Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defects and clusters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Investigation of defect clusters in ion-irradiated Ni and NiCo using diffuse X-ray scattering and electron microscopy

The nature of defect clusters in Ni and Ni$_{50}$Co$_{50}$ (NiCo) irradiated at room temperature with 2–16 MeV Ni ions is studied using asymptotic diffuse X-ray scattering and transmission electron microscopy (TEM). Analysis of the scattering data provides separate size distributions for vacancy and interstitial type defect clusters, showing that both types of defect clusters have a smaller size and higher density in NiCo than in Ni. Diffuse scattering results show good quantitative agreement with TEM results for cluster sizes greater than 4 nm diameter, but find that the majority of vacancy clusters are under 2 nm in NiCo, which, if not detected, would lead to the conclusion that defect density was actually lower in the alloy. Interstitial dislocation loops and stacking fault tetrahedra are identified by TEM. Lastly comparison of diffuse scattering lineshapes to those calculated for dislocation loops and SFTs indicates that most of the vacancy clusters are SFTs.

36 MATERIALS SCIENCE↗

Defect Clustering and Nano-phase Structure Characterization of Multicomponent Rare Earth-Oxide-Doped Zirconia-Yttria Thermal Barrier Coatings

Advanced thermal barrier coatings (TBCs) have been developed by incorporating multicomponent rare earth oxide dopants into zirconia-based thermal barrier coatings to promote the creation of the thermodynamically stable, immobile oxide defect clusters and/or nanophases within the coating systems. In this paper, the defect clusters, induced by Nd, Gd, and Yb rare earth dopants in the zirconia-yttria thermal barrier coatings, were characterized by high-resolution transmission electron microscopy (TEM). The TEM lattice imaging, selected area diffraction (SAD), and electron energy-loss spectroscopy (EELS) analyses demonstrated that the extensive nanoscale rare earth dopant segregation exists in the plasma-sprayed and electron-physical-vapor-deposited (EB PVD) thermal barrier coatings. The nanoscale concentration heterogeneity and the resulting large lattice distortion promoted the formation of parallel and rotational defective lattice clusters in the coating systems. The presence of the 5-to 100-nm-sized defect clusters and nanophases is believed to be responsible for the significant reduction of thermal conductivity, improved sintering resistance, and long-term high temperature stability of the advanced thermal barrier coating systems.

Zhu, Dongming↗

Evolution of small defect clusters in ion-irradiated 3C-SiC: Combined cluster dynamics modeling and experimental study

Distribution of black spot defects and small clusters in 1 MeV krypton irradiated 3C-SiC has been investigated using advanced scanning transmission electron microscopy (STEM) and TEM. We find that two thirds of clusters smaller than 1 nm identified in STEM are invisible in TEM images. For clusters that are larger than 1 nm, STEM and TEM results match very well. A cluster dynamics model has been developed for SiC to reveal processes that contribute to evolution of defect clusters and validated against the (S)TEM results. Simulations showed that a model based on established properties of point defects (PDs) generation, reaction, clustering, and cluster dissociation, is unable to predict black spot defects distribution consistent with STEM observations. This failure suggests that additional phenomena not included in a simple point-defect picture may contribute to radiation-induced evolution of defect clusters in SiC and using our model we have determined the effects of a number of these additional phenomena on cluster evolution. Using these additional phenomena it is possible to fit parameters within physically justifiable ranges that yield agreement between cluster distributions predicted by simulations and those measured experimentally.

36 MATERIALS SCIENCE↗

Characterization of defect clusters in ion-irradiated tungsten by X-Ray diffuse scattering

Defect clusters in ion-irradiated tungsten are characterized by X-ray diffuse scattering. Single crystal tungsten samples are irradiated here at 300 K by 0.5–5 MeV copper ions with total doses of 0.2, 0.6, 2, and 5 displacements per atom (DPA). Analysis of the diffuse scattering intensities allows the determination of the concentration of vacancy- and interstitial-type dislocation loops as a function of loop radius for each sample. More vacancies than interstitials are observed in each sample, and the radius of the vacancy loops increases with irradiation dose. For the 0.2DPA sample the average vacancy loop radius is 10.1 ± 3.0 Å with a defect density (counting all atoms in the loops) of ( 10.2 ± 1.5 ) × 10 - 4 per tungsten atom, increasing to an average loop radius of 16.1 ± 3.1 Å at a density of ( 8.5 ± 1.0 ) × 10 - 4 per tungsten atom for the 5DPA sample.

36 MATERIALS SCIENCE↗

Effect of random inhomogeneities in the spatial distribution of radiation-induced defect clusters on carrier transport through the thin base of a heterojunction bipolar transistor upon neutron irradiation

We analyze the electron transport through the thin base of a GaAs heterojunction bipolar transistor with regard to fluctuations in the spatial distribution of defect clusters induced by irradiation with a fissionspectrum fast neutron flux. We theoretically demonstrate that the homogeneous filling of the working region with radiation-induced defect clusters causes minimum degradation of the dc gain of the heterojunction bipolar transistor.

36 MATERIALS SCIENCE↗

Advanced Multi-Component Defect Cluster Oxide Doped Zirconia-Yttria Thermal Barrier Coatings

The advantages of using ceramic thermal barrier coatings in gas turbine engine hot sections include increased fuel efficiency and improved engine reliability. However, current thermal barrier coatings will not have the low thermal conductivity and necessary sintering resistance under higher operating temperatures and thermal gradients required by future advanced ultra efficient and low emission aircraft engines. In this paper, a novel oxide defect cluster design approach is described for achieving low thermal conductivity and excellent thermal stability of the thermal barrier coating systems. This approach utilizes multi-component rare earth and other metal cluster oxide dopants that are incorporated in the zirconia-yttna based systems, thus significantly reducing coating thermal conductivity and sintering resistance by effectively promoting the formation of thermodynamically stable, essentially immobile defect clusters and/or nanoscale phases. The performance of selected plasma-sprayed cluster oxide thermal barrier coating systems has been evaluated. The advanced multi-component thermal barrier coating systems were found to have significantly lower initial and long-term thermal conductivities, and better high temperature stability. The effect of oxide cluster dopants on coating thermal conductivity, sintering resistance, oxide grain growth behavior and durability will be discussed.

Zhu, Dongming↗

Advanced Multi-Component Defect Cluster Oxide Doped Zirconia-Yttria Thermal Barrier Coatings

The advantages of using ceramic thermal barrier coatings in gas turbine engine hot sections include increased fuel efficiency and improved engine reliability. However, current thermal barrier coatings will not have the low thermal conductivity and necessary sintering resistance under higher operating temperatures and thermal gradients required by future advanced ultra-efficient and low-emission aircraft engines. In this paper, a novel oxide defect cluster design approach is described for achieving low thermal conductivity and excellent thermal stability of the thermal barrier coating systems. This approach utilizes multi-component rare earth and other metal cluster oxide dopants that are incorporated in the zirconia-yttria based systems, thus significantly reducing coating thermal conductivity and sintering resistance by effectively promoting the formation of thermodynamically stable, essentially immobile defect clusters and/or nanoscale phases. The performance of selected plasma-sprayed cluster oxide thermal barrier coating systems has been evaluated. The advanced multi-component thermal barrier coating systems were found to have significantly lower initial and long-term thermal conductivities, and better high temperature stability. The effect of oxide cluster dopants on coating thermal conductivity, sintering resistance, oxide grain growth behavior and durability will be discussed.

Zhu, Dongming↗

Atomistically-informed modeling of point defect clustering and evolution in irradiated ThO 2

A cluster dynamics (CD) model has been developed to investigate the nucleation and growth of point defect clusters, i.e., interstitial prismatic loops and nanoscale and sub-nanoscale voids, in ThO 2 during irradiation by energetic particles. The model considers cluster off-stoichiometry due to the asymmetry of point defect generation on the O and Th sublattices under irradiation, as well as the point defect diffusivities and the defect binding energies to clusters. The energies were established using detailed molecular dynamics simulations considering the statistical variability of cluster configuration. A high-order adaptive time-integration has been used to solve the model. The predicted loop density and their average size is in good agreement with reported experimental observations for proton irradiated ThO 2 at 600°C. In conclusion, the model did not predict void evolution due to the sluggish kinetics of cation vacancies, explaining the absence of voids in proton irradiated ThO 2 (and other oxides) at relatively low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-frequency detection of the formation and stabilization of a radiation-induced defect cluster in semiconductor structures

The processes of the formation and stabilization of a radiation-induced defect cluster upon the arrival of a fast neutron to the space-charge region of a semiconductor diode are analyzed. The current pulse formed by secondary electrons is calculated and the spectrum of the signal generated by the diode (detector) under the action of an instantaneous neutron flux of the fission spectrum is determined. The possibility of experimental detection of the picosecond radiation-induced transition processes is discussed.

36 MATERIALS SCIENCE↗

Stability of intrinsic defects and defect clusters in LiNbO{sub 3} from density functional theory calculations

A large experimental body of literature on lithium niobate, a technologically important ferroelectric, suggests that nonstoichiometric defects dominate its physical behavior, from macroscale switching to nanoscale wall structure. The exact structure and energetics of such proposed intrinsic defects and defect clusters remains unverified by either first-principles calculations or experiments. Here, density functional theory (DFT) is used to determine the dominant intrinsic defects in LiNbO{sub 3} under various conditions. In particular, in an Nb{sub 2}O{sub 5}-rich environment, a cluster consisting of a niobium antisite compensated by four lithium vacancies is predicted to be the most stable defect structure, thereby verifying what was thus far a conjecture in the literature. Under Li{sub 2}O-rich conditions, the lithium Frenkel defect is predicted to be the most stable, with a positive defect formation energy (DFE). This is proposed as the underlying reason that the vapor-transport equilibration (VTE) method can grow stoichiometric LiNbO{sub 3}. The effects of temperature and oxygen partial pressure are also explored by combining the DFT results with thermodynamic calculations. These predictions provide a picture of a very rich defect structure in lithium niobate, which has important effects on its physical behavior at the macroscale.

36 MATERIALS SCIENCE↗

Amorphous defect clusters of pure Si and type inversion in Si detectors

Si detectors subjected to energetic particle bombardment are known to undergo a deleterious type inversion from n type to p type. The effect is due to defects that trap electrons but the identity of the main responsible traps remains unknown. Using a combination of classical molecular-dynamics simulations and large-scale density-functional theory calculations, we show that amorphous defect clusters formed under particle bombardment are strong acceptors of electrons and may as such well explain the phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlative Characterization of Dislocation Defects and Defect Clusters in GaAs and CdTe Solar Cells by Spatially Resolved Optical Techniques and High-Resolution TEM

An array of correlative and spatially-resolved techniques, including electroluminescence, photoluminescence, Raman, I-V curve, and high-resolution TEM, have been performed on both GaAs and CdTe solar cells, to study the impact of individual dislocation defects and defect clusters on device performance, the dependence of the impact on the device operation conditions, and the microscopic structures of the defects. This approach offers quantitative and definitive correlation between the atomistic structure of a defect and its effects in a real device.

14 SOLAR ENERGY↗

X-ray Diffuse Scattering near Bragg Relections for the Study of Clustered Defects in Crystalline Materials

The fundamental aspects of diffuse scattering from lattice defects within the coherent wave theory are reviewed, and the use of Huang and asymptotic diffuse scattering for the determination of the size, type, and internal structure of clustered defects is discussed. The scattering amplitude for diffuse scattering from lattice defects is presented within the single defect approximation, and the physical interpretation of the asymptotic diffuse scattering from dislocation loops and precipitates is discussed in terms of local Bragg scattering. The importance of using detailed and accurate displacement fields for calculating diffuse scattering cross sections for dislocation loops and coherent precipitates is emphasized, and examples of the measurement of size distributions for vacancy and interstitial loops and for coherent precipitates in Cu are revisited. In addition, the use of submicrometer-diameter X-ray microbeams to perform depth-resolved diffuse scattering measurements of vacancy and interstitial loop distributions in 10 MeV self-ion-implanted silicon single crystals is discussed.

36 MATERIALS SCIENCE↗

Effects of defect clustering on optical properties of GaN by single and molecular ion irradiation

The effects of irradiation by F, P, and PF{sub 4} on optical properties of GaN were studied experimentally and by atomistic simulations. Additionally, the effect of Ag was studied by simulation. The irradiation energy was 0.6 keV/amu for all projectiles. The measured photoluminescence (PL) decay time was found to be decreasing faster when irradiation was done by molecular ion compared to light ion irradiation. The PL decay time change is connected with the types of defect produced by different projectiles. Simulation results show that the light ions mainly produce isolated point defects while molecular and heavy ions produce clusters of point defects. The total amount of defects produced by the PF{sub 4} projectile was found to be very close to the sum of all defects produced in five individual cascades started by one P and four F single ions. This and the similar depth profiles of damage produced by molecular and light ion irradiations suggest that the defect clusters are one of the important reasons for fast PL decay. Moreover, the simulations of irradiation by Ag ions, whose mass is close to the mass of the PF{sub 4} molecule, showed that the produced defects are clustering in even bigger conglomerates compared to PF{sub 4} case. The latter has a tendency to split in the pre-surface region, reducing on average the density of the collision cascade.

36 MATERIALS SCIENCE↗

Distribution of defect clusters in the primary damage of ion irradiated 3C-SiC

We report a statistical analysis of sizes and compositions of clusters produced in cascades during irradiation of SiC. The results are obtained using molecular dynamics (MD) simulations of cascades caused by primary knock-on atoms (PKAs) with energies between 10 eV and 50 keV. The results are averaged over six crystallographic directions of the PKA and integrated over PKA energy spectrum derived from the Stopping and Range of Ions in Matter (SRIM) code. Specific results are presented for 1 MeV Kr ion as an example of an impinging particle. We find that distributions of cluster size n for both vacancies and interstitials obey a power law f = A/n S and these clusters are dominated by carbons defects. The fitted values of A and S are different than values reported for metals, which can be explained through different defect energetics and cascade morphology between the two classes of materials. In SiC, the average carbon ratio for interstitial clusters is 91.5%, which is higher than the ratio of C in vacancy clusters, which is 85.3%. Size and composition distribution of in-cascade clusters provide a critical input for long-term defect evolution models.

36 MATERIALS SCIENCE↗