SEARCH · Engineering Papers

Results for “ball”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2024

HSQC spectra of lignin isolated from poplar stems

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from stems of genetically engineered poplar through auxin signaling gene modification. The plants were grown in greenhouse with temperatures between 21 and 23 °C. Plants were harvested and the aboveground stems were cut off an approximately five-inch-long segment from the bottom end of the plant stem, debarked and air-dried for three weeks. The dried stem samples were Wiley milled (mesh size 20), Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extracted biomass was ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was freeze-dried to recover the lignin. The dry stem lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and transferred into a 5 mm tube. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 230 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 2048 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin 3.6 software. Additional meta data is embedded in the raw spectra figures.

HSQC, lignin, poplar, stems, CBI↗

DOE OSTI2024

HSQC spectra of lignin isolated from poplar roots

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from roots of a greenhouse grown natural population of an energy crop poplar (Populus trichocarpa). Dormant cuttings of field-grown poplar were grown in 6-liter pots in a peat-based media containing bark, perlite, vermiculite, dolomite lime and a wetting agent in an environmentally controlled greenhouse. Temperatures were between 21 and 23 °C, with supplemental lighting to support a 16-h day length using 1000-watt high-pressure sodium lights in greenhouse. Once established, all plants were cut-back, allowed to regrow and harvested at the same time following an eight-month long growth period. Plants were harvested and the belowground roots were washed off soils, blotted, dried in an oven at 70 °C for 3 days, and Wiley milled (mesh size 20). The roots were Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extracted roots were ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was extracted twice with 96% (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and transferred into a 5 mm tube. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 220 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin software. Additional meta data is embedded in the raw spectra figures.

HSQC, lignin, poplar, roots, CBI↗

DOE OSTI2024

Heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from switchgrass residues after fermentation with milling

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a herbaceous energy crop (Panicum virgatum L.). The lowland variant “Timber” switchgrass from Ernst seeds was used. The switchgrass was knife milled and passed through a 2 mm sieve prior to consolidated bioprocessing (CBP) process. Switchgrass was suspended in Milli-Q water and autoclaved for 90 min on liquid cycles. The residues after autoclaving were then subjected to CBP using coculture of Clostridium thermocellum (C. thermocellum DSM 1313 (LL1004)) and Thermoanaerobacterium thermosaccarolyticum ( T. thermosaccharolyticum HG-8 ATCC 31960 (LL1244)). Once-fermented and twice-fermented (FF) switchgrass were subjected to ball and disc milling in bioreactors at 55 °C and 60, 48 grams/L solids loadings for primary and secondary fermentation respectively. When fermentations were completed, the residual solids were rinsed with milli-Q water. Lignin was isolated from the pretreated residues after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 600 rpm for 2 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and characterized using 13C–1H HSQC in a Bruker Avance III HD 500-MHz NMR spectrometer. A standard Bruker pulse sequence (hsqcetgpsisp.2) was used on a Prodigy platform cryoprobe. The spectra were acquired with the following acquisition conditions: 230 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 2048 data points, a 90° pulse, with a C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin 3.6 software.

Lignin, HSQC, Switchgrass, CBP , Ball mill, Disc m↗

DOE OSTI2025

Reducing waste of the hydride-dehydride process for U-6 wt% Nb spherical powders through lower impact and targeted milling

The breakdown of solid metal into powder during the hydride-dehydride process is commercially important for the formation of titanium and other metal powders. Typically, the milling of the brittle hydride powder occurs in a ball mill, where milling media impacts powder particles to break them down. The milling media can impact particles that are larger than desired, as desired, or smaller than desired, indiscriminately making all particles smaller. In this work, we investigate how to minimize waste powder production during milling using two different milling methods, planetary ball milling and milling in a sieve shaker (sieve-milling). Both processes yielded similar amounts of 20–75 μm diameter powder (the target size range); however, sieve-milling generated a significantly smaller amount of undersized waste powder. The powders were characterized by X-ray diffraction, SEM/STEM, and magnetic susceptibility. Several differences between ball milling and sieve-milling processes are discussed. We then conclude that the decreased yield of undersized powder in sieve-milling was due to a combination of lower impact energy in sieve-milling, unreacted metallic cores in the hydride flakes, and the ability to mill target particle sizes during sieve-milling. While these results are from the milling of brittle hydride powder, similar methods may be applicable to other brittle powders, including ceramics or salts.

Chemistry↗

DOE OSTI2025

Tribological behavior of spark plasma sintered Ti 3 SiC 2 MAX phase composites

Ti₃SiC₂ MAX phases are considered promising candidates for tribological applications; but, their low hardness (5-6 GPa) can lead to increased abrasive wear and higher wear rates. This study investigates the effect of incorporating hard SiC particles on microstructure, mechanical, and tribological behavior of Ti₃SiC₂-SiC-based MAX phase composites prepared using spark plasma sintering at 1400 °C, 40 MPa, 15-minute holding time. Phase and microstructural characterization of composites confirmed the formation of Ti₃SiC₂ MAX phase (90%) along with TiC as a minor phase (10%). For Ti₃SiC₂-SiC, homogeneous distribution of SiC grains within Ti₃SiC₂ matrix resulted in increased hardness from ~11.6 GPa to ~14.8 GPa; however, the flexural strength decreased from ~615 MPa to ~597 MPa due to coefficient of thermal expansion mismatch. Tribological behavior of Ti₃SiC₂-SiC MAX phase composites was assessed using unidirectional sliding ball-on-flat tests with a 52100 steel ball at different loads and a constant speed of 0.05 m/s. SiC reinforced composites exhibited a decreased friction coefficient from 0.39 to 0.29 and wear rates comparable to Ti₃SiC₂ (7-10×10⁻³ mm³/N·m). SEM and EDS analysis of the worn surfaces indicated material transfer from the steel ball counter body and its oxidation due to frictional heating, at lower loads (2N and 5N), whereas at higher load (10N), fracture of the transfer layer dominated, with the presence of microcracks, delamination, grain pull-outs, and wear debris. Improved mechanical properties and good adhesion of SiC with Ti₃SiC₂ matrix resulted in reduced microcracks and grain pull-outs, making Ti₃SiC₂-SiC/Steel tribo-pair more suitable for tribological applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Fabrication, oxidation, and combustion of nanoscale magnesium diboride and tetraboride

The difficult ignition of boron decreases the combustion efficiency of boron-loaded, fuel-rich propellants. One approach to solving this problem involves the use of magnesium diboride (MgB2), which ignites easier than boron. Magnesium tetraboride (MgB4) offers greater energy density owing to its higher boron content. However, the effect of B/Mg ratio on the ignition and combustion is unknown. Additionally, while nanoscale MgB₂ particles and quasi-2D structures were recently recognized as promising energetic additives, the oxidation and combustion properties of nanoscale MgB₄ have not been explored. The objectives of the present work included synthesis, purification, and high-energy ball milling of MgB2 and MgB4 powders as well as investigation of their thermal decomposition, oxidation, and combustion. The MgB2 and MgB4 powders were fabricated by combustion synthesis in the chemical oven mode and by heating Mg/B mixtures in a tube furnace. The latter method was superior in the synthesis of MgB4. Oxide impurities in the synthesized powders were removed by acid leaching. Nanoscale powders were obtained by high-energy ball milling. Thermal decomposition and oxidation of the obtained MgB₂ and MgB₄ powders were investigated by conducting non-isothermal thermogravimetric analysis (TGA) at temperatures up to 1550 °C in argon and oxygen flows. Combustion of B, MgB₂, and MgB₄ powders with oxygen at atmospheric pressure was studied in a windowed chamber using laser ignition and high-speed video recording. The TGA has shown multi-step decomposition of both magnesium borides in an argon environment. The maximum oxidation rate of MgB4 in oxygen was observed at a much lower temperature than in the case of MgB2. In the combustion experiments, both magnesium borides burned much faster than submicron boron. Ball milling of the borides further increased their burning rates. It has been concluded that nanoscale magnesium tetraboride is a promising ingredient for fuel-rich propellants owing to its high energy density, efficient oxidation, and rapid combustion.

Molina, Andre [The University of Texas at El Paso]↗

DOE OSTI2025

Horn Module Mounting: Kinematic Mount

This research will focus on the kinematic mount that is supporting the horn and horn module in the target hall, LBNF-20, at Fermilab. It will see if the current, ball-in-cup design will be the most optimal for the application as the horn module mount, and the main concerns that were considered were the ball diameter, cup angle, materials, and coating. There were many ways that information was gathered and analyzed such as: hand calculations, a spreadsheet calculator, and various graphs. The results will show if there is an exact cup angle, ball diameter, material, or coating that is the strongest candidate out of all the other options for all of these variables. In the future, a Finite Element Analysis on the cup will provide additional confirmation that the assumptions made in the hand-calculations are correct, and there will be a prototype built to determine if the design can take loads under real conditions.

Malovski, Azra↗

DOE OSTI2025

Effects of carbon substitution on magnetic properties and magnetocaloric effects in Mn 65-x Ga 17 C 18+x compounds

This study involved the tuning of the magnetic, magnetocaloric, and room-temperature structural properties of Mn 65-x Ga 17 C 18+x (0 ≤ x ≤ 4) compounds prepared using a high-energy ball milling (HEBM) technique. This study indicates that the crystal structure of all the compounds can be described as an anti-perovskite cubic structure with the Pm-3m space group and the crystal cell volume decreases with increasing carbon concentration. The system shows a first-order structural phase transition at a temperature T=T M between two cubic phases having different magnetic structures. The phases are characterized by antiferromagnetic (AFM) and ferromagnetic (FM) -like behavior at low (T < T M ) and high (T M > T) temperature regions, respectively. A suppression of the AFM phase was observed with increasing C concentration. The temperature-induced first-order transitions (FOTs) were found to possess a small thermal hysteresis in the magnetization (~2-3 K) in an applied magnetic field of H = 50 kOe. Magnetic entropy changes estimated from isothermal magnetization curves indicate that the largest value of the magnetic entropy change of |ΔS M | = 2.1 J kg -1 K -1 for x = 4 with ΔH = 50 kOe, with a relative cooling power (RCP) of ~190 J kg -1 . Furthermore, high-energy ball milling (HEBM), a scalable technique, has been demonstrated as a viable method to synthesize magnetocaloric materials with substantial RCP values.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Ink Casting and 3D‐Extrusion Printing of Yb 14 MnSb 11 for High‐Temperature Thermoelectric Material

Abstract Complex shapes are created from Yb 14 MnSb 11 , a high‐temperature thermoelectric Zintl phase, via a two‐step process: i) layer‐by‐layer 3D‐extrusion of ink containing partially‐reacted powders which are ball‐milled from a blend of Yb, MnSb, and Sb powders; ii) heat treatment to synthesize the ternary compound Yb 14 MnSb 11 and densify the extruded powders. A high phase purity for Yb 14 MnSb 11 (83–94%) is achieved in both cast and 3D‐extruded ink specimens via a solid‐state reaction between Yb, MnSb, and Yb 4 Sb 3 during reactive sintering. Pressure‐free sintering at temperatures of 1200–1400 °C densifies the powders to 82% relative density but can also induce the decomposition of the Yb 14 MnSb 11 phase due to Yb sublimation. A process window with optimized sintering temperature and time is identified, achieving both low porosity and high phase purity and reaching a maximum zT = 0.61 at 1000 °C, about half of the maximum zT value for bulk Yb 14 MnSb 11 made via conventional processes (pressure sintering of precursor powders). The present approach – direct ink writing of ball‐milled powders, combined with reactive sintering – is a scalable and affordable method to fabricate thermoelectric legs with intricate 3D shapes, for enhanced performances in high‐temperature thermoelectric applications.

Chen, Ming [Department of Materials Science &amp, ↗

DOE OSTI2026

Electrostatic‐Attraction‐Driven Self‐Assembled Graphene‐Disordered Rocksalt Composite Cathode for Lithium‐Ion Batteries

Disordered rocksalt cathodes hold promise for achieving high-capacity lithium-ion batteries while using low-cost, earth-abundant elements. However, their electrochemical performance remains critically limited by their poor electronic conductivity. Conventional strategies such as high-energy ball milling with excess carbon additives can improve conductivity but remain challenging to scale and often produce defects and increase surface area, thereby accelerating capacity degradation. Herein, we report an alternative approach of electrostatic-attraction-driven self-assembly to fabricate Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 (LMTOF) particles uniformly wrapped with electronically conductive graphene sheets without associated materials degradation. The graphene-wrapped LMTOF demonstrates significantly improved cycling stability (89% capacity retention after 100 cycles) and superior rate capability compared with an LMTOF-carbon composite electrode fabricated using the conventional high-energy ball-milling process. Post-cycling analysis reveals reduced oxygen evolution, suppressed unwanted side reactions, and improved structural integrity for the graphene-LMTOF composite. This work highlights the advantages of solution-based carbon wrapping and offers a scalable strategy to prepare high-performance DRX cathodes for lithium-ion batteries.

carbon composite↗

DOE OSTI2025

Support of Adhesion Mechanisms in Al 2 O 3 Aerosol Deposition Through Laser-Induced Particle Impact Testing

Aerosol deposition (AD) is a kinetic spray process capable of depositing ceramic coatings at room temperature, but AD process development is generally a laborious exploration of a large process parameter space. Here, this paper presents a case study investigating whether laser-induced particle impact testing (LIPIT) could be applied to expedite development of an alumina (Al 2 O 3 ) coating on nickel (Ni): Specifically, whether LIPIT measurements could predict critical velocities of adhesion on Ni and Al 2 O 3 , and the effect of ball milling the Al 2 O 3 powder. Because LIPIT has a diffraction-limited lower bound on imageable particle size, the usefulness of Al 2 O 3 powder agglomerates as a proxy for single particles was additionally studied. Overall, LIPIT measurements and AD sprays agreed that ball milling dramatically improves adhesion. Additionally, LIPIT measurements of critical velocity of adhesion of Al 2 O 3 powder agglomerates on Ni and Al 2 O 3 substrates (150 meters per second [m/s] and 250 m/s, respectively) quantitatively agreed with predictions from a previously published model based on picoindentation and molecular dynamics simulations. Together, these findings support the established hypothesis that Al 2 O 3 adheres via a dislocation-mediated mechanism in AD, that Al 2 O 3 powder agglomerates adhere as individual constituent particles rather than collectively, and that, for this case study, LIPIT measurements were predictive of AD process parameters.

Al2O3↗

DOE OSTI2025

Densification, microstructure, and mechanical properties of Mo–30W alloys fabricated from conditioned powders

Refractory alloys, such as molybdenum-based systems, are attracting growing interest for applications in extreme environments, such as in the nuclear and aerospace industries. Recent advances in sintering technologies, coupled with mechanical alloying, have enabled the tailored design of these alloys by leveraging powder characteristics to control final microstructures and mechanical properties. In this study, Mo-30W alloys were fabricated using electric field-assisted sintering (EFAS) from ball-milled powders with and without hydrogen treatment to investigate the influence of surface oxides on material properties and sintering behavior. The results revealed that samples processed from as-ball-milled powder contained a high density of oxides within the microstructure, whereas oxide presence was significantly reduced in samples fabricated from hydrogen-treated powders. Interestingly, the two powder types led to opposite trends in grain size distribution: samples from untreated powders exhibited grain refinement from sample periphery to the center, while samples from hydrogen-treated powders showed grain coarsening toward the center. This behavior is attributed to temperature gradients present during sintering due to electrical percolation pathway differences during Joule heating. The powder surface oxides may have influenced the temperature distribution and grain evolution. Microhardness profiles measured along both axial and thickness directions were consistent with the grain size distribution. Furthermore, oxide films on powder surfaces have delayed densification by hindering particle necking and atomic diffusion during sintering.

36 - MATERIALS SCIENCE↗

DOE OSTI2024

An atomic beam of titanium for ultracold atom experiments

Here we generate an atomic beam of titanium (Ti) using a “Ti-ball” Ti-sublimation pump, which is a common getter pump used in ultrahigh vacuum systems. We show that the sublimated atomic beam can be optically pumped into the metastable 3d 3 ( 4 F)4s a 5 F 5 state, which is the lower energy level in a cycling optical transition that can be used for laser cooling. We measure the atomic density and transverse and longitudinal velocity distributions of the beam through laser fluorescence spectroscopy. We find a metastable atomic flux density of 4.3(2) × 10 9 s -1 cm -2 with a mean forward velocity of 773(8) m/s at 2.55 cm directly downstream of the center of the Ti-ball. Owing to the details of optical pumping, the beam is highly collimated along the transverse axis parallel to the optical pumping beam and the flux density falls off as 1/r. We discuss how this source can be used to load atoms into a magneto-optical trap.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Medium-density amorphous ice unveils shear rate as a new dimension in water’s phase diagram

Recent experiments revealed a new amorphous ice phase, medium-density amorphous ice (MDA), formed by ball-milling ice I h at 77 K [Rosu-Finsen et al., Science 379, 474–478 (2023)]. MDA has density between that of low-density amorphous (LDA) and high-density amorphous (HDA) ices, adding to the complexity of water’s phase diagram, known for its glass polyamorphism and two-state thermodynamics. The nature of MDA and its relation to other amorphous ices and liquid water remain unsolved. Here, we use molecular simulations under controlled pressure and shear rate at 77 K to produce and investigate MDA. Here. we find that MDA formed at constant shear rate is a steady-state nonequilibrium shear-driven amorphous ice (SDA), that can be produced by shearing ice I h , LDA, or HDA. Our results suggest that MDA could be obtained by ball-milling water glasses without crystallization interference. Increasing the shear rate at ambient pressure produces SDAs with densities ranging from LDA to HDA, revealing shear rate as a new thermodynamic variable in the nonequilibrium phase diagram of water. Indeed, shearing provides access to amorphous states inaccessible by controlling pressure and temperature alone. SDAs produced with shearing rates as high as 10 6 s −1 sample the same region of the potential energy landscape than hyperquenched glasses with identical density, pressure, and temperature. Intriguingly, SDAs obtained by shearing at ~10 8 s −1 have density, enthalpy, and structure indistinguishable from those of water “instantaneously” quenched from room temperature to 77 K over 10 ps, making them good approximants for the “true glass” of ambient liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

The properties of the nitrogen-vacancy center in milled chemical vapor deposition nanodiamonds

Fluorescent nanodiamonds (FNDs) containing negatively charged nitrogen-vacancy (NV − ) centers are vital for many emerging quantum sensing applications from magnetometry to intracellular sensing in biology. However, developing a scalable fabrication method for FNDs hosting color centers with consistent bulk-like photoluminescence (PL) and spin coherence properties remains a highly desired but unrealized goal. Here, we investigate optimized ball milling of single-crystal diamonds produced via chemical vapor deposition (CVD) and containing 2 ppm of substitutional nitrogen and 0.3 ppm of NV − to achieve this goal. The NV charge state, PL lifetime, and spin properties of bulk CVD diamond samples are directly compared to milled CVD FNDs and commercial high-pressure high-temperature (HPHT) FNDs. We find that on average, the relative contribution of the NV − charge state to the total NV PL is lower and the NV PL lifetime is longer in CVD FNDs compared to HPHT FNDs, both likely due to the lower N s 0 concentration in CVD FNDs. The CVD bulk and CVD FNDs on average show similar average T 1 spin relaxation times of 3.2 ± 0.7 ms and 4.7 ± 1.6 ms, respectively, compared to 0.17 ± 0.01 ms for commercial HPHT FNDs. Our results demonstrate that ball milling of CVD diamonds enables the large-scale fabrication of NV ensembles in FNDs with bulk-like T 1 spin relaxation properties.

chemical vapor deposition↗

DOE OSTI2025

Chiral edge states on spheres for lattice domain wall fermions

Recently Weyl edge states on manifolds in dimension 𝑑 +1 with a connected 𝑑-dimensional boundary were proposed as candidates for lattice regularization of chiral gauge theories, for even 𝑑. The examples considered to date include solid cylinders in any odd dimension, and the 3 ball with boundary 𝑆 2 . Here we consider the general case of a (𝑑+1)-dimensional ball for any even 𝑑 and show that the theory for the edge states on 𝑆 𝑑 describe a conventional Weyl fermion on a sphere with half-integer momenta. A possible advantage of such theories is that they can be discretized by a square lattice without breaking the underlying discrete hypercubic symmetry.

chiral symmetry↗

DOE OSTI2026

From Powder to Power: Tailored Pre-Milling Strategy that Optimizes Microstructure for Efficient Hydrogen Evolution

The hydrogen evolution reaction (HER) plays a critical role in enabling large-scale electrolytic hydrogen production and advancing future technologies and fuel production. Among non-precious metals, NiMo-based catalysts are particularly attractive due to their capability to promote both water dissociation and hydrogen adsorption in alkaline media. However, conventional NiMo catalysts often suffer from incomplete alloying, particle aggregation, weak metal–support interactions, and surface oxidation, which significantly limit active site utilization, electronic conductivity, and long-term stability. Herein, we report a scalable, solid-state, two-step ball milling strategy for constructing an efficient NiMo/C catalyst for the HER. Pre-milling the metal precursors prior to carbon incorporation promotes efficient solid-state activation, leading to the formation of uniformly alloyed, ultrafine, and defect-rich Ni–Mo nanoparticles with robust metal–carbon interfacial anchoring. Benefiting from this integrated structural design, the optimized NiMo/C catalyst exhibits low overpotentials and Tafel slopes, reduced charge-transfer resistance, and excellent durability under alkaline conditions. Comprehensive structural and surface analysis reveal that the enhanced HER performance can be attributed to the synergistic interplay of homogeneous Ni–Mo alloying, uniform nanoparticle dispersion on a defect-rich carbon scaffold, enhanced accessibility of catalytically active sites, and optimized electronic coupling that stabilizes the catalyst surface. This work highlights the two-step solid-state ball milling strategy as a simple, robust, and scalable route for the preparation of effective and durable non-precious metal HER electrocatalysts, offering practical insights toward large-scale and inexpensive hydrogen production.

Yang, Xiaoxuan [Oak Ridge National Laboratory (ORN↗

DOE OSTI2024

Report Summarizing the Mechanical Properties of a Large ODS Ferritic Alloy Ingot by Forging at High Temperatures for Future Mother Tube Production

Oxide dispersion strengthened (ODS) ferritic alloys are considered the benchmark fuel cladding and core structural material in advanced nuclear energy reactors that require high-temperature strength and creep properties and resistance to radiation damage. The ODS ferritic alloys including 14YWT are produced by mechanical alloying (MA), which is time-consuming and is associated with high manufacturing costs that are not beneficial to being used in advanced nuclear energy reactors. This report summarizes the accomplishments in FY24 in the INM program for producing an ODS ferritic alloy by high-deformation, high-temperature processing of reactive and ferritic alloy powders for advanced reactor fuel cladding applications. Following four hot forging experiments, it was concluded that several significant challenges were encountered that were difficult to overcome. These challenges were related to using high annealing temperatures for pressure assisted sintering processes to produce dense microstructures, but the high annealing temperatures result in long range diffusion of Ti through the bcc Fe lattice and react with the YIG particles that are distributed on the prior surfaces of the ferritic alloy powders. In addition, it was determined that the high deformations induced by forging at high temperatures were not very effective for fracturing the reactive YIG particles into smaller particles and distributing them into the interior of the ferritic alloy powders. Spark plasma sintering was attempted for shortening the time at high temperatures, which led to full densification but the microstructure characterization results still showed that Ti atoms diffused over long distances in the bcc Fe lattice and reacted with the YIG particles. Finally, a short 30 minute high intensity ball milling experiment was conducted on blended 14WT and YIG powders for inducing severe deformations that caused the initially spherical powders of 14WT decorated with the YIG particles on the surfaces to transform to flakes and fracturing of YIG particles into smaller particles that were incorporated into the bcc Fe lattice. Two forgings were performed with the high intensity milled powders: first annealing for 20 minutes at 850ºC followed by forging and second annealing for 20 minutes at 1,100ºC followed by forging. At 850ºC, Ti atoms are effectively immobile, thus allowing for densification albeit incomplete. The deformation by forging after annealing for 20 minutes at 1,100ºC favored dynamic recrystallization processes that led to nano-size grains with very high stored energy due to high dislocation density. The corresponding VH data showed significant hardening that correlated with estimated strengthening of ~1650 MPa. This hybrid processing approach combining high intensity ball milling of powder with annealing and forging showed the most promise for producing an oxide dispersing strengthened ferritic alloy.

36 MATERIALS SCIENCE↗