Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Robust Distributed State Estimator for Interconnected Transmission and Distribution Networks (Final Report RPPR-1)

This project’s objective is to develop a combined transmission and distribution state estimator which accounts for very large system size and model complexity (by way of distributing the computations) and large number of solar PV units connected to the distribution system on multiple feeders. The project not only provides a robust formulation and solution to this problem but also tests the solution by implementing it on a well-established large utility system. It introduces several improvements with respect to the state of the art in existing state estimation software: (a) The developed state estimator (SE) allows robust and accurate monitoring of bidirectional flows in distribution systems which result due to the distributed energy sources which are not observable and thus not incorporated in generation dispatch; (b) Large utility systems with tens of thousands of transmission buses and hundreds of thousands of distribution nodes are difficult to model as a single integrated system. This shortcoming is addressed by developing a “scalable distributed computational framework” which allows splitting the ultra large system models into several small subsystems and coordinating their solution by a robust and practical state estimation formulation; (c) Measurement errors irrespective of their locations are detected and removed by the developed state estimator. Historically, transmission and distribution systems were analyzed and operated as two independent systems. Given the non-transposed short feeder sections, unevenly loaded phases, strictly radial configuration and unidirectional power flows in the absence of remote generation, distribution system analysis was customized to account for these characteristics. However, some of these assumptions are no longer valid (non-radial configuration, bidirectional power flows) and thus distribution system analysis should be revisited. Furthermore, in the past, the interaction between the transmission and distribution systems was quite passive, where distribution substations were modeled as lumped loads in the transmission system model. With substantial generation injected by renewable generation located in the distribution systems, such modeling will no longer be accurate. The developed state estimator facilitates proper monitoring of the interactions between the transmission and distribution systems and enables smart dispatch of these units which are made observable by the state estimator.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Resilient Distributed Field Estimation

We study resilient distributed field estimation under measurement attacks. A network of agents or devices measures a large, spatially distributed physical field parameter. An adversary arbitrarily manipulates the measurements of some of the agents. Each agent's goal is to process its measurements and information received from its neighbors to estimate only a few specific components of the field. Here, we present SAFE, the saturating adaptive field estimator, a consensus + innovations distributed field estimator that is resilient to measurement attacks. Under sufficient conditions on the compromised measurement streams, the physical coupling between the field and the agents' measurements, and the connectivity of the cyber communication network, SAFE guarantees that each agent's estimate converges almost surely to the true value of the components of the parameter in which the agent is interested. Finally, we illustrate the performance of SAFE through numerical examples.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1990

Distributed parameter estimation for large beam-like structures for general inputs

In this paper, maximum likelihood estimation for distributed parameter models of large flexible structures has been formulated. Distributed parameter models involve far fewer unknown parameters than independent modal characteristics of finite element models. The closed-form solutions for the partial differential equations with general forced inputs have been derived. The closed-form expressions of the sensitivity functions lead to highly efficient algorithms for analyzing ground or on-orbit test results. Numerical simulations with impulse and step inputs to the NASA Mini-MAST trust have been demonstrated. The estimations of modal properties involve its longitudinal elongation modes, lateral bending modes and torsional modes. The results show that distributed parameter models are promising in the parameter estimation of large flexible structures.

Shen, Ji-Yao↗
DOE OSTI2020

Enhanced Tensor Completion Based Approaches for State Estimation in Distribution Systems

Grid state estimation is essential for effective control and management of distribution systems. While weighted least squares has been the conventional method for state estimation, sparsity-aware methods have become popular due to their superior performance with limited data. Matrix completion and compressed sensing-based state estimation approaches exploit the underlying smoothness in the state variables. However, classic matrix completion methods do not take into account the temporal correlation of system states. Compressed sensing methods, on the other hand, require an appropriate choice of sparsifying basis that may not be easy to identify. This paper proposes a blocktensor completion based framework which uses an alternative approach to estimate voltage phasor, power injections and branch currents. This approach utilizes the temporal correlation of the system states in a tensor trace-norm minimization formulation with power flow equations as constraints. Herein, feature scaling is introduced in the problem formulation to benefit from the improved sensitivity of the tensor trace norm to the matrix columns in the scaled unfoldings of the tensor. Weighted tensor norm is utilized to exploit the structures of the different unfoldings of the state measurement tensor to improve the voltage estimation. The estimation accuracy is further improved by alternatively estimating the tensor columns and increasing the available data at each stage in the tensor completion process. The proposed methods are evaluated on the IEEE-33, 37 test systems and a 100- node test system. The proposed methods are shown to provide significant performance gains relative to the classic matrix and tensor completion based approaches.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Multi-Area Model-Free State Estimation via Distributed Tensor Decomposition

This paper proposes a model-free method for distribution system state estimation based on tensor completion using canonical polyadic decomposition. In particular, we consider a setting where the network is divided into multiple areas. The measured physical quantities at buses located in the same area are processed by an area controller. A third-order tensor is constructed to collect these measured quantities. The measurements are analyzed locally to recover the full state information of the network. A closed-form iterative algorithm based on the alternating direction method of multipliers is developed to obtain the low-rank factors of the whole network state tensor where information exchange happens only between neighboring areas. To demonstrate the efficacy of the developed algorithm, numerical simulations are carried out using an IEEE test system.

alternating direction method of multipliers↗
NASA NTRS1982

Estimation of distributed parameter systems

The estimation and control of large flexible space structures pose significant new control technology problems. One major problem area is the closed-loop stability of a structure that has been modeled with truncated modal dynamics. Stability problems arise due to the control design process beginning with a deficient model. This work provides the necessary conditions for the optimal estimation of infinite dimensional (partial-differential equation) systems. This approach can be particularly useful for initial control studies and for gaining considerable insight into what the optimal estimator for a truly infinite dimensional system should be. A detailed example of the estimation of the continuous shape of a string in tension is presented.

Schaechter, D. B.↗
NASA NTRS1987

Time-dependent approximation schemes for some problems of parameter estimation in distributed systems

A parameter estimation method that can be used to estimate functional parameters in delay differential equations and moving boundary problems is discussed. In either problem, the original model equation (which is infinite-dimensional) is approximated by a system of ordinary differential equations that can be solved numerically in an efficient way. The approximation scheme is based on time-dependent spline elements. For the delay equation with time-varying delay, convergence results are presented that indicate the estimates obtained using the approximating system. Numerical test examples converge in some sense to a best-fit parameter for the original system are included by means of which time-varying and state-dependent delays and a time-varying diffusion coefficient in a one-phase, one-dimensional Stefan problem are estimated.

Murphy, K. A.↗
DOE OSTI2021

Stochastic Gradient-Based Distributed Bayesian Estimation in Cooperative Sensor Networks

Distributed Bayesian inference provides a full quantification of uncertainty offering numerous advantages over point estimates that autonomous sensor networks are able to exploit. However, fully-decentralized Bayesian inference often requires large communication overheads and low network latency, resources that are not typically available in practical applications. In this paper, we propose a decentralized Bayesian inference approach based on stochastic gradient Langevin dynamics, which produces full posterior distributions at each of the nodes with significantly lower communication overhead. We provide analytical results on convergence of the proposed distributed algorithm to the centralized posterior, under typical network constraints. Finally, we also provide extensive simulation results to demonstrate the validity of the proposed approach.

42 ENGINEERING↗
NASA NTRS2011

Distributed Damage Estimation for Prognostics based on Structural Model Decomposition

Model-based prognostics approaches capture system knowledge in the form of physics-based models of components, and how they fail. These methods consist of a damage estimation phase, in which the health state of a component is estimated, and a prediction phase, in which the health state is projected forward in time to determine end of life. However, the damage estimation problem is often multi-dimensional and computationally intensive. We propose a model decomposition approach adapted from the diagnosis community, called possible conflicts, in order to both improve the computational efficiency of damage estimation, and formulate a damage estimation approach that is inherently distributed. Local state estimates are combined into a global state estimate from which prediction is performed. Using a centrifugal pump as a case study, we perform a number of simulation-based experiments to demonstrate the approach.

Daigle, Matthew↗
NASA NTRS1991

Likelihood estimation for distributed parameter models for NASA Mini-MAST truss

A maximum likelihood estimation for distributed parameter models of large flexible structures was formulated. Distributed parameter models involve far fewer unknown parameters than independent modal characteristics or finite element models. The closed form solutions for the partial differential equations with corresponding boundary conditions were derived. The closed-form expressions of sensitivity functions led to highly efficient algorithms for analyzing ground or on-orbit test results. For an illustration of this approach, experimental data of the NASA Mini-MAST truss was used. The estimations of modal properties involve lateral bending modes and torsional modes. The results show that distributed parameter models are promising in the parameter estimation of large flexible structures.

Shen, Ji-Yao↗
NASA NTRS1992

Likelihood estimation for distributed parameter models of large beam-like structures

A maximum likelihood estimation for distributed parameter models of large flexible structures was formulated. Distributed parameter models involve far fewer unknown parameters than independent modal characteristics or finite element models. The closed form solutions for the partial differential equations with corresponding boundary conditions were derived. The closed-form expressions of sensitivity functions led to highly efficient algorithms for analyzing ground or on-orbit test results. For an illustration of this approach, experimental data of the NASA Mini-Mast truss was used. The estimations of modal properties involve lateral bending modes and torsional modes. The results show that distributed parameter models are promising in the parameter estimation of large flexible structures.

Shen, J.-Y.↗
NASA NTRS2008

Observability and Estimation of Distributed Space Systems via Local Information-Exchange Networks

In this work, we develop an approach to formation estimation by explicitly characterizing formation's system-theoretic attributes in terms of the underlying inter-spacecraft information-exchange network. In particular, we approach the formation observer/estimator design by relaxing the accessibility to the global state information by a centralized observer/estimator- and in turn- providing an analysis and synthesis framework for formation observers/estimators that rely on local measurements. The noveltyof our approach hinges upon the explicit examination of the underlying distributed spacecraft network in the realm of guidance, navigation, and control algorithmic analysis and design. The overarching goal of our general research program, some of whose results are reported in this paper, is the development of distributed spacecraft estimation algorithms that are scalable, modular, and robust to variations inthe topology and link characteristics of the formation information exchange network. In this work, we consider the observability of a spacecraft formation from a single observation node and utilize the agreement protocol as a mechanism for observing formation states from local measurements. Specifically, we show how the symmetry structure of the network, characterized in terms of its automorphism group, directly relates to the observability of the corresponding multi-agent system The ramification of this notion of observability over networks is then explored in the context of distributed formation estimation.

observability↗
DOE OSTI2024

Advanced Sensor Deployment for Distribution System State Estimation and Fault Identification

Distribution systems are currently facing steep operational challenges as a result of the rapidly increasing integration of renewables and other distributed energy resources (DERs) at both the primary and secondary circuit levels. Distribution utilities and system operators have traditionally had some visibility of their primary circuits using low-frequency supervisory control and data acquisition systems, and they have had very poor if not zero visibility of the secondary circuits where the presence of DERs is constantly increasing. Therefore, this paper presents simulation studies to demonstrate the benefits of an advanced, high-fidelity sensor technology, called as the Meta-Alert System (MAS), developed by Electrical Grid Monitoring, Ltd. (EGM), on the distribution grid. First, a reliable model of the EGM sensors is developed, and then two use cases, distribution system state estimation (DSSE) and fault identification are simulated to evaluate the performance of the MAS technology. Simulation results on the Electric Power Research Institute J1 feeder demonstrate that the MAS can effectively participate in system-level DSSE programs and can detect and locate faults faster than traditional distribution protection schemes.

distribution system↗
NASA NTRS1979

State and model error estimation for distributed parameter systems

In-flight estimation of large structure model errors in order to detect inevitable deficiencies in large structure controller/estimator models is discussed. Such an estimation process is particularly applicable in the area of shape control system design required to maintain a prescribed static structural shape and, in addition, suppress dynamic disturbances due to the vehicle vibrational modes. The paper outlines a solution to the problem of static shape estimation where the vehicle shape must be reconstructed from a set of measurements discretely located throughout the structure. The estimation process is based on the principle of least-squares that inherently contains the definition and explicit computation of model error estimates that are optimal in some sense. Consequently, a solution is provided for the problem of estimation of static model errors (e.g., external loads). A generalized formulation applicable to distributed parameters systems is first worked out and then applied to a one-dimensional beam-like structural configuration.

Rodriguez, G.↗
DOE OSTI2022

State Estimation for Distribution Networks with Asynchronous Sensors Using Stochastic Descent: Preprint

This paper investigates the problem of state estimation for distribution networks with asynchronous sensors comprising of a mix of smart meters and phasor measurement units (PMUs) with multiple sampling and reporting rates. We consider two independent scenarios of state estimation and tracking, with either voltages or currents as states. With these two sets, we investigate estimation under (a) full data, assuming all measurements are available and (b) limited data, where an online algorithmic approach is adopted to estimate the possibly time-varying states by processing measurements as and when available. The proposed algorithm, inspired by the classical Stochastic Gradient Descent (SGD) approach updates the states based on the previous estimate and the newly available measurements. Finally, we demonstrate the estimation and tracking efficacy through numerical simulations on the IEEE-37 test network, while also highlighting how estimation with currents as states leads to faster convergence.

asynchronous sensors↗