Engineering PapersSearch

SEARCH · Engineering Papers

Results for “charge patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pattern classification using charge transfer devices

The feasibility of using charge transfer devices in the classification of multispectral imagery was investigated by evaluating particular devices to determine their suitability in matrix multiplication subsystem of a pattern classifier and by designing a protype of such a system. Particular attention was given to analog-analog correlator devices which consist of two tapped delay lines, chip multipliers, and a summed output. The design for the classifier and a printed circuit layout for the analog boards were completed and the boards were fabricated. A test j:g for the board was built and checkout was begun.

Source record

Electrostatically driven pattern formation in mixed charged–neutral multicomponent elastic membranes

Multicomponent crystalline and amorphous elastic shells exhibit heterogeneous surface patterns that provide distinctive functionalities in cellular environments. Such patterning typically arises from the competition between short-range attractive and long-range repulsive interactions in membranes. Here, we demonstrate that the intrinsic competition between electrostatic repulsion and elastic deformation is sufficient to drive spontaneous surface patterning in elastic shells, requiring no additional attractive interactions. Using numerical simulations, we demonstrate pattern formation in mechanically homogeneous membranes with heterogeneous surface charge composition across different topologies, including spheres, discs, and flat periodic membranes. We also examine patterns in crystalline and amorphous shells of coassembled charged and neutral components with different bending rigidities. At low charge fraction, discrete charged surface domains form. At intermediate charge fraction, the competition between electrostatics and elasticity leads to elongated domains (rods) of the charged component, which results in lamellar patterns at nearly equal fraction of the charged and neutral components. At high charge fraction, nanodomains of the neutral component form. Amorphous shells exhibit similar progressions but with disordered structures rather than ordered lamellar patterns. These pattern morphologies are observed in both the closed shells and flat membranes. As salt concentration increases, all patterns coarsen due to the screening of electrostatic interactions.

charge heterogeneity

Electrifying education: Exploring the electrification potential of U.S. School bus fleets

We analyze the operations of 270 diesel school buses across the United States to assess their electrification potential and evaluate the impact of various charging strategies on electricity demand. We find that school buses typically follow a two-route schedule on weekdays, featuring extended dwell times between morning and evening trips. Weekday trip distances average 25 miles, while weekend trips average 42 miles. Charging simulations indicate over 90% of the U.S. school bus fleet could be electrified using current technologies (300-mile range at 1.21 kWh/mile with 19.2-kW depot charging) without modifying existing operating patterns. Depot charging is a key enabler of school bus electrification, however, the strategic placement of charging stations at other locations (e.g., schools) can further increase electrification potential. Additionally, we find electric school bus charging to be highly flexible, with charge management capable of reducing peak charging loads at depots by up to 77%.

24 POWER TRANSMISSION AND DISTRIBUTION

Programmable charge-coupled device /CCD/ correlator for pattern classification

The potential use of charge coupled device (CCD) programmable digital/analog correlators for multispectral data classification is discussed. CCD digital/analog correlator technology and the experimental evaluation of a 32-stage 4-bit test device are presented. The design of an IC for use in a multispectral classification system for 16 sensors and 8 bit accuracy is reviewed.

Mayer, D. J.

Meeting the Grand Challenge of Protecting Astronauts Health: Electrostatic Active Space Radiation Shielding for Deep Space Missions

This report describes the research completed during 2011 for the NASA Innovative Advanced Concepts (NIAC) project. The research is motivated by the desire to safely send humans in deep space missions and to keep radiation exposures within permitted limits. To this end current material shielding, developed for low earth orbit missions, is not a viable option due to payload and cost penalties. The active radiation shielding is the path forward for such missions. To achieve active space radiation shielding innovative large lightweight gossamer space structures are used. The goal is to deflect enough positive ions without attracting negatively charged plasma and to investigate if a charged Gossamer structure can perform charge deflections without significant structural instabilities occurring. In this study different innovative configurations are explored to design an optimum active shielding. In addition, to establish technological feasibility experiments are performed with up to 10kV of membrane charging, and an electron flux source with up to 5keV of energy and 5mA of current. While these charge flux energy levels are much less than those encountered in space, the fundamental coupled interaction of charged Gossamer structures with the ambient charge flux can be experimentally investigated. Of interest are, will the EIMS remain inflated during the charge deflections, and are there visible charge flux interactions. Aluminum coated Mylar membrane prototype structures are created to test their inflation capability using electrostatic charging. To simulate the charge flux, a 5keV electron emitter is utilized. The remaining charge flux at the end of the test chamber is measured with a Faraday cup mounted on a movable boom. A range of experiments with this electron emitter and detector were performed within a 30x60cm vacuum chamber with vacuum environment capability of 10-7 Torr. Experiments are performed with the charge flux aimed at the electrostatically inflated membrane structure (EIMS) in both charged and uncharged configurations. The amount of charge shielding behind and around the EIMS was studied for different combinations of membrane structure voltages and electron energies. Both passive and active shielding were observed, with active shielding capable of deflecting nearly all incoming electrons. The pattern of charge distribution around the structure was studied as well as the stability of the structures in the charge flow. The charge deflection experiments illustrate that the EIMS remain inflated during charge deflection, but will experience small amplitude oscillations. Investigations were performed to determine a potential cause of the vibrations. It is postulated these vibrations are due to the charge flux causing local membrane charge distribution changes. As the membrane structure inflation pressure is changed, the shape responds, and causes the observed sustained vibration. Having identified this phenomenon is important when considering electrostatically inflated membrane structures (EIMS) in a space environment. Additionally, this project included a study of membrane material impacts, specifically the impact of membrane thickness. Extremely thin materials presented new challenges with vacuum preparation techniques and rapid charging. The thinner and lighter membrane materials were successfully inflated using electrostatic forces in a vacuum chamber. However, care must be taken when varying the potentials of such lighter structures as the currents can cause local heating and melting of the very thin membranes. Lastly, a preliminary analysis is performed to study rough order of magnitude power requirements for using EIMS for radiation shielding. The EIMS power requirement becomes increasingly more challenging as the spacecraft voltage is increased. As a result, the emphasis is on the deflection of charges away from the spacecraft rather than totally stopping them. This significantly alleviates the initial power requirements. With modest technological development(s) active shielding is emerging to be a viable option.

Radiation

Designing protein–material interfaces

This article addresses recent advances in using de novo protein design to create coherent interfaces between proteins and inorganic materials, either through protein self-assembly on crystal lattices or through directed nucleation and growth of crystals by protein scaffolds. Inspired by natural protein-crystal interfaces, we focus on a class of designed helical repeat proteins that present a repeating pattern of charged amino acid residues. We describe the use of in situ imaging and spectroscopic methods to investigate both the assembly of these proteins and their ability to direct crystal nucleation and growth. Furthermore, the findings reveal the importance of surface charge, facet-specific binding, solvent organization, and, more generally, the balance of protein-substrate-solvent interactions in determining how organized protein-materials interfaces emerge. Moreover, the results demonstrate the vast potential of protein design in materials science and elucidate the mechanisms by which interactions between biomolecules and inorganic surfaces lead to unique materials and morphologies.

Biomaterials-Proteins

Future Projections of Lifecycle Cost and Greenhouse Gas Emissions of Light-Duty Vehicles

Vehicles with electrified powertrains carry the promise of significant reductions in greenhouse gas (GHG) emissions from a lifecycle analysis (LCA) standpoint compared to conventional internal combustion engine (CICE) vehicles. However, trade-offs exist between different types of electrified powertrains in terms of cost, consumer acceptance, and GHG reduction efficacy for different operating conditions. The open-source tool CarGHG was developed with an aim to enable the exploration of a plethora of parametric study scenarios, including the cost of electrification technologies, different driving patterns and charging habits, and the cost and carbon intensity of electricity and fuel blends. This paper introduces the framework of CarGHG, then showcases total cost of ownership (TCO) and LCA GHG results for select models of light-duty vehicles. Another capability of CarGHG, which is the ability to estimate the performance of “virtual” vehicle models (perceived vehicle design specifications not yet on the market), is utilized to explore future scenarios of electrification and low-carbon fuel blends for Small Sports Utility Vehicles (SUVs), a popular light-duty vehicle segment in North America. With opportunities, but also uncertainties, in future scenarios, it is likely wise to continue pursuing multiple ways towards the reduction of LCA GHG.

Hamza, Karim

Inversion layer solar cell fabrication and evaluation

Inversion layer solar cells have been fabricated by etching through the diffused layer on p-type silicon wafers in a comb-like contact pattern. The charge separation comes from an induced p-n junction at the surface. This inverted surface is caused by a layer of transparent material applied to the surface that either contains free positive ions or that creates donor states at the interface. Cells have increased from 3 ma Isc to 100 ma by application of sodium silicate. The action is unstable, however, and decays with time.

Call, R. L.

Inversion layer solar cell fabrication and evaluation

Inversion layer solar cells were fabricated by etching through the diffused layer on p-type silicon wafers in a comb-like contact pattern. The charge separation comes from an induced p-n junction at the surface. The inverted surface is caused by a layer of transparent material applied to the surface that either contains free positive ions or that creates donor states at the interface. Cells are increased from 3 ma I sub sc to 100 ma by application of sodium silicate. The action is unstable, however, and decays. Non-mesa contaminated oxide cells were fabricated with short circuit currents of over 100 ma measured in the sun. Cells of this type have demonstrated stability.

Call, R. L.

A Model Study of the Impact of Magnetic Field Reversal on Atmospheric Composition during Solar Proton Events

During a polarity transition of the Earth's magnetic field, the structure and strength of the field change significantly from their present values. This will alter the global pattern of charged particle precipitation into the atmosphere. Thus, particle precipitation is possible into regions that are at the moment effectively shielded by the Earth's magnetic field. A two-dimensional global fbHy coupled chemistry, radiation, and transport model of the atmosphere has been used to investigate how the increased particle precipitation affects the chemical composition of the middle and lower atmosphere. Ozone losses resulting from large energetic particle events are found to increase significantly, with resultant losses similar to those observed m the Antarctic ozone hole of the 1990s. This results in significant increases in surface UV-B radiation as well as changes in stratospheric temperature and circulation over a period of several months after large particle events.

Sinnhuber, Miaiam

Thunderstorm currents and lightning charges at the NASA Kennedy Space Center

The NASA Kennedy Space Center, (KSC) and the U.S. Air Force are currently operating an extensive network of ground-based electric-field mills in order to detect atmospheric electrical hazards to ground operations, launches, and landings of spacecraft. Over the past 10 years, the University of Arizona has utilized data provided by this network, and other instrumentation, to investigate the electrical structure of thunderstorms and lightning in Florida. Recent analyses have included estimates of the Maxwell current density that thunderstorms produce at the ground and computations of the locations and magnitudes of lightning-caused changes in the cloud charge distribution. This work is reviewed, and an example of how thunderstorm current patterns and lightning charges develop in both space and time is presented.

Krider, E. P.

Characterizing SRAM Single Event Upset in Terms of Single and Double Node Charge Collection

A well-collapse source-injection mode for SRAM SEU is demonstrated through TCAD modeling. The recovery of the SRAM s state is shown to be based upon the resistive path from the p+-sources in the SRAM to the well. Multiple cell upset patterns for direct charge collection and the well-collapse source-injection mechanisms are then predicted and compared to recent SRAM test data.

Black, J. D.

EV Watts Public Database

With the rapid increase in vehicle electrification, there is a need for up-to-date, publicly available national data to understand end user charging and driving patterns, as well as vehicle and infrastructure performance, to inform research planning. Energetics worked with various partners to collect and analyze plug-in electric vehicle (PEV) and electric vehicle supply equipment (EVSE) data from 2019 to 2022. All sensitive attributes have been removed from this publicly available dataset. Researchers from one of the partner national labs under non-disclosure agreement (NDA) can request access to additional attributes by reaching out to evwattsdata@energetics.com.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI

What Shapes Transportation Charging Infrastructure Availability? Evidence from Tennessee

This study examines how community, travel, and freight characteristics relate to public charging infrastructure availability across Tennessee ZIP codes. We link Alternative Fuels Data Center station locations with traffic, socioeconomic, demographic, commuting, and freight employment data to build a ZIP code-level dataset. Ordinary least squares regression captures variation in chargers per 10,000 residents (R2=0.311). Quantile regressions at the 25th, 50th, and 75th percentiles, with pseudo R2 values up to 0.099, show that the determinants of infrastructure availability differ across low-, medium-, and high-availability areas. Percent female, percent car commuters, average household size, and median age are negatively associated with charging availability across much of the distribution. Truck traffic is positively associated only in lower-availability ZIP codes, while vehicle miles traveled shifts from a negative association at the lower end of the distribution to a positive association at the upper end. The results provide insight into how public charging deployment aligns with community characteristics, mobility demand, and freight activity across Tennessee. Future work can distinguish charger types and power levels, incorporate land-use and temporal rollout patterns, and examine how charging infrastructure needs differ across urban and rural contexts.

Calderón, Oriana [University of Tennessee, Knoxvil

Further observations on resonance cones in non-Maxwellian plasmas

Results on the angular distribution of the electrostatic potential of a pulsating point charge in a warm magnetized plasma permeated by an electron beam are presented. The theoretical formulation for a finite magnetic field is given, and the solution of the resonance cone dispersion relation is presented. Numerical results on the angular distribution of the potential are shown, and the propagation of waves outside the resonance cones is described. It is demonstrated that with the inclusions of a finite magnetic field, the field patterns of a point charge are qualitatively similar to those obtained for a uniaxial plasma. The Cerenkov radiation occurs at angles much smaller than the cold-cone angle, even with the finite magnetic field. When the beam velocity is well above the thermal velocity of the background electrons, a characteristic wave propagation occurs between the cold-cone angles.

Thiemann, H.

Investigation of design principles for metal-binding and conductive protein assemblies

Throughout the lifetime of this initiative, including renewals, we focused on understanding the fundamental principles of protein-protein interface design that enable predictable and modular spatial and kinetic control of multi-component protein self-assembly in 1D, 2D, and 3D, including the interface with inorganic materials, small molecules, and metal ions. We designed individual protein components that bind specific metal ions, including REEs and transport ions across lipid membranes. We created helical 1D filaments of repeating units with programmed periodicity, pitch, and multi-component environmentally responsive self-assembling protein fibers. We showed that these filaments reversibly assemble and disassemble under specific pH conditions and created end-specific caps that independently tune the balance of attachment and detachment rates at each terminus of the filament. Using similar filaments, we succeeded in binding arrays of heme and chlorophyll molecules and assembling patterned helical coatings around carbon nanotubes in efforts to create de novo conductive nanowires. By arraying REE binding sites in a large circular tandem array with a repeat protein-based cyclic oligomer, we created a molecular scaffold for superradiance and paramagnetic quantum sensing. We created a range of one-component and two-component self-assembling 2D arrays and showed that when designed to engage cell receptors, these arrays can control cell behavior from outside the cell signal to inside the cell. We designed helical repeat proteins with variable lengths displaying charged residues in a pattern matched to the cation lattice of mica. achieved a range of ordered states with an epitaxial match to the underlying crystal lattice. We further applied the learned principles of protein-induced biomineralization to design proteins with an interface lattice matching CaCO 3 and guide the formation of specific crystal forms of CaCO 3 from solution, a significant advance toward the global need to manage carbon. In all cases of mineral lattice matching and biomineralization, we followed assembly using molecularly resolved in situ AFM imaging and extracted information about assembly pathways and energetics, applying deep learning to quantify the dynamics of protein self-organization. We developed techniques for using dynamic metal-dependent interfaces on protein nanopores for discriminatively sensing dilute REEs in solution and demonstrated the use of strong metal-binding interfaces to drive nanocage disassembly for conditional nanocompartmentalization applications. This grant supported 11 people, including Asim Bera, Evans Brackenbrough, Andrew Borst, Nikita Hanikel, Timothy Huddy, Emily Joyce, Alex Young-Seug Kang, Ryan Kibler, Joshua Morris Lubner, Harley Pyles, and Shuai Zhang. The research effort culminated in the production of published papers and theses. Electronic Thesis/Dissertation are distributed by ProQuest/UMI Dissertation Publishing and made available on an open access basis through UW Libraries ResearchWorks Service.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Charge density waves and pinning by lattice anisotropy in 214 cuprates

The detection of static charge density waves (CDWs) in La 2-x ⁢Sr x ⁢CuO 4 (LSCO) with x ~ 0.12 at relatively high temperatures has raised the question of what lattice feature pins the CDWs. Some recent structural studies have concluded that some form of monoclinic distortion, indicated by the appearance of certain weak Bragg peaks (type M peaks) at otherwise forbidden positions, are responsible for CDW pinning. Here, as a test of this idea, we present neutron diffraction results for a single crystal of La 2-x ⁢Ba x CuO 4 (LBCO) with x = 1/8, which is known to undergo two structural transitions on cooling, from high-temperature tetragonal (HTT) to low-temperature orthorhombic (LTO) near 240 K, involving a collective tilt pattern of the corner-sharing CuO 6 octahedra, and from LTO to low-temperature tetragonal (LTT) near 56 K, involving a new tilt pattern and the appearance of intensity at peaks of type T. We observe both type M and type T peaks in the LTT phase, while the type M peaks (but not type T) are still present in the LTO phase. Given that CDW order is observed only in the LTT phase of LBCO, it is apparent that the in-plane Cu-O bond anisotropy associated with the octahedral tilt pattern is responsible for charge pinning. We point out that evidence for a similar, but weaker, bond anisotropy has been observed previously in LSCO and should be responsible for CDW pinning there. In the case of LBCO, the monoclinic distortion may help to explain previously reported magneto-optical evidence for gyrotropic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND