Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bandstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

2D Quantum Transport Modeling in Nanoscale MOSFETs

We have developed physical approximations and computer code capable of realistically simulating 2-D nanoscale transistors, using the non-equilibrium Green's function (NEGF) method. This is the most accurate full quantum model yet applied to 2-D device simulation. Open boundary conditions, oxide tunneling and phase-breaking scattering are treated on an equal footing. Electron bandstructure is treated within the anisotropic effective mass approximation. We present the results of our simulations of MIT 25 and 90 nm "well-tempered" MOSFETs and compare them to those of classical and quantum corrected models. The important feature of quantum model is smaller slope of Id-Vg curve and consequently higher threshold voltage. These results are consistent with 1D Schroedinger-Poisson calculations. The effect of gate length on gate-oxide leakage and subthreshold current has been studied. The shorter gate length device has an order of magnitude smaller leakage current than the longer gate length device without a significant trade-off in on-current.

Svizhenko, Alexei↗
NASA NTRS2002

Effects of Structural Deformation and Tube Chirality on Electronic Conductance of Carbon Nanotubes

A combination of large scale classical force-field (UFF), density functional theory (DFT), and tight-binding Green's function transport calculations is used to study the electronic properties of carbon nanotubes under the twist, bending, and atomic force microscope (AFM)-tip deformation. We found that in agreement with experiment a significant change in electronic conductance can be induced by AFM-tip deformation of metallic zigzag tubes and by twist deformation of armchair tubes. The effect is explained in terms of bandstructure change under deformation.

Svizhenko, Alexei↗
NASA NTRS1998

Modeling and Simulation of Semiconductor Quantum Well Structures and Lasers

In this talk I will cover two aspects of modeling and simulation efforts at NASA Ames Research Center. In the quantum well structure simulation, we typically start from the quantum mechanical calculation of the quantum well structures for the confined/and unconfined eigen states and functions. A bandstructure calculation of the k*p type is then performed for the confined valence states. This information is then used to computer the optical gain and refractive index of the quantum well structures by solving the linearized multiband semiconductor Bloch equations with the many-body interactions included. In our laser simulation, we typically solve the envelope equations for the laser field in space-time domain, coupled with a reduced set of material equations using the microscopic calculation of the first step. Finally I will show some examples of both aspects of simulation and modeling.

Ning, Cun-Zheng↗
NASA NTRS2003

Microscopic Modeling of Intersubband Resonances in InAs/AlSb Quantum Wells

Linear absorption spectra from intersubband resonance in InAs/AlSb quantum wells are analyzed theoretically using the intersubband semiconductor Bloch equation approach. Our model goes beyond the Hartree-Fock approximation and treats particle-particle correlations under the second Born approximation. Electron-electron and -LO phonon scatterings from such a treatment describe intrinsic line broadening to the intersubband resonance. Electron subbands are determined self-consistently with a spurious-state-free 8-band k.p Hamiltonian under the envelope function approximation. To compare with experimental measurements, we also included line broadening due to electron-interface roughness scattering. Excellent agreement was achieved for temperature-dependent absorption spectra in the mid-infrared frequency range, after taking into careful account the interplay of material parameters, nonparabolicity in bandstructure, and many-body effects.

Li, Jian-Zhong↗
NASA NTRS2003

Many-Body Effects in Quantum-Well Intersubband Transitions

Intersubband polarization couples to collective excitations of the interacting electron gas confined in a semiconductor quantum well (Qw) structure. Such excitations include correlated pair excitations (repellons) and intersubband plasmons (ISPs). The oscillator strength of intersubband transitions (ISBTs) strongly varies with QW parameters and electron density because of this coupling. We have developed a set of kinetic equations, termed the intersubband semiconductor Bloch equations (ISBEs), from density matrix theory with the Hartree-Fock approximation, that enables a consistent description of these many-body effects. Using the ISBEs for a two-conduction-subband model, various many-body effects in intersubband transitions are studied in this work. We find interesting spectral changes of intersubband absorption coefficient due to interplay of the Fermi-edge singularity, subband renormalization, intersubband plasmon oscillation, and nonparabolicity of bandstructure. Our results uncover a new perspective for ISBTs and indicate the necessity of proper many-body theoretical treatment in order for modeling and prediction of ISBT line shape.

Li, Jian-Zhong↗
NASA NTRS1999

Si Tight-Binding Parameters from Genetic Algorithm Fitting

Quantum mechanical simulations of carrier transport in Si require an accurate model of the complicated Si bandstructure. Tight-binding models are an attractive method of choice since they bear the full electronic structure symmetry in them and they can discretize a realistic device on an atomic scale.

genetic algorithm Tight-Binding Parameters↗
DOE OSTI2019

PyProcar: A Python library for electronic structure pre/post-processing

The PyProcar Python package plots the band structure and the Fermi surface as a function of site and/or s,p,d,f - projected wavefunctions obtained for each k-point in the Brillouin zone and band in an electronic structure calculation. This can be performed on top of any electronic structure code, as long as the band and projection information is written in the PROCAR format, as done by the VASP and ABINIT codes. PyProcar can be easily modified to read other formats as well. This package is particularly suitable for understanding atomic effects into the band structure, Fermi surface, spin texture, etc. PyProcar can be conveniently used in a command line mode, where each one of the parameters define a plot property. In the case of Fermi surfaces, the package is able to plot the surface with colors depending on other properties such as the electron velocity or spin projection. Furthermore, the mesh used to calculate the property does not need to be the same as the one used to obtain the Fermi surface. A file with a specific property evaluated for each k-point in a k-mesh and for each band can be used to project other properties such as electron–phonon mean path, Fermi velocity, electron effective mass, etc. Another existing feature refers to the band unfolding of supercell calculations into predefined unit cells.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Mapping the composition-dependence of the energy bandgap of GaAsNBi alloys

We have examined the alloy composition dependence of the energy bandgap and electronic states in GaAsNBi alloys. Using direct measurements of N and Bi mole fractions, via ion beam analysis, in conjunction with direct measurements of the out-of-plane misfit via x-ray rocking curves, we determine the “magic ratio” for lattice-matching of GaAsNBi alloys with GaAs substrates. Additionally, using a combination of photoreflectance and photoluminescence spectroscopy, we map the composition- and misfit-dependence of the energy bandgaps, along with revealing the energetic position of Bi-related states at approximately 0.18 eV above the valence band maximum.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Quantum transport properties of monolayer graphene with antidot lattice

Quantum transport properties in monolayer graphene are sensitive to structural modifications. In this work we find that the introduction of a hexagonal lattice of antidots has a wide impact on weak localization and Shubnikov-de Haas (SdH) oscillation of graphene. The antidot lattice reduces both phase coherence and intervalley scattering length. Remarkably, even with softened intervalley scattering, i.e., the phase-breaking time is shorter than intervalley scattering time, coherence between time reversed states remains adequate to retain weak localization, an offbeat and rarely reported occurrence. Whereas SdH oscillation is boosted by the antidot lattice, the amplitude of the SdH signal rises rapidly with the increasing antidot radius. But both effective mass and carrier density are reduced in a larger antidot lattice. A bandgap of ~10 meV is opened. The antidot lattice is an effective dopant-free way to manipulate electronic properties in graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

First-principles study of bandgap bowing in BGaN alloys

III-nitride alloys continue to drive advances in electronic and optoelectronic devices. Recently, boron-containing nitride alloys have been explored with the goal of expanding the range of applications. Using first-principles calculations with a hybrid functional, we study the electronic structure of wurtzite BGaN alloys. Strong bandgap bowing is observed, with a concentration-dependent bowing parameter. Due to the strong bandgap bowing, the fundamental bandgap in strain-free alloys is effectively unchanged for the lowest B concentrations. A crossover from a direct to an indirect bandgap occurs for B concentrations greater than 50%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Ultra-wide-bandgap AlGaN homojunction tunnel diodes with negative differential resistance

The power efficiencies of state-of-the-art Al x Ga 1-x N deep-ultraviolet (UV) emitters operating in the <300 nm wavelength region are currently limited to a few percent in part due to limitations in the series and contact resistance which result in excessive drive voltages. Al x Ga 1-x N tunnel contacts and tunnel junctions in deep-UV devices are a promising route toward increasing these efficiencies by improving the contact resistances, hole injection, and reducing optical absorption by removing undesirable p-GaN contact layers. However, due to doping inefficiencies, standalone tunnel diodes have not been realized in the form of homojunction Al x Ga 1-x N. In this work, Al x Ga 1-x N (0.19 ≤ x ≤ 0.58) homojunction tunnel diodes are fabricated with high reverse bias current densities, and one device with x = 0.19 demonstrates a negative differential resistance at ~2.4 V. Al x Ga 1-x N p++/n++/n tunnel diodes are compared to reference p++/i/n diodes to provide clarity about the role of tunneling conduction vs leakage conduction. Transmission electron microscopy verifies that heavy doping does not result in visible defects such as Mg precipitates and allows for subsequent epitaxy, critical for buried tunnel junction structures. Increasing the bandgap energy of Al x Ga 1-x N for higher Al content tunnel junctions decreases the tunnel current, but still allows sufficient conduction necessary for future improvements in deep UV emitter efficiencies.

Nitrides↗
DOE OSTI2019

Characterization and analysis of FA x Cs (1- x ) Pb(I y Br (1- y ) ) 3 perovskite solar cells with thickness controlled transport layers for performance optimization

Strong characterization methods are needed to fully comprehend the chemistry and composition of perovskite solar cells. Understanding the interaction between layers inside a cell and how they react with the environment is important to achieve optimum manufacturing processes, and improve efficiency of perovskite solar cells. Here, we probe a hybrid organic-inorganic perovskite cell structure formed by a fluorine-doped tin oxide (FTO), cassiterite (SnO 2 ), mixed halide perovskite, Spiro-OMeTAD and silver layers. We have demonstrated a power conversion efficiency (PCE) greater than 19% and aV oc of more than 1.1 V for a wide-band gap (1.6 eV) perovskite solar cell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Evidence for trap-assisted Auger recombination in MBE grown InGaN quantum wells by electron emission spectroscopy

We report on the direct measurement of hot electrons generated in the active region of blue light-emitting diodes grown by ammonia molecular beam epitaxy by electron emission spectroscopy. The external quantum efficiency of these devices is <1% and does not droop; thus, the efficiency losses from the intrinsic, interband, electron-electron-hole, or electron-hole-hole Auger should not be a significant source of hot carriers. Here, the detection of hot electrons in this case suggests that an alternate hot electron generating process is occurring within these devices, likely a trap-assisted Auger recombination process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Assessing the roles of Cu- and Ag-deficient layers in chalcopyrite-based solar cells through first principles calculations

Chalcopyrites are a demonstrated material platform for realizing efficient thin-film photovoltaics, with the most well known Cu(In,Ga)Se 2 (CIGS)-based solar cells exceeding 23%. Several factors, including flexibility in tuning the absorber bandgap, enhanced surface treatments, and the electrically benign nature of common defects are responsible for the existing high performance and future promise in chalcopyrite-based photovoltaic devices. The introduction of Cu-poor phases (also known as ordered-vacancy compounds or OVCs) between the absorber and buffer layers in CIGS solar cells is known to enhance device performance; however, the overall properties and role of OVCs remain poorly understood. Using first principles calculations based on the density functional theory with screened hybrid functionals, here we explore the electronic structure and stability of OVCs and their band offsets with defect-free chalcopyrite layers in Cu- and Ag-based compounds (ABX 2 where A=Cu, Ag; B=In, Ga, Al; and X=S, Se). Using AB 3 X 5 and AB 5 X 8 stoichiometries as model OVC systems, we report on the variation of the bandgap with the A/B ratio and discuss the trends in other Cu- and Ag-based chalcopyrites beyond CuInSe 2 . We find that the valence and conduction bands are lower in energy in OVCs with respect to the parent ABX 2 chalcopyrite owing to a reduced p–d interaction between X and A atoms. We additionally perform device-level simulations to assess the implications of the results, finding that the valence band offsets of OVCs are favorable, while the conduction band offsets of chalcopyrites beyond CuInSe 2 -based absorbers may be detrimental in conventional solar cell device designs.

14 SOLAR ENERGY↗
DOE OSTI2020

Prospects for n -type doping of (Al x Ga 1– x ) 2 O 3 alloys

Here we systematically explore the properties of group-IV (C, Si, Ge, and Sn) and transition metal (Hf, Zr, and Ta) dopants substituting on the cation site in (Al x Ga 1– x ) 2 O 3 (AlGO) alloys using first-principles calculations with a hybrid functional. In Ga 2 O 3 , each of these dopants acts as a shallow donor. In Al 2 O 3 , they are deep defects characterized by the formation of either DX centers or positive- U (+/0) levels. Combining our calculations of dopant charge-state transition levels with information of the AlGO alloy band structure, we estimate the critical Al composition at which each dopant transitions from being a shallow to a deep donor. We identify Si to be the most efficient dopant to achieve n -type conductivity in high Al-content AlGO alloys, acting as a shallow donor over the entire predicted stability range for AlGO solid solution alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The magnetic, electronic, and light-induced topological properties in two-dimensional hexagonal FeX 2 (X = Cl, Br, I) monolayers

Using Floquet–Bloch theory, we propose to realize chiral topological phases in two-dimensional (2D) hexagonal FeX 2 (X = Cl, Br, I) monolayers under irradiation of circularly polarized light. Such 2D FeX 2 monolayers are predicted to be dynamically stable and exhibit both ferromagnetic and semiconducting properties. To capture the full topological physics of the magnetic semiconductor under periodic driving, we adopt ab initio Wannier-based tight-binding methods for the Floquet–Bloch bands, with the light-induced bandgap closings and openings being obtained as the light field strength increases. The calculations of slabs with open boundaries show the existence of chiral edge states. Interestingly, the topological transitions with branches of chiral edge states changing from zero to one and from one to two by tuning the light amplitude are obtained, showing that the topological Floquet phase of high Chern number can be induced in the present Floquet–Bloch systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Light induced electron spin resonance properties of van der Waals CrX 3 (X = Cl, I) crystals

The research on layered van der Waals (vdW) magnets is rapidly progressing owing to exciting fundamental science and potential applications. In bulk crystal form, CrCl 3 is a vdW antiferromagnet with in-plane ferromagnetic ordering below 17 K, and CrI 3 is a vdW ferromagnet below 61 K. In this paper, we report on the electron spin resonance (ESR) properties of CrCl 3 and CrI 3 single crystals upon photo-excitation in the visible range. We noticed remarkable changes in the ESR spectra upon illumination. In the case of CrCl 3 , at 10 K, the ESR signal is shifted from g = 1.492 (dark) to 1.661 (light), the linewidth increased from 376 to 506 Oe, and the signal intensity is reduced by 1.5 times. Most interestingly, the observed change in the signal intensity is reversible when the light is cycled on/off. We observed almost no change in the ESR spectral parameters in the paramagnetic phase (>20 K) upon illumination. Upon photo-excitation of CrI 3 , the ESR signal intensity is reduced by 1.9 times; the g-value increased from 1.956 to 1.990; the linewidth increased from 1170 to 1260 Oe at 60 K. These findings are discussed by taking into account the skin depth, the slow relaxation mechanism, and the appearance of low-symmetry fields at the photo-generated Cr 2+ Jahn–Teller centers. Such an increase in the g-value as a result of photo-generated Cr 2+ ions is further supported by our many-body wavefunction calculations. This work has the potential to extend to monolayer vdWs magnets by combining ESR spectroscopy with optical excitation and detection.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A comprehensive ARPES study on the type-II Dirac semimetal candidate Ir 1-x Pt x Te 2

The transition metal dichalcogenide Ir 1-x Pt x Te 2 displays both superconductivity and a topological band structure. Using angle-resolved photoemission spectroscopy, we obtain a comprehensive understanding of the three-dimensional electronic structure in the normal state of Ir 1-x Pt x Te 2 for doping levels from x = 0.1 to 0.4, which spans the composition range of a superconducting state to a non-superconducting state. Many features of the electronic structure can be attributed to strong Te–Te interactions between the layers of the layered crystal structure and can be resolved by photon energy dependent measurements. We demonstrate that the type-II Dirac fermions can be successfully tuned via Pt doping, where the Dirac point lies close to the Fermi level for x = 0.1. The band evolution vs doping provides a clearer understanding of the relationship between the superconductivity and electronic structure. In addition, the β band in the superconducting samples locates the system close to a type-II van Hove singularity, where spin triplet paring symmetry has been predicted. Our results provide a comprehensive understanding of the band structure of Ir 1-x Pt x Te 2 , and we discuss the possibilities of the existence of topological superconductivity in this system.

36 MATERIALS SCIENCE↗