Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic instructions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Structure and Dynamics of the Quiet Solar Chromosphere

The grant supported research on the structure of the quiet, nonmagnetic chromosphere and on wave excitation and propagation in both the nonmagnetic chromosphere and the magnetic network. The work on the structure of the chromosphere culminated in the recognition that between two competing views of the solar chromosphere, older models by Avrett and collaborators (referred to as VAL) and the newer, dynamical model by Carlsson & Stein (referred to as CS), the clear decision is in favor of the older models, and this in spite of the evident lack of physics, which does not include wave motion and oscillations. The contrast between the static VAL models and the dynamical CS model can be stated most succinctly by comparing the temperature variation implied by the VAL models and the temperature fluctuations of the CS model, which are, respectively, of the order of 10% for the VAL model (at heights where hydrogen is 50% ionized) and a factor of 10 (at the upper boundary of their chromospheric model). The huge fluctuations of the CS model have never been observed, whereas the smaller temperature variations of the VAL models are consistent with ground-based and space-based observations. While it should be obvious which model describes the Sun and which one fails, the case is far from settled in the minds of solar physicists. Thus, much educational work remains to be done and, of course, more research to develop arguments that make the case more convincing. The research on waves and oscillations has been based on a unified theory of excitation of acoustic waves in the field-free atmosphere and of transverse and longitudinal waves in magnetic flux tubes located in the magnetic network by noting, first, that impulsive excitation of all these waves in gravitationally stratified media leads to oscillations at the respective cutoff frequencies and, second, that the observed oscillation frequencies in the nonmagnetic and magnetic parts of the chromosphere match corresponding cutoff frequencies in the upper solar photosphere. The dynamical simulations by Carlsson and Stein have been most instructive and of fundamental importance for understanding wave propagation in a stratified medium by their "flaws", the most important of which is an intensity excess at the H2v emission peak in the H line of Ca II, which is surprising since the observed intensity should have been an upper limit to the simulated intensity. The only plausible explanation for a predicted intensity that is higher than observed is that energy is spread horizontally in upward propagation in the Sun, but not in the plane-wave modeling of CS (as well as by almost everyone else). Investigations of the horizontal size of the region disturbed by the upward-propagating shock in the acoustic-wave propagation implies that the waves in H2v bright-point oscillations emanate from a point source with a diameter corresponding to the width of an intergranular lane, about 100 km, and reach a size of about 4000 km in the upper layers of the chromosphere. Linear, analytic modeling of waves emanating from a point source in a stratified atmosphere shows that the upward-expanding propagation channel does not have sharp boundaries and that the shape of the wave front depends on the order of the wave behind the initial pulse. Otherwise, the behavior of the linear waves resembles that of the nonlinear shock waves observed in the Sun. Research that needs to be done to firm up the conclusions reached above concerns the numerical simulations of nonlinear waves and oscillations in a three-dimensional stratified atmosphere with impulsive excitation, and observations linking directly the horizontal size of the disturbed area in upward propagation to individual waves.

Kalkofen, Wolfgang↗

A computer program for the geometrically nonlinear static and dynamic analysis of arbitrarily loaded shells of revolution, theory and users manual

A digital computer program known as SATANS (static and transient analysis, nonlinear, shells) for the geometrically nonlinear static and dynamic response of arbitrarily loaded shells of revolution is presented. Instructions for the preparation of the input data cards and other information necessary for the operation of the program are described in detail and two sample problems are included. The governing partial differential equations are based upon Sanders' nonlinear thin shell theory for the conditions of small strains and moderately small rotations. The governing equations are reduced to uncoupled sets of four linear, second order, partial differential equations in the meridional and time coordinates by expanding the dependent variables in a Fourier sine or cosine series in the circumferential coordinate and treating the nonlinear modal coupling terms as pseudo loads. The derivatives with respect to the meridional coordinate are approximated by central finite differences, and the displacement accelerations are approximated by the implicit Houbolt backward difference scheme with a constant time interval. The boundaries of the shell may be closed, free, fixed, or elastically restrained. The program is coded in the FORTRAN 4 language and is dimensioned to allow a maximum of 10 arbitrary Fourier harmonics and a maximum product of the total number of meridional stations and the total number of Fourier harmonics of 200. The program requires 155,000 bytes of core storage.

Ball, R. E.↗

DORCA 2 computer program. Volume 3: Program listing

A program listing for the Dynamic Operational Requirements and Cost Analysis Program is presented. Detailed instructions for the computer programming involved in space mission planning and project requirements are developed.

Carey, J. B.↗

Fluid dynamics computer programs for NERVA turbopump

During the design of the NERVA turbopump, numerous computer programs were developed for the analyses of fluid dynamic problems within the machine. Program descriptions, example cases, users instructions, and listings for the majority of these programs are presented.

Brunner, J. J.↗

Application of concurrent processing to structural dynamic response computations

Described are the experiences gained from solving for the dynamic response of two simple structures on an experimental Multiple Instruction Multiple Data (MIMD) computer called the finite element machine. Introduced are MIMD computing concepts, describing how the concurrent algorithmic techniques implemented and giving results for the two example problems. The results show computational speedups of up to 7.83 using eight of the finite element machine processors and indicate that significant computational speedups are possible for large order structural computations.

Ransom, J.↗

Spatial considerations for instructional development in a virtual environment

In this paper we discuss spatial considerations for instructional development in a virtual environment. For both the instructional developer and the student, the important spatial criteria are perspective, orientation, scale, level of visual detail, and granularity of simulation. Developing a representation that allows an instructional developer to specify spatial criteria and enables intelligent agents to reason about a given instructional problem is of paramount importance to the success of instruction delivered in a virtual environment, especially one that supports dynamic exploration or spans more than one scale of operation.

Mccarthy, Laurie↗

Plans and Example Results for the 2nd AIAA Aeroelastic Prediction Workshop

This paper summarizes the plans for the second AIAA Aeroelastic Prediction Workshop. The workshop is designed to assess the state-of-the-art of computational methods for predicting unsteady flow fields and aeroelastic response. The goals are to provide an impartial forum to evaluate the effectiveness of existing computer codes and modeling techniques, and to identify computational and experimental areas needing additional research and development. This paper provides guidelines and instructions for participants including the computational aerodynamic model, the structural dynamic properties, the experimental comparison data and the expected output data from simulations. The Benchmark Supercritical Wing (BSCW) has been chosen as the configuration for this workshop. The analyses to be performed will include aeroelastic flutter solutions of the wing mounted on a pitch-and-plunge apparatus.

Heeg, Jennifer↗

Coupled rotor/airframe vibration analysis program manual manual. Volume 1: User's and programmer's instructions

user instruction and software descriptions for the base program of the coupled rotor/airframe vibration analysis are provided. The functional capabilities and procedures for running the program are provided. Interfaces with external programs are discussed. The procedure of synthesizing a dynamic system and the various solution methods are described. Input data and output results are presented. Detailed information is provided on the program structure. Sample test case results for five representative dynamic configurations are provided and discussed. System response are plotted to demonstrate the plots capabilities available. Instructions to install and execute SIMVIB on the CDC computer system are provided.

Cassarino, S.↗

Attitude Design for the LADEE Mission

The Lunar Atmosphere and Dust Environment Explorer (LADEE) satellite successfully completed its 148-day science investigation in a low-altitude, near-equatorial lunar orbit on April 18, 2014. The LADEE spacecraft was built, managed and operated by NASA's Ames Research Center (ARC). The Mission Operations Center (MOC) was located at Ames and was responsible for activity planning, command sequencing, trajectory and attitude design, orbit determination, and spacecraft operations. The Science Operations Center (SOC) was located at Goddard Space Flight Center and was responsible for science planning, data archiving and distribution. This paper details attitude design and operations support for the LADEE mission. LADEE's attitude design was shaped by a wide range of instrument pointing requirements that necessitated regular excursions from the baseline one revolution per orbit "Ram" attitude. Such attitude excursions were constrained by a number of flight rules levied to protect instruments from the Sun, avoid geometries that would result in simultaneous occlusion of LADEE's two star tracker heads, and maintain the spacecraft within its thermal and power operating limits. To satisfy LADEE's many attitude requirements and constraints, a set of rules and conventions was adopted to manage the complexity of this design challenge and facilitate the automation of ground software that generated pointing commands spanning multiple days of operations at a time. The resulting LADEE Flight Dynamics System (FDS) that was developed used Visual Basic scripts that generated instructions to AGI's Satellite Tool Kit (STK) in order to derive quaternion commands at regular intervals that satisfied LADEE's pointing requirements. These scripts relied heavily on the powerful "align and constrain" capability of STK's attitude module to construct LADEE's attitude profiles and the slews to get there. A description of the scripts and the attitude modeling they embodied is provided. One particular challenge analysts faced was in the design of LADEE maneuver attitudes. A flight rule requiring pre-maneuver verification of in-flight maneuver conditions by ground operators prior to burn execution resulted in the need to accommodate long periods in the maneuver attitude. This in turn complicated efforts to satisfy star tracker interference and communication constraints in lunar orbit. In response to this challenge, a graphical method was developed and used to survey candidate rotation angles about the thrust vector. This survey method is described and an example of its use on a particular LADEE maneuver is discussed. Finally, the software and methodology used to satisfy LADEE's attitude requirements are also discussed in the context of LADEE's overall activity planning effort. In particular, the way in which strategic schedules of instrument and engineering activities were translated into actual attitude profiles at the tactical level, then converted into precise quaternion commands to achieve those pointing goals is explained. In order to reduce the risk of time-consuming re-planning efforts, this process included the generation of long-term projections of constraint violation predictions for individual attitude profiles that could be used to establish keep-out time-frames for particular attitude profiles. The challenges experienced and overall efficacy of both the overall LADEE ground system and the attitude components of the Flight Dynamics System in meeting LADEE's varied pointing requirements are discussed.

LADEE↗

High-Speed Recording of Test Data on Hard Disks

Disk Recording System (DRS) is a systems-integration computer program for a direct-to-disk (DTD) high-speed data acquisition system (HDAS) that records rocket-engine test data. The HDAS consists partly of equipment originally designed for recording the data on tapes. The tape recorders were replaced with hard-disk drives, necessitating the development of DRS to provide an operating environment that ties two computers, a set of five DTD recorders, and signal-processing circuits from the original tape-recording version of the HDAS into one working system. DRS includes three subsystems: (1) one that generates a graphical user interface (GUI), on one of the computers, that serves as a main control panel; (2) one that generates a GUI, on the other computer, that serves as a remote control panel; and (3) a data-processing subsystem that performs tasks on the DTD recorders according to instructions sent from the main control panel. The software affords capabilities for dynamic configuration to record single or multiple channels from a remote source, remote starting and stopping of the recorders, indexing to prevent overwriting of data, and production of filtered frequency data from an original time-series data file.

Lagarde, Paul M., Jr.↗

The Look-point Aircraft Coordinate Estimator (LACE) and potential applications

A look-point aircraft coordinate estimator (LACE) consisting of a windshield runway symbol projector, pilot input controls, microprocessor, and eye-alignment device is described. The estimator is used by a pilot to determine his aircraft's position relative to a runway or other visible terrain or target. The pilot initially superimposes and then corrects the superposition of the runway symbol over the runway during approach during periods when the runway is visible. Using the pilot's inputs the microprocessor calculates the position of the aircraft in terms of runway coordinates, then generates an approach trajectory and issues instructions to an autopilot. The microprocessor contains a model of the aircraft's dynamics and calculates a theoretical aircraft trajectory. The theoretical position of the aircraft is then used to drive the runway symbol, with the pilot's input being additive. The system thus acts as an aid in making low visibility approaches and landings when only an occasional glimpse of the runway is possible and no ground referenced landing systems are available. The system can also be used as an independent landing monitor for ground referenced landing systems.

Anderson, W. W.↗

Multiple grid problems on concurrent-processing computers

Three computer codes were studied which make use of concurrent processing computer architectures in computational fluid dynamics (CFD). The three parallel codes were tested on a two processor multiple-instruction/multiple-data (MIMD) facility at NASA Ames Research Center, and are suggested for efficient parallel computations. The first code is a well-known program which makes use of the Beam and Warming, implicit, approximate factored algorithm. This study demonstrates the parallelism found in a well-known scheme and it achieved speedups exceeding 1.9 on the two processor MIMD test facility. The second code studied made use of an embedded grid scheme which is used to solve problems having complex geometries. The particular application for this study considered an airfoil/flap geometry in an incompressible flow. The scheme eliminates some of the inherent difficulties found in adapting approximate factorization techniques onto MIMD machines and allows the use of chaotic relaxation and asynchronous iteration techniques. The third code studied is an application of overset grids to a supersonic blunt body problem. The code addresses the difficulties encountered when using embedded grids on a compressible, and therefore nonlinear, problem. The complex numerical boundary system associated with overset grids is discussed and several boundary schemes are suggested. A boundary scheme based on the method of characteristics achieved the best results.

Eberhardt, D. S.↗

Dynamic-pressure regulator

Computerized pressure regulator controls gas pressure in fixed volume container, increasing, maintaining, and decreasing pressure according to programmed instructions. Controller is adaptable to any volume size or shape, and pressure variation may be synchronized.

Walker, R. R.↗

Parallel processors and nonlinear structural dynamics algorithms and software

The adaptation of a finite element program with explicit time integration to a massively parallel SIMD (single instruction multiple data) computer, the CONNECTION Machine is described. The adaptation required the development of a new algorithm, called the exchange algorithm, in which all nodal variables are allocated to the element with an exchange of nodal forces at each time step. The architectural and C* programming language features of the CONNECTION Machine are also summarized. Various alternate data structures and associated algorithms for nonlinear finite element analysis are discussed and compared. Results are presented which demonstrate that the CONNECTION Machine is capable of outperforming the CRAY XMP/14.

Belytschko, Ted↗

Rutger's CAM2000 chip architecture

This report describes the architecture and instruction set of the Rutgers CAM2000 memory chip. The CAM2000 combines features of Associative Processing (AP), Content Addressable Memory (CAM), and Dynamic Random Access Memory (DRAM) in a single chip package that is not only DRAM compatible but capable of applying simple massively parallel operations to memory. This document reflects the current status of the CAM2000 architecture and is continually updated to reflect the current state of the architecture and instruction set.

Smith, Donald E.↗

Free Body Dynamics of a Spinning Cylinder With Planar Restraint (a.k.a. Barrel of Fun)

The dynamic motion of a cylinder on a floor or hard surface is both entertaining and instructive. With maintenance torques, motion can be sustained and controlled as illustrated in a video clip that can be viewed in the PDF file of this document. The analysis of such a cylinder with and without end caps is burned on rotation about its center of mass and restrained by a plane normal to the axis passing through its center of mass at an angle alpha. For small values of alpha, the governing equations are simplified, and for symmetric bodies, stability requires rotation greater than [2 square root of(JWL*)]/J(sub X), where J is the transverse mass moment of inertia, W is the weight of the cylinder, L* is the cylinder length from the base to the center of mass, and JX is the mass moment of inertia about the longitudinal axis OX of the barrel. Comparisons to data are made and some applications are discussed.

Moraru, Laurentiu↗

Comparison of Computerized Sway Referencing and Standing on a Compliant Surface

Background: By removing vision and altering somatosensory inputs, we can examine the contributions of the vestibular system on balance control. Computerized Dynamic Posturography (CDP) systems accomplish this by using a dynamic plate that moves in proportion to the sway of the subject. A potential alternative to CDP is the use of a compliant foam surface. The goal of this study was to compare postural sway during each condition. Methods: Thirty-two healthy subjects (16 male and 16 female) were tested on a Equitest computerized posturography system and on a 5 inch thick block of foam (NeuroCom International; Clackamas, OR). Subjects performed three trials with their head erect and five trials with dynamic head tilts ( 20 at 0.33Hz) in the anterior-posterior (AP) plane. Subjects were instructed to stand quietly with their arms folded and eyes closed for each trial lasting 20 seconds. The sway in both AP and medial-lateral (ML) planes was calculated for each trial, as well as the total sway path length. Results: In general, AP sway tended to be greater on the Equitest than on foam and greater during the head movement trials than the head erect. The ML sway was consistently higher on foam and did not vary between head erect and moving conditions. Sway path length was consistently greater for head erect trials on foam and tended to be greater for head movement trials on the Equitest. The addition of head movements increases AP sway and the total path length. Conclusions: Based on the increase of sway in the ML direction, it is important to quantify sway in all directions when on a compliant foam surface.

Dean, S. Lance↗

Blade loss transient dynamics analysis. Volume 3: User's manual for TETRA program

The users manual for TETRA contains program logic, flow charts, error messages, input sheets, modeling instructions, option descriptions, input variable descriptions, and demonstration problems. The process of obtaining a NASTRAN 17.5 generated modal input file for TETRA is also described with a worked sample.

Black, G. R.↗