SEARCH · Engineering Papers
Results for “colloidal quantum dot”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Reducing charge trapping in PbS colloidal quantum dot solids
Understanding and improving charge transport in colloidal quantum dot solids is crucial for the development of efficient solar cells based on these materials. In this paper, we report high performance field-effect transistors based on lead-sulfide colloidal quantum dots (PbS CQDs) crosslinked with 3-mercaptopropionic acid (MPA). Electron mobility up to 0.03 cm{sup 2}/Vs and on/off ratio above 10{sup 5} was measured; the later value is the highest in the literature for CQD Field effect transistors with silicon-oxide gating. This was achieved by using high quality material and preventing trap generation during fabrication and measurement. We show that air exposure has a reversible p-type doping effect on the devices, and that intrinsically MPA is an n-type dopant for PbS CQDs.
Colloidal quantum dot solar cells on curved and flexible substrates
Colloidal quantum dots (CQDs) are semiconductor nanocrystals synthesized with, processed in, and deposited from the solution phase, potentially enabling low-cost, facile manufacture of solar cells. Unfortunately, CQD solar cell reports, until now, have only explored batch-processing methods—such as spin-coating—that offer limited capacity for scaling. Spray-coating could offer a means of producing uniform colloidal quantum dot films that yield high-quality devices. Here, we explore the versatility of the spray-coating method by producing CQD solar cells in a variety of previously unexplored substrate arrangements. The potential transferability of the spray-coating method to a roll-to-roll manufacturing process was tested by spray-coating the CQD active layer onto six substrates mounted on a rapidly rotating drum, yielding devices with an average power conversion efficiency of 6.7%. We further tested the manufacturability of the process by endeavoring to spray onto flexible substrates, only to find that spraying while the substrate was flexed was crucial to achieving champion performance of 7.2% without compromise to open-circuit voltage. Having deposited onto a substrate with one axis of curvature, we then built our CQD solar cells onto a spherical lens substrate having two axes of curvature resulting in a 5% efficient device. These results show that CQDs deposited using our spraying method can be integrated to large-area manufacturing processes and can be used to make solar cells on unconventional shapes.
Enhanced Thermal Stability of Conductive Mercury Telluride Colloidal Quantum Dot Thin Films Using Atomic Layer Deposition
Colloidal quantum dots (CQDs) are valuable for their potential applications in optoelectronic devices. However, they are susceptible to thermal degradation during processing and while in use. Mitigating thermally induced sintering, which leads to absorption spectrum broadening and undesirable changes to thin film electrical properties, is necessary for the reliable design and manufacture of CQD-based optoelectronics. Here, low-temperature metal–oxide atomic layer deposition (ALD) was investigated as a method for mitigating sintering while preserving the optoelectronic properties of mercury telluride (HgTe) CQD films. ALD-coated films are subjected to temperatures up to 160 °C for up to 5 h and alumina (Al 2 O 3 ) is found to be most effective at preserving the optical properties, demonstrating the feasibility of metal–oxide in-filling to protect against sintering. HgTe CQD film electrical properties were investigated before and after alumina ALD in-filling, which was found to increase the p-type doping and hole mobility of the films. The magnitude of these effects depended on the conditions used to prepare the HgTe CQDs. With further investigation into the interaction effects of CQD and ALD process factors, these results may be used to guide the design of CQD–ALD materials for their practical integration into useful optoelectronic devices.
Two-band optical gain and ultrabright electroluminescence from colloidal quantum dots at 1000 A cm−2
Abstract Colloidal quantum dots (QDs) are attractive materials for the realization of solution-processable laser diodes. Primary challenges towards this objective are fast optical-gain relaxation due to nonradiative Auger recombination and poor stability of colloidal QD solids under high current densities required to obtain optical gain. Here we resolve these challenges and achieve broad-band optical gain spanning the band-edge (1S) and the higher-energy (1P) transitions. This demonstration is enabled by continuously graded QDs with strongly suppressed Auger recombination and a current-focusing device design, combined with short-pulse pumping. Using this approach, we achieve ultra-high current densities (~1000 A cm −2 ) and brightness (~10 million cd m −2 ), and demonstrate an unusual two-band electroluminescence regime for which the 1P band is more intense than the 1S feature. This implies the realization of extremely large QD occupancies of up to ~8 excitons per-dot, which corresponds to complete filling of the 1S and 1P electron shells.
Thermal Recovery of Colloidal Quantum Dot Ensembles Following Photoinduced Dimming
Colloidal CdSe quantum dot (QD) core ensembles were photodimmed and allowed to recover in the dark using ambient thermal energy at a range of temperatures. Nonlinear thermal recovery is well described by a stretched exponential function, and further analysis yields an underlying probability distribution of rate constants. Casting the rate constants as a collection of first-order activated processes provides an activation barrier probability distribution with significant density at room-temperature thermal energy that peaks at 200 meV before decaying to zero. This treatment for the recovery transition intuitively describes the distributed kinetics observed and complements commonly proposed blinking mechanisms.
Droop-Free Colloidal Quantum Dot Light-Emitting Diodes
Colloidal semiconductor quantum dots (QDs) are a highly promising materials platform for implementing solution-processable light-emitting diodes (LEDs). They combine high photostability of traditional inorganic semiconductors with chemical flexibility of molecular systems, which makes them well-suited for large-area applications such as television screens, solid-state lighting, and outdoor signage. Additional beneficial features include size-controlled emission wavelengths, narrow bandwidths, and nearly perfect emission efficiencies. State-of-the-art QD-LEDs exhibit high internal quantum efficiencies approaching unity. However, these peak values are observed only at low current densities (J) and correspondingly low brightnesses, whereas at higher J, the efficiency usually exhibits a quick roll-off. This efficiency droop limits achievable brightness levels and decreases device longevity due to excessive heat generation. We demonstrate QD-LEDs operating with high internal efficiencies (up to 70%) virtually droop-free up to unprecedented brightness of >100,000 cd m –2 (at ~500 mA cm –2 ). This exceptional performance is derived from specially engineered QDs that feature a compositionally graded interlayer and a final barrier layer. This QD design allows for improved balance between electron and hole injections combined with considerably suppressed Auger recombination, which helps mitigate efficiency losses due to charge imbalance at high currents. Finally, these results indicate a significant potential of newly developed QDs as enablers of future ultrabright, highly efficient devices for both indoor and outdoor applications.
Surface band bending and carrier dynamics in colloidal quantum dot solids
Evidence for band bending in colloidal quantum dot (CQD) solids is shown using photoemission surface photovoltage measurements, and carrier dynamics for a range of CQD solids are measured, correlating the results to surface chemistry.
The Effect of Monomer Size on Fusion and Coupling in Colloidal Quantum Dot Molecules
The fusion step in the formation of colloidal quantum dot molecules, constructed from two core/shell quantum dots, dictates the coupling strength and hence their properties and enriched functionalities compared to monomers. Herein, studying the monomer size effect on fusion and coupling, we observe a linear relation of the fusion temperature with the inverse nanocrystal radius. This trend, similar to that in nanocrystal melting, emphasizes the role of the surface energy. The suggested fusion mechanism involves intraparticle ripening where atoms diffuse to the reactive connecting neck region. Moreover, the effect of monomer size and neck filling on the degree of electronic coupling is studied by combined atomistic-pseudopotential calculations and optical measurements, uncovering strong coupling effects in small QD dimers, leading to significant optical changes. Understanding and controlling the fusion and hence coupling effect allows tailoring the optical properties of these nanoscale structures, with potential applications in photonic and quantum technologies.
Coupling of Infrared Active Colloidal Quantum Dots and Amorphous Selenium for Fast and Sensitive Photodetection
Colloidal quantum dot (CQD) based infrared (IR) photodetectors offer facile wavelength tunability in the IR and low-cost fabrication. However, owing to their large surface areas, CQDs intrinsically have significant surface traps critically affecting the speed of CQD photodetectors, typically mediated through tedious surface passivation efforts. In this report, an alternative strategy involving coupling of near-IR photoactive lead sulfide CQDs with a thermally evaporated amorphous selenium (a-Se) hole transport layer is proposed. By separating the detector into a photon absorbing CQD region and a charge transport a-Se region, the study takes advantage of the extremely low noise, predominantly hole-only transport process in a-Se. Here, a high 3 dB bandwidth of 2.5 MHz and a competitive specific detectivity of 2.5 × 10 11 Jones at room temperature are demonstrated at 980 nm. This report serves as a first demonstration of strong coupling between an IR active CQD absorber and a-Se, which paves the path to obtain fast and highly photoresponsive IR photodetection in the future.
Molecular surface programming of rectifying junctions between InAs colloidal quantum dot solids
Heavy-metal-free III–V colloidal quantum dots (CQDs) show promise in optoelectronics: Recent advancements in the synthesis of large-diameter indium arsenide (InAs) CQDs provide access to short-wave infrared (IR) wavelengths for three-dimensional ranging and imaging. In early studies, however, we were unable to achieve a rectifying photodiode using CQDs and molybdenum oxide/polymer hole transport layers, as the shallow valence bandedge (5.0 eV) was misaligned with the ionization potentials of the widely used transport layers. This occurred when increasing CQD diameter to decrease the bandgap below 1.1 eV. Here, we develop a rectifying junction among InAs CQD layers, where we use molecular surface modifiers to tune the energy levels of InAs CQDs electrostatically. Previously developed bifunctional dithiol ligands, established for II-VI and IV-VI CQDs, exhibit slow reaction kinetics with III-V surfaces, causing the exchange to fail. Here, we study carboxylate and thiolate binding groups, united with electron-donating free end groups, that shift upward the valence bandedge of InAs CQDs, producing valence band energies as shallow as 4.8 eV. Photophysical studies combined with density functional theory show that carboxylate-based passivants participate in strong bidentate bridging with both In and As on the CQD surface. The tuned CQD layer incorporated into a photodiode structure achieves improved performance with EQE (external quantum efficiency) of 35% (>1 μm) and dark current density < 400 nA cm -2 , a >25% increase in EQE and >90% reduced dark current density compared to the reference device. This work represents an advance over previous III-V CQD short-wavelength IR photodetectors (EQE < 5%, dark current > 10,000 nA cm -2 ).
Background limited mid-infrared photodetection with photovoltaic HgTe colloidal quantum dots
The photovoltaic response of thin films of HgTe colloidal quantum dots in the 3–5 μm range is observed. With no applied bias, internal quantum efficiency exceeding 40%, specific detectivity above 10{sup 10} Jones and microseconds response times are obtained at 140 K. The cooled devices detect the ambient thermal radiation. A detector with 5.25 μm cut-off achieves Background Limited Infrared Photodetection at 90 K.
Creation and Investigation of Organic Light-Emitting Structures Containing Arrays of Colloidal Quantum Dots
We have created organic electroluminescent structures—ITO/TPD/Alq3/Al and ITO/PEDOT:PSS/TPD/Alq3/Al—which are organic light-emitting diodes (OLEDs). Experiments on the incorporation of CdSe/ZnS colloidal quantum dots into the active layer of the structure have been performed. The parameters of the created structures have been determined using optical-spectroscopy methods. The appropriateness of using the method of high-speed vacuum thermal deposition as a main method for the deposition of structural layers has been demonstrated, and the possibility of accelerated formation of layers of the material without disturbing its chemical structure has been shown. By measuring the photoluminescence spectra at different points in samples, we have determined the quality of the obtained structures and plotted maps of the radiation power distribution of the material and of its thickness. Recommendations for the creation of upper contacts and other regions of light-emitting structures have been formulated. We have created organic structures with ITO/PEDOT:PSS/TPD/TPD + CQD’s CdSe/Alq3/Al colloidal quantum dots, in which electroluminescence of CdSe/ZnS quantum dots has been obtained for a wide range of applied voltages. It has been shown that the introduction of colloidal quantum dots into the structure leads to a significant modification of its electroluminescence spectrum.
Tracking Thermal Transport in Colloidal Quantum Dot Films Using in Situ Time-Resolved X-ray Diffraction
Colloidal quantum dots (QDs) and their thin films are increasingly used in electronic and photonic devices replacing traditional bulk semiconductors. However, thermal properties of QDs remain underexplored relative to device development efforts. This study shows the use of time-resolved X-ray diffraction as a contact-free method to probe the thermal response of QDs in environments representative of the active layer in QD optoelectronic devices, providing in situ insights for future thermal management strategies. Through the extraction of Debye–Waller factors on a subnanosecond time scale, we directly capture the heating and cooling of core/shell CdSe/CdS QDs following pulsed optical excitation. In a QD thin film that actively provides optical gain, the thermal conductivity is found to be as low as 0.13 W m –1 K –1 , because of the poor heat flow between close-packed QD solids. For QDs dispersed in liquids, interfacial thermal conductance dominates thermal relaxation, with a conductance of 15 MW m –2 K –1 .
Colloidal quantum dot lasers
We report semiconductor nanocrystals represent a promising class of solution-processable optical-gain media that can be manipulated via inexpensive, easily scalable colloidal techniques. Due to their extremely small sizes (typically <10 nm), their properties can be directly controlled via effects of quantum confinement; therefore, they are often termed colloidal quantum dots (CQDs). In addition to size-tunable emission wavelengths, CQDs offer other benefits for lasing applications, including low optical-gain thresholds and high temperature stability of lasing characteristics. Recent progress in understanding and practical control of processes impeding light amplification in CQDs has resulted in several breakthroughs, including the demonstration of optically pumped continuous-wave lasing, the realization of optical gain with direct current electrical injection and the development of dual-function electroluminescent devices that also operate as optically pumped lasers. The purpose of this Review is to assess the status of the field of CQD lasing and discuss the existing challenges and opportunities. A particular focus is on approaches for suppressing nonradiative Auger recombination, novel optical-gain concepts enabled by strong exciton-exciton interactions and controlled CQD charging, effects of nanocrystal form factors on light amplification and practical architectures for realizing electrically pumped CQD lasers. This overview suggests that the accumulated knowledge, along with the approaches developed for manipulating the optical-gain properties of colloidal nanostructures, perfectly position the CQD field for successfully addressing a long-standing challenge: the realization of CQD-based laser diodes. Colloidal quantum dots are promising materials for realizing versatile, wavelength-tunable, solution-processed lasers. This Review surveys recent advances in colloidal quantum dot lasing, provides an in-depth analysis of outstanding challenges and discusses a path forward to implementing technologically viable lasing devices.
Hybridization and deconfinement in colloidal quantum dot molecules
The structural, electronic, and optical properties of CdSe/CdS core–shell colloidal quantum dot molecules, a new class of coupled quantum dot dimers, are explored using atomistic approaches. Unlike the case of dimers grown by molecular beam epitaxy, simulated strain profile maps of free-standing colloidal dimers show negligible additional strain resulting from the attachment. Further, the electronic properties of the relaxed dimers are described within a semiempirical pseudopotential model combined with the Bethe–Salpeter equation within the static screening approximation to account for electron–hole correlations. The interplay of strain, hybridization (tunneling splitting), quantum confinement, and electron–hole binding energies on the optical properties is analyzed and discussed. The effects of the dimensions of the neck connecting the two quantum dot building blocks, as well as the shell thickness, are studied.
Conduction Band Fine Structure in Colloidal HgTe Quantum Dots
HgTe colloidal quantum dots (QDs) are of interest because quantum confinement of semimetallic bulk HgTe allows one to synthetically control the bandgap throughout the infrared. Here, we synthesize highly monodisperse HgTe QDs and tune their doping both chemically and electrochemically. The monodispersity of the QDs was evaluated using small-angle X-ray scattering (SAXS) and suggests a diameter distribution of similar to 10% across multiple batches of different sizes. Electron-doped HgTe QDs display an intraband absorbance and bleaching of the first two excitonic features. We see splitting of the intraband peaks corresponding to electronic transitions from the occupied 1S e state to a series of nondegenerate 1P e states. Spectroelectrochemical studies reveal that the degree of splitting and relative intensity of the intraband features remain constant across doping levels up to two electrons per QD. Theoretical modeling suggests that the splitting of the 1P e level arises from spin-orbit coupling and reduced QD symmetry. As a result, the fine structure of the intraband transitions is observed in the ensemble studies due to the size uniformity of the as-synthesized QDs and strong spin-orbit coupling inherent to HgTe.
Colloidal quantum wells for optoelectronic devices
Colloidal quantum wells, also called nanoplatelets, are nanoscopic materials displaying quantum confinement in two dimensions. Unlike colloidal quantum dots, colloidal quantum well ensembles have no inhomogeneous broadening due to an atomically-precise definition of the short axis, a fact which results in much narrower ensemble absorption and emission. Thus, colloidal quantum wells can translate many advantages of colloidal nanocrsytals or other solution-processable materials, such as scalable synthesis and substrate-agnostic deposition (particularly compared to epitaxial quantum wells), without sacrificing material uniformity. Furthermore, due to very narrow photoluminescnece peaks, these materials have found a home in applications involving light emission, such as downconversion enhancement films, light-emitting diodes, and lasers, in which they represent some of the best performers among solution-cast materials. As argued in this review, the full spectrum of epitaxial quantum well devices offers a roadmap to other potential applications, such as detection, electronics, electro-optics, non-linear optics, or intersubband devices, in which only nascent efforts have been made.