Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “contact model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Alternative methods to model frictional contact surfaces using NASTRAN

Elongated (slotted) holes have been used extensively for the integration of equipment into Spacelab racks. In the past, this type of interface has been modeled assuming that there is not slippage between contact surfaces, or that there is no load transfer in the direction of the slot. Since the contact surfaces are bolted together, the contact friction provides a load path determined by the normal applied force (bolt preload) and the coefficient of friction. Three alternate methods that utilize spring elements, externally applied couples, and stress dependent elements are examined to model the contacted surfaces. Results of these methods are compared with results obtained from methods that use GAP elements and rigid elements.

Hoang, Joseph↗
DOE OSTI2023

Transient pattern formation in an active matter contact poisoning model

Abstract One of the most notable features in repulsive particle based active matter systems is motility-induced-phase separation (MIPS) where a dense, often crystalline phase and low density fluid coexist. Most active matter studies involve time-dependent activity; however, there are many active systems where individual particles transition from living or moving to dead or nonmotile due to lack of fuel, infection, or poisoning. Here we consider an active matter particle system at densities where MIPS does not occur. When we add a small number of infected particles that can poison other particles, rendering them nonmotile, we find a rich variety of time dependent pattern formation, including MIPS, a wetting phase, and a fragmented state formed when mobile particles plow through a nonmotile packing. We map the patterns as a function of time scaled by epidemic duration, and show that the pattern formation is robust for a wide range of poisoning rates and activity levels. We also show that pattern formation does not occur in a random death model, but requires the promotion of nucleation by contact poisoning. Our results should be relevant to biological and active matter systems where there is some form of poisoning, death, or transition to nonmotility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2003

Predictive models for moving contact line flows

Modeling flows with moving contact lines poses the formidable challenge that the usual assumptions of Newtonian fluid and no-slip condition give rise to a well-known singularity. This singularity prevents one from satisfying the contact angle condition to compute the shape of the fluid-fluid interface, a crucial calculation without which design parameters such as the pressure drop needed to move an immiscible 2-fluid system through a solid matrix cannot be evaluated. Some progress has been made for low Capillary number spreading flows. Combining experimental measurements of fluid-fluid interfaces very near the moving contact line with an analytical expression for the interface shape, we can determine a parameter that forms a boundary condition for the macroscopic interface shape when Ca much les than l. This parameter, which plays the role of an "apparent" or macroscopic dynamic contact angle, is shown by the theory to depend on the system geometry through the macroscopic length scale. This theoretically established dependence on geometry allows this parameter to be "transferable" from the geometry of the measurement to any other geometry involving the same material system. Unfortunately this prediction of the theory cannot be tested on Earth.

Rame, Enrique↗
NASA NTRS2011

Mesh-Based Entry Vehicle and Explosive Debris Re-Contact Probability Modeling

The risk to a crewed vehicle arising from potential re-contact with fragments from an explosive breakup of any jettisoned spacecraft segments during entry has long sought to be quantified. However, great difficulty lies in efficiently capturing the potential locations of each fragment and their collective threat to the vehicle. The method presented in this paper addresses this problem by using a stochastic approach that discretizes simulated debris pieces into volumetric cells, and then assesses strike probabilities accordingly. Combining spatial debris density and relative velocity between the debris and the entry vehicle, the strike probability can be calculated from the integral of the debris flux inside each cell over time. Using this technique it is possible to assess the risk to an entry vehicle along an entire trajectory as it separates from the jettisoned segment. By decoupling the fragment trajectories from that of the entry vehicle, multiple potential separation maneuvers can then be evaluated rapidly to provide an assessment of the best strategy to mitigate the re-contact risk.

McPherson, Mark A.↗
DOE OSTI2025

Sensitivity analysis of thermal contact conductance modeling to inform MiniFuel irradiation capsule designs

The MiniFuel irradiation platform has been developed by Oak Ridge National Laboratory as a flexible, high-throughput separate effects testing capability within the High Flux Isotope Reactor (HFIR). Finite element thermal models are relied upon to design MiniFuel experiments to achieve a specific time-averaged irradiation temperature for experimental objectives. A previous study identified that uncertainty in the component heat generation rates and thermal contact conductance (TCC) model are the most significant contributors to predicted fuel temperature variance. To address both sources of uncertainty, this work performs sensitivity analysis on the TCC model to identify high-impact, high-uncertainty parameters that contribute to fuel temperature variance. The TCC model is analyzed in increasing detail, first using a standalone Python code, then again after coupling Python to the BISON fuel performance code. Furthermore, the parameters with the largest contributions to fuel temperature variance which can be reduced through design changes are identified as the initial subcapsule gas pressure, contact pressure between the fuel and dish, and the effective surface roughness of the interface. A set of design recommendations for future capsule designs has been established and applied to reduce the previously quantified average fuel temperature uncertainty ranges of ± 40 °C in the HFIR vertical experiment facilities (VXF) and ± 80 °C in the removable beryllium (RB) reflector to approximately ± 32 °C and ± 53 °C, respectively. This equates to a 21 % and 33 % reduction in the uncertainty range of the average fuel temperature for VXF and RB, respectively.

BISON↗
DOE OSTI2023

Implementation of low-burnup swelling focused assessment case and enhancement of FIPD-BISON integration framework

This report summarizes the activities and achievements made by Argonne National Laboratory for the Nuclear Energy Advanced Modeling and Simulation (NEAMS) BISON code metallic fuel validation and verification (V&V) project in FY2023, with a focus on the capability development and assessment case development for steady state irradiation experiments. The X423 IFR experiment assessment case, which is focused on the evaluation of low burnup swelling behavior of both binary and ternary metallic fuel, has been developed. It covers 58 fuel pins with various fuel compositions and 158 sets of post-irradiation examination (PIE) data with burnup ranging from ~0.5 at.% to ~5.0 at.%, providing a powerful tool within BISON for the calibration, evaluation, verification and validation of both existing and future metallic fuel swelling models at low burnup. Meanwhile, the X447 IFR experiment assessment case established in FY2022 was enhanced to utilize the latest advanced features in BISON, such as automatic differentiation and Mortar contact models. With such enhancements, especially the Mortar mechanical contact model with friction, BISON is now capable of predicting axial fuel growth that is consistent with experimental measurements. Additionally, during the development, gaps and potential scopes were identified and explorative efforts were made, providing insight for future works.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Dynamical responses of constrained pipe conveying fluids and its dependence on the modeling of the contact force

Accurately modeling the impact force used in the analysis of loosely constrained cantilevered pipes conveying fluid is imperative. If little information is known of the motion-limiting constraints used in experiments, the analysis of the system may yield inaccurate predictions. Here in this work, multiple forcing representations of the impact force are defined and analyzed for a cantilevered pipe that conveys fluid. Depending on the representation of the impact force, the dynamics of the pipe can vary greatly when only the stiffness of the constraints is known from experiments. Three gap sizes of the constraints are analyzed, and the representation of the impact force used to analyze the system is found to significantly affect the response of the pipe at each gap size. An investigation on the effects of the vibro-impact force representation is performed through using basin of attraction analysis and nonlinear characterization of the system’s response.

42 ENGINEERING↗
DOE OSTI2020

Population genomics and history of speciation reveal fishery management gaps in two related redfish species ( Sebastes mentella and Sebastes fasciatus )

Abstract Understanding the processes shaping population structure and reproductive isolation of marine organisms can improve their management and conservation. Using genomic markers combined with estimation of individual ancestries, assignment tests, spatial ecology, and demographic modeling, we (i) characterized the contemporary population structure, (ii) assessed the influence of space, fishing depth, and sampling years on contemporary distribution, and (iii) reconstructed the speciation history of two cryptic redfish species, Sebastes mentella and S. fasciatus . We genotyped 860 individuals in the Northwest Atlantic Ocean using 24,603 filtered single nucleotide polymorphisms (SNPs). Our results confirmed the clear genetic distinctiveness of the two species and identified three ecotypes within S. mentella and five populations in S. fasciatus . Multivariate analyses highlighted the influence of spatial distribution and depth on the overall genomic variation, while demographic modeling revealed that secondary contact models best explained inter‐ and intragenomic divergence. These species, ecotypes, and populations can be considered as a rare and wide continuum of genomic divergence in the marine environment. This acquired knowledge pertaining to the evolutionary processes driving population divergence and reproductive isolation will help optimizing the assessment of demographic units and possibly to refine fishery management units.

Benestan, Laura M.↗
DOE OSTI2023

Improved Fuel Particle and Compact Matrix Fission Product Release Prediction with Improved Mass Transfer Model

This study was motivated by the need to incorporate more physics-based mass transfer models in BISON in order to improve fuel particle and compact matrix fission product release prediction. This document details the integration of new modeling capabilities in BISON, including (1) development of sorption mass transfer models; improvement of thermal contact model by adding neon to the gas gap inventory, (3) implementation of PCEA and IG-110 graphite thermal models, (4) validation using Advanced Gas Reactor (AGR)-3/4 compact and capsule rings data. These new capabilities have been shown to enforce the desired physics with satisfactory accuracy. BISON’s predictions of fission product release of AGR-3/4 compacts compare favorably with PARFUME and the concentration profiles across capsule rings show reasonable trend to the experiment measurement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2013

Basic Operational Robotics Instructional System

The Basic Operational Robotics Instructional System (BORIS) is a six-degree-of-freedom rotational robotic manipulator system simulation used for training of fundamental robotics concepts, with in-line shoulder, offset elbow, and offset wrist. BORIS is used to provide generic robotics training to aerospace professionals including flight crews, flight controllers, and robotics instructors. It uses forward kinematic and inverse kinematic algorithms to simulate joint and end-effector motion, combined with a multibody dynamics model, moving-object contact model, and X-Windows based graphical user interfaces, coordinated in the Trick Simulation modeling environment. The motivation for development of BORIS was the need for a generic system for basic robotics training. Before BORIS, introductory robotics training was done with either the SRMS (Shuttle Remote Manipulator System) or SSRMS (Space Station Remote Manipulator System) simulations. The unique construction of each of these systems required some specialized training that distracted students from the ideas and goals of the basic robotics instruction.

Todd, Brian Keith↗
DOE OSTI2024

A high-resolution pseudo-polygon discrete element model for regional sea ice

Here, this work presents a pseudo-polygon discrete element model for high-resolution sea ice simulations. A scale-invariant bonded particle contact model is proposed to model joints between sea ice floes based on the smeared fracture model and a lattice spring beam model, and the Mohr–Coulomb failure criterion is implemented to represent the shearing failure mechanism of sea ice packings under complex loadings. All mechanical parameters of the bond model can be directly determined from laboratory tests. Validations of the proposed model are made by investigations of mechanical response and failure criteria of field sea ice sheets. Compared with the field observations of sea ice from satellite radar and in situ stress sensors, the proposed model is capable of reproducing the typical constitutive behavior and the Coulomb friction envelope of field sea ice. Finally, the proposed discrete element sea ice model is used to study the effect of loading rates on mechanical behavior including failure strength of regional sea ice.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Statistical Analysis of Intertube Tunneling Contacts in the Macroscopic Electrical Conductivity of Carbon Nanotube Fibers

Here, this study investigates the influence of tunneling contact resistances between carbon nanotubes (CNTs) on electron transport and electrical conductivity of macroscopic carbon nanofibers (CNFs), which profoundly impacts the performance of CNT thin film electronics, CNF electron emitters and cathodes, and energy conversion and storage devices. Utilizing a self-consistent electrical contact model coupling a transmission line model with tunneling current, we calculate the contact resistances of a plethora of CNT-CNT contacts within a CNF fiber, which consists of aligned, densely packed CNTs. A statistical analysis is conducted, using Gaussian distributions to account for variations in contact lengths, tunneling gap distances, and single CNT aspect ratios, to calculate the CNT-CNT contact resistance and the overall resistance of CNT fiber. By scaling our model to a macroscopic level, our results are in good agreement with experimental measurements. Our calculation suggests that while increasing the contact overlap length diminishes individual CNT-CNT contact resistance, it could paradoxically increase macroscopic CNT fiber resistance for a given constant CNF mass density, which is due to that fact that a larger overlap length allows more CNTs to pack along an electrical conduction path per unit length, leading to more tunneling contact junctions connected in series and thus less number of parallel conduction paths within the fiber cross section. Increasing tunneling gap distance increases both individual contact and overall fiber resistance. This research provides a simple design tool for tailoring CNT fiber electrical properties to promote real-world applications using CNTs or similar low-dimensional materials.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Kinematic stability of roller pairs in free rolling contact

A set of generalized stability equations was developed for roller pairs in free rolling contact. A symmetric, dual contact model was used. Four possible external contact profiles that possess continuous contacting surfaces were studied. It was found that kinematic stability would be insured if the larger radius of transverse curvature, in absolute value, and the smaller rolling radius both exist on the roller that has the apex of its conical surface outboard of its main body. The stability criteria developed are considered to be useful for assessing axial restraint requirements for a variety of roller mechanisms and in the selection of roller contact geometry for traction drive devices.

Savage, M.↗
NASA NTRS1979

A rheological model for elastohydrodynamic contacts based on primary laboratory data

A shear rheological model based on primary laboratory data is proposed for concentrated contact lubrication. The model is a Maxwell model modified with a limiting shear stress. Three material properties are required: Low shear stress viscosity, limiting elastic shear modulus, and the limiting shear stress the material can withstand. All three are functions of temperature and pressure. In applying the model to EHD contacts the predicted response possesses the characteristics expected from several experiments reported in the literature and, in one specific case where direct comparison could be made, good numerical agreement is shown.

Bair, S.↗
DOE OSTI2023

Computational design of metamaterials with self contact

Inverse homogenization in combination with contact modeling, topology optimization and shape optimization is used to design metamaterials with optimized macroscopic response. The homogenization assumes length scale separation which allows the non-linear macroscopic behavior to be obtained by analyzing a single unit cell in a lattice structure. Self contact in the unit cell, which is modeled using a third medium contact method, is leveraged to obtain a complex homogenized response. The inverse homogenization problem is initially formulated as a topology optimization problem, where the macroscopic stress–strain behavior is tuned to our liking. However, it is well known that boundary phenomena are difficult to model in topology optimization and that interface modeling is crucial to accurately analyze contact. For that reason, the boundary representation of the topology optimized design is extracted and used as initial design in a subsequent shape optimization. The behaviors of our designs are verified by performing rigorous post-processing analyzes using conforming meshes and conventional contact formulations.

42 ENGINEERING↗