Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbon materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Cellulose regulated lignin/cellulose-based carbon materials with hierarchical porous structure for energy storage

Lignin has gained extensive attention as an ideal carbon precursor due to its abundance and high carbon content. However, the agglomeration of lignin and additional corrosive and unrecyclable reagents in direct pyrolysis still limit the development of lignin-based porous carbons. Herein, a facile and eco-friendly strategy was proposed to fabricate hierarchical porous lignin/cellulose-based carbon materials (LCs). In the process, cellulose nanofibrils acted as the skeleton of the bio-aerogels, which supported lignin and benefit the preparation of the LCs. Moreover, the specific surface area and the graphitization degree of LCs can be regulated by varying the cellulose content. Without activation, the bio-based carbon material (LC30) had a high specific surface area of 1770 m 2 g –1 , which displayed high specific capacitance of 216.2 F g –1 at the current density of 0.5 A g –1 . The supercapacitor based on LC30 also showed outstanding energy density of 12.3 Wh kg –1 at the power density of 50 W kg –1 . The sustainable raw material, simple and harmless preparation process, and remarkable electrochemical performance enable LC30, a promising supercapacitor electrode for energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

ZIF-8 derived carbon materials with multifunctional selective adsorption abilities

We report a family of carbon materials (denoted SFZ8C) prepared from templated carbonization of zeolitic imidazolate framework-8 (ZIF-8) in NaCl-ZnCl 2 eutectic salt. The hard-templating effect of the salt is utilized to sustain the framework and maximize the porosity during carbonization. In addition to rich surface nitrogen and oxygen species, SFZ8Cs have large specific surface area. These combined features give rise to excellent adsorption properties for light hydrocarbon gases. SFZ8Cs have both C 2 H 2 /CO 2 selective and C 3 /C 2 selective adsorption, as well as the ability to selectively remove impurities from methane. Particularly noteworthy is the excellent C 3 /C 2 selective adsorption performance by SFZ8C-900. Its propane/ethane selectivity (7.68) is on par with the best value (7.72) reported so far, yet SFZ8C-900 excels in propane uptake capacity. Here, the multifunctional properties together with the ease for the mass production make SFZ8Cs promising for a number of important applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Solvent-free production of carbon materials with developed pore structure from biomass for high-performance supercapacitors

The study aimed at preparing porous carbon materials, with superhydrophilic characteristics and developed micro/mesoporous structure (CSB-800), from corn stover by a solvent-free method including pre-carbonization, ball milling, and activation. The effect of pre-carbonization, ball milling on the detailed structural composition and properties especially the hydrophilicity and porous structures were studied, and the potential application of CSB-800 as electrode in supercapacitors was also investigated. The results revealed that pre-carbonization increased the accessibility of raw materials as well as the efficiency of the ball milling with KOH, leading to small carbon particles with good dispersion behavior. Ball milling promoted the porosity, surface energy, hydrophilicity, crystallinity, and graphitization of the carbon materials. CSB-800 exhibited a high specific surface area of 2440.6 m 2 /g with developed micro and porous structures. The heteroatom nitrogen formed nitrogen-containing groups of N Q and N X, which provided faradaic pseudocapacitance when CSB-800 was used as an electrode material, and this material presented a specific capacitance of 398 F/g at 0.5 A/g in 1 M H 2 SO 4 electrolyte in a three-electrode system, while the value was 243 F/g in a two-electrode system, and the energy density reached 5.01 Wh/kg at a power density of 100 W/kg.

09 BIOMASS FUELS↗
DOE OSTI2024

Upcycling Polyethylene Waste to Advanced Carbon Materials for Energy Storage Applications

Polyethylene is notoriously difficult to upcycle because it decomposes into light gases at approximately 350-400 °C which prevents processing it at higher temperatures to convert it into high-value carbon materials, such as graphene or graphite. We address this challenge by using an air-based, thermo-oxidation process, which heats polyethylene (PE) just below the decomposition point to initiate oxidation and cross-linking of PE alkyl chains. These molecular transformations allow PE to be further graphenized or graphitized at higher temperatures without decomposing. The PE-derived graphene has a specific surface area up to 1,800 m 2/g and Raman ID/IG ratio of 0.85, which enables it to be used as an electrode material for a symmetric supercapacitor with the 1 M H2SO4 electrolyte. The PE-derived graphene material has a comparable electrochemical capacitive performance, such as power density, specific capacitance, and long cycle stability, to the commercial state of art porous carbon electrode. The stabilized PE could also be converted into highly crystalline flake graphite via low-temperature catalytic graphitization. The PE-derived graphite is used for the lithium-ion battery anode, which showed comparable electrochemical battery performance, such as reversible rate performance and long-term cyclic stability, to the current use battery-grade graphite, thus providing a scalable method to upcycle PE plastic waste into high-value carbon material.

Gao, Yuan↗
DOE OSTI2024

Low-temperature dechlorination of polyvinyl chloride (PVC) for production of H 2 and carbon materials using liquid metal catalysts

Polyvinyl chloride (PVC) is ubiquitous in everyday life; however, it is not recycled because it degrades uncontrollably into toxic products above 250°C. Therefore, it is of interest to controllably dechlorinate PVC at mild temperatures to generate narrowly distributed carbon materials. We present a catalytic route to dechlorinate PVC (~90% reduction of Cl content) at mild temperature (200°C) to produce gas H 2 (with negligible coproduction of corrosive gas HCl) and carbon materials using Ga as a liquid metal (LM) catalyst. A LM was used to promote intimate contact between PVC and the catalytic sites. During dechlorination of PVC, Cl is sequestrated in the carbonaceous solid product. Later, chlorine is easily removed with an acetone wash at room temperature. The Ga LM catalyst is reusable, outperforms a traditional supported metal catalyst, and successfully converts (untreated) discarded PVC pipe.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Carbon Materials Embedded with Metal Nanoparticles as Anode in Lithium-Ion Batteries

Carbon materials containing metal nanoparticles that can form an alloy with lithium were tested for their capacity and cycle life to store and release lithium electrochemically. Metal nanoparticles may provide the additional lithium storage capacity as well as additional channels to conduct lithium in carbon. The cycle life of this carbon-metal composite can be long because the solid-electrolyte interface (SEI) on the carbon surface may protect both lithium and the metal particles in the carbon interior. In addition, the voids in the carbon interior may accommodate the nanoparticle's volume change, and such volume change may not cause much internal stress due to small sizes of the nanoparticles. This concept of improving carbon's performance to store and release lithium was demonstrated using experimental cells of C(Pd)/0.5M Lil-50/50 (vol.%) EC and DMC/Li, where C(Pd) was graphitized carbon fibers containing palladium nanoparticles, EC was ethylene carbonate, and DMC was dimethyl carbonate. However, such improvement was not observed if the Pd nanoparticles are replaced by aluminum, possibly because the aluminum nanoparticles were oxidized in air during storage, resulting in an inert oxide of aluminum. Further studies are needed to use this concept for practical applications.

Hung, Ching-cheh↗
DOE OSTI2026

Neutron imaging of hydrogenous gases in porous-carbon materials around phase transitions

Focus herein is on hydrogenous gases interacting with porous-carbon materials on activated biochar at pressures ranging from 0 to 100 bar and temperatures from room (ambient) to cryogenic. Neutron radiography was conducted using a custom-made cell system to simultaneously image pure gas and gas interacting with the porous carbon. From neutron attenuation, the cross sections of methane and ethane and number concentrations were determined for different pressures and temperatures and compared with corresponding reference data. Sorption properties of the porous materials were investigated in situ with methane, ethane, and propane.

Ossler, Frederik [Lund University, Sweden]↗
DOE OSTI2020

Heavy boron doping in superconducting carbon materials

Here we examine physical properties of heavily boron-doped sp 3 -hybridized carbon allotropes: cubic diamond, hexagonal diamond, and body centered tetragonal C 4 . The structural similarity between cubic diamond and hexagonal diamond leads to similar responses to substitutional boron doping. On the other hand, body centered tetragonal C 4 exhibits distinct structural and electronic properties because of its characteristic structure. Our study also shows that the superconducting transition temperatures up to 60 K are possible in heavily doped carbon materials despite their various atomistic structures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantification of the carbon bonding state in amorphous carbon materials: A comparison between EELS and NEXAFS measurements

In this report the quantitative determination of the carbon hybridization is critical for establishing processing-structure-properties relationships for carbon-based materials, including amorphous carbon coatings. While several techniques have been employed to characterize the amount of sp 2 and sp 3 carbon in these materials, direct comparisons between analytical results are limited. Here, we compare near edge X-ray absorption fine structure (NEXAFS) spectra of a silicon- and oxygen-containing hydrogenated amorphous carbon (a-C:H:Si:O) coating acquired in synchrotron-based scanning transmission X-ray microscopy (STXM) mode with electron energy loss spectra (EELS) obtained from the same a-C:H:Si:O lamella. While the fractions of sp 2 carbon computed from STXM and EELS spectra are in close agreement, the comparison of NEXAFS spectra acquired in STXM mode with NEXAFS spectra collected in partial electron yield mode on a flat a-C:H:Si:O surface indicated that the destructive preparation of thin lamellae for STXM analyses induces variations in the structure of a-C:H:Si:O, namely the breakage of carbon-silicon and carbon-hydrogen bonds, a change in ordering of sp 2 -bonded carbon, and an increase in the sp 2 carbon fraction. These findings can help scientists in the careful interpretation of spectroscopic results obtained from the analysis of samples made of metastable materials after the destructive preparation of specimens for analytical purposes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced CO 2 Adsorption Capacity in Highly Porous Carbon Materials Derived from Melamine-Formaldehyde Resin

Here, the present study explores the synthesis of N-doped carbon materials with large surface porosity using commercial melamine-formaldehyde resin as the precursor and KOH as the activator. The resin was carbonized first and then activated by KOH with varying KOH amount and activation temperature. Notably, the as-obtained sorbents display advanced porosity with the highest surface area and pore volume of 1591 m 2 /g and 0.74 cm 3 /g, respectively, along with high N content ranging from 6.43 to 18.34 wt %. Remarkably, maximum CO 2 capture amounts of 5.42 and 3.52 mmol/g were accomplished at 0 and 25 degrees C, 1 bar for as-synthesized carbons. Systematic studies point out that narrow microporosity is the major factor determining the CO 2 uptake of these carbons under ambient pressure. Furthermore, these sorbents display notable CO 2 selectivity, rapid adsorption kinetics, moderate heat of adsorption, substantial dynamic CO 2 capture capacity, and stable recyclability. These results underscore the potential of melamine-formaldehyde resin-derived N-doped porous carbon as an efficient and versatile adsorbent for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

Yu, Yingchao↗
DOE OSTI2024

Lignite-Derived Carbon Materials for Lithium-Ion Battery Anodes

This project involved collaboration between the University of North Dakota (UND) College of Engineering & Mines, Clean Republic, LLC (CR), and the North American Coal Corporation (NACoal) to develop advanced LIBs anodes from lignite-derived carbon materials. The overall goal of the project was to develop advanced anode materials for LIBs from lignite-derived carbon feedstocks.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1977

Prediction of in-depth oxidation distribution of reinforced carbon-carbon materials for Space Shuttle leading edges

A method was developed for predicting oxidation distribution through the thickness of reinforced carbon-carbon material in an earth atmospheric entry environment. A mathematical model was developed which describes oxygen diffusion and reaction rates within material pores. Pertinent rate constants were derived, and material mass loss was computed for a range of temperatures and pressures. Results indicate that both temperature and pressure have an important effect on mass loss distribution. Analytical results were quite consistent with results of ground oxidation tests.

Medford, J. E.↗
DOE OSTI2022

Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 1: Controlling SGR to modify intermediate coal tar species to improve pitch anisotropy

To meet the increasing demand for graphitizable carbon products, such as needle coke and carbon fiber, more carbon feedstocks capable of forming anisotropy should be utilized. Non-coking coals are widely available but are not typically suitable for producing anisotropic carbons due to lacking proper coal chemistry. This work used secondary gas-phase reactions (SGR) during coal pyrolysis to improve the coal tar chemistry of a non-coking coal for anisotropic carbon production. SGR pyrolysis temperatures and residence times were varied (T = 800–900°C and τ = 0–2.5 s), and analysis of the intermediate coal tar products showed that as these SGR pyrolysis conditions increased, the oxygen and aliphatic concentrations decreased, whereas aromatic contents and molecular weights increased. Without any SGR, microscopy of the thermally-treated coal tar pitch product revealed that the coal tar pitch was isotropic; however, upon using increased SGR pyrolysis conditions, the resulting coal tar pitch samples substantially increased in the percentage and quality of anisotropy formation. Further, the products' analyses show clear trends of modified chemical properties in the intermediate coal tar and improved anisotropy results. Thus, the results presented in this work show that by controlling the SGR during pyrolysis of a non-coking coal, this approach can modify the coal tar chemistry towards a precursor more suitable for quality anisotropic carbon material production.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1975

Prediction of oxidation performance of reinforced carbon-carbon material for Space Shuttle leading edges

A method was developed for predicting oxidation performance, in an earth atmospheric entry environment, of reinforced carbon-carbon material, coated for oxidation resistance. A model was developed which describes oxidation control mechanisms, and the equations defining these mechanisms were derived. These relations were used to correlate oxidation test data, and to infer pertinent rate constants. Predictions were made of material oxidation performance in a representative entry environment, and the predictions were compared with ground test data. Results indicate that the method can be successfully used for predicting material oxidation performance.

Medford, J. E.↗
NASA NTRS2002

Radiation Exposure Effects and Shielding Analysis of Carbon Nanotube Materials

Carbon nanotube materials promise to be the basis for a variety of emerging technologies with aerospace applications. Potential applications to human space flight include spacecraft shielding, hydrogen storage, structures and fixtures and nano-electronics. Appropriate risk analysis on the properties of nanotube materials is essential for future mission safety. Along with other environmental hazards, materials used in space flight encounter a hostile radiation environment for all mission profiles, from low earth orbit to interplanetary space.

Wilkins, Richard↗
DOE OSTI2021

A deep learning interatomic potential developed for atomistic simulation of carbon materials

Interatomic potentials based on neural-network machine learning method have attracted considerable attention in recent years owing to their outstanding ability to balance the accuracy and efficiency in atomistic simulations. In this work, a neural-network potential (NNP) for carbon is generated to simulate the structural properties of various carbon structures. The potential is trained using a database consisting of crystalline and liquid structures obtained by the first-principles density functional theory (DFT) calculations. The developed potential accurately predicts the energies and forces in crystalline and liquid carbon structures, the energetic stability of defected graphene, and the structures of amorphous carbon as the function of density. As a result, the excellent accuracy and transferability of the NNP provide a promising tool for accurate atomistic simulations of various carbon materials with faster speed and much lower cost.

36 MATERIALS SCIENCE↗