SEARCH · Engineering Papers

Results for “asymptotic normalization coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

36 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Comparison of observed rheological properties of hard wheat flour dough with predictions of the Giesekus-Leonov, White-Metzner and Phan-Thien Tanner models

The measured rheological behavior of hard wheat flour dough was predicted using three nonlinear differential viscoelastic models. The Phan-Thien Tanner model gave good zero shear viscosity prediction, but overpredicted the shear viscosity at higher shear rates and the transient and extensional properties. The Giesekus-Leonov model gave similar predictions to the Phan-Thien Tanner model, but the extensional viscosity prediction showed extension thickening. Using high values of the mobility factor, extension thinning behavior was observed but the predictions were not satisfactory. The White-Metzner model gave good predictions of the steady shear viscosity and the first normal stress coefficient but it was unable to predict the uniaxial extensional viscosity as it exhibited asymptotic behavior in the tested extensional rates. It also predicted the transient shear properties with moderate accuracy in the transient phase, but very well at higher times, compared to the Phan-Thien Tanner model and the Giesekus-Leonov model. None of the models predicted all observed data consistently well. Overall the White-Metzner model appeared to make the best predictions of all the observed data.

Non-NASA Center↗

NASA NTRS1985

Flow through very porous screens

Flow through and around screens with small resistance coefficient were analyzed. Both steady and oscillatory flows are considered, however, the case of a screen normal to the flow is treated. At second order in the asymptotic expansion the steady flow normal to the screen is nonuniform along the screen, due to components induced by the wake and by tangential drag. The third order pressure drop is nonuniform and the wake contains distributed vorticity, in addition to the vortex sheet along its boundary. The unsteady drag coefficient is found as a function of frequency.

Durbin, P. A.↗

NASA NTRS1974

Electromagnetic and scalar diffraction by a right-angled wedge with a uniform surface impedance

The diffraction of an electromagnetic wave by a perfectly-conducting right-angled wedge with one surface covered by a dielectric slab or absorber is considered. The effect of the coated surface is approximated by a uniform surface impedance. The solution of the normally incident electromagnetic problem is facilitated by introducing two scalar fields which satisfy a mixed boundary condition on one surface of the wedge and a Neumann of Dirichlet boundary condition on the other. A functional transformation is employed to simplify the boundary conditions so that eigenfunction expansions can be obtained for the resulting Green's functions. The eigenfunction expansions are transformed into the integral representations which then are evaluated asymptotically by the modified Pauli-Clemmow method of steepest descent. A far zone approximation is made to obtain the scattered field from which the diffraction coefficient is found for scalar plane, cylindrical or sperical wave incident on the edge. With the introduction of a ray-fixed coordinate system, the dyadic diffraction coefficient for plane or cylindrical EM waves normally indicent on the edge is reduced to the sum of two dyads which can be written alternatively as a 2 X 2 diagonal matrix.

Hwang, Y. M.↗

DOE OSTI2024

A reduced-order model for nonlinear radiative transfer problems based on moment equations and POD-Petrov-Galerkin projection of the normalized Boltzmann transport equation

A data-driven projection-based reduced-order model (ROM) for nonlinear thermal radiative transfer (TRT) problems is presented. The TRT ROM is formulated by (i) a hierarchy of low-order quasidiffusion (aka variable Eddington factor) equations for moments of the radiation intensity and (ii) the normalized Boltzmann transport equation (BTE). The multilevel system of moment equations is derived by projection of the BTE onto a sequence of subspaces which represent elements of the phase space of the problem. Exact closure for the moment equations is provided by the Eddington tensor. A Petrov-Galerkin (PG) projection of the normalized BTE is formulated using a proper orthogonal decomposition (POD) basis representing the normalized radiation intensity over the whole phase space and time. The Eddington tensor linearly depends on the solution of the normalized BTE. By linear superposition of the POD basis functions, a low-rank expansion of the Eddington tensor is constructed with coefficients defined by the PG projected normalized BTE. The material energy balance (MEB) equation is coupled with the effective gray low-order equations which exist on the same dimensional scale as the MEB equation. The resulting TRT ROM is structure and asymptotic preserving. A detailed analysis of the ROM is performed on the classical Fleck-Cummings (F-C) TRT multigroup test problem in 2D geometry. Numerical results are presented to demonstrate the ROM's effectiveness in the simulation of radiation wave phenomena. Importantly, the ROM is shown to produce solutions with sufficiently high accuracy while using low-rank approximation of the normalized BTE solution. Essential physical characteristics of supersonic radiation wave are preserved in the ROM solutions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1985

Flow through very porous inclined screens

The steady, inviscid flow through and around a screen inclined at a uniform angle to the incoming flow was investigated. For a screen placed in an infinite flow field, an asymptotic analysis for small resistance coefficients was performed, and the effects of inclination were determined. The velocity at first order in the asymptotic expansion was nonuniform along the screen. This nonuniformity caused the wake behind the screen to contain distributed vorticity at second order. These effects therefore occurred at one order lower than for normal screens.

Muramoto, K. K.↗

NASA NTRS1985

Flow through very porous inclined screens

Muramoto, K. K.↗

DOE OSTI2024

Transport-driven toroidal rotation with general viscosity profile

Abstract Using the assumption of a weak normalized turbulent viscosity, usually valid in practice, the modulated-transport model (Stoltzfus-Dueck 2012 Phys. Plasmas 19 055908) is generalized to allow the turbulent transport coefficient to vary in an arbitrary way on radial and poloidal position. The new approach clarifies the physical interpretation of the earlier results and significantly simplifies the calculation, via a boundary-layer asymptotic method. Rigorous detailed appendices verify the result of the simple boundary-layer calculation, also demonstrating that it achieves the claimed order of accuracy and providing a concrete prediction for the strong plasma flows in the immediate vicinity of the last closed flux surface. The new formulas are used to predict plasma rotation at the core-edge boundary, in cases with and without externally applied torque. Dimensional formulas and extensive discussion are provided, to support experimental application of the new model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1977

On the gravitational potential and field anomalies due to thin mass layers

The gravitational potential and field anomalies for thin mass layers are derived using the technique of matched asymptotic expansions. An inner solution is obtained using an expansion in powers of the thickness and it is shown that the outer solution is given by a surface distribution of mass sources and dipoles. Coefficients are evaluated by matching the inner expansion of the outer solution with the outer expansion of the inner solution. The leading term in the inner expansion for the normal gravitational field gives the Bouguer formula. The leading term in the expansion for the gravitational potential gives an expression for the perturbation to the geoid. The predictions given by this term are compared with measurements by satellite altimetry. The second-order terms in the expansion for the gravitational field are required to predict the gravity anomaly at a continental margin. The results are compared with observations.

Ockendon, J. R.↗

DOE OSTI2024

Final Report on Predictive Analyses of PRD as Function of Anomalies

This report summarizes the work completed in FY-2024 to analyze the power reactivity decrement (PRD) concepts of the ARC-100 core. The PRD has been traditionally defined by the reactivity change from a hot zero power (HZP) to a particular power. Consequently, the PRD accounts for the core reactivity changes due to increase coolant temperature gradient axially and radially across the core, and increased fuel temperature. The coolant temperature gradient leads to sodium and structure density changes, to radial core expansion from assembly flowering and bowing (due to axial and radial temperature gradients within the assemblies), and to control rod driveline thermal expansion. The fuel temperature increase associated with coolant temperature and power increases leads to Doppler effect and axial thermal expansion. In this work, the normal operating Hot Full Power (HFP) state is the only power level of interest, so analyses focus on the PRD calculated from HZP to HFP. The PRD has been used to assess the reactor safety features asymptotically in unprotected accident scenarios, including the loss of heat sink (LOHS), loss of flow (LOF), and transient overpower (TOP) without scram. The PRD concept relies on the “global” reactivity coefficients A, B, and C that are estimated based on “individual” reactivity effects (Doppler, sodium density, etc.). The objectives of this work are: 1) to improve and verify the methodology used to calculate the ABC coefficients used in the PRD, 2) to assess if the PRD can be used to reliably identify abnormal events. This report fulfills the FY-2024 scope of WBS#1.15.8.3 activity, “ANL0120 – Predictive Analyses of PRD as function of deformation”. The PRD concept is described in Sections 2. Additional effort in refining the methodology for core bowing modeling is performed in Sections 3. Then, two verification exercises are proposed in Section 4 to benchmark these coefficients based on direct neutronic-only calculations and on dynamic core transient simulations. Finally, the PRD approach is assessed for the detection of several unexpected events, such as primary flow perturbation or improper fuel loading, in Section 5.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS1988

Interior impedance wedge diffraction with surface waves

The exact impedance wedge solution is evaluated asymptotically using the method of steepest descents for plane wave illumination at normal incidence. Uniform but different impedances on each face are considered for both soft and hard polarizations. The asymptotic solution isolates the incident, singly reflected, multiply reflected, diffracted, and surface wave fields. Multiply reflected fields of any order are permitted. The multiply reflected fields from the exact solution are written as ratios of auxiliary Maliuzhinets functions, whereas a geometrical analysis gives the reflected fields as products of reflection coefficients. These two representations are shown to be identical in magnitude, phase and the angular range over which they exist. The diffracted field includes four Fresnel transition functions as in the perfect conductor case, and the expressions for the appropriate discontinuities at the shadow boundaries are presented. The surface wave exists over a finite angular range and only for certain surface impedances. A surface wave transition field is included to retain continuity. Computations are presented for interior wedge diffractions although the formulation is valid for both exterior and interior wedges.

Balanis, Constantine A.↗

DOE OSTI2025

The effective number of parameters in kernel density estimation

We devise a new formula for measuring the effective degrees of freedom (EDoF) in kernel density estimation (KDE). Starting from the orthogonal polynomial sequence (OPS) expansion for the ratio of the empirical to the oracle density, we show how convolution with the kernel leads to a new OPS with respect to which one may express the resulting KDE. The expansion coefficients of the two OPS systems can then be related via a kernel sensitivity matrix, which leads to a natural oracle definition of EDoF through the trace operator. Asymptotic properties of the (empirical) plug-in EDoF are worked out through influence functions, and connections with other empirical EDoFs are established. Minimization of Kullback-Leibler divergence is investigated as an alternative to integrated squared error based bandwidth selection rules, yielding a new normal scale rule. The methodology, which arises from a proper oracle formulation and is not restricted to convolution kernels, suggests the possibility of a new bandwidth selection rule based on an information criterion such as AIC.

bandwidth selection↗

NASA NTRS1972

Gyrosynchrotron radiation and its transfer in a magnetoactive plasma.

Gyrosynchrotron radiation fields from mildly relativistic electrons in a magnetoactive plasma are asymptotically calculated by using the Green tensor and the Fourier transformation. These fields consist of the two components which correspond to the ordinary and extraordinary modes. Taking into account these fields, the emissivities and the absorption coefficients from an arbitrary distribution of electrons are calculated in order to discuss the intensity, spectrum, and polarization of gyrosynchrotron radiation. In general, the transfer of electromagnetic energy takes place along a direction different from that of the wave normal since the radiation fields have a nonvanishing component along the direction of the wave normal. A consideration is given on the problem of radiative transfer in relation to the Stokes parameters.

Sakurai, K.↗

NASA NTRS2000

Radiative Properties of Cirrus Clouds in the Infrared (8-13 microns) Spectral Region

Atmospheric radiation in the infrared (IR) 8-13 microns spectral region contains a wealth of information that is very useful for the retrieval of ice cloud properties from aircraft or space-borne measurements. To provide the scattering and absorption properties of nonspherical ice crystals that are fundamental to the IR retrieval implementation, we use the finite-difference time domain (FDTD) method to solve for the extinction efficiency, single-scattering albedo, and the asymmetry parameter of the phase function for ice crystals smaller than 40 microns. For particles larger than this size, the improved geometric optics method (IGOM) can be employed to calculate the asymmetry parameter with an acceptable accuracy, provided that we properly account for the inhomogeneity of the refracted wave due to strong absorption inside the ice particle. A combination of the results computed from the two methods provides the asymmetry parameter for the entire practical range of particle sizes between 1 micron and 10000 microns over wavelengths ranging from 8 microns to 13 microns. For the extinction and absorption efficiency calculations, several methods including the IGOM, Mie solution for equivalent spheres (MSFES), and the anomalous diffraction theory (ADT) can lead to a substantial discontinuity in comparison with the FDTD solutions for particle sizes on the order of 40 microns. To overcome this difficulty, we have developed a novel approach called the stretched scattering potential method (SSPM). For the IR 8-13 microns spectral region, we show that SSPM is a more accurate approximation than ADT, MSFES, and IGOM. The SSPM solution can be further refined numerically. Through a combination of the FDTD and SSPM, we have computed the extinction and absorption efficiency for hexagonal ice crystals with sizes ranging from 1 to 10000 microns at 12 wavelengths between 8 and 13 microns Calculations of the cirrus bulk scattering and absorption properties are performed for 30 size distributions obtained from various field campaigns for midlatitude and tropical cirrus cloud systems. Parameterization of these bulk scattering properties is carried out by using second-order polynomial functions for the extinction efficiency and the single-scattering albedo and the power law expression for the asymmetry parameter. We note that the volume-normalized extinction coefficient can be separated into two parts: one is inversely proportional to effective size and is independent of wavelength, and the other is the wavelength-dependent effective extinction efficiency. Unlike conventional parameterization efforts, the present parameterization scheme is more accurate because only the latter part of the volume-normalized extinction coefficient is approximated in terms of an analytical expression. After averaging over size distribution, the single-scattering albedo is shown to decrease with an increase in effective size for wavelengths shorter than 10.0 microns whereas the opposite behavior is observed for longer wavelengths. The variation of the asymmetry parameter as a function of effective size is substantial when the effective size is smaller than 50 microns. For effective sizes larger than 100 microns, the asymmetry parameter approaches its asymptotic value. The results derived in this study can be useful to remote sensing applications involving IR window bands under cirrus cloud conditions.

Yang, Ping↗

NASA NTRS1997

A Near-Wall Reynolds-Stress Closure without Wall Normals

With the aid of near-wall asymptotic analysis and results of direct numerical simulation, a new near-wall Reynolds stress model (NNWRS) is formulated based on the SSG high-Reynolds-stress model with wall-independent near-wall corrections. Only one damping function is used for flows with a wide range of Reynolds numbers to ensure that the near-wall modifications diminish away from the walls. The model is able to reproduce complicated flow phenomena induced by complex geometry, such as flow recirculation, reattachment and boundary-layer redevelopment in backward-facing step flow and secondary flow in three-dimensional square duct flow. In simple flows, including fully developed channel/pipe flow, Couette flow and boundary-layer flow, the wall effects are dominant, and the NNWRS model predicts less degree of turbulent anisotropy in the near-wall region compared with a wall-dependent near-wall Reynolds Stress model (NWRS) developed by So and colleagues. The comparison of the predictions given by the two models rectifies the misconception that the overshooting of skin friction coefficient in backward-facing step flow prevalent in those near-wall, models with wall normal is caused by he use of wall normal.

Yuan, S. P.↗

NASA NTRS1982

Measured pressure distributions, aerodynamic coefficients and shock shapes on blunt bodies at incidence in hypersonic air and CF4

Pressure distributions, aerodynamic coefficients, and shock shapes were measured on blunt bodies of revolution in Mach 6 CF4 and in Mach 6 and Mach 10 air. The angle of attack was varied from 0 deg to 20 deg in 4 deg increments. Configurations tested were a hyperboloid with an asymptotic angle of 45 deg, a sonic-corner paraboloid, a paraboloid with an angle of 27.6 deg at the base, a Viking aeroshell generated in a generalized orthogonal coordinate system, and a family of cones having a 45 deg half-angle with spherical, flattened, concave, and cusp nose shapes. Real-gas effects were simulated for the hperboloid and paraboloid models at Mach 6 by testing at a normal-shock density ratio of 5.3 in air and 12 CF4. Predictions from simple theories and numerical flow field programs are compared with measurement. It is anticipated that the data presented in this report will be useful for verification of analytical methods for predicting hypersonic flow fields about blunt bodies at incidence.

Miller, C. G., III↗

NASA NTRS1992

Electromagnetic scattering by coated convex surfaces and wedges simulated by approximate boundary conditions

Asymptotic/high-frequency solutions are developed for analyzing the non-specular scattering mechanisms associated with coated convex surfaces and edges simulated by approximate boundary conditions. In particular, the standard impedance boundary conditions (SIBC's) and the second order generalized impedance boundary conditions (GIBC's) are employed for a characterization of the edge diffraction, creeping wave, and surface diffracted wave contributions. To study the creeping wave and surface diffracted wave mechanisms, rigorous UTD (uniform geometrical theory of diffraction) diffraction coefficients are developed for a convex coated cylinder simulated with SIBC's and GIBC's. The ray solutions obtained remain valid in the transition region and reduce uniformly to those in the deep lit and shadow regions. A uniform asymptotic solution is also presented for observations in the close vicinity of the cylinder. The diffraction coefficient for a convex cylinder are obtained via a generalization of the corresponding ones of the circular cylinder. To validate the asymptotic/high-frequency solution, integral equations are derived for both E and H-polarization and solved numerically using the method of moments. Results are presented for a single and three layered coated convex cylinder. Some insights are also provided on the accuracy of the employed GIBC's versus SIBC's for application to curved surfaces. To characterize the scattering by impedance wedges illuminated at skew incidence, diffraction coefficients are derived from an approximate solution of the governing functional difference equations. This solution exactly recovers the known ones for an impedance half plane or an arbitrary wedge at normal incidence, and to validate it for other wedge angles, a moment method code was used. Finally, to test the usefulness of the approximate skew incidence impedance wedge diffraction coefficient for three dimensional structures, equivalent currents are derived in the context of the physical theory of diffraction (PTD) for a finite length impedance wedge of arbitrary internal angles. These are incorporated in a standard general purpose PTD code and results are presented for a number of different impedance structures.

Syed, H. H.↗

DOE OSTI2022

Black hole scattering and partition functions

When computing the ideal gas thermal canonical partition function for a scalar outside a black hole horizon, one encounters the divergent single-particle density of states (DOS) due to the continuous nature of the normal mode spectrum. Recasting the Lorentzian field equation into an effective 1D scattering problem, we argue that the scattering phases encode non-trivial information about the DOS and can be extracted by “renormalizing” the DOS with respect to a reference. This defines a renormalized free energy up to an arbitrary additive constant. Interestingly, we discover that the 1-loop Euclidean path integral, as computed by the Denef-Hartnoll-Sachdev formula, fixes the reference free energy to be that on a Rindler-like region, and the renormalized DOS captures the quasinormal modes for the scalar. We support these claims with the examples of scalars on static BTZ, Nariai black holes and the de Sitter static patch. For black holes in asymptotically flat space, the renormalized DOS is captured by the phase of the transmission coefficient whose magnitude squared is the greybody factor. We comment on possible connections with recent works from an algebraic point of view.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS2015

Aspects of Cool-Flame Supported Droplet Combustion in Microgravity

Droplet combustion experiments performed on board the International Space Station have shown that normal-alkane fuels with negative temperature coefficient (NTC) chemistry can support quasi-steady, low-temperature combustion without any visible flame. Here we review the results for n-decane, n-heptane, and n-octane droplets burning in carbon dioxidehelium diluted environments at different pressures and initial droplet sizes. Experimental results for cool-flame burning rates, flame standoff ratios, and extinction diameters are compared against simplified theoretical models of the phenomenon. A simplified quasi-steady model based on the partial-burning regime of Lin predicts the burning rate, and flame standoff ratio reasonably well for all three normal alkanes. The second-stage cool-flame burning and extinction following the first-stage hot-flame combustion, however, shows a small dependence on the initial droplet size, thus deviating from the quasi-steady results. An asymptotic model that estimates the oxygen depletion by the hot flame and its influence on cool-flame burning rates is shown to correct the quasi-steady results and provide a better comparison with the measured burning-rate results.This work was supported by the NASA Space Life and Physical Sciences Research and Applications Program and the International Space Station Program.

cool flames↗