Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

VERA Core Simulator Methodology for PWR Cycle Depletion

This paper describes the methodology developed and implemented in MPACT for performing high-fidelity pressurized water reactor (PWR) multi-cycle core physics calculations. MPACT is being developed primarily for application within the Consortium for the Advanced Simulation of Light Water Reactors (CASL) as one of the main components of the VERA Core Simulator, the others being COBRA-TF and ORIGEN. The methods summarized in this paper include a methodology for performing resonance self-shielding and computing macroscopic cross sections, 2-D/1-D transport, nuclide depletion, thermal-hydraulic feedback, and other supporting methods. These methods represent a minimal set needed to simulate high-fidelity models of a realistic nuclear reactor. Results demonstrating this are presented from the simulation of a realistic model of the first cycle of Watts Bar Unit 1. The simulation, which approximates the cycle operation, is observed to be within 50 ppm boron (ppmB) reactivity for all simulated points in the cycle and approximately 15 ppmB for a consistent statepoint. The verification and validation of the PWR cycle depletion capability in MPACT is the focus of two companion papers.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2018

Pronghorn: A Porous Media Thermal-Hydraulics Core Simulator and its Validation with the SANA Experiments

Pebble bed High Temperature Reactors (HTRs) are characterized by many advantageous design features, such as excellent passive heat removal in accidents, large margins to fuel failure, and online refueling potential. However, a significant challenge in the core modeling of pebble bed reactors is the complex fuel-coolant structure. This paper presents a new porous media simulation code, Pronghorn, that aims to alleviate modeling challenges for pebble bed reactors by providing a fast-running, medium- fidelity core simulator. Pronghorn is intended to accelerate the design and analysis cycle for pebble bed and prismatic HTRs by permitting fast scoping studies and providing boundary conditions for systems-level analysis. Pronghorn is built on the Multiphysics Object-Oriented Simulation Environment (MOOSE) using modern software practices and a thorough testing framework. This paper describes the physical models used in Pronghorn and demonstrates Pronghorn’s capability for modeling gas-cooled pebble bed HTRs by presenting simulation results obtained for the German SANA pebble bed decay heat experiments. Within the limitations of the porous media approximation and existing available closure relationships, Pronghorn predicts the SANA experimental pebble temperatures well, expanding the code’s validation base. A brief code-to-code comparison shows a similar level of accuracy with other porous media simulation tools; this enhances Pronghorn’s advantages of an arbitrary equation of state, unstructured mesh capabilities, compressible flow models, high coupling potential to MOOSE fuels performance and systems-level thermal-hydraulics codes, and modern software design.

42 ENGINEERING↗
DOE OSTI2016

Computational and Experimental Examination of Simulated Core Damage and Relocation Dynamics of a BWR Fuel Assembly - 16013

The Japan Atomic Energy Agency (JAEA) plans a large-scale test to evaluate damage and relocation behavior of Boiling Water Reactor (BWR) core materials consisting of fuel rods (zirconia as fuel simulant), channel boxes, control blade assemblies as well as lower core-support structures. Its purpose is to contribute to the understanding of the core material relocation behavior in the event of severe accidents with the BWR design conditions for which existing experimental database is quite limited. Prior to large-scale testing anticipated at JAEA in the future, JAEA desires preliminary investigations to examine melting test pieces, being composed of a mixture of zirconia and metals by a non-transferred thermal plasma heating system. The purpose of such tests is to verify the materials and test piece will be heated by plasma as a primary heat source to the target temperature of ca. 2900 K and to collect data about the relocation behavior of the high-temperature materials. This paper describes the first in a series of tests demonstrating the effective use of thermal plasma technology to recreate the dynamics of a typical fuel core bundle channel assembly section. Results from preliminary computational simulations of simplified fuel bundle assemblies are presented illustrating the effectiveness of a 150 kW, non transferred (NTR) configuration of a thermal plasma argon jet to heat the assembly within a highly-insulated containment vessel. An experimental test program using the computational analyses as a basis and a Phoenix Solutions Co (PSC) commercial model PT150, 150 kW plasma torch is described and the test results are presented illustrating the time versus temperature history of the fuel bundle assembly melting dynamics. Details on plasma operation are discussed including: power requirements, current flow, voltage levels achieved, argon gas flow rates, processing times and standoff distances of the torch discharge from the top of the fuel bundle assembly (achieved with remote control of the axial (vertical) translation of the torch within the containment processing chamber). Photos taken from the top of the processing chamber are presented illustrating the various phases of melting characteristics of the zircaloy-clad, zirconium oxide filled fuel tubes, all within a stainless steel tube bundle channel centered within an insulated zirconia crucible. Based on lessons learned from this initial test campaign, a brief discussion of the requirements and features of a follow-on Phase II test program is provided. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Future projections in tropical cyclone activity over multiple CORDEX domains from RegCM4 CORDEX-CORE simulations

The characteristics of tropical cyclone (TC) activity over five TC basins lying within four Coordinated Regional Downscaling Experiment (CORDEX) domains are examined for present and future climate conditions using a new ensemble of simulations completed as part of the CORDEX-CORE initiative with the regional climate model RegCM4. The simulations are conducted at a 25 km horizontal grid spacing and are driven by three CMIP5 general circulation models (GCMs) under two Representative Concentration Pathways (RCP2.6 and RCP8.5). The RegCM4 captures most features of the observed TC climatology, except for the TC intensity, which is thus statistically adjusted using a bias correction procedure to account for the effect of the coarse model resolution. The RegCM4 exhibits an improved simulation of several TC statistics compared to the driving GCMs, over most basins analyzed. In future climate conditions we find significant increases in TC frequency over the North Indian Ocean, the Northwest Pacific and Eastern Pacific regions, which are consistent with an increase in mid-tropospheric relative humidity. The North Atlantic and Australasia regions show a decrease in TC frequency, mostly associated with an increase in wind shear. We also find a consistent increase in future storm rainfall rates associated with TCs and in the frequency of the most intense TCs over most domains. Finally, our study shows robust responses often, but not always, in line with previous studies, still implying the presence of significant uncertainties in the projection of TC characteristics, which need to be addressed using large ensembles of simulations with high-resolution models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Molten salt reactor core simulation with PROTEUS

The Nuclear Energy Advance Modeling and Simulation Program (NEAMS) of the US Department of Energy (DOE) aims to develop advanced simulation tools to aid the development of advanced nuclear technologies. The high-fidelity PROTEUS code was developed in the NEAMS program for reactor physics analysis. This paper tests the applicability of the PROTEUS code to simulate a Molten Salt Reactor (MSR). The OpenMC code based on the Monte Carlo Method was employed to generate the cross sections and to provide stochastic solutions for verification. The PROTEUS code was successfully employed to simulate the steady-state performance of an MSR represented by the ThorCon core design. The 2D lattice, 2D core, and 3D full core calculations performed by PROTEUS show good agreement with that predicted by OpenMC. Furthermore, for the nodal option within PROTEUS, the precursor drift model was also tested, and this effect resulted in a reduction of the k-eff by 300 pcm.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Reactor physics benchmark of Westinghouse PWR core design suite for high burnup/high enrichment fuel - Part 2: 2D and 3D core simulations

Westinghouse has performed a comprehensive set of code-to-code benchmark comparisons to corroborate application of its state-of-the-art NEXUS-based code suite to high burnup and high enrichment (HB/HE) fueled PWR core design and reload analysis. The benchmark consisted of a progression in complexity from modeling single 2D pin cells, through 2D lattices and finally to whole core 2D and then 3D scenarios. The accompanying paper (Part 1) presented the results for a variety of pin cell and lattices representative of high energy cores and established the ability of the MPACT code to accurately match the predictions of the Monte-Carlo code SERPENT2 such that the former may be used as a surrogate reference code in spatially complex whole core modeling applications where using Monte-Carlo methods is somewhat impractical. This paper focuses on comparisons at the whole core level using a representative high power density 3-loop Westinghouse NSSS core operating for 24 month cycles employing high enriched fuel with use of combined burnable absorbers to hold down excess reactivity. The evolution of the core reactivity and power distribution characteristics throughout the cycle are calculated using the Westinghouse NEXUS-based code suite and compared to the results using MPACT. The results of this whole core benchmark confirm the conclusions that the Westinghouse code suite accurately models HB/HE fuel designs, with very good prediction of core reactivity and power distribution throughout the cycle. The industry can be confident that the NEXUS code system can be deployed to support PWR reload safety and operational analyses for cores featuring HB/HE fuel and 24-month cycle operation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Future projections in the climatology of global low-level jets from CORDEX-CORE simulations

The potential changes in the strength and location of five low-level jets (LLJs) located within four Coordinated Regional Climate Downscaling Experiment (CORDEX) domains are examined for present and future climate conditions using an ensemble of simulations conducted with the RegCM4 regional model at a 25 km horizontal grid spacing. Lateral and lower boundary forcing fields are from three General Circulation Models (GCMs), and we analyse a historical period (1995–2014) along with two future periods (2041–2060 and 2080–2099) under the Representative Concentration Pathways 2.6 and 8.5. The RegCM4, as driven by the GCMs, is capable of capturing most of the observed climatological features of the LLJs, both in terms of spatial location and seasonal evolution. Analysis of the influence of global warming on the LLJs shows a consistent strengthening of the jets and a shift in their location under both warming scenarios. The Monsoon and West African westerly LLJs exhibit a northward shift, while the Caribbean and South American LLJs present a westward expansion. The use of an ensemble of high-resolution simulations is found to provide a key element for a robust assessment of changes in LLJs associated with future global warming scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Neutron transport methods for multiphysics heterogeneous reactor core simulation in Griffin

Griffin is a reactor physics application based on the Multiphysics Object-Oriented Simulation Environment (MOOSE). This work discloses the methods, algorithms, and implementation for simulating heterogeneous reactor dynamics models. Griffin utilizes a discontinuous finite-element method with discrete ordinates (DFEM-S ) to discretize the field variable of the multigroup neutron transport equation. Multiphysics feedback is handled using two-step tabulated cross-section methodology. Feedback quantities are evaluated using the MOOSE-MultiApp system to couple various engineering phenomena, such as heat conduction and thermal fluids. The multiphysics DFEM-S system is solved using fixed-point iteration with a fully asynchronous parallel sweeper, unstructured coarse-mesh finite difference acceleration, and a multi-timescale improved quasi-static method scheme. The implementation is applied to a multiphysics microreactor model, with two transients: one initiated by a single heat-pipe failure and another by control drum rotation. Importantly, these examples demonstrate the ability of Griffin to tractably solve the neutron transport equation considering seven independent variables and feedback.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Formulation and preparation of Hanford Waste Treatment Plant direct feed low activity waste Effluent Management Facility core simulant

The Hanford Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) vitrification facility will generate an aqueous condensate recycle stream (LAW Melter Off-Gas Condensate, LMOGC) from the off-gas system. The baseline plan for disposition of this stream during full WTP operations is to send it to the WTP Pretreatment Facility, where it will be blended with LAW, concentrated by evaporation and recycled to the LAW vitrification facility. However, during the Direct Feed LAW (DFLAW) scenario, planned disposition of this stream is to evaporate it in a new evaporator in the Effluent Management Facility (EMF) and then return it to the LAW melter. It is important to understand the composition of the effluents from the melter and new evaporator so that the disposition of these streams can be accurately planned and accommodated. Furthermore, alternate disposition of the LMOGC stream would eliminate recycling of problematic components, and would enable less integrated operation of the LAW melter and the Pretreatment Facilities. Alternate disposition would also eliminate this stream from recycling within WTP when it begins operations and would decrease the LAW vitrification mission duration and quantity of glass waste, amongst the other problems such a recycle stream present. This LAW Melter Off-Gas Condensate stream will contain components that are volatile at melter temperatures and are problematic for the glass waste form, such as halides and sulfate. Because this stream will recycle within WTP, these components accumulate in the Melter Condensate stream, exacerbating their impact on the number of LAW glass containers that must be produced. Diverting the stream reduces the halides and sulfate in the recycled Condensate and is a key outcome of this work. This overall program examines the potential treatment and immobilization of this stream to enable alternative disposal. The objective of this task was to formulate and prepare a simulant of the LAW Melter Off-gas Condensate expected during DFLAW operations. That simulant can be used in evaporator testing to predict the composition of the effluents from the Effluent Management Facility (EMF) evaporator to aid in planning for their disposition. This document describes the method used to formulate a simulant of this LAW Melter Off-Gas Condensate stream, which, after pH adjustment, is the feed to the evaporator in the EMF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Phase 1 Testing Results of Immobilization of WTP Effluent Management Facility Evaporator Bottoms Core Simulant

The Hanford Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) vitrification facility will generate an aqueous condensate recycle stream (LAW Melter Off-Gas Condensate) from the off-gas system. The baseline plan for disposition of this stream during full WTP operations is to send it to the WTP Pretreatment Facility, where it will be blended with LAW, concentrated by evaporation and recycled to the LAW vitrification facility. However, during the Direct Feed LAW (DFLAW) scenario, planned disposition of this stream is to evaporate it in a new evaporator in the Effluent Management Facility (EMF) and then return it to the LAW melter. It is important to understand the composition of the effluents from the melter and new evaporator so that the disposition of these streams can be accurately planned and accommodated. Furthermore, alternate disposition of this stream would eliminate recycling of problematic components, and would enable less integrated operation of the LAW melter and the Pretreatment Facilities. Alternate disposition would also eliminate this stream from recycling within WTP when it begins operations and would decrease the LAW vitrification mission duration and quantity of glass waste. This LAW Melter Off-Gas Condensate stream will contain components that are volatile at melter temperatures and are problematic for the glass waste form, such as halides and sulfate, along with entrained, volatile, and semi-volatile metals, such as Hg, As, and Se. Because this stream will recycle within WTP, these components accumulate in the Melter Condensate stream, exacerbating their impact on the number of LAW glass containers that must be produced. Diverting the stream reduces the halides and sulfate that get recycled to the melter, and is a key objective of this work. This overall program examines the potential treatment and immobilization of this stream to enable alternative disposal. The objective of earlier tasks was to formulate and prepare a simulant of the LAW Melter Off-gas Condensate expected during DFLAW operations and use it in evaporator testing to predict the composition of the effluents from the Effluent Management Facility (EMF) evaporator to aid in planning for their disposition. The objective of this task was to test immobilization options for this evaporator bottoms aqueous stream. This document describes the method used to formulate a simulant of this EMF evaporator bottoms stream, immobilize it, and determine if the immobilized waste forms meet disposal criteria.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗