Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Entrainment and aerosol effects on marine boundary-layer clouds: An investigation using ACE-ENA data from HOLODEC, G1, Pico and ACTOS (Final Report on Project Activities)

Marine boundary-layer clouds cover large regions of the globe and are known to strongly influence radiative balances. The microphysical properties and persistence of these clouds are tightly coupled with cloud-top entrainment and aerosol properties within both the boundary layer and the overlying free troposphere. This work addressed the microphysical response to entrainment and aerosol properties in marine stratocumulus clouds, using data from the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) project. Specifically, emphasis was placed on 1. extensive in situ measurements taken with the Atmospheric Radiation Measurement (ARM) G1 aircraft using the Holographic Detector for Clouds (Holodec) instrument; 2. airborne measurements obtained with the helicopter-borne Airborne Cloud Turbulence Observation System (ACTOS) operated by the Leibniz Institute for Tropospheric Research (TROPOS) during the first phase of ACE-ENA; and 3. above-boundary-layer, mountain-top measurements taken at the Pico Mountain Observatory (OMP) by the research group of the co-investigator and scientists from TROPOS during the first phase of ACE-ENA. The work is aligned with the topic “Warm Boundary-Layer Atmospheric Processes.” Key results include the following. Data from the Holographic Detector for Clouds (Holodec) were reprocessed, refined, and validated through a careful instrument intercomparison, resulting in a high-quality dataset available on the ARM archive for ACE-ENA. High-resolution ACTOS measurements of thermodynamics, microphysical, and turbulence properties were analyzed to explore the behavior of the entrainment velocity at cloud top. Analysis of the vertical variability of cloud droplet size distribution shape suggests that mixing is more inhomogeneous near cloud top, and more homogeneous deeper into the cloud. Analysis of aerosol measurements from OMP explored the mixing state and cloud condensation nucleus properties, as well as the implications for radiative forcing. Finally, a machine learning algorithm was developed for identifying characteristic cloud droplet size distributions, and was employed to explore microphysical regimes in stratocumulus clouds observed during ACE-ENA. The characteristic size distributions are narrow, and only when spatially averaged do they produce the broad “gamma” distributions typically assumed in models. This implies that precipitation development should account for variability and correlations in the distribution shape as well as the number concentration of cloud droplets.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2015

RACORO Continental Boundary Layer Cloud Investigations: 3. Separation of Parameterization Biases in Single-Column Model CAM5 Simulations of Shallow Cumulus

Climatically important low-level clouds are commonly misrepresented in climate models. The FAst-physics System TEstbed and Research (FASTER) Project has constructed case studies from the Atmospheric Radiation Measurement Climate Research Facility's Southern Great Plain site during the RACORO aircraft campaign to facilitate research on model representation of boundary-layer clouds. This paper focuses on using the single-column Community Atmosphere Model version 5 (SCAM5) simulations of a multi-day continental shallow cumulus case to identify specific parameterization causes of low-cloud biases. Consistent model biases among the simulations driven by a set of alternative forcings suggest that uncertainty in the forcing plays only a relatively minor role. In-depth analysis reveals that the model's shallow cumulus convection scheme tends to significantly under-produce clouds during the times when shallow cumuli exist in the observations, while the deep convective and stratiform cloud schemes significantly over-produce low-level clouds throughout the day. The links between model biases and the underlying assumptions of the shallow cumulus scheme are further diagnosed with the aid of large-eddy simulations and aircraft measurements, and by suppressing the triggering of the deep convection scheme. It is found that the weak boundary layer turbulence simulated is directly responsible for the weak cumulus activity and the simulated boundary layer stratiform clouds. Increased vertical and temporal resolutions are shown to lead to stronger boundary layer turbulence and reduction of low-cloud biases.

parameterization↗
NASA NTRS2012

A FIRE-ACE/SHEBA Case Study of Mixed-Phase Arctic Boundary Layer Clouds: Entrainment Rate Limitations on Rapid Primary Ice Nucleation Processes

Observations of long-lived mixed-phase Arctic boundary layer clouds on 7 May 1998 during the First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment (FIRE)Arctic Cloud Experiment (ACE)Surface Heat Budget of the Arctic Ocean (SHEBA) campaign provide a unique opportunity to test understanding of cloud ice formation. Under the microphysically simple conditions observed (apparently negligible ice aggregation, sublimation, and multiplication), the only expected source of new ice crystals is activation of heterogeneous ice nuclei (IN) and the only sink is sedimentation. Large-eddy simulations with size-resolved microphysics are initialized with IN number concentration N(sub IN) measured above cloud top, but details of IN activation behavior are unknown. If activated rapidly (in deposition, condensation, or immersion modes), as commonly assumed, IN are depleted from the well-mixed boundary layer within minutes. Quasi-equilibrium ice number concentration N(sub i) is then limited to a small fraction of overlying N(sub IN) that is determined by the cloud-top entrainment rate w(sub e) divided by the number-weighted ice fall speed at the surface v(sub f). Because w(sub c)< 1 cm/s and v(sub f)> 10 cm/s, N(sub i)/N(sub IN)<< 1. Such conditions may be common for this cloud type, which has implications for modeling IN diagnostically, interpreting measurements, and quantifying sensitivity to increasing N(sub IN) (when w(sub e)/v(sub f)< 1, entrainment rate limitations serve to buffer cloud system response). To reproduce observed ice crystal size distributions and cloud radar reflectivities with rapidly consumed IN in this case, the measured above-cloud N(sub IN) must be multiplied by approximately 30. However, results are sensitive to assumed ice crystal properties not constrained by measurements. In addition, simulations do not reproduce the pronounced mesoscale heterogeneity in radar reflectivity that is observed.

Fridlin, Ann↗
DOE OSTI2023

Maximum Supersaturation in the Marine Boundary Layer Clouds Over the North Atlantic

Abstract The maximum supersaturation ( S x ) in clouds is a key parameter affecting the cloud's microphysical and radiative properties. We investigate the S x of the marine boundary layer clouds by combining airborne and surface observations in the Eastern North Atlantic. The cloud droplet number concentration ( N c ) in the least diluted cloud cores agrees well with the number concentration of particles larger than the Hoppel Minimum (HM) ( N >HM ) below clouds, indicating that the HM represents the average size threshold above which particles are activated to form cloud droplets. The S x values derived from surface observations vary from 0.10% to 0.50% from June 2017 to June 2018, with a clear seasonal variation exhibiting higher values during winter. Most of the S x variance (∼60%) can be explained by the cloud condensation nuclei (CCN) concentration and updraft velocity ( w ), with the CCN concentration playing a more important role than w in explaining the variation of S x . The influence of CCN concentration on S x leads to a buffered response of N c to aerosol perturbations. The response of N c to low aerosol concentration during winter is further buffered by the high w . The global Community Earth System Model (CESM) simulated S x values in the Azores have a positive bias compared to measured S x , likely due to overestimated w and underestimated CCN concentration. The CESM simulated S x exhibits higher values further north over the North Atlantic Ocean, which is attributed to stronger w . The suppression of S x by aerosol is also evident in regions with high CCN concentrations.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2016

Marine Boundary Layer Cloud Property Retrievals from High-Resolution ASTER Observations: Case Studies and Comparison with Terra MODIS

A research-level retrieval algorithm for cloud optical and microphysical properties is developed for the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) aboard the Terra satellite. It is based on the operational MODIS algorithm. This paper documents the technical details of this algorithm and evaluates the retrievals for selected marine boundary layer cloud scenes through comparisons with the operational MODIS Data Collection 6 (C6) cloud product. The newly developed, ASTERspecific cloud masking algorithm is evaluated through comparison with an independent algorithm reported in Zhao and Di Girolamo (2006). To validate and evaluate the cloud optical thickness (tau) and cloud effective radius (r(sub eff)) from ASTER, the high-spatial-resolution ASTER observations are first aggregated to the same 1000m resolution as MODIS. Subsequently, tau(sub aA) and r(sub eff, aA) retrieved from the aggregated ASTER radiances are compared with the collocated MODIS retrievals. For overcast pixels, the two data sets agree very well with Pearson's product-moment correlation coefficients of R greater than 0.970. However, for partially cloudy pixels there are significant differences between r(sub eff, aA) and the MODIS results which can exceed 10 micrometers. Moreover, it is shown that the numerous delicate cloud structures in the example marine boundary layer scenes, resolved by the high-resolution ASTER retrievals, are smoothed by the MODIS observations. The overall good agreement between the research-level ASTER results and the operational MODIS C6 products proves the feasibility of MODIS-like retrievals from ASTER reflectance measurements and provides the basis for future studies concerning the scale dependency of satellite observations and three-dimensional radiative effects.

marine boundary layer↗
DOE OSTI2023

Observational Investigation of the Effect of Turbulence on Microphysics and Precipitation in Warm Marine Boundary Layer Clouds

Abstract Turbulence is omnipresent in the marine boundary layer (MBL) and several mechanisms have been proposed regarding its role on MBL cloud microphysics. In particular, past modeling studies suggested that increasing turbulence broaden the droplet size distribution (DSD) and leads to precipitation initiation, this suggested relationship has not been evaluated yet using long‐term observations. Here, comprehensive retrievals from long‐term ground‐based observations are used to explore the impact of turbulence on microphysics and precipitation in drizzling MBL clouds. Our analysis supports that broader DSD and larger droplets are observed with strong turbulence, but interestingly, the precipitation is reduced instead of being enhanced. This suppression mechanism is mainly due to the entrainment and mixing process in which the entrained dry air evaporates cloud water. This study provides observational evidence to show the complex effect of turbulence on MBL cloud properties and implies the potential influence of turbulence on the clouds lifetime.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

Comparison of Marine Boundary Layer Cloud Properties from CERES-MODIS Edition 4 and DOE ARM AMF Measurements at the Azores

Marine boundary layer (MBL) cloud properties derived from the NASA Clouds and the Earth's Radiant Energy System (CERES) project using Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data are compared with observations taken at the Department of Energy Atmospheric Radiation Measurement (ARM) Mobile Facility at the Azores (AMF-Azores) site from June 2009 through December 2010. Cloud properties derived from ARM ground-based observations were averaged over a 1 h interval centered at the satellite overpass time, while the CERES-MODIS (CM) results were averaged within a 30 km×30 km grid box centered over the Azores site. A total of 63 daytime and 92 nighttime single-layered overcast MBL cloud cases were selected from 19 months of ARM radar-lidar and satellite observations. The CM cloud top/base heights (Htop/Hbase) were determined from cloud top/base temperatures (Ttop/Tbase) using a regional boundary layer lapse rate method. For daytime comparisons, the CM-derived Htop (Hbase), on average, is 0.063 km (0.068 km) higher (lower) than its ARM radar-lidar-observed counterpart, and the CM-derived Ttop and Tbase are 0.9 K less and 2.5 K greater than the surface values with high correlations (R(sup 2) = 0.82 and 0.84, respectively). In general, the cloud top comparisons agree better than the cloud base comparisons, because the CM cloud base temperatures and heights are secondary products determined from cloud top temperatures and heights. No significant day-night difference was found in the analyses. The comparisons of MBL cloud microphysical properties reveal that when averaged over a 30 km× 30 km area, the CM-retrieved cloud droplet effective radius (re) at 3.7 micrometers is 1.3 micrometers larger than that from the ARM retrievals (12.8 micrometers), while the CM-retrieved cloud liquid water path (LWP) is 13.5 gm( exp -2) less than its ARM counterpart (114.2 gm( exp-2) due to its small optical depth (9.6 versus 13.7). The differences are reduced by 50% when the CM averages are computed only using the MODIS pixel nearest the AMF site. Using the effective radius retrieved using 2.1 micrometers channel to calculate LWP can reduce the difference between the CM and ARM microwave radiometer retrievals from 13.7 to 2.1 gm2. The 10% differences between the ARM and CERES-MODIS LWP and r(sub e) retrievals are within the uncertainties of the ARM LWP (approximately 20gm( exp -2)) and r(sub e) (approximately 10%) retrievals; however, the 30% difference in optical depth is significant. Possible reasons contributing to this discrepancy are increased sensitivities in optical depth from both surface retrievals when τ is approximately 10 and topography. The τ differences vary with wind direction and are consistent with the island orography.Much better agreement in τ is obtained when using only those data taken when the wind is from the northeast, where topographical effects on the sampled clouds are minimal.

Xi, Baike↗
DOE OSTI2025

Evaluation of Marine Boundary Layer Clouds Over the Northeast Pacific During the CSET Campaign in E3SM Version 2

It is still challenging to reproduce marine boundary layer (MBL) clouds well in large-scale models despite their importance to the Earth's radiation budget and hydrological cycle. This study evaluates representation of the MBL and clouds in the Energy Exascale Earth System Model (E3SM) version 2. This study compares the E3SM simulation results with remote sensing and reanalysis data during the Cloud System Evolution in the Trades (CSET) field campaign to better understand the stratocumulus-to-cumulus cloud transition (SCT) over the northeast Pacific. E3SM results are extracted along the CSET Lagrangian trajectories. The comparison shows that the E3SM simulation applying horizontal wind nudging performs well in reproducing thermodynamic variables of the MBL and evolution trends of cloud variables along the trajectories. However, substantial overestimations of aerosol and cloud drop number (N d ) are observed, which is explained as an issue with version 2 of the model. Cloud fraction (CF) does decrease from the Californian coast to Hawaii in the E3SM simulation, but most CF values indicate either an overcast or almost clear sky, which differs from satellite and reanalysis data. The effect of N d overestimation on CF evolution is assessed via prescribed-N d simulations. Those simulations with N d modifications show negligible CF changes. A comparison of estimated inversion strength (EIS) also shows that the simulated EIS values are similar to those of reanalysis data. Our study suggests that cloud macrophysics and boundary layer processes are more important in improving the simulation to capture the SCT than refining the model's thermodynamics or cloud microphysics.

Choi, Kyoung Ock [Univ. of Washington, Seattle, WA↗
DOE OSTI2025

Variability of Eastern North Atlantic Summertime Marine Boundary Layer Clouds and Aerosols Across Different Synoptic Regimes Identified With Multiple Conditions

Abstract This study estimates the meteorological covariations of aerosol and marine boundary layer (MBL) cloud properties in the eastern North Atlantic (ENA) region, characterized by diverse synoptic conditions. Using a deep‐learning‐based clustering model with mid‐level and surface daily meteorological data, we identify seven distinct synoptic regimes during the summer from 2016 to 2021. Our analysis, incorporating reanalysis data and satellite retrievals, shows that surface aerosols and MBL clouds exhibit clear regime‐dependent characteristics, whereas lower tropospheric aerosols do not. This discrepancy likely arises from synoptic regimes determined by daily large‐scale conditions, which may overlook air mass histories that predominantly dictate lower tropospheric aerosol conditions. Focusing on three regimes dominated by northerly winds, we analyze the Atmospheric Radiation Measurement Program (ARM) ENA observations on Graciosa Island in the Azores. In the subtropical anticyclone regime, fewer cumulus clouds and more single‐layer stratocumulus clouds with light drizzle are observed, along with the highest cloud droplet number concentration (Nd), surface cloud condensation nuclei (CCN) and surface aerosol levels. The post‐trough regime features more broken or multi‐layer stratocumulus clouds with slightly higher surface rain rate, and lower Nd and surface CCN levels. The weak trough regime is characterized by the deepest MBL clouds, primarily cumulus and broken stratocumulus clouds, with the strongest surface rain rate and the lowest Nd, surface CCN and surface aerosol levels, indicating strong wet scavenging. These findings highlight the importance of considering the covariation of cloud and aerosol properties driven by large‐scale regimes when assessing aerosol indirect effects using observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluation of Model Summertime Boundary Layer Cloud Development over Complex Terrain in New York State

Weather forecasting over complex terrain with diverse land cover is challenging. Utilizing the high-resolution observations from New York State Mesonet (NYSM), we are able to evaluate the surface processes of the Weather Research Forecast (WRF) Model in a detailed, scale-dependent manner. Here, in the study, possible impacts of land–atmosphere interaction on surface meteorology and boundary layer cloud development are investigated with different model resolutions, land surface models (LSMs), and planetary boundary layer (PBL) physical parameterizations. The High-Resolution Rapid Refresh, version 3 (HRRR), forecasting model is used as a reference for the sensitivity evaluation. Results show that over complex terrain, the high-resolution simulations (1 km × 60 vertical levels) generally perform better compared to low-resolution (3 km × 50 levels) in both surface meteorology and cloud fields. LSMs play a more important role in surface meteorology compared to PBL schemes. The NoahMP land surface model exhibits daytime warmer and drier biases compared to the Rapid Update Cycle (RUC) due to better prediction of the Bowen ratio in RUC. The PBL schemes would affect the convective strength in the boundary layer. The Shin–Hong (SH) scale-aware scheme tends to produce the strongest convective strength in the PBL, while the ACM2 PBL scheme rarely resolved convection even at 1-km resolution. By considering the radiation effect of subgrid-scale (SGS) clouds, the Mellor–Yamada–Nakanishi–Niino eddy diffusivity mass flux (MYNN-EDMF) predicted the highest cloud coverage and lowest surface solar radiation bias. The configuration of SGS clouds in MYNN-EDMF would not only significantly reduce shortwave radiation bias, but also affect the convection behaviors through land surface–cloud–radiation interaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Deep-learning-driven simulations of boundary layer clouds over the Southern Great Plains

Abstract. Based on long-term observations at the Southern Great Plains site by the Atmospheric Radiation Measurement (ARM) program for training and validation, a deep-learning model is developed to simulate the daytime evolution of boundary layer clouds (BLCs) from the perspective of land–atmosphere coupling. The model takes ARM measurements (including early-morning soundings and diurnally varying surface meteorological conditions and heat fluxes) as inputs and predicts hourly estimates (including cloud occurrence, the positions of cloud boundaries, and the vertical profile of the cloud fraction) as outputs. The deep-learning model offers good agreement with the observed cloud fields, especially in the accuracy with which cloud occurrence and base height are reproduced. When the inputs are substituted by reanalysis data from ERA5 and MERRA-2, the outputs of the deep-learning model provide a better agreement with observation than the cloud fields extracted from ERA5 and MERRA-2 themselves. Thus, the deep-learning model shows great potential to serve as a diagnostic tool for the performance of physics-based models in simulating stratiform and cumulus clouds. By quantifying biases in clouds and attributing them to the simulated atmospheric state variables versus the model-parameterized cloud processes, this observation-based deep-learning model may offer insights into the directions needed to improve the simulation of BLCs in physics-based models for weather forecasting and climate prediction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An Investigation on the Spatial Dependence of Autoconversion and Accretion in Eastern North Atlantic Boundary Layer Clouds (Final Report)

In many climate models, small clouds over the ocean rain too often and too lightly. This affects the amount of water in the clouds and ultimately the area covered by clouds both of which must be predicted by climate models. This in turn impacts how much sunlight these clouds can reflect to space and ultimately has a significant impact on the Earth radiation balance and climate. The purpose of this project was to use cloud and precipitation data being collected by DOE to evaluate the spatial variability of boundary layer clouds and precipitation, and the relationships between them with a view towards improving the representation of the physics that control the generation of precipitation in models.

58 GEOSCIENCES↗
NASA NTRS1993

A regional simulation of marine boundary-layer clouds

A regional version of a two-layer model is used to simulate marine boundary-layer clouds over an area (20 deg - 42 deg and 117 - 145 deg W) of the eastern North Pacific. The large-scale conditions requried for the model are provided by European Centre for Medium-Range Weather Forecasts analyses and the Comprehensive Ocean-Atmosphere Data Set. The simulated cloud-top height and fractional cloudiness are compared with satellite data. The model predicts a realistic pattern of cloud-top height, although the heights appear to be overestimated in the southwest and underestimated along the eastern border of the domain. The overall simulated cloudiness is qualitatively comparable to the satellite derived, but the model predicts excessive cloudiness over cold ocean surfaces and insufficient cloudiness over an area centered at 30 deg N, 130 deg W. The possible causes for these discrepancies are discussed. Budget studies show that horizontal advection contributes substantially to the cloud-top height and cloud-layer moisture budgets. Thus, one may need to consider the effects of horizontal advection when validating steady-state solutions of a one-dimensional model. The simulated cloudiness is shown to be sensitive to large-scale subsidence, moisture above the clouds, and drizzle. An increase in the large-scale divergence by 2 x 10(exp -6)/sec decreases average cloudiness for the area by 30%. An increase in the moisture at 850 mb by 2 g/kg increases the cloudiness by 20%. The suppression of drizzle in the model increases the cloudiness by 34% and significantly changes its pattern.

Wang, Shouping↗
DOE OSTI2024

Aitken Mode Aerosols Buffer Decoupled Mid‐Latitude Boundary Layer Clouds Against Precipitation Depletion

Aerosol-cloud-precipitation interactions are a leading source of uncertainty in estimating climate sensitivity. Remote marine boundary layers where accumulation mode (~100–400 nm diameter) aerosol concentrations are relatively low are very susceptible to aerosol changes. These regions also experience heightened Aitken mode aerosol (~10–100 nm) concentrations associated with ocean biology. Aitken aerosols may significantly influence cloud properties and evolution by replenishing cloud condensation nuclei and droplet number lost through precipitation (i.e., Aitken buffering). We use a large-eddy simulation with an Aitken-mode enabled microphysics scheme to examine the role of Aitken buffering in a mid-latitude decoupled boundary layer cloud regime observed on 15 July 2017 during the Aerosol and Cloud Experiments in the Eastern North Atlantic flight campaign: cumulus rising into stratocumulus under elevated Aitken concentrations (~100–200 mg -1 ). In situ measurements are used to constrain and evaluate this case study. Our simulation accurately captures observed aerosol-cloud-precipitation interactions and reveals time-evolving processes driving regime development and evolution. Aitken activation into the accumulation mode in the cumulus layer provides a reservoir for turbulence and convection to carry accumulation aerosols into the drizzling stratocumulus layer above. Further Aitken activation occurs aloft in the stratocumulus layer. Together, these activation events buffer this cloud regime against precipitation removal, reducing cloud break-up and associated increases in heterogeneity. We examine cloud evolution sensitivity to initial aerosol conditions. With halved accumulation number, Aitken aerosols restore accumulation concentrations, maintain droplet number similar to original values, and prevent cloud break-up. Without Aitken aerosols, precipitation-driven cloud break-up occurs rapidly. In this regime, Aitken buffering sustains brighter, more homogeneous clouds for longer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Understanding the causes of satellite–model discrepancies in aerosol–cloud interactions using near-LES simulations of marine boundary layer clouds

Aerosol–cloud interactions (ACI) remain the largest source of uncertainty in model estimates of anthropogenic radiative forcing, primarily because of deficiencies in representing aerosol–cloud microphysical processes that lead to inconsistent cloud liquid water path (LWP) responses to aerosol perturbations between observations and models. To investigate this discrepancy, we conducted a series of large-eddy-scale simulations driven by realistic meteorology over the eastern North Atlantic, and evaluated LWP susceptibility, precipitation processes, and boundary layer thermodynamics using satellite and ground-based observations. Simulated LWP responses show a strong dependence on cloud state. Non-precipitating thin clouds exhibit a modest LWP decrease with increasing cloud droplet number concentration (N d ), consistent in sign but weaker in magnitude than satellite estimates, reflecting enhanced turbulent mixing and evaporation. The largest model-observation discrepancy occurs in non-precipitating thick clouds, where simulated LWP susceptibilities are strongly positive (+0.32) while observations indicate large negative values (−0.69). This discrepancy stems from excessive precipitation driven by underestimated entrainment, overly active accretion, and overly broad drop-size distributions in polluted conditions. While our high-resolution setup mitigates the excessive drizzling common in coarser models and captures key regime transitions, these biases persist – highlighting that improved parameterizations of cloud-top processes, precipitation, and aerosol effects are needed beyond simply increasing model resolution. Additionally, misrepresented moisture inversions in reanalysis introduce a moist bias in cloud-top relative humidity, further amplifying positive LWP susceptibility. Our results also suggest that large negative N d –LWP relationships in observations may reflect internal cloud processes rather than true ACI effects.

Aerosol-cloud interaction↗
DOE OSTI2024

Processes Associated with Boundary Layer Cloud Ice Phase Precipitation in the High Southern Latitudes (Final Technical Report)

This is a final technical report for DOE Award No. DE-SC0018995. Using data collected during the MARCUS deployment of the 2nd ARM mobile facility, this project sought to address the following scientific questions: 1. What are the conditions that govern phase partitioning in supercooled boundary layer clouds over the high latitude Southern Oceans? 2. To what extent are supercooled mixed phase clouds responsible for the high cloud fractions over the Southern Ocean and do these mixed phase clouds contribute to the model biases in absorbed shortwave radiation? 3. Can the cloud properties and phase partitioning over the Southern Ocean be linked to the underlying aerosol environment? 4. How do the aerosol properties at the surface vary spatially and seasonally over the high latitude Southern Ocean and what processes control these features? 5. How well defined are the atmospheric compositional boundaries between Southern Ocean marine, Antarctic free tropospheric, and Antarctic surface airmasses, and how does this influence the chemistry and physics of the Southern Ocean atmosphere? In this project we published three peer review journal articles that address these questions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Boundary-Layer Cloud Modeling Challenges on the North Slope of Alaska

The accurate modeling and prediction of cloud base heights is critical for energy balance calculations and aviation operations, alike. Low-level (i.e., boundary-layer) Arctic clouds can be difficult to model, making prediction of formation and dissipation challenging. Primarily mixed-phase, these clouds typically contain low quantities of supercooled liquid water and often slowly precipitate relatively small amounts of moderately and heavily rimed snow particles. While this appears to be the predominant cloudy state on the North Slope of Alaska (NSA), the delicate balance of microphysical, dynamical, radiative, surface coupling, and advective processes can rapidly shift to heavy snow (with various degrees of riming) or to a complete dissipation of the cloud layer without any precipitation, depending on the dominant processes. Here we strive to disentangle these various processes. First, we compare the predictive performances of four different numerical weather models in forecasting the presence and base-heights of low-level clouds: the High-Resolution Rapid Refresh - Alaska (HRRR-AK) model, the Polar Weather Research and Forecasting (Polar WRF) model, the Unified Model (UM), and the European Centre for Medium-range Weather Forecasting (ECMWF) model. Initial results comparing model output at two U.S. Department of Energy Atmospheric Radiation Measurement (AMT) NSA sites, during the fall season in 2019 and 2022, show that the UM slightly outperforms the HRRR-AK in terms of accurately forecasting the presence of a low-level cloud layer (89% of the time). All models have a significant bias of 300 to 800 meters in forecasting cloud base height (lower than is observed); however, the UM and ECMWF models have the lowest biases. Finally, a case study for a particularly challenging April 2017 thin-cloud event is presented, wherein we compare the performance of four different bulk microphysical parameterization schemes using a higher-resolution large eddy simulation (LES) model, the WRF-LES. Initial results show that the Thompson scheme was the only one able to reproduce and sustain a substantial supercooled liquid layer, but it was unable to reproduce the transition from a deep, liquid-rich cloud to a thin layer with moderately and heavily rimed precipitation. This is the first step in linking simulated LES-scale riming processes with those parameterized at a coarser mesoscale model scale. This has important implications for forecasting low-level clouds in an operational environment, given the efficiency of the riming process.

cloud base heights↗
NASA NTRS1993

Modeling marine boundary-layer clouds with a two-layer model: A one-dimensional simulation

A two-layer model of the marine boundary layer is described. The model is used to simulate both stratocumulus and shallow cumulus clouds in downstream simulations. Over cold sea surfaces, the model predicts a relatively uniform structure in the boundary layer with 90%-100% cloud fraction. Over warm sea surfaces, the model predicts a relatively strong decoupled and conditionally unstable structure with a cloud fraction between 30% and 60%. A strong large-scale divergence considerably limits the height of the boundary layer and decreases relative humidity in the upper part of the cloud layer; thus, a low cloud fraction results. The efffects of drizzle on the boundary-layer structure and cloud fraction are also studied with downstream simulations. It is found that drizzle dries and stabilizes the cloud layer and tends to decouple the cloud from the subcloud layer. Consequently, solid stratocumulus clouds may break up and the cloud fraction may decrease because of drizzle.

Wang, Shouping↗