Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Evaluating software development by analysis of changes: The data from the software engineering laboratory

An effective data collection methodology for evaluating software development methodologies was applied to four different software development projects. Goals of the data collection included characterizing changes and errors, characterizing projects and programmers, identifying effective error detection and correction techniques, and investigating ripple effects. The data collected consisted of changes (including error corrections) made to the software after code was written and baselined, but before testing began. Data collection and validation were concurrent with software development. Changes reported were verified by interviews with programmers.

Source record↗
NASA NTRS1995

Seamless Data-Rate Change Using Punctured Convolutional Codes for Time-Varying Signal-to-Noise Ratio

In a time-varying signal-to-noise (SNR) environment, symbol rate is often changed to maximize ata return. However, the symbol-rate change has some undesirable effects such as changing the ransmission bandwidth and perhaps causing the receiver symbol loop to lose lock temporarily, thus osing some data. In this article, we are proposing an alternate way of varying the data rate without hanging the symbol rate and therefore the transmission bandwidth. The data rate change is achieved n a seamless fashion by puncturing the convolutionally encoded symbol stream to adapt to the hanging SNR environment. We have also derived an exact expression to enumerate the number of nique puncturing patterns. To demonstrate this seamless rate-change capability, we searched for good uncturing patterns for the Galileo (14, 1/4) convolutional code and changed the data rates by using the unctured codes to match the Galileo SNR profile of November 9, 1997.

Seamless Data-Rate↗
NASA NTRS1977

Evaluation of change detection techniques for monitoring coastal zone environments

The author has identified the following significant results. Four change detection techniques were designed and implemented for evaluation: (1) post classification comparison change detection, (2) delta data change detection, (3) spectral/temporal change classification, and (4) layered spectral/temporal change classification. The post classification comparison technique reliably identified areas of change and was used as the standard for qualitatively evaluating the other three techniques. The layered spectral/temporal change classification and the delta data change detection results generally agreed with the post classification comparison technique results; however, many small areas of change were not identified. Major discrepancies existed between the post classification comparison and spectral/temporal change detection results.

Weismiller, R. A.↗
NASA NTRS2011

Distributed Monitoring of the R(sup 2) Statistic for Linear Regression

The problem of monitoring a multivariate linear regression model is relevant in studying the evolving relationship between a set of input variables (features) and one or more dependent target variables. This problem becomes challenging for large scale data in a distributed computing environment when only a subset of instances is available at individual nodes and the local data changes frequently. Data centralization and periodic model recomputation can add high overhead to tasks like anomaly detection in such dynamic settings. Therefore, the goal is to develop techniques for monitoring and updating the model over the union of all nodes data in a communication-efficient fashion. Correctness guarantees on such techniques are also often highly desirable, especially in safety-critical application scenarios. In this paper we develop DReMo a distributed algorithm with very low resource overhead, for monitoring the quality of a regression model in terms of its coefficient of determination (R2 statistic). When the nodes collectively determine that R2 has dropped below a fixed threshold, the linear regression model is recomputed via a network-wide convergecast and the updated model is broadcast back to all nodes. We show empirically, using both synthetic and real data, that our proposed method is highly communication-efficient and scalable, and also provide theoretical guarantees on correctness.

Bhaduri, Kanishka↗
NASA NTRS1995

Measurement characteristics and Kinematics of Sea Ice Using Microwave Satellite Data

Changes in sea ice conditions have major effects on the ocean and on weather, but visual observations miss periods of cloudiness and darkness. Microwave radar satellites are the only uninterrupted source of high resolution (30 m) data. Recent developments will allow high-resolution global sea-ice tracking at intervals of a few days.

remote sensing sea ice synthetic aperture radar SA↗
NASA NTRS1977

Changing NRZ data to biphase logic

Simple arrangement of four integrated circuits changes stream of binary data from non-return-to-zero (NRZ) coding to biphase logic coding. Selection of wiring and integrated circuits enables control and balancing of propagation delay without requiring excessive and expensive hardware.

Baker, E. B.↗
NASA NTRS1980

Addition to the Lewis Chemical Equilibrium Program to allow computation from coal composition data

Changes made to the Coal Gasification Project are reported. The program was developed by equilibrium combustion in rocket engines. It can be applied directly to the entrained flow coal gasification process. The particular problem addressed is the reduction of the coal data into a form suitable to the program, since the manual process is involved and error prone. A similar problem in relating the normal output of the program to parameters meaningful to the coal gasification process is also addressed.

Sevigny, R.↗
NASA NTRS1991

The Earth Observing System Data and Information System

The system is described in terms of the broad context of scientific cooperation and research which are facilitated by the architecture designed and the nature of the generated data. The Earth Observing System Data and Information System (EOSDIS) is composed of earth-science and applications data systems which archive global-change data and distribute the information to system users. Several archive centers catalogue selected Pathfinder data sets and generate new data products (such as maps of sea ice, cloud studies, etc.) with consistent calibration of all data. The schedule of three versions of EOSDIS is discussed with reference to the system architecture, programmatic plans, and data policy. The critical issue for EOSDIS is international cooperation to sponsor an infrastructure of global change data of this magnitude for public benefit and scientific research.

Maiden, Martha E.↗
NASA NTRS2004

On-board processor for direct distribution of change detection data products

We are developing an on-board imagin radar data processor for repeat-pass change detection and hazards management. This is the enabling technology for NASA ESE to utilize imaging radars. This processor will enable the observation and use of surface deformation data over rapidly evolving natural hazards, both as an aid to scientific understanding ad to provide timely data to agencies responsible for the management and mitigation of natural disasters.

InSAR↗
NASA NTRS1985

Patterns of reflected radiance associated with geobotanical anomalies

This paper summarizes three remote sensing experiments in which changes in remotely measured reflected radiance patterns of vegetation correlated with changes in geology. In two cases using airborne spectroradiometer data, changes in the physical properties of a uniform species correlated with zones of porphyry copper mineralization. In another case using Landsat digital data, changes were detected in the distribution and density of a number of species and combined with soil brightness data to produce a composite index useful for distinguishing lithologies.

Birnie, R. W.↗
NASA NTRSDate not supplied

SAGE III/ISS v5.3 Level 2 Data Product Changes and Improvements

The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.

Carter Hulsey↗
NASA NTRSDate not supplied

SAGE III/ISS v5.3 Level 2 Data Product Changes and Improvements

The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.

Carter Hulsey↗
NASA NTRS1988

Adapting the NSCAT data system to changing requirements

The data system of the spaceborne eight-beam NASA scatterometer for measuring ocean backscatter is a nonreal-time ground-based science data processing system which inputs backscatter telemetry, processes the data into wind vectors, and archives and distributes the wind vector data and other products. Special attention is given to changes to the baseline design intended to meet new requirements for the data granularity, the data needs of the science team receiving the data, and the telemetry data source.

Benada, J. R.↗
NASA NTRSDate not supplied

Leveraging Human Performance Data to Change the Narrative that People are the Safety Problem

The study of errors and failure has a long and productive history in the behavioral sciences. By studying how systems fail, we rule out various mechanisms for how those systems might work, thereby refining our theories of how they actually work. Human performance, however, includes more than errors; human performance comprises both failures and successes. A systematic bias to collect and analyze data only on error affects the decisions we make as a community by promoting the narrative that “people are the safety problem.” This narrative manifests in both obvious and subtle ways in the design of systems intended for human use. When the only safety data that are available are about human failure, then “data-driven” designs can only consider that humans fail. Changing this narrative will depend on new data and new ways to examine data – specifically, data on the processes by which human create and contribute to safety. An alternate narrative is that people represent a primary source of safety, through their capability to anticipate, monitor for, respond to, and learn from expected and unexpected change. This presentation will describe research efforts to expand the range of safety-relevant events to include not just rare safety failures but frequent safety successes. These efforts include use of data from both operations and simulations to develop methods and metrics for learning from structured observation, self-report, and system data.

Jon Holbrook↗
NASA NTRS2003

Sensitivity of the Assimilated Ozone in the UTLS to Model and Data Selection Changes

This presentation will discuss the sensitivity of assimilated ozone fields in the upper troposphere and lower stratosphere (UTLS) to a number of factors, focusing mainly on aspects of data selection and the prediction model. This is important, because assimilation represents an attempt to construct our best estimates of the true ozone field; however, inaccuracies in the UTLS ozone distribution translate into an uncertainty in factors such as the calculated radiative forcing of climate or the inferred stratosphere-troposphere exchange (STE) of ozone. The 3D ozone data assimilation system, from NASA's Global Modeling and Assimilation Office (GMAO), combines observations of total ozone column and stratospheric profiles with predictions from an off-line, parameterized chemistry and transport model (pCTM) to produce six-hourly, global analyses. The first experiments discussed assimilate ozone retrievals from the Earth-Probe Total Ozone Mapping Spectrometer (EPTOMS) and stratospheric profiles from the Solar Backscatter UltraViolet/2 (SBUV/2) instrument. The SBUV/2 ozone data have a coarse vertical resolution, with increased uncertainty below the ozone maximum, and TOMS provides only total ozone columns. Thus, the assimilated ozone profiles in the UTLS region are only weakly constrained by the incoming SBUV and TOMS data. Consequently, the assimilated ozone distribution should be sensitive to changes in inputs to the statistical analysis scheme. Sensitivity studies have been conducted to examine the responses to TOMS and SBUV/2 data selection, modifications of the forecast and observation error covariance models, and the model formulation (turning off chemistry or using different wind analyses in the pCTM). The second set of experiments includes an additional data type: ozone retrieved from infrared limb-emission by MIPAS on Envisat. These data offer not only improved vertical resolution in the stratosphere, but also give measurements in the polar night. Comparisons of the assimilated ozone fields from both sets of experiments with independent observations, primarily ozone sondes, are used to determine the impact of each of these changes. It is shown that many of the changes have a significant impact on the UTLS ozone estimates. Implications for interpretation of STE and radiative forcing of climate are discussed.

Pawson, Steven↗
NASA NTRS1997

Database Development for Electrical, Electronic, and Electromechanical (EEE) Parts for the International Space Station Alpha

More effective electronic communication processes are needed to transfer contractor and international partner data into NASA and prime contractor baseline database systems. It is estimated that the International Space Station Alpha (ISSA) parts database will contain up to one million parts each of which may require database capabilities for approximately one thousand bytes of data for each part. The resulting gigabyte database must provide easy access to users who will be preparing multiple analyses and reports in order to verify as-designed, as-built, launch, on-orbit, and return configurations for up to 45 missions associated with the construction of the ISSA. Additionally, Internet access to this data base is strongly indicated to allow multiple user access from clients located in many foreign countries. This summer's project involved familiarization and evaluation of the ISSA Electrical, Electronic, and Electromechanical (EEE) Parts data and the process of electronically managing these data. Particular attention was devoted to improving the interfaces among the many elements of the ISSA information system and its global customers and suppliers. Additionally, prototype queries were developed to facilitate the identification of data changes in the data base, verifications that the designs used only approved parts, and certifications that the flight hardware containing EEE parts was ready for flight. This project also resulted in specific recommendations to NASA for further development in the area of EEE parts database development and usage.

Wassil-Grimm, Andrew D.↗
NASA NTRS2001

Analysis of Ag/FEP Control Blanket Performance from Multiple Satellites

Published data reporting the change in solar absorptance as a function of time on orbit for certain satellites has been re-examined. The optical property change of metallized FEP as a function of total particulate radiation dose received by specific satellites has been estimated. Results tend to follow a common trend and a design curve has been constructed to estimate solar absorptance change as a function of radiation dose for metallized FEP at any altitude. Effects due to apparent contamination on several of the satellites are addressed and taken into account in determining property changes. Data from LDEF, ML-101, NavStar 1-5, NTS-2, the SCATHA experiment, and SOLRAD 11 are used as the basis of the design curve. A similar comparison is made between published atomic oxygen recession data from numerous Space Shuttle flights, a LEO experiment flown by Lockheed, and LDEF results. Variation of atomic oxygen recession rate of FEP as a function of exposure conditions is determined.

Pippin, H. G.↗