outer array of electrodes. Each outer array of electrodes is positioned on either side of the inner electrodes, and is contained within and extends substantially along the length of each parallel surface. A DC voltage is applied to the first and second outer array of electrodes. A RF voltage, with a superimposed electric field, is applied to the inner electrodes by applying the DC voltages to each electrode. Ions either move between the parallel surfaces within an ion confinement area or along paths in the direction of the electric field, or can be trapped in the ion confinement area. The surfaces are housed in a chamber, and at least one electrically insulative shield is coupled to an inner surface of the chamber for increasing a mean-free-path between two adjacent electrodes in the chamber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗