Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Strontium and Barium Isotopes in Presolar Silicon Carbide Graines Measured with CHILI-Two Types of X Grains.

We used CHILI, the Chicago Instrument for Laser Ionization, a new resonance ionization mass spectrometer developed for isotopic analysis of small samples, to analyze strontium, zirconium, and barium isotopes in 22 presolar silicon carbide grains. Twenty of the grains showed detectable strontium and barium, but none of the grains had enough zirconium to be detected with CHILI. Nine grains were excluded from further consideration since they showed very little signals (<1000 counts) for strontium as well as for barium. Among the 11 remaining grains, we found three X grains. The discovery of three supernova grains among only 22 grains was fortuitous, because only similar to 1% of presolar silicon carbide grains are type X, but was confirmed by silicon isotopic measurements of grain residues with NanoSIMS. While one of the X grains showed strontium and barium isotope patterns expected for supernova grains, the two other supernova grains have Sr-87/Sr-86 <0.5, values never observed in any natural sample before. From their silicon isotope ratios, the latter two grains can be classified as X2 grains, while the former grain belongs to the more common X1 group. The differences of these grains in strontium and barium isotopic composition constrain their individual formation conditions in Type II supernovae. (C) 2017 Elsevier Ltd. All rights reserved.

barium isotopes↗

Desulfurization Reactions on Surfaces of Metal Carbides: Photoemission and Density-Functional Studies

High-resolution photoemission and density functional (DF) calculations were used to study the interaction of atomic sulfur and S-containing molecules with metal carbides in which the carbon/metal ratio varies from 0.5 to 1 (M2C and MC, M = Ti, V or Mo). In these compounds, the C sites cannot be considered as simple spectators. They moderate the reactivity of the metal centers and provide bonding sites for adsorbates. For example, the adsorption of S on TiC(001) induces a large positive shift (1.0-1.3 eV) in the C 1s core level. DF calculations give a CTiTi hollow as the most stable site for the S adatoms. There is a correlation between the adsorption energy of S or thiophene and shifts in the centroid of the metal d band induced by metal-carbon bonding in the metal carbides. The M2C and MC carbides have difficulty obeying Sabatier's principle for being good HDS catalysts because some of them interact too strongly with the products (M2C stoichiometry) and the others have problems dissociating the reactants (MC stoichiometry). The addition of small Au nanoparticles is an efficient way for enhancing the HDS activity of MC catalysts. In spite of the very poor desulfurization performance of TiC and MoC, the Au/TiC and Au/MoC systems display an HDS activity comparable or higher than that of conventional Ni/MoS{sub x} catalysts. The Au nanoparticles probably increase the HDS activity of the metal carbides by enhancing the adsorption energy of thiophene and by helping in the dissociation of H2 to produce the hydrogen necessary for the hydrogenolysis of C-S bonds and the removal of sulfur.

08 HYDROGEN↗

Elastic properties, sp³ fraction, and Raman scattering in low and high pressure synthesized diamond-like boron rich carbides

Dense BC{sub x} phases with high boron concentration are predicted to be metastable, superhard, and conductors or superconductors depending on boron concentration. However, up to this point, diamond-like boron rich carbides BC{sub x} (dl-BC{sub x}) phases have been thought obtainable only through high pressure and high temperature treatment, necessitating small specimen volume. Here, we use electron energy loss spectroscopy combined with transmission electron microscopy, Raman spectroscopy, surface Brillouin scattering, laser ultrasonics (LU) technique, and analysis of elastic properties to demonstrate that low pressure synthesis (chemical vapor deposition) of BC{sub x} phases may also lead to the creation of diamond-like boron rich carbides. The elastic properties of the dl-BC{sub x} phases depend on the carbon sp²versus sp³ content, which decreases with increasing boron concentration, while the boron bonds determine the shape of the Raman spectra of the dl-BC{sub x} after high pressure-high temperature treatment. Using the estimation of the density value based on the sp³ fraction, the shear modulus μ of dl-BC₄, containing 10% carbon atoms with sp³ bonds, and dl-B₃C₂, containing 38% carbon atoms with sp³ bonds, were found to be μ = 19.3 GPa and μ = 170 GPa, respectively. The presented experimental data also imply that boron atoms lead to a creation of sp³ bonds during the deposition processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of zirconium carbides using electron microscopy, optical anisotropy, Auger depth profiles, X-ray diffraction, and electron density calculated by charge flipping method

Samples with five different zirconium carbide compositions (C/Zr molar ratio=0.84, 0.89, 0.95, 1.05, and 1.17) have been fabricated and studied using a variety of experimental techniques. Each sample was zone refined to ensure that the end product was polycrystalline with a grain size of 10-100 {mu}m. It was found that the lattice parameter was largest for the x=0.89 composition and smallest for the x=1.17 total C/Zr composition, but was not linear; this nonlinearity is possibly explained using electron densities calculated using charge flipping technique. Among the five samples, the unit cell of the ZrC{sub 0.89} sample showed the highest electron density, corresponding to the highest carbon incorporation and the largest lattice parameter. The ZrC{sub 0.84} sample showed the lowest carbon incorporation, resulting in a larger number of carbon vacancies and resultant strain. Samples with larger carbon ratios (x=0.95, 1.05, and 1.17) showed a slight decrease in lattice parameter, due to a decrease in electron density. Optical anisotropy measurements suggest that these three samples contained significant amounts of a graphitic carbon phase, not bonded to the Zr atoms. - Graphical abstract: Characterization of zirconium carbides using electron microscopy, optical anisotropy, Auger depth profiles, X-ray diffraction, and electron density calculated by the charge flipping method. Highlights: Black-Right-Pointing-Pointer The lattice parameter variation: ZrC{sub 0.89}>ZrC{sub 0.84}>ZrC{sub 0.95}>ZrC{sub 1.05}>ZrC{sub 1.17}. Black-Right-Pointing-Pointer Surface oxygen with no correlation to the lattice parameter variation. Black-Right-Pointing-Pointer ZrC{sub 0.89} had highest electron densities correspond to highest carbon incorporation. Black-Right-Pointing-Pointer Second highest lattice parameter in ZrC{sub 0.84} due to strain. Black-Right-Pointing-Pointer Unit cell electron density order: ZrC{sub 0.95}>ZrC{sub 1.05}>ZrC{sub 1.17}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steam Reforming on Transition-metal Carbides from Density-functional Theory

A screening study of the steam reforming reaction on clean and oxygen covered early transition-metal carbides surfaces is performed by means of density-functional theory calculations. It is found that carbides provide a wide spectrum of reactivities, from too reactive via suitable to too inert. Several molybdenum-based systems are identified as possible steam reforming catalysts. The findings suggest that carbides provide a playground for reactivity tuning, comparable to the one for pure metals.

36 MATERIALS SCIENCE↗

Transition metal carbide catalysts for biomass conversion: A review

The increasing demand for sustainable energy resources has initiated the investigation of biomass conversion over a wide range of catalysts. Among those, transition metal carbides have been extensively studied which demonstrated distinct reactivity and/or selectivity from transition or noble metals in a variety of chemical reactions. In this review, we summarize recent advances in the synthesis of transition metal carbides and their applications in biomass conversion, particularly focusing on the catalytic conversions of (hemi)cellulose, lignin and some typical platform chemicals to fuels or fine chemicals involving C-C, C-O-C and C-O-H bonds cleavages. Perspectives regarding the future research directions on the improvement of transition metal carbide catalysts and detailed reaction mechanism studies are also presented.

Pang, Jifeng↗

Iron Carbides in Fischer–Tropsch Synthesis: Theoretical and Experimental Understanding in Epsilon-Iron Carbide Phase Assignment

As active phases in low-temperature Fischer–Tropsch synthesis for liquid fuel production, epsilon iron carbides are critically important industrial materials. However, the precise atomic structure of epsilon iron carbides remains unclear, leading to a half-century of debate on the phase assignment of the ε-Fe 2 C and ε’-Fe 2.2 C. Here, we resolve this decades-long question by a combining theoretical and experimental investigation to assign the phases unambiguously. First, we have investigated the equilibrium structures and thermal stabilities of ε-Fe x C, (x = 1, 2, 2.2, 3, 4, 6, 8) by first-principles calculations. We have also acquired X-ray diffraction patterns and Mössbauer spectra for these epsilon iron carbides, and compared them with the simulated results. These analyses indicate that the unit cell of ε-Fe 2 C contains only one type of chemical environment for Fe atoms, while ε’-Fe 2.2 C has six sets of chemically distinct Fe atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Silicon carbide sintered body manufactured from silicon carbide powder containing boron, silicon and carbonaceous additive

A silicon carbide powder of a 5-micron grain size is mixed with 0.15 to 0.60 wt% mixture of a boron compound, i.e., boric acid, boron carbide (B4C), silicon boride (SiB4 or SiB6), aluminum boride, etc., and an aluminum compound, i.e., aluminum, aluminum oxide, aluminum hydroxide, aluminum carbide, etc., or aluminum boride (AlB2) alone, in such a proportion that the boron/aluminum atomic ratio in the sintered body becomes 0.05 to 0.25 wt% and 0.05 to 0.40 wt%, respectively, together with a carbonaceous additive to supply enough carbon to convert oxygen accompanying raw materials and additives into carbon monoxide.

Tanaka, Hidehiko↗

Diffusion bonding of silicon carbide using iridium and hermetic silicon carbide-iridium bonds

An exemplary method of bonding of silicon carbide and objects having a hermetic silicon carbide-iridium-silicon carbide bond. The method includes the steps of inserting an iridium foil between two SiC layers; heating the iridium foil and SiC layers at a temperature of 1500 C in a vacuum of <10−5 ton; applying a pressure between 1 ksi and 7 ksi to the iridium foil and SiC layers; maintaining the temperature and pressure for 6-10 hours; and forming a hermetic seal having a leak rate <3×10−9 cm3/sec between the iridium foil and the two SiC layers. The SiC-iridium bonds lack cracks and are hermetic.

Cockeram, Brian V.↗

Pechini synthesis and characterization of molybdenum carbide and nickel molybdenum carbide

Carbides, such as {eta}-Ni{sub 6}Mo{sub 6}C, are considered as low-cost substitutes for noble metal catalysts for present applications in hydrodesulfurization and for a possible future sulfur-tolerant fuel cell anode catalyst. Most synthesis methods set the carbon content of the carbides by a carbon-based atmosphere or solid carbon in the synthesis. We show here that {beta}-Mo{sub 2}C and {eta}-Ni{sub 6}Mo{sub 6}C can be synthesized using a Pechini process, simply by heating metal acetates mixed with citric acid and ethylene glycol in one step under H{sub 2} with the only source of carbon being the precursor solution. The {beta}-Mo{sub 2}C forms when heating a Mo-acetate precursor at 850 deg. C. When using Ni- and Mo-acetates, {beta}-Mo{sub 2}C forms at 700 deg. C and lower temperatures, while {eta}-Ni{sub 6}Mo{sub 6}C forms during heating at 800-900 deg. C. The {eta}-Ni{sub 6}Mo{sub 6}C has a surface area of 95.5 m{sup 2} g{sup -1} and less than 10 m{sup 2} g{sup -1} when prepared at 800 and 900 deg. C, respectively. Some Ni{sub 3}C, Ni, and NiC impurities are also present in the nanostructured {eta}-Ni{sub 6}Mo{sub 6}C that was prepared at 900 deg. C. The {eta}-Ni{sub 6}Mo{sub 6}C materials made by the Pechini process are compared with those made from a traditional synthesis, using metal organic precursors at 1000 deg. C under CO/CO{sub 2} mixtures with a carbon activity of 0.011. Our results imply that H{sub 2} and the Pechini process can be used to achieve carbon activities similar to those obtained by methods using gaseous or solid carbon sources. - Graphical abstract: Ball and stick representation of the {eta}-Ni{sub 6}Mo{sub 6}C crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic layer deposition of amorphous niobium carbide-based thin film superconductors.

Niobium carbide thin films were synthesized by atomic layer deposition (ALD) using trimethylaluminum (TMA), NbF{sub 5}, and NbCl{sub 5} precursors. In situ quartz crystal microbalance (QCM) measurements performed at 200 and 290 C revealed controlled, linear deposition with a high growth rate of 5.7 and 4.5 {angstrom}/cycle, respectively. The chemical composition, growth rate, structure, and electronic properties of the films were studied over the deposition temperature range 125-350 C. Varying amounts of impurities, including amorphous carbon (a-C), AlF{sub 3}, NbF{sub x}, and NbCl{sub x}, were found in all samples. A strong growth temperature dependence of film composition, growth rate, and room temperature DC resistivity was observed. Increasing film density, decreasing total impurity concentration, and decreasing resistivity were observed as a function of increasing deposition temperature for films grown with either NbF{sub 5} or NbCl{sub 5}. Superconducting quantum interference device (SQUID) magnetometry measurements down to 1.2 K revealed a superconducting transition at T{sub c} = 1.8 K in a 75 nm thick film grown at 350 C with TMA and NbF{sub 5}. The superconducting critical temperature could be increased up to 3.8 K with additional use of NH{sub 3} during ALD film growth.

42 ENGINEERING↗

Silicidation of Tantalum Carbide and Zirconium Carbide Powders in a Gaseous SiO Environment

Tantalum carbide and zirconium carbide powders have been silicided in a gaseous SiO atmosphere at 1400°C. X-ray diffraction and energy dispersive X-ray microanalysis results demonstrate that the silicidation products are Ta{sub 5}Si{sub 3} and TaSi{sub 2} in the case of TaC and ZrSi in the case of ZrC. The silicidation rate has been shown to influence the percentages of these silicides in the reaction products. The degree of silicidation reached in this study is about 20% in the case of TaC and about 16% in the case of ZrC.

36 MATERIALS SCIENCE↗

High-pressure polymorphism of two high-strength ceramics: Boron carbide (B4C) and silicon carbide (SiC)

We have determined the lattice-level structure of two high-strength, technologically important ceramic materials under shock wave compression. For decades, laboratory shock wave studies have provided crucial information on the dynamic response of many types of materials. However, previous studies were limited to continuum-level information only. By combining laser compression with pulsed X-ray diffraction we are able to obtain in situ structural information on these materials for the first time. Silicon carbide (SiC) and boron carbide (B4C) are two high-strength ceramics with many technical applications including debris shielding, armoring, and coating. We have carried out Xray diffraction measurements of the structure of SiC and B4C under shock compression to 185 and 300 GPa, respectively. Experiments were performed at the Matter in Extreme Conditions beamline of the Linac Coherent Light Source (LCLS). At LCLS, shock waves are driven into the sample using a high powered laser with approximately 10 nanosecond pulse length. The sample is probed with X-rays from the LCLS free electron laser and diffraction is recorded by x-ray detectors. By varying the delay between the laser and the x-ray probe, the sample can be studied at various times relative to the shock wave entering the sample. The diffraction data have been analyzed to determine the crystal structures, lattice parameters, density, and crystallographic texture as a function of pressure and loading time.

36 MATERIALS SCIENCE↗