Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defect size distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Microstructural dependence of defect formation in iron-oxide thin films

In this report passivating iron-oxide films are grown atop iron films simulating the corrosion process in a nuclear reactor environment. Two oxide films grown via physical vapor deposition at 600 °C and room temperature exhibited dense-epitactic and columnar-polycrystalline, microstructures respectively. A third oxide film grown in open air at 600 °C exhibited an eqiuaxed, porous morphology. Cubic maghemite and magnetite phases in each oxide film were identified via grazing incidence X-ray diffraction. Positron annihilation spectroscopy was used to characterize point defects and measure their depth and size distributions in each oxide layer and showed a range of average positron lifetimes from 0.23 ns in the high temperature, vapor deposited film, 0.35 ns in the room temperature-grown film, and 0.31 ns in the thermally grown oxide. These data indicate that the film morphology, which varies greatly in these films, leads to very different defect content. Finally, four-dimensional scanning transmission electron microscopy was used to measure the internal stress of each film and was correlated to the strain state presented in the X-ray diffraction spectra. The defect formation in each film is reasoned through using a thin film growth model.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The mechanism behind the high radiation tolerance of Fe-Cr alloys

With the great demand for high radiation tolerant materials for advanced nuclear energy technologies, Fe-Cr alloys are at the forefront with long standing validated performance. Yet, the real mechanism behind their high radiation resistance is in question and understanding the effect of varying Cr percentage is a grand challenge limiting further improvements. Here we applied depth resolved atomic scale probe of defects to uncover the real mechanism on how Cr improves radiation resistance and explain the controversial impact of increasing Cr percentage. By combining depth-resolved positron annihilation lifetime spectroscopy and Doppler broadening spectroscopy we investigated the effect of Cr alloying on the formation and evolution of atomic size clusters induced by ion irradiation in Fe. We also used atom probe tomography to investigate the possible presence of Cr clusters or a’ phase with high Cr composition. The study reveals that the well-known resistance to radiation in Fe-Cr alloys arises from the stabilization of vacancy clusters around Cr atoms which act as sinks for radiation-induced defects. Thus, Cr atoms do not provide a direct sink for interstitials; rather defect complexes for that consist of Cr atoms and vacancies in turn act as sinks for irradiation-induced vacancies and interstitials. Most importantly, we find that lower amounts of Cr create smaller, uniformly distributed defect clusters that act as efficient sinks for radiation damage, but larger quantities of Cr form a defect structure that is less homogenous in size and spatial distribution, resulting in less efficient damage recombination. No evidence of phase a’ was found before or after irradiation, which indicates that it does not contribute to the observed radiation tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermodynamic and Kinetic Modulation of Methylammonium Lead Bromide Crystallization Revealed by In Situ Monitoring

Hybrid organic–inorganic perovskite (HOIP) crystals are promising optoelectronic materials, but little is known about either the thermodynamic and kinetic controls on crystal growth or the underlying growth mechanism(s). Herein, we use fluid cell atomic force microscopy (AFM) and solution nuclear magnetic resonance (NMR) spectroscopy to investigate growth of the model HOIP crystal CH 3 NH 3 PbBr 3 (MAPbBr 3 ) and to determine how formic acid (HCOOH) modulates the thermodynamics and kinetics of growth. The results show that growth of MAPbBr 3 in dimethylformamide (DMF) proceeds through the classical pathway by the spreading of atomic crystal steps generated at screw dislocations on the {100} surface. Temperature dependent step velocity measurements demonstrate that with increasing concentration, HCOOH decreases both the solubility of MAPbBr 3 and the kinetic coefficient (b) of step movement. 1 H-NMR measurements indicate that HCOOH increases the lifetime of the methylammonium (MA + ) ions and promotes the association of MAPbBr 3 , thus tuning the solubility of the perovskite. HCOOH also alters the molecular tumbling motion and bulk diffusion of the MA + ions, possibly via H-bonding. Further, our findings establish a direct correlation between the mesoscale crystal growth kinetics and the molecular-scale interactions between organic additives and constituent ions, providing unprecedented insights for developing predictive syntheses of HOIP crystals with defined size, crystal habit and shape, and defect distribution.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Grain engineering for efficient near-infrared perovskite light-emitting diodes

Metal halide perovskites show promise for next-generation light-emitting diodes, particularly in the near-infrared range, where they outperform organic and quantum-dot counterparts. However, they still fall short of costly III-V semiconductor devices, which achieve external quantum efficiencies above 30% with high brightness. Among several factors, controlling grain growth and nanoscale morphology is crucial for further enhancing device performance. This study presents a grain engineering methodology that combines solvent engineering and heterostructure construction to improve light outcoupling efficiency and defect passivation. Solvent engineering enables precise control over grain size and distribution, increasing light outcoupling to ~40%. Constructing 2D/3D heterostructures with a conjugated cation reduces defect densities and accelerates radiative recombination. The resulting near-infrared perovskite light-emitting diodes achieve a peak external quantum efficiency of 31.4% and demonstrate a maximum brightness of 929 W sr -1 m -2 . These findings indicate that perovskite light-emitting diodes have potential as cost-effective, high-performance near-infrared light sources for practical applications.

42 ENGINEERING↗
DOE OSTI2023

Defect engineering of porous aromatic frameworks via end capping improves dioxane removal from water

Amorphous porous organic polymers show promise for energy-efficient adsorptive separations, but it is difficult to understand or improve their performance through intentional structural modification. Herein, we report the synthesis of porous aromatic frameworks (PAFs) with pore structures tailored by the incorporation of a monofunctionalized end-capping monomer that disrupts framework topology. Combining experimental characterization with molecular simulations, we show that this defect engineering strategy yields less densely crosslinked networks, which leads to pore collapse and the presence of unique adsorption sites. These defect-engineered PAFs exhibit enhanced removal of 1,4-dioxane, an important environmental pollutant, from water. Increasing the concentration of end-capping monomers produces PAFs with narrower pore size distributions and improved 1,4-dioxane uptake. These results illustrate that defect engineering can effectively modulate polymer connectivity and porosity for applications in selective adsorptive separations. In conclusion, this technique avoids post-synthetic treatments and presents another approach to tailor amorphous polymeric adsorbents.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrochemical Imaging of Precisely‐Defined Redox and Reactive Interfaces

Abstract Understanding the diverse electrochemical reactions occurring at electrode‐electrolyte interfaces (EEIs) is a critical challenge to developing more efficient energy conversion and storage technologies. Establishing a predictive molecular‐level understanding of solid electrolyte interphases (SEIs) is challenging due to the presence of multiple intertwined chemical and electrochemical processes occurring at battery electrodes. Similarly, chemical conversions in reactive electrochemical systems are often influenced by the heterogeneous distribution of active sites, surface defects, and catalyst particle sizes. In this mini review, we highlight an emerging field of interfacial science that isolates the impact of specific chemical species by preparing precisely‐defined EEIs and visualizing the reactivity of their individual components using single‐entity characterization techniques. We highlight the broad applicability and versatility of these methods, along with current state‐of‐the‐art instrumentation and future opportunities for these approaches to address key scientific challenges related to batteries, chemical separations, and fuel cells. We establish that controlled preparation of well‐defined electrodes combined with single entity characterization will be crucial to filling key knowledge gaps and advancing the theories used to describe and predict chemical and physical processes occurring at EEIs and accelerating new materials discovery for energy applications.

Edgecomb, Joseph↗
DOE OSTI2024

Electrochemical Imaging of Precisely‐Defined Redox and Reactive Interfaces

Abstract Understanding the diverse electrochemical reactions occurring at electrode‐electrolyte interfaces (EEIs) is a critical challenge to developing more efficient energy conversion and storage technologies. Establishing a predictive molecular‐level understanding of solid electrolyte interphases (SEIs) is challenging due to the presence of multiple intertwined chemical and electrochemical processes occurring at battery electrodes. Similarly, chemical conversions in reactive electrochemical systems are often influenced by the heterogeneous distribution of active sites, surface defects, and catalyst particle sizes. In this mini review, we highlight an emerging field of interfacial science that isolates the impact of specific chemical species by preparing precisely‐defined EEIs and visualizing the reactivity of their individual components using single‐entity characterization techniques. We highlight the broad applicability and versatility of these methods, along with current state‐of‐the‐art instrumentation and future opportunities for these approaches to address key scientific challenges related to batteries, chemical separations, and fuel cells. We establish that controlled preparation of well‐defined electrodes combined with single entity characterization will be crucial to filling key knowledge gaps and advancing the theories used to describe and predict chemical and physical processes occurring at EEIs and accelerating new materials discovery for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Phase-field modeling for restructuring in the dark zone of high burnup UO 2

This report summarizes the mesoscale modeling work performed in fiscal year 2024 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to capture the microstructural evolution and restructuring observed in the dark regions of high burnup UO 2 nuclear fuel. This is the first attempt to realistically simulate the restructuring behavior observed in different region of a high burnup fuel. We employ a grand-potential based phase-field model to concurrently evaluate the formation of subgrains and growth of fission bubbles within the fuel. A energy-based subgrain formation criteria is introduced to simulate the restructuring process. Effect of different initial conditions and different modeling parameters are studies systematically to capture how each of these parameters influence the characteristics of the restructured fuel. It is observed that the subgrain formation begins around existing fission gas bubbles and then proceeds towards triple junctions, grain boundaries and grain interiors. It is demonstrated that restructuring is influenced by a combination of initial dislocation densities, subgrain formation rate, and temperature. Rate of restructuring increases with increase in fuel temperature. A restructuring bias is observed within the microstructure due to variation in defect accumulation among different grains. Furthermore, bubble sizes and distribution does not have a significant effect on rate of restructuring. The predicted microstructures resembles the characteristics of the restructured regions as observed in experiments. Finally, a correlation is presented that demonstrates the evolution of the restructuring volume fraction as a function of local effective burnup. This work provides a first of its kind restructuring model for darkzone that can be used by BISON for performance prediction of high burnup UO 2 fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Surprisingly high irradiation-induced defect mobility in Fe 3 O 4 as revealed through in situ transmission electron microscopy

Radiation-induced defects are expected to change the corrosion kinetics when a material is exposed to a corrosive environment. Characterization of the defects forming under irradiation and their ability to move/diffuse is therefore key to understanding how they impact the corrosion kinetics and possibly mechanisms. For that matter, Fe/Fe 3 O 4 interfaces were irradiated using 1 MeV Kr 2+ at temperatures of 273 K (25 °C), 573 K (300 °C) and 773 K (500 °C) to a maximum dose of 10 dpa (as measured in the Fe matrix) in situ in a transmission electron microscope. The evolution of the microstructure was followed as a function of the dose and temperature. The formation of defects was followed in the metal and the oxide as well as at the metal/oxide interface and characterized in terms of size and density. Additionally, the dynamic observation of the spatial distribution of the defects allowed for a qualitative assessment of the mobility of defects in the oxide as a function of temperature, revealing evidence for enhanced mobility even more so than in the Fe matrix. Mechanisms of induced defect mobility in the spinel are discussed to account for the observations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructurally informed synchrotron x-ray analysis revealing helium defect transitions in ultrafine grained tungsten

The formation of insoluble gaseous defects in materials due to nuclear transmutation or ion implantation involves the diffusion of impurity atoms to form atomic defect clusters that coalesce into bubbles or cavities and ultimately degrade the material properties. Transmission electron microscopy (TEM) is limited in its ability to resolve sub-nanometer gas clusters whereas X-ray diffraction (XRD) provides information pertaining to local atomic changes. Here, in this study, helium (He) implanted ultrafine grained tungsten is explored through a multimodal defect characterization campaign combining TEM-informed Small Angle X-ray Scattering (SAXS) analysis, XRD lattice parameter measurements, and nanoscale He cluster quantification from a region of reciprocal space accessible via Wide Angle X-ray Scattering (WAXS). Moderate elevated temperature implantations are shown to produce high concentrations of sub-nanoscale He clusters and small, homogeneously distributed cavities, which collectively are linked to lattice expansion and further substantiated through complementary atomistic simulations. Increased implantation temperatures encourage the diffusion of these defects to the grain boundaries (GBs), leading to lattice relaxation and the growth of large GB cavities manifesting as bimodal size distributions in the SAXS analysis. Overall, our results demonstrate the utility of multimodal synchrotron X-ray analysis in bridging the gap between microscale He cavity quantification and atomic-scale defect analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding kinetics of defect annihilation in chemoepitaxy-directed self-assembly.

Directed self-assembly (DSA) of block copolymers (BCP) has attracted considerable interest from the semiconductor industry because it can achieve semiconductor-relevant structures with a relatively simple process and low cost. However, the self-assembling structures can become kinetically trapped into defective states, which greatly impedes the implementation of DSA in high-volume manufacturing. Understanding the kinetics of defect annihilation is crucial to optimizing the process and eventually eliminating defects in DSA. Such kinetic experiments, however, are not commonly available in academic laboratories. To address this challenge, we perform a kinetic study of chemoepitaxy DSA in a 300 mm wafer fab, where the complete defectivity information at various annealing conditions can be readily captured. Through extensive statistical analysis, we reveal the statistical model of defect annihilation in DSA for the first time. The annihilation kinetics can be well described by a power law model, indicating that all dislocations can be removed by sufficiently long annealing time. We further develop image analysis algorithms to analyze the distribution of dislocation size and configurations and discover that the distribution stays relatively constant over time. The defect distribution is determined by the role of the guiding stripe, which is found to stabilize the defects. Although this study is based on polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA), we anticipate that these findings can be readily applied to other BCP platforms as well.

block copolymer↗
DOE OSTI2022

Additive Manufacturing Flaw Assessment Methodology

An evolution fatigue data and flaw tolerance of components produced using the Powder Bed Fusion (PBF) Additive Manufacturing (AM) process is documented in this report. Initial differences in fatigue data for AM components compared to smooth bar fatigue data indicated a need for a more detailed analysis of AM data available in technical literature. The investigation was initiated to support the development of a fatigue analysis methodology for AM components to support the of codification of AM technology for pressure equipment. The project was initiated to collect and analyze stainless steel 304L and 316L AM fatigue test data and corresponding process and quality information to develop S-N and E-N based fatigue data representation. Additional AM fatigue test data including Inconel Ti-6-4 and aluminum alloys were also considered for comparison purposes Metallic AM parts tend to contain various forms of defects distributed throughout the part. If an AM part is subjected to fatigue loading in service, a fatigue analysis needs to be performed during the design process to ensure an acceptable service life for the part. Post-process machining and polishing do not to improve fatigue resistance in any significant degree. The low cycle fatigue regime is of particular interest to this project in support of flaw acceptance criteria currently under development by ASME’s BPTCS/BNCS. Internal defects become exposed as external surface defects during machining for the machining of the AM part to final dimensions. This implies that as long as inherent AM defects are within a controlled limit in terms of both size and distribution characteristics, the corresponding fatigue test data in terms of either S-N (stress life) or E-N (strain life) can be investigated and characterized to establish fatigue properties of AM parts for design and fatigue evaluation purposes. The resulting S-N or E-N curves and their scatter bands can be used to derive fatigue design allowable stress values by capturing the effects of distributed discontinuities within an acceptable limit.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Cluster Dynamics Simulations of Intra-Granular Fission Gas Bubble Size and Pressure Evolution in UO 2

Fission gases such as xenon (Xe) play a critical role in determining the behavior and response of nuclear fuel. Given that Xe has little solubility in UO 2 , it accumulates and forms bubbles, which significantly impact fuel performance. Intra- and inter-granular bubble nucleation and growth can lead to fuel swelling, and once bubbles interconnect at grain boundaries, fission gas can be released into the plenum. At low temperatures, limited uranium vacancy mobility can restrict swelling, therefore causing the bubbles to become highly pressurized. Consequently, this can induce micro-cracking, promote fission gas release (increasing the likelihood of cladding failure), and even lead to fuel pulverization under accident conditions such as a loss of coolant accident. As bubble evolution is strongly influenced by local temperature and fission rate, markedly different behavior occurs across the radial profile of the fuel pellet. Capturing the mechanisms that underpin bubble evolution is therefore important to predict these behaviors in the fuel. Previous models describing important mechanisms informed by lower length scale simulations have been developed under the NEAMS program. These can describe the evolution of a single bubble type (i.e., single value for radius and pressure) at each position in the pellet, for instance using the Centipede cluster dynamic code. However, in reality, a full distribution in bubble sizes and pressures exists within the microstructure at a given position in the pellet. To address this the cluster dynamics code Xolotl, which can predict Xe and vacancy phase space (i.e., bubble distributions) for intra-granular bubbles, has been used before. Prior work benchmarked the Xolotl code against the Centipede cluster dynamics code to ensure compatibility and to verify that mobile defect properties are adequately transferred between the two codes, along with some physics improvements. In this work, we go further by introducing a physics-based set of improvements that will allow us to accurately predict bubble size distributions and internal bubble pressures under representative UO 2 irradiation conditions. The improvements include (i) coupling bubble-defect reaction energies to a virial equation of state (EOS), (ii) including a bubble surface tension contribution, (iii) incorporating radiation-induced re-solution of Xe and vacancies, (iv) enabling pressure-driven dislocation loop punching through an effective emission of interstitial clusters informed by interstitial loop energetics, (v) accounting for radiation induced athermal diffusion of Xe, and (vi) implementing a Booth-type grain boundary sink representation for all mobile defects and defect clusters. After these modifications, we observe good agreement of Xolotl fission gas bubble size and concentration predictions with legacy experimental measurements. Additionally, it allows the distribution of Xe bubble pressures and radius to also be predicted and compared to data produced through the Advanced Fuels Campaign (AFC) program. Here, we have done this by running simulations under conditions similar to the AFC post-irradiation examination (PIE) samples irradiated at North Anna 2 light water reactor (LWR). Our results shows excellent agreement with these experimental measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

High-Energy X-ray Tomographic Analysis of Precursor Metal Powders (Ti-6Al-4V) Used for Additive Manufacturing

We utilized high-energy x-ray tomography to characterize Ti-6Al-4V metal powders (both as-received and recycled) used in powder-bed additive manufacturing process. The image processing workflow was developed to process and analyze large amount of data objectively by computer program. The distribution of size and shape of the metal particles as well as defect (mainly porosity) inside the particles was analyzed with the statistical representation and resolution in micrometer. The result revealed that circular-shaped porosity with various sizes could be embedded in the powder particles. These porosities could potentially be transferred to the 3D printed part and critically affect the mechanical performance of the component. The present study shows the effectiveness of characterizing metal powders using x-ray imaging techniques where sufficient number of particles can be sampled within tens of minutes with a minimum sample preparation and high accuracy. Clear structural differences in the as-received and recycled powders were delineated that helps in determining the feasibility of using the recycled powders.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Kinetic Monte Carlo simulations of aging in δ -Pu

We have developed a first-passage kinetic Monte Carlo approach for materials aging to investigate the sensitivity of void swelling to model parameters, including helium bubble density and size distribution. In addition to explicitly accounting for the spatial distribution of individual point defects, bubbles, and voids, our approach can simulate total doses equivalent to 100 years of natural aging on statistically representative volumes of materials. This technique enables us to study the effects on swelling and radiation damage evolution due to temperature and dose rate (as altered in artificially aged experiments), differences in effective interaction radii between vacancies and interstitials, and varying defect diffusion activation energies, while providing more detailed information than previous rate-equation based approaches. In conclusion, our results indicate that spatial effects that are not modeled in mean-field rate theories could play a significant role in void swelling initiation and growth for certain regimes of model parameters.

Actinides↗
DOE OSTI2021

Persistent Structure and Frustrated Magnetism in High Entropy Rare-Earth Zirconates

The configurational complexity and distinct local atomic environments of high entropy oxides remain largely unexplored, leaving structure-property relationships and the hypothesis that the family offers rich tunability for applications ambiguous. This work investigates the influence of cation size and materials synthesis in determining the resulting structure and magnetic properties of a family of high entropy rare-earth zirconates (HEREZs, nominal composition RE 2 Zr 2 O 7 with RE = rare-earth element combinations including Eu, Gd, Tb, Dy, Ho, La, or Sc). Here, the structural characterization of the series is examined through synchrotron X-ray diffraction and pair distribution function analysis, and electron microscopy, demonstrating average defect-fluorite structures with considerable local disorder, in all samples. The surface morphology and particle sizes are found to vary significantly with preparation method, with irregular micron-sized particles formed by high temperature sintering routes, spherical nanoparticles resulting from chemical co-precipitation methods, and porous nanoparticle agglomerates resulting from polymer steric entrapment synthesis. In agreement with the disordered cation distribution found across all samples, magnetic measurements indicate that all synthesized HEREZs show frustrated magnetic behavior, as seen in a number of single-component RE 2 Zr 2 O 7 pyrochlore oxides. These findings advance the understanding of the local structure of high entropy oxides and demonstrate strategies for designing nanostructured morphologies in the class.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mesoscale modeling of restructuring in high burnup UO 2 fuel

Here, this work aims to simulate the restructuring behavior observed in different regions of high burnup fuel, providing a first-of-its-kind restructuring model for the dark zone and rim region of high-burnup UO 2 fuel. We employed a grand-potential-based phase-field model to concurrently evaluate subgrain formation and the growth of fission gas bubbles within the fuel. An energy-based subgrain formation criterion was introduced to simulate the restructuring process. The effects of different initial conditions and different modeling parameters were systematically studied to capture how each of these parameters influences the characteristics of the restructured fuel. Subgrain formation was observed to begin around existing fission gas bubbles and proceed toward triple junctions, grain boundaries, and grain interiors. Restructuring was demonstrated to be influenced by a combination of initial dislocation densities, burnup rate, subgrain formation rate, and temperature. Under a given subgrain formation rate, the rate of restructuring increases with rising fuel temperature. A restructuring bias was observed within the microstructure, due to the variation in defect accumulation when comparing different grains. Microstructures corresponding to the dark zone and rim region can be obtained by parameterizing the model with the appropriate defect production rate, as determined based on the burnup rate and temperature. Furthermore, bubble size and distribution do not significantly affect the rate of restructuring. The predicted microstructures are consistent with experimental observations of the restructured regions. Finally, we present a correlation demonstrating the evolution of the restructuring volume fraction as a function of local burnup.

UO2↗
DOE OSTI2021

Microstructure-Dependent Rate Theory Model of Radiation-Induced Segregation in Binary Alloys

Conventional rate theory often uses the mean field concept to describe the effect of inhomogeneous microstructures on the evolution of radiation induced defect and solute/fission product segregation. However, the spatial and temporal evolution of defects and solutes determines the formation and spatial distribution of radiation-induced second phase such as precipitates and gas bubbles/voids, especially in materials with complicated microstructures and subject to high dose radiation. In this work, a microstructure-dependent model of radiation-induced segregation (RIS) has been developed to investigate the effect of inhomogeneous thermodynamic and kinetics properties of defects on diffusion and accumulations of solute A in AB binary alloys. Four independent concentrations: atom A, interstitial A, interstitial B, and vacancy on [A, B] sublattice are used as field variables to describe temporal and spatial distribution and evolution of defects and solute A. The independent concentrations of interstitial A and interstitial B allow to describe their different generation rates, thermodynamic and kinetic properties, and release the assumptions of interstitial generation and sink strength used in the conventional rate theory. Microstructure and concentration dependent chemical potentials of defects are used to calculate the driving forces of defect diffusions. With the model, the effects of defect chemical potentials and mobilities on the RIS in polycrystalline AB model alloys have been simulated. The results demonstrated the model capability in predicting defect evolution in materials with inhomogeneous thermodynamic and kinetic properties of defects. The model can be extended to materials with complicated microstructures such as a wide range of grain size distribution, coating structure and multiphases as well as radiation-induced precipitation subject to severe radiation damage.

36 MATERIALS SCIENCE↗