Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “branching process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Why are cell populations maintained via multiple compartments?

We consider the maintenance of ‘product’ cell populations from ‘progenitor’ cells via a sequence of one or more cell types, or compartments, where each cell’s fate is chosen stochastically. If there is only one compartment then large amplification, that is, a large ratio of product cells to progenitors comes with disadvantages. The product cell population is dominated by large families (cells descended from the same progenitor) and many generations separate, on average, product cells from progenitors. These disadvantages are avoided using suitably constructed sequences of compartments: the amplification factor of a sequence is the product of the amplification factors of each compartment, while the average number of generations is a sum over contributions from each compartment. Passing through multiple compartments is, in fact, an efficient way to maintain a product cell population from a small flux of progenitors, avoiding excessive clonality and minimizing the number of rounds of division en route. We use division, exit and death rates, estimated from measurements of single-positive thymocytes, to choose illustrative parameter values in the single-compartment case. We also consider a five-compartment model of thymocyte differentiation, from double-negative precursors to single-positive product cells.

59 BASIC BIOLOGICAL SCIENCES↗

Evidence of the h c → K S 0 K + π − + c . c . decay

Based on ( 2.712 ± 0.014 ) × 10 9 ψ ( 3686 ) events collected by the BESIII Collaboration, evidence of the hadronic decay h c → K S 0 K + π − + c . c . is found with a significance of 4.3 σ in the ψ ( 3686 ) → π 0 h c process. The branching fraction of h c → K S 0 K + π − + c . c . is measured to be ( 7.3 ± 1.8 ± 0.8 ) × 10 − 4 , where the first and second uncertainties are statistical and systematic, respectively. Combining with the exclusive decay width of η c → K K ¯ π , our result indicates inconsistencies with both pQCD and NRQCD predictions. Published by the American Physical Society 2024

Ablikim, M.↗

Impact of T - and ρ -dependent decay rates and new (n, γ ) cross-sections on the s process in low-mass asymptotic giant branch stars

Aims. We study the impact of nuclear input related to weak-decay rates and neutron-capture reactions on predictions for the slow neutron-capture process (s process) in asymptotic giant branch (AGB) stars. We provide the first database of surface abundances and stellar yields of the isotopes heavier than iron from the Monash models. Methods. We ran nucleosynthesis calculations with the Monash post-processing code for seven stellar structure evolution models of low-mass AGB stars with three different sets of nuclear inputs. The reference set has constant decay rates and represents the set used in the previous Monash publications. The second set contains the temperature and density dependence of β decays and electron captures based on the default rates of nuclear NETwork GENerator (NETGEN). In the third set, we further update 92 neutron-capture rates based on re-evaluated experimental cross sections from the ASTrophysical Rate and rAw data Library. We compare and discuss the predictions of the sets relative to each other in terms of isotopic surface abundances and total stellar yields. We also compare the results to isotopic ratios measured in presolar stardust silicon carbide (SiC) grains from AGB stars. Results. The new sets of models result in a ∼66% solar s-process contribution to the p-nucleus 152 Gd, confirming that this isotope is predominantly made by the s process. The nuclear input updates result in predictions for the 80 Kr/ 82 Kr ratio in the He intershell and surface 64 Ni/ 58 Ni, 94 Mo/ 96 Mo, and 137 Ba/ 136 Ba ratios that are more consistent with the corresponding ratios measured in stardust; however, the new predicted 138 Ba/ 136 Ba ratios are higher than the typical values of the SiC grains. The W isotopic anomalies are in agreement with data from the analyses of other meteoritic inclusions. We confirm that the production of 176 Lu and 205 Pb is affected by too large uncertainties in their decay rates from NETGEN.

79 ASTRONOMY AND ASTROPHYSICS↗

Groundwater and surface water head from 2019 to 2022 at the Tims Branch in Savannah River Site (SRS), South Carolina.

This dataset contains groundwater and surface water head measurements for investigating hydro-biogeochemical processes in Tims Branch at the Savannah River Site, SC. Water levels were monitored using pressure transducers installed in surface water gauges and piezometers across three subsites in Tims Branch, identified as Wfloc, Snon (Snon1 and Snon2), and Sfloc. A barometric pressure logger was deployed in piezometers to correct pressure transducers from atmospheric pressure. Manual water level measurements were taken to calibrate transducer data. The dataset consists of at least paired groundwater and surface water head time series for each subsite, provided as individual CSV files. These data support analyses of surface-groundwater interactions, hydrologic controls on redox processes, and broader synthesis of wetland hydrology at the Savannah River Site.

ESS-DIVE CSV File Formatting Guidelines Reporting ↗

Amplitude analysis and branching fraction measurement of the decay D+ → ${\textrm{K}}_{\textrm{S}}^0$π + π 0 π 0

Using 2.93 fb-1 of e+e- collision data collected with the BESIII detector at the center-of-mass energy 3.773 GeV, we perform the first amplitude analysis of the decay D+ → ${K}^0_S$π + π 0 π 0 and determine the relative magnitudes and phases of different intermediate processes. The absolute branching fraction of D+ → ${K}^0_S$π + π 0 π 0 is measured to be (2.888 ± 0.058 stat. ± 0.069 syst. )%. The dominant intermediate processes are D+ → ${K}^0_S$a 1 (1260) + (→ ρ + π 0 ) and D+ → $\overline{K}$*0 ρ +, with branching fractions of (8.66 ± 1.04 stat. ± 1.39 syst. ) × 10 -3 and (9.70 ± 0.81 stat. ± 0.53 syst. ) × 10 -3 , respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Commissioning of the Mu2e tracker DAQ, planning for the Vertical Slice Test and pre-pattern recognition studies

The primary objective of the Mu2e experiment at Fermilab is to search for the neutrino-less coherent $\mu \rightarrow e$ conversion in the field of an aluminum nucleus ($\mu^- \text{Al} \rightarrow e^- \text{Al}$). The signature of this process is a monochromatic Conversion Electron (CE) with an energy of approximately 104.97 MeV \cite{bartoszek2015mu2e}. Within the Standard Model (SM), the branching ratio for this process, including neutrino masses and oscillation, is expected to be less than $\mathcal{O}(10^{-50})$. This value is far beyond current experimental capabilities. However, models of physics beyond the SM predict much higher relative rates, approaching an observable level. The SINDRUM II experiment set an upper limit on muon conversion at $7 \times 10^{-13}$ (90\% CL) on Au target \cite{SINDRUMII:2006dvw}, and the Mu2e collaboration aims to improve this limit by four orders of magnitude. Observing this process would provide a clear evidence of physics beyond the Standard Model. A brief discussion of the theoretical and experimental aspects is provided in Chapter \ref{intr}. Mu2e adopts a sophisticated experimental setup to achieve its goals, further described in Chapter \ref{mu2echapter}. The central part of the Mu2e detector is the tracker, that consists of 18 tracking stations. The tracker must provide excellent momentum resolution, approximately 1 MeV/c, to distinguish the monochromatic CE signal from the background. To minimize the energy losses, a straw tube tracker will be used \cite{bobbb}. Chapter \ref{chaptertrk} provides an overview of the straw tracker design and its working principles. This Thesis presents a comprehensive study of the Mu2e tracker, covering complementary aspects from initial commissioning to optimization and first steps of the calibration processes. My work at Fermilab has been focused on the complete Data Acquisition (DAQ) testing from both hardware and software perspectives. I was involved in the commissioning of the Mu2e DAQ system and the Vertical Slice Test (VST) of the tracker. The VST encompasses the entire testing chain, from the straws to the readout, and to processed data on disk. I was also focused on the offline analysis, especially on pre-pattern recognition studies, to explore the best methods for identifying $\delta$-electrons during the data taking. Chapter \ref{commissioning} details the commissioning of the tracker DAQ system, emphasizing the importance of understanding of the readout process before the data acquisition. This includes validating the readout logic and firmware through Monte Carlo simulations to confirm functionality and buffering, monitoring the quality of the data from the tracker preamplifiers and front-end electronics, and assessing overall DAQ performance to ensure reliability during future calibration and data-taking. Chapter \ref{planning} discusses the initial steps towards the tracker calibration. The ultimate goal is to perform a time calibration of the first assembled station of the tracker using cosmic muons, aiming for a longitudinal hit position resolution better than 4 cm. This involves determining the signal propagation times and channel-to-channel delays. I performed a Monte Carlo study to determine the impact of the station orientation on the quality of the calibration, in particular on the cosmic track reconstruction, focusing on potential biases that could arise. These studies provide essential insights into the operation, optimization, and calibration of the Mu2e tracker system. Given the high data volume expected during Mu2e operations, estimated at approximately 7 PBytes per year, optimizing memory usage and minimizing CPU consumption are critical. A significant challenge lies in effectively flagging $\delta$-electron hits, which are the primary source of hits in the tracker, without compromising the efficiency of CE hit detection and track reconstruction. A detailed study of pre-pattern recognition and a thorough comparison of two $\delta$-electron flagging algorithms is provided in Chapter \ref{delta}. In Chapter \ref{conclusions}, the findings are concisely summarized, offering a comprehensive synthesis of the research and emphasizing the key insights derived from this study.

43 PARTICLE ACCELERATORS↗

Overlooked branch turnover creates a widespread bias in forest carbon accounting

Most measurements and models of forest carbon cycling neglect the carbon flux associated with the turnover of branch biomass, a physiological process quantified for other organs (fine roots, leaves, and stems). Synthesizing data from boreal, temperate, and tropical forests (184,815 trees), we found that including branch turnover increased empirical estimates of aboveground wood production by 16% (equivalent to 1.9 Pg Cy −1 globally), of similar magnitude to the observed global forest carbon sinks. In addition, reallocating carbon to branch turnover in model simulations reduced stem wood biomass, a long-lasting carbon storage, by 7 to 17%. This prevailing neglect of branch turnover suggests widespread biases in carbon flux estimates across global datasets and model simulations. Branch litterfall, sometimes used as a proxy for branch turnover, ignores carbon lost from attached dead branches, underestimating branch C turnover by 38% in a pine forest. Modifications to field measurement protocols and existing models are needed to allow a more realistic partitioning of wood production and forest carbon storage.

Lim, Hyungwoo↗

Study of e+e- → γΦJ/ψ from $\sqrt{s}$ = 4.600 to 4.951 GeV

Using data samples with an integrated luminosity of 6.4 fb -1 collected by the BESIII detector operating at the BEPCII storage ring, the process of e+e- → γΦJ/ψ is studied. The processes of e + e - → Φχc1,c2, χc1,c2 → γJ/ψ are observed with a significance of more than 10σ. The √s-dependent cross section of e + e - → Φχc1,c2 is measured between 4.600 and 4.951 GeV, and evidence of a resonance structure is found for the first time in the Φχc2 process. We also search for the processes of e + e - → γX(4140), γX(4274) and γX(4500) via the γΦJ/ψ final state, but no obvious structures are found. The upper limits on the production cross section times the branching fraction for these processes at the 90% confidence level are reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a heavy Higgs boson decaying into two lighter Higgs bosons in the ττbb final state at 13 TeV

A search for a heavy Higgs boson H decaying into the observed Higgs boson h with a mass of 125 GeV and another Higgs boson hS is presented. The h and hS bosons are required to decay into a pair of tau leptons and a pair of b quarks, respectively. The search uses a sample of proton-proton collisions collected with the CMS detector at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 137 fb -1 . Mass ranges of 240–3000 GeV for m H and 60–2800 GeV for m h S are explored in the search. No signal has been observed. Model independent 95% confidence level upper limits on the product of the production cross section and the branching fractions of the signal process are set with a sensitivity ranging from 125 fb (for m H = 240 GeV) to 2.7 fb (for m H = 1000 GeV). These limits are compared to maximally allowed products of the production cross section and the branching fractions of the signal process in the next-to-minimal supersymmetric extension of the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Amplitude analysis and branching fraction measurement of the decay $D_s^{+}$ → $π^+π^0π^0$

Using a data set corresponding to an integrated luminosity of 6.32 fb –1 recorded by the BESIII detector at center-of-mass energies between 4.178 and 4.226 GeV, an amplitude analysis of the decay $D_s^{+}$ → $π^+π^0π^0$ is performed, and the relative fractions and phases of different intermediate processes are determined. The absolute branching fraction of the decay $D_s^{+}$ → $π^+π^0π^0$ is measured to be (0.50 ± 0.04 stat ± 0.02 syst )%. The absolute branching fraction of the intermediate process $D_s^{+}$ → $f_o$(980)$π^+$, $f_o$(980) → $π^oπ^o$ is determined to be (0.28 ± 0.04 stat ± 0.04 syst )%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved thermonuclear rate of 42 Ti( p , γ ) 43 V and its astrophysical implication in the rp process

Context. Accurate 42 Ti(p,γ) 43 V reaction rates are crucial for understanding the nucleosynthesis path of the rapid capture process (rp process) that occurs in X-ray bursts. Aims. We aim to improve the thermonuclear rates of 42 Ti(p,γ) 43 V based on more complete resonance information and a more accurate direct component, together with the recently released nuclear masses data. We also explore the impact of the newly obtained rates on the rp process. Methods. We reevaluated the reaction rate of 42 Ti(p,γ) 43 V by the sum of the isolated resonance contribution instead of the Hauser-Feshbach statistical model. We used a Monte Carlo method to derive the associated uncertainties of new rates. The nucleosynthesis simulations were performed via the NuGrid post-processing code ppn. Results. The new rates differ from previous estimations due to the use of a series of updated resonance parameters and a direct S factor. Compared with the previous results from the Hauser-Feshbach statistical model, which assumes compound nucleus 43 V with a sufficiently high-level density in the energy region of astrophysical interest, large differences exist over the entire temperature region of rp-process interest, up to two orders of magnitude. We consistently calculated the photodisintegration rate using our new nuclear masses via the detailed balance principle, and found the discrepancies among the different reverse rates are much larger than those for the forward rate, up to ten orders of magnitude at the temperature of 10 8 K. Using a trajectory with a peak temperature of 1.95×10 9 K, we performed the rp-process nucleosynthesis simulations to investigate the impact of the new rates. Our calculations show that the adoption of the new forward and reverse rates result in abundance variations for Sc and Ca of 128% and 49%, respectively, compared to the variations for the statistical model rates. On the other hand, the overall abundance pattern is not significantly affected. The results of using new rates also confirm that the rp-process path does not bypass the isotope 43 V. Conclusions. Our study found that the Hauser-Feshbach statistical model is inappropriate to the reaction rate evaluation for 42 Ti(p,γ) 43 V. The adoption of the new rates confirms that the reaction path of 42 Ti(p,γ) 43 V(p,γ) 44 Cr(β + ) 44 V is a key branch of the rp process in X-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for a resonance decaying into a scalar particle and a Higgs boson in the final state with two bottom quarks and two photons with 199 fb −1 of data collected at $\sqrt{s}$ = 13 and 13.6 TeV with the ATLAS detector

A search for the resonant production of a heavy scalar X decaying into a lighter scalar S and a Higgs boson, through the process X → S (→ $b\bar{b}$) H (→ γγ) , where the two photons are consistent with the Higgs boson decay, is performed. The search is conducted using integrated luminosities of 140 and 59 fb −1 of proton–proton collision data at centre-of-mass energies of 13 and 13.6 TeV, respectively, recorded with the ATLAS detector at the LHC. The search is performed over the mass ranges of 170 ≤ m X ≤ 1000 GeV and 15 ≤ m S ≤ 500 GeV. No significant excess over the Standard Model background predictions is observed and limits at 95% confidence level are set on the product of cross section and branching fraction for the process X → S (→ $b\bar{b}$) H (→ γγ) at 13 TeV, ranging from 9 fb to 0.06 fb.

Aad, G. (ORCID:0000000266654934)↗

Teaching AI when to care about gender

Natural Language Processing (NLP) is a branch of Artificial Intelligence (AI) concerned with solving language tasks by modeling large amounts of textual data. Some NLP techniques use word embeddings which are semantic models where machine learning (ML) is used to learn to cluster semantically related words by learning about word co-occurrences in the original training text. Unfortunately, these models tend to reflect or even exaggerate biases that are present in the training corpus. Here we describe the Word Embedding Navigator (WEN), which is a tool for exploring word embedding models. We examine a specific potential use case for this tool: interactive discovery and neutralization of gender bias in word embedding models, and compare this human-in-the-loop approach to reducing bias in word embeddings with a debiasing post-processing technique.

97 MATHEMATICS AND COMPUTING↗

Search for a μ + μ − resonance in four-muon final states at Belle II

We report on a search for a resonance X decaying to a pair of muons in e + e − → μ + μ − X events in the 0.212 – 9.000 GeV / c 2 mass range, using 178 fb − 1 of data collected by the Belle II experiment at the SuperKEKB collider at a center of mass energy of 10.58 GeV. The analysis probes two different models of X beyond the standard model: a Z ′ vector boson in the L μ − L τ model and a muonphilic scalar. We observe no evidence for a signal and set exclusion limits at the 90% confidence level on the products of cross section and branching fraction for these processes, ranging from 0.046 fb to 0.97 fb for the L μ − L τ model and from 0.055 fb to 1.3 fb for the muonphilic scalar model. For masses below 6 GeV / c 2 , the corresponding constraints on the couplings of these processes to the standard model range from 0.0008 to 0.039 for the L μ − L τ model and from 0.0018 to 0.040 for the muonphilic scalar model. These are the first constraints on the muonphilic scalar from a dedicated search. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Observation of D + → K S 0 a 0 ( 980 ) + in the Amplitude Analysis of D + → K S 0 π + η

We perform for the first time an amplitude analysis of the decay D + → K S 0 π + η and report the observation of the decay D + → K S 0 a 0 ( 980 ) + using 2.93 fb − 1 of e + e − collision data taken at a center-of-mass energy of 3.773 GeV with the BESIII detector. As the only W -annihilation-free decay among D to a 0 ( 980 ) pseudoscalar, D + → K S 0 a 0 ( 980 ) + is the ideal decay in extracting the contributions of the W -emission amplitudes involving a 0 ( 980 ) and to study the final-state interactions. The absolute branching fraction of D + → K S 0 π + η is measured to be ( 1.27 ± 0.0 4 stat ± 0.0 3 syst ) % . The branching fractions of intermediate processes D + → K S 0 a 0 ( 980 ) + with a 0 ( 980 ) + → π + η and D + → π + K ¯ 0 * ( 1430 ) 0 with K ¯ 0 * ( 1430 ) 0 → K S 0 η are measured to be ( 1.33 ± 0.0 5 stat ± 0.0 4 syst ) % and ( 0.14 ± 0.0 3 stat ± 0.0 1 syst ) % , respectively. Published by the American Physical Society 2024

Physics↗

Radiative decay branching ratio of the Hoyle state

The triple-alpha process is a vital reaction in nuclear astrophysics, characterized by two consecutive reactions [2α ⇌ 8 Be (α, γ) 12 C] that drive carbon formation. The second reaction occurs through the Hoyle state, a 7.65 MeV excited state in 12 C with J π = 0 + . The rate of the process depends on the radiative width, which can be determined by measuring the branching ratio for electromagnetic decay. Recent measurements by Kibédi et al. conflicted with the adopted value and resulted in a significant increase of nearly 50% in this branching ratio, directly affecting the triple-alpha reaction. Here, this work aims to utilize charged-particle spectroscopy with magnetic selection as a means to accurately measure the total radiative branching ratio (Γ rad /Γ) of the Hoyle state in 12 C.

6 ≤ A ≤ 19↗

Hydrological Perspectives on Integrated, Coordinated, Open, Networked (ICON) Science

Hydrologic sciences depend on data monitoring, analyses, and simulations of hydrologic processes to ensure safe, sufficient, and equal water distribution. These hydrologic data come from but are not limited to primary (lab, plot, and field experiments) and secondary sources (remote sensing, UAVs, hydrologic models) that typically follow FAIR Principles (Findable, Accessible, Interoperable, and Reusable: (go-fair.org)). Easy availability of FAIR data has become possible because the hydrology-oriented organizations have pushed the community to increase coordination of the protocols for generating data and sharing model platforms. In addition, networking at all levels has emerged with an invigorated effort to activate community science efforts that complement conventional data collection methods. However, it has become difficult to decipher various complex hydrologic processes with increasing data. Machine learning, a branch of artificial intelligence, provide more accurate and faster alternatives to better understand different hydrological processes. The Integrated, Coordinated, Open, Networked (ICON) framework provides a pathway for water users to include and respect diversity, equity, and inclusivity. In addition, ICONs support the integration of peoples with historically marginalized identities into this professional discipline of water sciences. This article comprises three independent commentaries about the state of ICON principles in hydrology and discusses the opportunities and challenges of adopting them.

(ICON) principles to address↗