Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data transfers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Data transfers for full core heterogeneous reactor high- fidelity multiphysics studies

Multiphysics simulations for nuclear reactor analysis are usually performed by resorting to operator splitting and fixed point iterations between single-physics solvers. This enables the separate solution of each physics, such as neutronics, fuel performance, and thermal hydraulics, on meshes tailored to the requirements of the respective numerical discretizations of the equations. As the equations are coupled, several fields must be transferred between single-physics solves. Projecting fields between meshes while preserving order of accuracy, conservation properties, and mapping non-overlapping geometries is a complex endeavor. This conference paper will present the transfers as implemented in MOOSE, which can handle arbitrary meshes, arbitrary mappings, conservation of integral quantities, and are made to scale with distributed simulations on both ends of the transfers. Their adequacy for advanced nuclear reactor multiphysics coupling is shown through examples and numerical studies.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

2020 State of the Science Report, Chapter 13: Risk Retirement and Data Transferability for Marine Renewable Energy

Commercial-scale marine renewable energy (MRE) developments continue to progress slowly, in part because of complicated consenting/permitting (hereafter consenting) processes that invoke the precautionary principle within environmental legislative frameworks. This can lead to broad, poorly scoped environmental assessments, lengthy and expensive environmental data collection requirements, and extended consenting timelines. Much of this delay is associated with uncertainty about the potential effects of MRE on marine animals and habitats. https://tethys.pnnl.gov/publications/state-of-the-science-2020-chapter-13-risk-retirement

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Earthquake Magnitude With DAS: A Transferable Data–Based Scaling Relation

Distributed Acoustic Sensing (DAS) is a promising technique to improve the rapid detection and characterization of earthquakes. Previous DAS studies mainly focus on the phase information but less on the amplitude information. In this study, we compile earthquake data from two DAS arrays in California, USA, and one submarine array in Sanriku, Japan. We develop a data-driven method to obtain the first scaling relation between DAS amplitude and earthquake magnitude. Our results reveal that the earthquake amplitudes recorded by DAS in different regions follow a similar scaling relation. The scaling relation can provide a rapid earthquake magnitude estimation and effectively avoid uncertainties caused by the conversion to ground motions. Our results show that the scaling relation appears transferable to new regions with calibrations. The scaling relation highlights the great potential of DAS in earthquake source characterization and early warning.

58 GEOSCIENCES↗
DOE OSTI2021

Interpolation data transfer between the models before and after a partial drawdown leach in BH

It has been recognized that as cavern operations become more frequent due to oil sales, field conditions may arise which require a faster turnaround time of analysis to address potential cavern impacts. This letter describes attempts to implement a strategy of transferring an intermediate solution of a Big Hill (BH) geomechanical model from a previous finite element mesh with a specified cavern geometry, to a new mesh with a new cavern geometry created by leaching from an oil sale operation.

02 PETROLEUM↗
DOE OSTI2024

Field Validation of MVA Technology for Offshore CCS: Novel Ultra-High-Resolution 3D Marine Seismic Technology (P-Cable) (Final Report)

The objectives of the proposed study were to deploy and validate a specific monitoring technology, high-resolution 3D marine seismic (HR3D), appropriate for large-demonstration and commercial-scale offshore CCS sites. The project accomplished successful acquisition two HR3D seismic surveys. The first HR3D dataset was over the offshore injection site of the Tomakomai, Japan integrated pilot CCS project, which at the time of survey acquisition was actively injecting CO 2 . The first survey also represented a successful international collaboration between the DOE NETL program and Japan’s national CCS program and was the first successful acquisition and use of HR3D over an active CO 2 injection site (Meckel, Feng et al. 2019). The Tomakomai HR3D survey successfully tested a novel 4-streamer HR3D system array in which, for the first time, no cross-cable (aka “P-Cable”) was utilized and only four GeoEel streamers were used instead of the standard 12-streamer configuration. Consequently, this was not, strictly speaking, a deployment of the “P-Cable” system of (Planke and Berndt 2004) but rather a modified version, thereof, and it is the first known demonstration of the modified system configuration. One very positive outcome from the Japanese collaboration earlier in the project was the ability to learn from the Japanese how they used tail buoys with GPS to determine the position of the seismic source and receivers in time and space. Based on that experience, GCCC designed and built six GPS receivers that could be used to position the streamer receivers and the seismic source via tail buoys. A fundamental advance that was made on the original design, was the ability to directly power the tail buoy GPS units and transfer data through the streamers (i.e., vs. the batteries used at Tomakomai). The bulkiness of the GPS batteries caused drag and episodic surging of the buoys, which affected data quality by lifting up the tail end of the streamers so the receivers were not at the same depth. The units were tested onshore for accuracy and functionality, and the design was subsequently and successfully tested in marine acquisition mode during the SLP survey acquisition. The marine acquisition test and survey satisfied Subtasks 2.2.2, Novel Positioning Technology Selection and Subtask 2.2.3, Novel Positioning Technology Deployment. Results of the novel positioning technology selection (Subtask 2.2.2) were considered successful and will be incorporated in future HR3D seismic acquisition projects to reduce costs, improve deployment safety at sea, and integrate both seismic and data recording via a single data transfer through the streamers to the recording system. The project also established a permitting process through NETL NEPA compliance, which included an Environmental Assessment in a marine setting and is required for conducting these types of surveys using Federal funding. The permitting process charted a “boilerplate,” which can allow future surveys related to other funded projects to move forward more expeditiously. Future improvements that could be considered are more robust seals on the GPS module and stronger materials (especially joints) on tail buoy fabrication. These would increase fixed costs, but would be advisable and probably more economic long-term if multiple HR3D surveys are planned. Project Accomplishments include: • Pre-survey Sensitivity Study • Marine geochemistry methods and data analysis • Successful HR3D seismic dataset acquired @ Tomakomai active CO 2 injection marine site • Developed advanced seismic processing techniques • No NRMS anomalies detected in overburden; Demonstration of containment • Repeatability study • Second survey collected @ San Luis Pass, TX • 4D application using positioning techniques developed in the project for monitoring were successful

3D seismic GPS positioning↗
DOE OSTI2024

An FPGA-based hardware accelerator supporting sensitive sequence homology filtering with profile hidden Markov models

Abstract Background Sequence alignment lies at the heart of genome sequence annotation. While the BLAST suite of alignment tools has long held an important role in alignment-based sequence database search, greater sensitivity is achieved through the use of profile hidden Markov models (pHMMs). Here, we describe an FPGA hardware accelerator, called HAVAC, that targets a key bottleneck step (SSV) in the analysis pipeline of the popular pHMM alignment tool, HMMER. Results The HAVAC kernel calculates the SSV matrix at 1739 GCUPS on a $$\sim$$ ∼ $3000 Xilinx Alveo U50 FPGA accelerator card, $$\sim$$ ∼ 227× faster than the optimized SSV implementation in nhmmer . Accounting for PCI-e data transfer data processing, HAVAC is 65× faster than nhmmer’s SSV with one thread and 35× faster than nhmmer with four threads, and uses $$\sim$$ ∼ 31% the energy of a traditional high end Intel CPU. Conclusions HAVAC demonstrates the potential offered by FPGA hardware accelerators to produce dramatic speed gains in sequence annotation and related bioinformatics applications. Because these computations are performed on a co-processor, the host CPU remains free to simultaneously compute other aspects of the analysis pipeline.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Contrastive Machine Learning with Gamma Spectroscopy Data Augmentations for Detecting Shielded Radiological Material Transfers

Data analysis techniques can be powerful tools for rapidly analyzing data and extracting information that can be used in a latent space for categorizing observations between classes of data. Machine learning models that exploit learned data relationships can address a variety of nuclear nonproliferation challenges like the detection and tracking of shielded radiological material transfers. The high resource cost of manually labeling radiation spectra is a hindrance to the rapid analysis of data collected from persistent monitoring and to the adoption of supervised machine learning methods that require large volumes of curated training data. Instead, contrastive self-supervised learning on unlabeled spectra can enhance models that are built on limited labeled radiation datasets. This work demonstrates that contrastive machine learning is an effective technique for leveraging unlabeled data in detecting and characterizing nuclear material transfers demonstrated on radiation measurements collected at an Oak Ridge National Laboratory testbed, where sodium iodide detectors measure gamma radiation emitted by material transfers between the High Flux Isotope Reactor and the Radiochemical Engineering Development Center. Label-invariant data augmentations tailored for gamma radiation detection physics are used on unlabeled spectra to contrastively train an encoder, learning a complex, embedded state space with self-supervision. A linear classifier is then trained on a limited set of labeled data to distinguish transfer spectra between byproducts and tracked nuclear material using representations from the contrastively trained encoder. The optimized hyperparameter model achieves a balanced accuracy score of 80.30%. Any given model—that is, a trained encoder and classifier—shows preferential treatment for specific subclasses of transfer types. Regardless of the classifier complexity, a supervised classifier using contrastively trained representations achieves higher accuracy than using spectra when trained and tested on limited labeled data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗