Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Development of procedures for calculating stiffness and damping properties of elastomers in engineering applications. Part 2: Elastomer characteristics at constant temperature

Dynamic properties of a commerical polybutadiene compound were determined at a constant temperature of 32 C by a forced-vibration resonant mass type of apparatus. The constant thermal state of the elastomer was ensured by keeping the ambient temperature constant and by limiting the power dissipation in the specimen. Experiments were performed with both compression and shear specimens at several preloads (nominal strain varying from 0 to 5 percent), and the results are reported in terms of a complex stiffness as a function of frequency. Very weak frequency dependence is observed and a simple power law type of correlation is shown to represent the data well. Variations in the complex stiffness as a function of preload are also found to be small for both compression and shear specimens.

Gupta, P. K.↗

Dynamic gas temperature measurement system

A gas temperature measurement system with compensated frequency response of 1 KHz and capability to operate in the exhaust of a gas turbine combustor was developed. Environmental guidelines for this measurement are presented, followed by a preliminary design of the selected measurement method. Transient thermal conduction effects were identified as important; a preliminary finite-element conduction model quantified the errors expected by neglecting conduction. A compensation method was developed to account for effects of conduction and convection. This method was verified in analog electrical simulations, and used to compensate dynamic temperature data from a laboratory combustor and a gas turbine engine. Detailed data compensations are presented. Analysis of error sources in the method were done to derive confidence levels for the compensated data.

Elmore, D. L.↗

Measurement of the time-temperature dependent dynamic mechanical properties of boron/aluminum composites

A relatively simple flexural vibration test is developed for accurate measurement of the low-strain dynamic modulus and damping capacity of B/Al composite bar specimens from -200 C to over 500 C. The specimens are prepared from 8-ply unidirectional panels containing 50 volume percent fibers composed of 203-micron commercial boron-on-tungsten fibers. The basic test technique consists of the forced flexural vibration of the composite bar specimens at their two lowest free-free symmetrical resonant modes in a high-vacuum cryostat furnace. Specimen damping is determined from oscilloscope photographs of the free decay obtained after simultaneously removing the resonant drive signal and grounding the vibration-drive electrode. The availability of time-temperature dynamic data coupled with the predictive accuracy of composite theory suggests a future potential for using such data in examining environmental effects on composite macrostructure and microstructure.

Dicarlo, J. A.↗

Further development of the dynamic gas temperature measurement system. Volume 2: Computer program user's manual

The Dynamic Gas Temperature Measurement System compensation software accepts digitized data from two different diameter thermocouples and computes a compensated frequency response spectrum for one of the thermocouples. Detailed discussions of the physical system, analytical model, and computer software are presented in this volume and in Volume 1 of this report under Task 3. Computer program software restrictions and test cases are also presented. Compensated and uncompensated data may be presented in either the time or frequency domain. Time domain data are presented as instantaneous temperature vs time. Frequency domain data may be presented in several forms such as power spectral density vs frequency.

Stocks, Dana R.↗

Dynamic gas temperature measurements using a personal computer for data acquisition and reduction

This report describes a dynamic gas temperature measurement system. It has frequency response to 1000 Hz, and can be used to measure temperatures in hot, high pressure, high velocity flows. A personal computer is used for collecting and processing data, which results in a much shorter wait for results than previously. The data collection process and the user interface are described in detail. The changes made in transporting the software from a mainframe to a personal computer are described in appendices, as is the overall theory of operation.

Fralick, Gustave C.↗

Middle Atmosphere Temperature and Dynamics as Revealed from D-region Observations

The concept of so-called meteorological control of the ionospheric D-region is presently undergoing development. According to this concept the electron concentration in this region is governed not only by solar and geomagnetic parameters but strongly depends on the temperature and dynamical regime of the mesosphere and stratosphere. How this connection between D-region and meteorological parameters can be used to obtain some information about middle atmosphere temperature and dynamics is examined. The essential points of the meteorological control concept are reviewed and the influence of turbulence on nitric oxide distribution and thus the ion production rate is discussed.

Danilov, A. D.↗

The composition, structure, temperature and dynamics of the upper thermosphere in the polar regions during October to December 1981

Observational data obtained by the Dynamics Explorer-2 (DE-2) spacecraft were compared with global model simulations in order to study the composition, structure, temperature, and dynamics of the upper thermosphere in polar regions during the period October-December 1981. A UCL three-dimensional model was used to simulate the seasonal, diurnal, and geomagnetic response of the neutral thermosphere and to follow the major features of the solar and geomagnetic inputs during the late 1981 period. Overall agreement was obtained between the simulations and the DE-2 data for thermospheric wind structure at high latitudes, and for the combined thermal and compositional structure in both hemispheres. Computer-generated line drawings of the variations in thermospheric structure are given, as well as a series of color graphic illustrations of the DE-2 data.

Rees, D.↗

Titan's atmosphere - Temperature and dynamics

In the lower atmosphere of Titan IR brightness temperatures exhibit meridional contrast less than approximately 3 K. Seasonal variations are absent because of the large radiative time constant. In the upper stratosphere meridional contrasts are approximately 20 K, consistent with 100 m/s cyclostrophic zonal winds, and the radiative time constant is short, implying a large seasonal variation in the temperature and wind field. The absence of longitudinal thermal structure implies that zonally symmetric flows effect the meridional transport of heat. A simple model yields meridional velocities approximately 0.04 cm/s and vertical eddy viscosities approximately 1,000 sq cm/s in the lower troposphere, and meridional velocities approximately 5 cm/s in the upper stratosphere.

Flasar, F. M.↗

Measurement of the time-temperature dependent dynamic mechanical properties of boron/aluminum composites

A flexural vibration test and associated equipment were developed to accurately measure the low strain dynamic modulus and damping of composite materials from -200 C to over 500 C. The basic test method involves the forced vibration of composite bars at their resonant free-free flexural modes in a high vacuum cryostat furnace. The accuracy of these expressions and the flexural test was verified by dynamic moduli and damping capacity measurements on 50 fiber volume percent boron/aluminum (B/Al) composites vibrating near 2000 Hz. The phase results were summarized to permit predictions of the B/Al dynamic behavior as a function of frequency, temperature, and fiber volume fraction.

Dicarlo, J. A.↗

Effects of loading rate and temperature on dynamic fracture of ceramic matrix composites

A hybrid experimental-numerical procedure was used to determine the dynamic fracture initiation toughnesses and the dynamic stress intensity factors of alumina, TiB2-particulate/SiC-matrix, and SiC(w)/Al2O3-matrix composites at room and elevated temperatures under static and impact loadings. The dynamic fracture initiation toughnesses at room and elevated temperatures were greater than the corresponding static fracture toughness. The crack velocity versus the dynamic stress intensity factor relations showed minor differences due to temperature changes but significant differences due to the change in loading rates.

Yang, K. H.↗

Prospecting Jupiter in the Thermal Infrared: Temperatures and Dynamics

We present for the first time detailed maps of charged temperatures and winds in Jupiter's stratosphere, from infrared spectra acquired during the Cassini swingby of Jupiter. The maps reveal a high-altitude equatorial jet 1140 m s-', as strong as the cloud-top winds. It may result from wave forcing and be analogous to the quasi-biennial oscillation in the earth's stratosphere. The maps give the best characterization of the motions of stratospheric waves, and they better define the vertical penetration of the auroral hot spots into the stratosphere.

Flasar, F. M.↗

A first look at atmospheric dynamics and temperature variations on Titan.

Pollack (1973) has used a radiative equilibrium model to match radiometric data for Titan and infers the atmospheric mass, composition, opacity, and gross vertical thermal structure. These results are used to estimate the atmospheric temperature variations by means of scaling analysis, taking into account dynamics both for a baroclinic wave regime and for an axially symmetric circulation regime. Horizontal temperature variations of the atmosphere and surface are found to be very small, and the circulation is found to be weak and probably axially symmetric. The small temperature variations appear to preclude the storage of volatiles in polar caps, so that the present atmospheric methane content may be due to a balance between outgassing and photodissociation.

Leovy, C. B.↗

Electronic Transport through Self Assembled Thiol Molecules: Effect of Monolayer Order, Dynamics and Temperature

We present the charge transport and tunneling conductance of self assembled organic thiol molecules and discuss the influence of order and dynamics in the monolayer on the transport behavior and the effect of temperature. Conjugated thiol molecular wires and organometals such as terpyridine metal complexes provide a new platform for molecular electronic devices and we study their self assembly on Au(111) substrates by the scanning tunneling microscope. Determining the organization of the molecule and the ability to control the nature of its interface with the substrate is important for reliable performance of the molecular electronic devices. By concurrent scanning tunneling microscopy and spectroscopy studies on SAMs formed from oligo (phenelyne ethynelyne) monolayers with and without molecular order, we show that packing and order determine the response of a self assembled monolayer (SAM) to competing interactions. Molecular resolution STM imaging in vacuum shows that the OPES adopt an imcommensurate SAM structure on Au(111) with a rectangular unit cell. Tunneling spectroscopic measurements were performed on the SAM as a function of junction resistance. STS results show that the I-Vs are non linear and asymmetric due to the inherent asymmetry in the molecular structure, with larger currents at negative sample biases. The asymmetry increases with increasing junction resistance due to the asymmetry in the coupling to the leads. This is brought out clearly in the differential conductance, which also shows a gap at the Fermi level. We also studied the effect of order and dynamics in the monolayer on the charge transport and found that competing forces between the electric field, intermolecular interactions, tip-molecule physisorption and substrate-molecule chemisorption impact the transport measurements and its reliability and that the presence of molecular order is very important for reproducible transport measurements. Thus while developing new electronic platforms based on molecules, it is important to have a good control of the molecule-substrate interface, for the devices to perform reliably. While such a control would minimize fluctuations and dynamics in the ensemble, the real challenge is to develop device architectures that are tolerant to fluctuations, since they cannot be totally eliminated in these low dimensional soft systems. Results of temperature dependent STS measurements will also be discussed.

Dholakia, Geetha↗

Dynamic, High-Temperature, Flexible Seals

Dynamic, flexible ceramic seals developed for use at high temperatures in high-performance, variable-geometry, hypersonic airplane engines. Stacked ceramic wafers pressed against stationary sidewall by pressure in one or more metal bellows. Seals also used in hypersonic engines, two-dimensional convergent/divergent and vectored-thrust exhaust nozzles, airframes of reentry vehicles, casings of rocket motors furnaces, and other applications.

Steinetz, Bruce M.↗

Effect of Preloading on Fatigue Strength in Dynamic Fatigue Testing of Ceramic Materials at Elevated Temperatures

Previously derived solutions of fatigue strength as a function of preloading were verified by applying preloads to elevated temperature dynamic fatigue tests of 96 wt% alumina at 1000 C and NC 132 silicon nitride at 1100 C. The technique was found very useful in identification and control of the governing failure mechanism when multiple failure mechanisms, such as slow crack growth, creep and oxidation occurred simultaneously at elevated temperatures.

Choi, Sung R.↗

Cusp altitudinal electron temperature gradient - Dynamics Explorer 2 implications for heating mechanisms

Curtis et al. (1982) have shown that the levels of wave turbulence observed by Dynamics Explorer 2 (DE 2) are too low by several orders of magnitude to explain the high temperatures of the polar cusp ionosphere in terms of local deposition of energy. The low altitude plasma instrument (LAPI) showed high levels of superthermal electron fluxes. The present investigation has the objective to examine the arising questions more quantitatively by using the DE 2 electron temperature and superthermal electron flux measurements. It is shown that on the basis of DE 2 observations in the polar cusp, a consistent picture can be drawn regarding the ionospheric electron heating process. It is pointed out that the heating involves the generation of plasma waves by field-aligned electron beams of magnetosheath origin.

Curtis, S. A.↗

Preliminary results from the Pioneer Venus Orbiter infrared radiometer - Temperature and dynamics in the upper atmosphere

Data from the infrared radiometer aboard the Pioneer Venus Orbiter are examined and interpreted within the context of zonally averaged temperatures and circulation in the upper atmosphere of Venus. Surprisingly, the northern hemisphere pole is warmer than the equator throughout most of the region sampled. This implies both a rapid decrease with height of the 100 m/s cloud top winds previously observed, and the probable existence of large (50 to 100 m/s) meridional winds.

Elson, L. S.↗

Oxidation behavior of TD-NiCr in a dynamic high temperature environment

The oxidation behavior of TD-NiCr has been studied in static and high-speed flowing air environments at 1100 and 1200 C. It has been found that the stable oxide morphologies formed on the specimens exposed to the static and dynamic environments were markedly different. The faceted crystal morphology characteristic of static oxidation was found to be unstable under high-temperature, high-speed flow conditions and was quickly replaced by a porous NiO 'mushroom' type structure. Also, it was found that the rate of formation of CrO3 from Cr2O3 was greatly enhanced by high gas velocity conditions. The stability of Cr2-O3 was found to be greatly improved by the presence of an outer NiO layer, even though the NiO layer was very porous. An oxidation model is proposed to explain the observed microstructures and overall oxidation behavior of TD-NiCr alloys.

Tenney, D. R.↗