Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbon clustering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Tunable far-IR laser spectroscopy of jet-cooled carbon clusters - The nu-2 bending vibration of C3

Seven rovibrational transitions of the (01/1/0)-(00/0/0) fundamental bending band of C3 have been measured with high precision with the use of a tunable far-infrared laser spectrometer. The C3 molecules were produced by laser vaporization of a graphite rod and cooled in a supersonic expansion. The astrophysically important nu-2 fundamental frequency is determined to be 63.416529(40)/cm. These measurements provide the basis for studies of C3 in the interstellar medium with far-infrared astronomy.

Schmuttenmaer, C. A.↗
NASA NTRS1991

Infrared laser absorption spectroscopy of the nu4 (sigma u) fundamental and associated nu11(pi u) hot band of C7 - Evidence for alternating rigidity in linear carbon clusters

The first characterization of the bending potential of the C7 cluster is reported via the observation of the v = 1(1) and v = 2 deg levels of the nu11 (pi u) bend as hot bands associated with the nu4 (sigma u) antisymmetric stretch fundamental. The lower state hot band rotational constants are measured to be 1004.4(1.3) and 1123.6(9.0) MHz, constituting a 9.3 and 22 percent increase over the ground state rotational constant, 918.89 (41) MHz. These large increases are strong quartic and sextic centrifugal distortion constants determined for the ground and nu 4 = 1 states are found to be anomalously large and negative, evidencing strong perturbations between stretching and bending modes.

Heath, J. R.↗
NASA NTRS1996

Infrared laser spectroscopy of jet-cooled carbon clusters: the nu 5 band of linear C9

The nu 5 antisymmetric stretching vibration of 1 sigma+g C9 has been observed using direct infrared diode laser absorption spectroscopy of a pulsed supersonic cluster beam. Twenty-eight rovibrational transitions measured in the region of 2079-2081 cm-1 were assigned to this band. A combined least squares fit of these transitions with previously reported nu 6 transitions yielded the following molecular constants for the nu 5 band: nu 0 = 2 079.673 58(17) cm-1, B"= 0.014 321 4(10) cm-1, and B'=0.014 288 9(10) cm-1. The IR intensity of the nu 5 band relative to nu 6 was found to be 0.108 +/- 0.006. Theoretical predictions for the relative intensities vary widely depending upon the level of theory employed, and the experimental value reported here is in reasonable agreement only with the result obtained from the most sophisticated ab initio calculation considered (CCSD).

Non-NASA Center↗
NASA NTRS1986

Characterization of biogenic elements in interplanetary dust particles

Those particles that were designated cometary are aggregates of amorphous materials including carbon, iron-magnesium silicates, sulfides, metal and trace amounts of unusual phases. Most aggregates are carbon-rich with major and minor element abundances similar to a fine grained matrix of carbonaceous chondrites. Several particles were analyzed by a laser microprobe. The negative ionic species identified to date include carbon clusters, protonated carbon clusters, CN-, HCN-, CNO-, PO2-, PO3-, S-, S2- asnd OH-. These species are similar to those observed in cometary spectra and they support the assumption that organic materials are present. The occurance of phosphate ions suggests the presence of apatite or whitlockite. Cometary particle characteristics may indicate that the component grains represent primitive unaltered dust whose overall properties are extremely similar to altered primitive dust in carbonaceous chondrites.

Bunch, T. E.↗
DOE OSTI2025

Microcarbonation of Naphthalene: An Experimental and Computational Study of Photoionization in Naphthalene-Carbon Dioxide Clusters

The photoionization of naphthalene (N)-carbon dioxide (CO 2 ) clusters was studied using tunable vacuum ultraviolet (VUV) radiation from a synchrotron in the photon range of 8.0 to 13.7 eV, in combination with time-of-flight mass spectrometry. Clusters of monomer, dimer, and trimer naphthalene with CO 2 (N­(CO 2 ) 0–6 , N 2 ­(CO 2 ) 0–3 , N3) were observed. The lowest-energy conformers were obtained via a conformer search, followed by geometry optimizations at the ωB97X-V2/aug-cc-pVTZ (monomer) and ωB97X-V2/aug-cc-pVDZ (dimer) levels of theory. Carbon dioxide was found to preferentially cluster on top of the naphthalene molecule (in an out-of-plane configuration). From the mass spectra, photoionization intensity curves (PICs) were constructed, and appearance energies (AEs) were determined. No substantial trend in AE was observed with increasing size of the naphthalene-carbon dioxide clusters; rather, AE oscillations around the value for pure naphthalene were observed. These AE oscillations are also observed in a recently studied naphthalene-water cluster system, though in this system a slight downward trend in AE for pure naphthalene clusters (N1/2/3/4) was observed. The differences between the two systems are attributed to differing interaction strengths. In conclusion, understanding these differences may aid in determining how photoprocessing can proceed differently depending on the dominant matrix component in interstellar ices.

Wannenmacher, Anna [Lawrence Berkeley National Lab↗
NASA NTRS2003

Proposal for Testing and Validation of Vacuum Ultra-Violet Atomic Laser-Induced Fluorescence as a Method to Analyze Carbon Grid Erosion in Ion Thrusters

Previous investigation under award NAG3-25 10 sought to determine the best method of LIF to determine the carbon density in a thruster plume. Initial reports from other groups were ambiguous as to the number of carbon clusters that might be present in the plume of a thruster. Carbon clusters would certainly affect the ability to LIF; if they were the dominant species, then perhaps the LIF method should target clusters. The results of quadrupole mass spectroscopy on sputtered carbon determined that minimal numbers of clusters were sputtered from graphite under impact from keV Krypton. There were some investigations in the keV range by other groups that hinted at clusters, but at the time the proposal was presented to NASA, there was no data from low-energy sputtering available. Thus, the proposal sought to develop a method to characterize the population only of atoms sputtered from a graphite target in a test cell. Most of the ground work had been established by the previous two years of investigation. The proposal covering 2003 sought to develop an anti-Stokes Raman shifting cell to generate VUW light and test this cell on two different laser systems, ArF and YAG- pumped dye. The second goal was to measure the lowest detectable amounts of carbon atoms by 156.1 nm and 165.7 nm LIF. If equipment was functioning properly, it was expected that these goals would be met easily during the timeframe of the proposal, and that is the reason only modest funding was requested. The PI was only funded at half- time by Glenn during the summer months. All other work time was paid for by Whitworth College. The college also funded a student, Charles Shawley, who worked on the project during the spring.

Stevens, Richard↗
DOE OSTI2022

Effect of Carbon Nanofiber Clustering on the Micromechanical Properties of a Cement Paste

The use of carbon nanofibers (CNFs) in cement systems has received significant interest over the last decade due to their nanoscale reinforcing potential. However, despite many reports on the formation of localized CNF clusters, their effect on the cement paste micromechanical properties and relation to the mechanical response at the macroscopic scale are still not fully understood. In this study, grid nanoindentation coupled with scanning electron microscopy and energy dispersive spectroscopy was used to determine the local elastic indentation modulus and hardness of a portland cement paste containing 0.2% CNFs with sub-micro and microscale CNF clusters. The presence of low stiffness and porous assemblage of phases (modulus of 15–25 GPa) was identified in the cement paste with CNFs and was attributed primarily to the interfacial zone surrounding the CNF clusters. The CNFs favored the formation of higher modulus C–S–H phases (>30 GPa) in the bulk paste at the expense of the lower stiffness C–S–H. Nanoindentation results combined with a microscale–macroscale upscaling homogenization method further revealed an elastic modulus of the CNF clusters in the range from 18 to 21 GPa, indicating that the CNF clusters acted as compliant inclusions relative to the cement paste.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Kinetics of Carbon Condensation in Detonation of High Explosives: First-Order Phase Transition Theory Perspective

We report the kinetics of carbon condensation, or carbon clustering, in detonation of carbon-rich high explosives is modeled by solving a system of rate equations for concentrations of carbon particles. Unlike previous efforts, the rate equations account not only for the aggregation of particles but also for their fragmentation in a thermodynamically consistent manner. Numerical simulations are performed, yielding the distribution of particle concentrations as a function of time. In addition to that, analytical expressions are obtained for all the distinct steps and regimes of the condensation kinetics, which facilitates the analysis of the numerical results and allows one to study the sensitivity of the kinetic behavior to the variation of system parameters. The latter is important because the numerical values of many parameters are not reliably known at present. The theory of the kinetics of first-order phase transitions is found adequate to describe the general kinetic trends of carbon condensation, as described by the rate equations. Such physical phenomena and processes as the coagulation, nucleation, growth, and Ostwald ripening are observed, and their dependence on various system parameters is studied and reported. It is believed that the present work will become useful when analyzing the present and future results for the kinetics of carbon condensation, obtained from experiments or atomistic simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comments on the SURFplus reactive burn model

The SURFplus reactive burn model is intended for heterogeneous solid HE that produce an excess amount of carbon. It utilizes a fast hotspot reaction (SURF model) plus a second slow reaction for the energy release from carbon clustering. The fast reaction dominates shock initiation, though the fast rate parameters are slightly affected by the late energy release from the slow reaction. The slow reaction has a significant affect on propagating detonation waves. Propagating detonation waves are characterized by the curvature effect; i.e., detonation speed $D_n$ as function of the local front curvature κ. The $D_n(κ)$ curves have a qualitative different shape. This results from the sensitivity of the slope of the $D_n(κ)$ curve to the reaction-zone width up to the sonic point, and the sonic point moving as κ increases from the end of the slow reaction to the neighborhood of the end of the fast reaction. For PBX 9502, the steep slope for small curvature is determined by the slow reaction, while the lower slope for larger curvature is determined by the fast reaction rate in the high detonation pressure regime. The remainder of this paper is organized as follows. In section 2 we review the assumptions of the Shaw and Johnson carbon cluster model used by the SURFplus model for the slow reaction. Section 3 describes in detail the mixture model for a partly burned HE. The form of the slow rate used by the SURFplus model is described in section 4. We conclude with a brief discussion of applying a burn model with 2 rates to either a metalized or a composite PBX.

42 ENGINEERING↗
NASA NTRS1990

Electronic and molecular structure of carbon grains

Clusters of carbon atoms have been studied with large-scale ab initio calculations. Planar, single-sheet graphite fragments with 6 to 54 atoms were investigated, as well as the spherical C(sub 60) Buckminsterfullerene molecule. Polycyclic aromatic hydrocarbons (PAHs) have also been considered. Thermodynamic differences between diamond- and graphite-like grains have been studied in particular. Saturation of the peripheral bonds with hydrogen is found to provide a smooth and uniform convergence of the properties with increasing cluster size. For the graphite-like clusters the convergence to bulk values is much slower than for the three-dimensional complexes.

Almloef, Jan↗
NASA NTRS2004

Chemical models for simulating single-walled nanotube production in arc vaporization and laser ablation processes

Chemical kinetic models for the nucleation and growth of clusters and single-walled carbon nanotube (SWNT) growth are developed for numerical simulations of the production of SWNTs. Two models that involve evaporation and condensation of carbon and metal catalysts, a full model involving all carbon clusters up to C80, and a reduced model are discussed. The full model is based on a fullerene model, but nickel and carbon/nickel cluster reactions are added to form SWNTs from soot and fullerenes. The full model has a large number of species--so large that to incorporate them into a flow field computation for simulating laser ablation and arc processes requires that they be simplified. The model is reduced by defining large clusters that represent many various sized clusters. Comparisons are given between these models for cases that may be applicable to arc and laser ablation production. Solutions to the system of chemical rate equations of these models for a ramped temperature profile show that production of various species, including SWNTs, agree to within about 50% for a fast ramp, and within 10% for a slower temperature decay time.

Nanotubes, Carbon/chemistry↗
NASA NTRS2009

Control of the Diameter and Chiral Angle Distributions during Production of Single-Wall Carbon Nanotubes

Many applications of single wall carbon nanotubes (SWCNT), especially in microelectronics, will benefit from use of certain (n,m) nanotube types (metallic, small gap semiconductor, etc.) Especially fascinating is the possibility of quantum conductors that require metallic armchair nanotubes. However, as produced SWCNT samples are polydisperse, with many (n,m) types present and typical approx.1:2 metal/semiconductor ratio. Nanotube nucleation models predict that armchair nuclei are energetically preferential due to formation of partial triple bonds along the armchair edge. However, nuclei can not reach any meaningful thermal equilibrium in a rapidly expanding and cooling plume of carbon clusters, leading to polydispersity. In the present work, SWCNTs were produced by a pulsed laser vaporization (PLV) technique. The carbon vapor plume cooling rate was either increased by change in the oven temperature (expansion into colder gas), or decreased via "warm-up" with a laser pulse at the moment of nucleation. The effect of oven temperature and "warm-up" on nanotube type population was studied via photoluminescence, UV-Vis-NIR absorption and Raman spectroscopy. It was found that reduced temperatures leads to smaller average diameters, progressively narrower diameter distributions, and some preference toward armchair structures. "Warm-up" shifts nanotube population towards arm-chair structures as well, but the effect is small. Possible improvement of the "warm-up" approach to produce armchair SWCNTs will be discussed. These results demonstrate that PLV production technique can provide at least partial control over the nanotube (n,m) population. In addition, these results have implications for the understanding the nanotube nucleation mechanism in the laser oven.

Nikolaev, Pavel↗
NASA NTRS2006

Is Q for Quantum? From Quantum Mechanics to Formation of the Solar System

The realization in 1985 that fullerenes exist in nature [1] as a third form of carbon-carbon clustering, continues to inspire new areas of research. In particular, the study of closed-cage endohedral fullerenes [2-6] is of scientific interest because of its potential application in a number of promising fields from medical imaging to astrophysics. One of these is to provide a possible chronometer for studying the age and origin of certain astromaterials in the solar system. Fullerenes are closed carbon cages that are fundamentally related to a long-standing debate over the "Q-Phase" origin of planetary noble gases in carbonaceous chondrites [7]. Although Q-phase has been identified as the carrier of planetary noble gases [8- 10], its physical nature has not been explained. Our limited understanding of it is based primarily on the laboratory chemical processing which it survives as well as the fact that it must have been widely distributed in the solar nebula [11]. Yet as important as it might be while preoccupying some 30 years of research, the question of what actually is Q-phase remains unresolved.

Wilson, T. L.↗
NASA NTRS2005

Probabilisitc Geobiological Classification Using Elemental Abundance Distributions and Lossless Image Compression in Recent and Modern Organisms

Last year we presented techniques for the detection of fossils during robotic missions to Mars using both structural and chemical signatures[Storrie-Lombardi and Hoover, 2004]. Analyses included lossless compression of photographic images to estimate the relative complexity of a putative fossil compared to the rock matrix [Corsetti and Storrie-Lombardi, 2003] and elemental abundance distributions to provide mineralogical classification of the rock matrix [Storrie-Lombardi and Fisk, 2004]. We presented a classification strategy employing two exploratory classification algorithms (Principal Component Analysis and Hierarchical Cluster Analysis) and non-linear stochastic neural network to produce a Bayesian estimate of classification accuracy. We now present an extension of our previous experiments exploring putative fossil forms morphologically resembling cyanobacteria discovered in the Orgueil meteorite. Elemental abundances (C6, N7, O8, Na11, Mg12, Ai13, Si14, P15, S16, Cl17, K19, Ca20, Fe26) obtained for both extant cyanobacteria and fossil trilobites produce signatures readily distinguishing them from meteorite targets. When compared to elemental abundance signatures for extant cyanobacteria Orgueil structures exhibit decreased abundances for C6, N7, Na11, All3, P15, Cl17, K19, Ca20 and increases in Mg12, S16, Fe26. Diatoms and silicified portions of cyanobacterial sheaths exhibiting high levels of silicon and correspondingly low levels of carbon cluster more closely with terrestrial fossils than with extant cyanobacteria. Compression indices verify that variations in random and redundant textural patterns between perceived forms and the background matrix contribute significantly to morphological visual identification. The results provide a quantitative probabilistic methodology for discriminating putatitive fossils from the surrounding rock matrix and &om extant organisms using both structural and chemical information. The techniques described appear applicable to the geobiological analysis of meteoritic samples or in situ exploration of the Mars regolith. Keywords: cyanobacteria, microfossils, Mars, elemental abundances, complexity analysis, multifactor analysis, principal component analysis, hierarchical cluster analysis, artificial neural networks, paleo-biosignatures

Storrie-Lombardi, Michael C.↗
DOE OSTI2021

SiOC coatings on yttria stabilized zirconia microspheres using a fluidized bed coating process

In this study, defect-free SiOC coatings were prepared on yttria stabilized zirconia (YSZ) microspheres by a fluidized bed coating process. Effects of the rheological properties of the coating solution on the coating process were elucidated. An impact regime diagram was constructed, which demonstrated that the coating mechanisms were collision/impact. During the fluidized bed coating, longer spouted time resulted in wider dispersion, longer residence time, and more circulatory motion of particles; the fluid distributed more uniformly throughout the column, as demonstrated in our Multiphase Flow with Interface eXchange (MFiX) simulations. Two-step pyrolysis in Ar achieved complete coating layers, which were comprised of SiOC, SiO 2 , SiC, and graphite. The two stage mass loss during the pyrolysis corresponded to simultaneous reactions due to depolymerization and hydrocarbon loss from 400 to 600°C. Carbon cluster size in the pyrolyzed samples was calculated to be 25 ± 2 Å. In conclusion, this work provides a new method for producing SiOC coatings on micron spheres, with nuclear TRISO fuel particles as the application.

42 ENGINEERING↗
DOE OSTI2023

Multiscale Reactive Model for 1,3,5-Triamino-2,4,6-trinitrobenzene Inferred by Reactive MD Simulations and Unsupervised Learning

When high-energy-density materials are subjected to thermal or mechanical insults at extreme conditions (shock loading), a coupled response between the thermo-mechanical and chemical behaviors is systematically induced. Herein we develop a reaction model for the fast chemistry of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) at the mesoscopic scale, where the chemical behavior is determined by underlying microscopic reactive simulations. The slow carbon cluster formation is not discussed in the present work. All-atom reactive molecular dynamics (MD) simulations are performed with the ReaxFF potential, and a reduced-order chemical kinetics model for TATB is fitted to isothermal and adiabatic simulations of single crystal chemical decomposition. Unsupervised machine learning techniques based on non-negative matrix factorization are applied to MD trajectories to model the decomposition kinetics of TATB in terms of a four-component model. The associated heats of reaction are fit to the temperature evolution from adiabatic decomposition trajectories. Using a chemical species analysis, we show that non-negative matrix factorization captures the main chemical decomposition steps of TATB and provides an accurate estimation of their evolution with temperature. The final analytical formulation, coupled to a diffusion term, is incorporated into a continuum formalism, and simulation results are compared one-to-one against MD simulations of 1D reaction propagation along different crystallographic directions and with different initial temperatures. A good agreement is found for both the temporal and spatial evolution of the temperature field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗