Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “autonomous flight dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Designing a Flight Test of a Flight Path Management System for Advanced Air Mobility Research

The National Aeronautics and Space Administration (NASA) has completed a flight test to evaluate the performance of an onboard prototype automation system operating in future high density urban airspace. The test was part of a research investigation of the Urban Air Mobility (UAM) concept, with a focus on a future environment having hundreds of simultaneous operations over a metropolitan area. The complexity of this future UAM airspace may require automation capable of replanning an aircraft’s path in the presence of traffic and other changing constraints. A live-virtual-constructive (LVC) approach was used to conduct the test. Prototype automation technology was integrated into one of the two live aircraft, which were combined with virtual traffic to create a mixed reality environment at the target airspace density. In-flight evaluation enabled verification of the automation’s functions and discovery of any unexpected behaviors resulting from its operation in an actual flight environment. The in-flight evaluation also provided data for validation of air traffic simulations. This paper discusses the design, methodology, and challenges overcome to conduct a successful flight test. Remaining challenges, future work, and recommendations to improve the flight test capability are also discussed.

Advanced Air Mobility↗
NASA NTRS2001

Integration of Libration Point Orbit Dynamics into a Universal 3-D Autonomous Formation Flying Algorithm

The autonomous formation flying control algorithm developed by the Goddard Space Flight Center (GSFC) for the New Millennium Program (NMP) Earth Observing-1 (EO-1) mission is investigated for applicability to libration point orbit formations. In the EO-1 formation-flying algorithm, control is accomplished via linearization about a reference transfer orbit with a state transition matrix (STM) computed from state inputs. The effect of libration point orbit dynamics on this algorithm architecture is explored via computation of STMs using the flight proven code, a monodromy matrix developed from a N-body model of a libration orbit, and a standard STM developed from the gravitational and coriolis effects as measured at the libration point. A comparison of formation flying Delta-Vs calculated from these methods is made to a standard linear quadratic regulator (LQR) method. The universal 3-D approach is optimal in the sense that it can be accommodated as an open-loop or closed-loop control using only state information.

Folta, David↗
NASA NTRS1996

A Benchmark Problem for Development of Autonomous Structural Modal Identification

This paper summarizes modal identification results obtained using an autonomous version of the Eigensystem Realization Algorithm on a dynamically complex, laboratory structure. The benchmark problem uses 48 of 768 free-decay responses measured in a complete modal survey test. The true modal parameters of the structure are well known from two previous, independent investigations. Without user involvement, the autonomous data analysis identified 24 to 33 structural modes with good to excellent accuracy in 62 seconds of CPU time (on a DEC Alpha 4000 computer). The modal identification technique described in the paper is the baseline algorithm for NASA's Autonomous Dynamics Determination (ADD) experiment scheduled to fly on International Space Station assembly flights in 1997-1999.

Pappa, Richard S.↗
NASA NTRS2003

Simulated Fuel Usage for Drag Compensated Spacecraft in Low Earth Orbit

Atmospheric drag causes the greatest uncertainty in the spacecraft flight dynamics equation for spacecraft in Low Earth Orbit (LEO). The continuously varying atmospheric density levels require increased spacecraft tracking to accurately predict spacecraft location. In addition, periodic propulsive maneuvers must be designed and performed to counteract the effects of drag on the spacecraft orbit. If atmospheric drag effects can be continuously and autonomously counteracted through the use of a drag-free control system, they will essentially be eliminated from the spacecraft flight dynamics equation. The main perturbations on the spacecraft will then be those due to the Earth s gravitational field, which are easily predicted. Although theoretically beneficial from a flight dynamics perspective, the costs associated with drag-free control must be determined and weighed against those benefits before the feasibility of drag-free control of spacecraft in LEO can be determined. Through the use of a MATLAEV Satellite Tool Kit simulation, this paper attempts to quantify one such cost associated with drag-free control: the amount of fuel needed for continuous drag compensation as measured by cumulative orbital velocity changes, or AV. This AV cost can then be compared to the fuel required for more traditional, periodic orbit raising maneuvers of every two to four weeks. The simulation considers various sized spacecraft, as measured by the spacecraft ballistic coefficient, in circular orbits of various altitudes and inclinations. The time between orbit raising maneuvers is allowed to decrease until it approaches near continuous. In this manner, the trend in AV cost can be seen as drag compensation moves from periodic to near continuous.

Fleck, Melissa E.↗
NASA NTRS2000

Flight Control System Development for the BURRO Autonomous UAV

Developing autonomous flying vehicles has been a growing field in aeronautical research within the last decade and will continue into the next century. With concerns about safety, size, and cost of manned aircraft, several autonomous vehicle projects are currently being developed; uninhabited rotorcraft offer solutions to requirements for hover, vertical take-off and landing, as well as slung load transportation capabilities. The newness of the technology requires flight control engineers to question what design approaches, control law architectures, and performance criteria apply to control law development and handling quality evaluation. To help answer these questions, this paper documents the control law design process for Kaman Aerospace BURRO project. This paper will describe the approach taken to design control laws and develop math models which will be used to convert the manned K-MAX into the BURRO autonomous rotorcraft. With the ability of the K-MAX to lift its own weight (6000 lb) the load significantly affects the dynamics of the system; the paper addresses the additional design requirements for slung load autonomous flight. The approach taken in this design was to: 1) generate accurate math models of the K-MAX helicopter with and without slung loads, 2) select design specifications that would deliver good performance as well as satisfy mission criteria, and 3) develop and tune the control system architecture to meet the design specs and mission criteria. An accurate math model was desired for control system development. The Comprehensive Identification from Frequency Responses (CIFER(R)) software package was used to identify a linear math model for unloaded and loaded flight at hover, 50 kts, and 100 kts. The results of an eight degree-of-freedom CIFER(R)-identified linear model for the unloaded hover flight condition are presented herein, and the identification of the two-body slung-load configuration is in progress.

Colbourne, Jason D.↗
NASA NTRSDate not supplied

Neo – Mars Adaptive Training Integrative Knowledge System (MATRIKS) to Improve Operational Performance and its Neural Basis for Spaceflight

With prolonged mission durations, spaceflight crews will become increasingly dependent on onboard technologies for knowledge acquisition and maintenance. It is expected that not all skills and knowledge required for these missions can be retained and retrieved based on pre-mission training alone. Limited and delayed communication will significantly constrain support from Mission Control and crews will increasingly rely on autonomous onboard technologies to successfully perform post-landing operations. With the present project we will target NASA’s particular interest in developing and assessing an adaptive, just-in-time countermeasure that will consolidate and improve skills that are most relevant to space flight operations. To achieve this aim, NASA established a Virtual NASA Specialized Center of Research (VNSCOR)referred to as “Mars Adaptive Training Integrative Knowledge System (MATRIKS)”, comprising the following three projects: (1) “Trinity–Multi-Environment Virtual Training for Long Duration Exploration Missions”, PI: A. Anderson (UC Boulder); (2) “Morpheus–A Haptic Sensory Supplement to Optimize In-Flight Adaptive Training for Human Control of Spacecraft Robotic Arms”, PI: S. Robinson, UC Davis); and the present project “Neo–Adaptive Training integrative knowledge System to Improve Operational Performance and its Neural Basis for Spaceflight” (UPenn, PI: A.C. Stahn). Neo leverages a validated workstation called 6DF that simulates a rendezvous and docking maneuver using real spacecraft flight dynamics. It is designed to (1) train and improve sensorimotor skills relevant for inflight and post-landing operational tasks; (2) feature an autonomous and adaptive training approach that does not rely on feedback from flight operations on the ground; (3) maximize the transfer of mission-relevant motor skills; (4) allow the assessment of the neural circuitry underlying the task; and (5) deliver the training in a motivating and meaningful way to astronauts. Neocomprises two overarching aims: First, we will identify the neural circuitry underlying spaceflight relevant tasks by performing a subset of the 6DFtaskduring functional magnetic resonance imaging (MRI)in a total of up to N=30 subjects with varying levels of 6DF training experience. Second, as part of the above-mentioned VNSCOR MATRIKS the proposed 6DF autonomous intelligent tutor system will be integrated in an additive manner with a haptic feedback intervention (Morpheus), and a multi-environment virtual trainer(Trinity).It is expected that Neo, Morpheus and Trinity mutually complement each other to facilitate an effective countermeasure tool to acquire and retain operational skills that are critical for exploration class missions. To assess the efficacy of this combined effort, the VNSCOR MATRIKS will collect data inN=16 crew members in one HERA campaign of 45 days duration with N=16 crew members(four missions with N=4 crew member seach).The primary goal is to identify changes in operational performance as assessed by NASA’s simulator of Canadarm2 operations, i.e., Robotic On-board Trainer (ROBoT-r) in response to MATRIKS. As part of Neo we will also identify if, and to what extent MATRIKS will promote transfer to general cognitive performance (Cognition battery), distinctive visuo-spatial tasks critical for telerobotic tasks (Spatial Cognition battery), and affect brain structural changes and the neural circuitry of key brain networks expected to be relevant for spaceflight-related performance. At the conclusion of the research, we will have defined and demonstrated the use of a neuroscience-based, adaptive training integrative knowledge system to potentially mitigate visuo-spatial and sensorimotor brain changes associated with prolonged isolation and confinement to reduce the likelihood or impact of potential decrements in human performance capabilities during long-duration space missions. The expected significance of this 4-year project relates to its relevance for facilitating effective countermeasure tools to acquire and retain operational skills that are critical for exploration class missions. This will support the development of necessary countermeasures and technologies in support of human space exploration, focusing on mitigating operational performance risks.

A C Stahn↗
NASA NTRS2016

Initial Satellite Formation Flight Results from the Magnetospheric Multiscale Mission

This paper will describe the results that have been obtained to date concerning MMS formation flying. The MMS spacecraft spin at a rate of 3.1 RPM, with spin axis roughly aligned with Ecliptic North. Several booms are used to deploy instruments: two 5 m magnetometer booms in the spin plane, two rigid booms of length 12.5 m along the positive and negative spin axes, and four flexible wire booms of length 60 m in the spin plane. Minimizing flexible motion of the wire booms requires that reorientation of the spacecraft spin axis be kept to a minimum: this is limited to attitude maneuvers to counteract the effects of gravity-gradient and apparent solar motion. Orbital maneuvers must therefore be carried out in essentially the nominal science attitude. These burns make use of a set of monopropellant hydrazine thrusters: two (of thrust 4.5 N) along the spin axis in each direction, and eight (of thrust 18 N) in the spin plane; the latter are pulsed at the spin rate to produce a net delta-v. An on-board accelerometer-based controller is used to accurately generate a commanded delta-v. Navigation makes use of a weak-signal GPS-based system: this allows signals to be received even when MMS is flying above the GPS orbits, producing a highly accurate determination of the four MMS orbits. This data is downlinked to the MMS Mission Operations Center (MOC) and used by the MOC Flight Dynamics Operations Area (FDOA) for maneuver design. These commands are then uplinked to the spacecraft and executed autonomously using the controller, with the ground monitoring the burns in real time.

satellite↗
NASA NTRS2012

Landsat Data Continuity Mission (LDCM) Flight Dynamics System (FDS)

The Landsat Data Continuity Mission (LDCM) will be launched in January 2013 to continue the legacy of Landsat land imagery collection that has been on-going for the past 40 years. While the overall mission and science goals are designed to produce the SAME data over the years, the ground systems designed to support the mission objectives have evolved immensely. The LDCM Flight Dynamics System (FDS) currently being tested and deployed for operations is highly automated and well integrated with the other ground system elements. The FDS encompasses the full suite of flight dynamics functional areas, including orbit and attitude determination and prediction, orbit and attitude maneuver planning and execution, and planning product generation. The integration of the orbit, attitude, maneuver, and products functions allows a very smooth flow for daily operations support with minimal input needed from the operator. The system also provides a valuable real-time component that monitors the on-board orbit and attitude during every ground contact and will autonomously alert the Flight Operations Team (FOT) personnel when any violations are found. This paper provides an overview of the LDCM Flight Dynamics System and a detailed description of how it is used to support space operations. For the first time on a Goddard Space Flight Center (GSFC)-managed mission, the ground attitude and orbits systems are fully integrated into a cohesive package. The executive engine of the FDS permits three levels of automation: low, medium, and high. The high-level, which will be the standard mode for LDCM, represents nearly lights-out operations. The paper provides an in-depth look at these processes within the FDS in support of LDCM in all mission phases.

Good, Susan M.↗
NASA NTRSDate not supplied

Dynamic Vehicle Assessment for Intelligent Contingency Management for Urban Air Mobility Vehicles

New algorithms will be required to ensure passenger and bystander safety during the expected era of autonomous urban air mobility (UAM) aircraft. This paper examines an approach for assessing the vehicle capability to fly itself and to complete a mission safely. The concepts combine elements of system identification, adaptive control, flight dynamics, envelope predictions, and handling qualities, as well as human pilot intuition. The approach is applied to a simulation of a generic distributed electric propulsion urban air mobility-type aircraft, which was developed under the NASA Transformational Tools and Technologies (TTT) project, Autonomous Systems / Intelligent Contingency Management subproject.

flight envelope prediction↗
NASA NTRSDate not supplied

Dynamic Vehicle Assessment for Intelligent Contingency Management of Urban Air Mobility Vehicles

New algorithms will be required to ensure passenger and bystander safety during the expected era of autonomous urban air mobility (UAM) aircraft. This paper examines an approach for assessing the vehicle capability to fly itself and to complete a mission safely. The concepts combine elements of system identification, adaptive control, flight dynamics, envelope predictions, and handling qualities, as well as human pilot intuition. The approach is applied to a simulation of a generic distributed electric propulsion urban air mobility-type aircraft, which was developed under the NASA Transformational Tools and Technologies (TTT) project, Autonomous Systems / Intelligent Contingency Management subproject.

flight envelope↗
NASA NTRSDate not supplied

Flight Test Configuration of the Sensor Payload and the Ground Nodes in Distributed Sensing Frameworks

The realization of the Urban Air Mobility (UAM) vision, entailing the deployment of high-density autonomous flights over urban areas, necessitates methodologies transcending contemporary airborne sensing techniques. An instrumental innovation in this realm is the advent of distributed sensing. In this paradigm, environmental sensors function as active agents, engaging in the triad of sensing, processing, and communication either amongst themselves, with ground stations, or both. This concerted effort creates a dynamic and responsive "smart space," facilitating real-time autonomous control. NASA Ames Research Center is actively engaged in a series of comprehensive indoor and outdoor flight tests to garner requisite data and insights essential for the actualization of this ambitious vision. This paper delineates the holistic configuration of the flight payload and the distributed ground nodes pivotal to the NASA flight test campaign. Furthermore, it expounds upon the intricacies of the sensor node communication framework. The narrative extends to provide a detailed overview of the strategic placement of distributed sensors and a comprehensive account of the varied indoor and outdoor flight tests orchestrated in pursuit of UAM objectives.

urban air mobility↗
NASA NTRSDate not supplied

Flight Test Configuration of the Sensor Payload and the Ground Nodes in Distributed Sensing Frameworks

The realization of the Urban Air Mobility (UAM) vision, entailing the deployment of high-density autonomous flights over urban areas, necessitates methodologies transcending contemporary airborne sensing techniques. An instrumental innovation in this realm is the advent of distributed sensing. In this paradigm, environmental sensors function as active agents, engaging in the triad of sensing, processing, and communication either amongst themselves, with ground stations, or both. This concerted effort creates a dynamic and responsive "smart space," facilitating real-time autonomous control. NASA Ames Research Center is actively engaged in a series of comprehensive indoor and outdoor flight tests to garner requisite data and insights essential for the actualization of this ambitious vision. This paper delineates the holistic configuration of the flight payload and the distributed ground nodes pivotal to the NASA flight test campaign. Furthermore, it expounds upon the intricacies of the sensor node communication framework. The narrative extends to provide a detailed overview of the strategic placement of distributed sensors and a comprehensive account of the varied indoor and outdoor flight tests orchestrated in pursuit of UAM objectives.

urban air mobility↗
NASA NTRS2016

UAV Research at NASA Langley: Towards Safe, Reliable, and Autonomous Operations

Unmanned Aerial Vehicles (UAV) are fundamental components in several aspects of research at NASA Langley, such as flight dynamics, mission-driven airframe design, airspace integration demonstrations, atmospheric science projects, and more. In particular, NASA Langley Research Center (Langley) is using UAVs to develop and demonstrate innovative capabilities that meet the autonomy and robotics challenges that are anticipated in science, space exploration, and aeronautics. These capabilities will enable new NASA missions such as asteroid rendezvous and retrieval (ARRM), Mars exploration, in-situ resource utilization (ISRU), pollution measurements in historically inaccessible areas, and the integration of UAVs into our everyday lives all missions of increasing complexity, distance, pace, and/or accessibility. Building on decades of NASA experience and success in the design, fabrication, and integration of robust and reliable automated systems for space and aeronautics, Langley Autonomy Incubator seeks to bridge the gap between automation and autonomy by enabling safe autonomous operations via onboard sensing and perception systems in both data-rich and data-deprived environments. The Autonomy Incubator is focused on the challenge of mobility and manipulation in dynamic and unstructured environments by integrating technologies such as computer vision, visual odometry, real-time mapping, path planning, object detection and avoidance, object classification, adaptive control, sensor fusion, machine learning, and natural human-machine teaming. These technologies are implemented in an architectural framework developed in-house for easy integration and interoperability of cutting-edge hardware and software.

Davila, Carlos G.↗
NASA NTRS2001

Dynamics and Stability and Control Characteristics of the X-37

This paper presents the stability and control analysis and the control design results for the Boeing/NASA/AFRL X-37. The X-37 is a flight demonstrator vehicle that will go into space and after its mission, autonomously reenter and land on a conventional runway. This paper studies the dynamics and control of the X-37 from atmospheric reentry through landing. A nominal trajectory that lands on the Edwards Air Force Base Lakebed is considered for all the analysis and design. The X-37's longitudinal and lateral/directional bare-airframe characteristics are presented. The level of maneuvering control power is assessed. Vehicle trim with multiple surfaces is discussed. Special challenges where the wings loose roll effectiveness are discussed and solutions are presented. Aerodynamic uncertainties and flexibility modeling issues are presented. Control design results and robustness analysis methods are presented. Results are provided for the Entry, Terminal Area Energy Management (TAEM), and Approach and Land phases.

Chaudhary, Ashwani↗
NASA NTRS2003

Tactical Maneuvering Using Immunized Sequence Selection

This paper describes a tactical maneuvering system that uses an artificial immune system based approach for selecting maneuver sequences. This approach combines the problem solving abilities of genetic algorithms with the memory retention characteristics of an immune system. Of significant importance here is the fact that the tactical maneuvering system can make time-critical decisions to accomplish near-term objectives within a dynamic environment. These objectives can be received from a human operator, autonomous executive, or various flight planning specialists. Simulation tests were performed using a high performance military aircraft model. Results demonstrate the potential of using immunized sequence selection in order to accomplish tactical maneuvering objectives ranging from flying to a location while avoiding unforeseen obstacles, to performing relative positioning in support of air combat maneuvering.

Kaneshige, John↗