Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytic continuation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

A systematic method for computer design of supercritical airfoils in cascade

A computer code has been developed for the direct calculation of shockless transonic airfoils whose pressure distributions can be assigned within reasonable limits. The partial differential equations of two-dimensional inviscid gas dynamics are solved by analytic continuation into the domain of two independent complex characteristic coordinates. The domain of integration is mapped conformally onto the unit circle in the hodograph plane of one of these coordinates. It is possible to formulate a boundary value problem on this circle for the stream function that is well posed in the case of transonic flow. This enables the formulation of a procedure for the calculation of an airfoil on which the speed is prescribed as a function of the arc length

Garabedian, P.↗
NASA NTRS1978

Direct numerical solution of the transonic perturbation integral equation for lifting and nonlifting airfoils

The linear transonic perturbation integral equation previously derived for nonlifting airfoils is formulated for lifting cases. In order to treat shock wave motions, a strained coordinate system is used in which the shock location is invariant. The tangency boundary conditions are either formulated using the thin airfoil approximation or by using the analytic continuation concept. A direct numerical solution to this equation is derived in contrast to the iterative scheme initially used, and results of both lifting and nonlifting examples indicate that the method is satisfactory.

Nixon, D.↗
NASA NTRS1979

Improved prediction of laminar leading edge separation

Research was conducted to provide a definite criterion for the prediction of the bubble burst on airfoils typical of those used for fighter wings. The approach taken was to correlate existing airfoil bubble burst data using various parameters at the laminar separation point. The method due to Weber was modified to provide a continuous analytic solution for the velocity distribution around the airfoil leading edge. Coupling the modified Weber method with the Stratford laminar separation prediction method leads to a universal chart giving the conditions at separation as a function of stagnation location and leading edge radius. Application of the combined method to available two-dimensional airfoil data resulted in an empirical criterion presenting the limiting local velocity gradient at separation as a function of the boundary layer momentum thickness at separation for bubble burst. The correlation leads as well to the qualitative explanation of two types of laminar stall: thin airfoil and leading edge. The validity of the correlation is demonstrated by predicting the lift coefficient and angle of attack for stall on airfoils with leading edge or trailing edge flaps.

Herring, R. N.↗
NASA NTRS1979

Semiclassical theory of electronically nonadiabatic transitions in molecular collision processes

An introductory account of the semiclassical theory of the S-matrix for molecular collision processes is presented, with special emphasis on electronically nonadiabatic transitions. This theory is based on the incorporation of classical mechanics with quantum superposition, and in practice makes use of the analytic continuation of classical mechanics into the complex space of time domain. The relevant concepts of molecular scattering theory and related dynamical models are described and the formalism is developed and illustrated with simple examples - collinear collision of the A+BC type. The theory is then extended to include the effects of laser-induced nonadiabatic transitions. Two bound continuum processes collisional ionization and collision-induced emission also amenable to the same general semiclassical treatment are discussed.

Lam, K. S.↗
NASA NTRS1978

A semiclassical approach to collisional ionization with application to the Ar-He system

A semiclassical approach based on the propagation of classical trajectories on potential surfaces analytically continued into the complex plane, together with a discretization procedure, has been developed for the problem of collisional ionization. Based on Franck-Condon considerations the formalism is reduced to that of the two-state approximation. Preionization loss and tunnelling beyond turning points have not been considered. Calculated partial ionization cross sections for the Ar-He system show good agreement with a fully quantum mechanical treatment.

Lam, K.-S.↗
NASA NTRS1980

Shockless airfoils for wings, compressors, and turbines

The major aspects of a code for the design of shockless airfoils in two-dimensional transonic flow are reviewed. The code is based on a method of analytic continuation into the domain of two complex characteristic variables, which makes it possible to associate a shockless airfoil with a given pressure distribution. This procedure is compared with another more direct method based on a two-dimensional analysis code that has had wide acceptance by the aircraft industry.

Garabedian, P. R.↗
NASA NTRS1981

Multiwall TPS - An emerging concept

Research on titanium multiwall used for thermal protection is reviewed. Continuing analytical and experimental studies yielding a fundamental understanding of the thermal and structural performance of the basic multiwall concept are presented noting that central to this understanding is a knowledge of the extensional behavior of the dimpled sheets since the thinner flat sheets will buckle and be relatively ineffective in supporting compressive loads. Results from radiant heating, aerothermal, vibration, acoustic and lightning strike tests are described as part of an effort to verify the performance of multiwall tiles under representative operating conditions. Flight tests of a large array of tiles are also planned as part of an orbiter experiments program. The research effort is being extended from flat all-titanium multiwall configurations limited to temperatures below 810 K to curved surfaces and higher temperature versions. Multi-wall concepts are found to offer the durability of metallic systems and to be mass competitive with the insulation system currently used on the Space Shuttle Orbiter.

Shideler, J. L.↗
NASA NTRS1981

A new look at Fresnel field computation using the Jacobi-Bessel series

Computational procedures that would be useful in finding the Fresnel field from a knowledge of the Jacobi-Bessel expansion of the far field are considered. The range of validity of the Fresnel approximation is carefully examined by comparing it with the exact closed form solution for the uniform circular aperture. Also investigated numerically, and in great detail, is the range of validity (over theta) of the Fresnel small angle (FSA) approximation. For moderate sized apertures as small as 10 wavelengths, it is found that the FSA approximation is very accurate to angles as wide as four or more sidelobes (as seen in the far zone). A very efficient computational method is shown to exist for the radiation integral in the form of a single series expansion that is analytically continuous and convergent for a wide range of observation points in three-dimensional space.

Galindo-Israel, V.↗
NASA NTRS1981

Plane-polar Fresnel and far-field computations using the Fresnel-Wilcox and Jacobi-Bessel expansions

It is pointed out that the computation of the Fresnel fields for large aperture antennas is significant for many applications. The present investigation is concerned with an approach for the effective utilization of the coefficients of the Jacobi-Bessel series for the far-field to obtain an analytically continuous representation of the antenna field which is valid from the Fresnel region into the far field. Attention is given to exact formulations and closed form solutions, Fresnel and Fresnel small angle approximations, aspects of field expansion, the accuracy of the Fresnel and Fresnel small angle approximations, and the Jacobi-Bessel expansion applied to the Fresnel small angle approximation.

Rahmat-Samii, Y.↗
NASA NTRS1984

Effects of boundary layer refraction and fuselage scattering on fuselage surface noise from advanced turboprop propellers

An acoustic disturbance's propagation through a boundary layer is discussed with a view to the analysis of the acoustic field generated by a propfan rotor incident to the fuselage of an aircraft. Applying the parallel flow assumption, the resulting partial differential equations are reduced to an ordinary acoustic pressure differential equation by means of the Fourier transform. The methods used for the solution of this equation include those of Frobenius and of analytic continuation; both yield exact solutions in series form. Two models of the aircraft fuselage-boundary layer system are considered, in the first of which the fuselage is replaced by a flat plate and the acoustic field is assumed to be two-dimensional, while in the second the fuselage is a cylinder in a fully three-dimensional acoustic field. It is shown that the boundary layer correction improves theory-data comparisons over simple application of a pressure-doubling rule at the fuselage.

Mcaninch, G. L.↗
NASA NTRS1984

Comment on 'Acoustic plasma modes'

In a recent treatment of the T = 0 acoustic plasma modes of a two-component Fermi liquid with Coulomb forces, Appel and Overhauser conclude that there exist three generally damped longitudinal acoustic branches. It is observed that this conclusion results from an inapplicable analytic continuation in their solution of the transport equations. There is only one longitudinal acoustic branch, and, in fact, when applied to the standard one-component Fermi-liquid model, the method of Appel and Overhauser also leads to the incorrect conclusion that there exist two longitudinal acoustic branches.

Oliva, J.↗
NASA NTRS1985

An implicit time-marching method for studying unsteady flow with massive separation

A fully implicit time-marching method is developed such that all spatial derivatives are approximated using central differences, but no use is made of any artificial dissipation. The numerical method solves the discretized equations using Alternating Direction Implicit-Block Gaussian Elimination technique. The method is implemented in the unsteady analysis, which solves the incompressible Navier-Stokes equations in terms of vorticity and stream function in generalized orthogonal coordinates. A clustered conformal C-grid is employed, and every effort is made to resolve the various length scales in the flow problem. The metric discontinuity at the branch-cut is treated appropriately using analytic continuation. Introduction of the BGE reordering permits implicit treatment of the branch cut in the numerical method. The vorticity singularity at the cusped trailing edge is also appropriately treated. This accurate and efficient implicit method is used to study flow at Re = 1000, past a 12-percent thick symmetric Joukowski airfoil at high angle of attack 30 and 53 deg.

Osswald, G. A.↗
NASA NTRS1987

Hard-sphere fluid in infinite dimensions

The exact Mayer series is derived for the pressure, density, and equation of state of a hard-sphere fluid in the limit of infinite space dimensions D. The Mayer series can be analytically continued into the full (cut) activity plane, and there is no sign of a phase transition. The quantum-mechanical system is also treated. For D = infinity, the fluid behaves like an ideal Bose gas and undergoes a Bose-Einstein condensation.

Wyler, D.↗
NASA NTRS1988

Filling the expertise gap

Aeroelasticity, structures, and stability-and-control specialists can work in concerted fashion during the early design phases of future aircraft to achieve active control of naturally unstable configurations. In order to take full advantage of active control, attention must be given by designers to control-law synthesis, and to tools for the efficient synthesis and analysis of complex flexible-aircraft control systems. Analysts must consider interfaces among unsteady aerodynamics, structures, and control theory, as explored by the theory of analytic continuation for unsteady aerodynamics.

Abel, Irving↗
NASA NTRS1989

Fourier transform methods in local gravity modeling

New algorithms were derived for computing terrain corrections, all components of the attraction of the topography at the topographic surface and the gradients of these attractions. These algoriithms utilize fast Fourier transforms, but, in contrast to methods currently in use, all divergences of the integrals are removed during the analysis. Sequential methods employing a smooth intermediate reference surface were developed to avoid the very large transforms necessary when making computations at high resolution over a wide area. A new method for the numerical solution of Molodensky's problem was developed to mitigate the convergence difficulties that occur at short wavelengths with methods based on a Taylor series expansion. A trial field on a level surface is continued analytically to the topographic surface, and compared with that predicted from gravity observations. The difference is used to compute a correction to the trial field and the process iterated. Special techniques are employed to speed convergence and prevent oscillations. Three different spectral methods for fitting a point-mass set to a gravity field given on a regular grid at constant elevation are described. Two of the methods differ in the way that the spectrum of the point-mass set, which extends to infinite wave number, is matched to that of the gravity field which is band-limited. The third method is essentially a space-domain technique in which Fourier methods are used to solve a set of simultaneous equations.

Harrison, J. C.↗
NASA NTRS1989

Thin-plate spline quadrature of geodetic integrals

Thin-plate spline functions (known for their flexibility and fidelity in representing experimental data) are especially well-suited for the numerical integration of geodetic integrals in the area where the integration is most sensitive to the data, i.e., in the immediate vicinity of the evaluation point. Spline quadrature rules are derived for the contribution of a circular innermost zone to Stoke's formula, to the formulae of Vening Meinesz, and to the recursively evaluated operator L(n) in the analytical continuation solution of Molodensky's problem. These rules are exact for interpolating thin-plate splines. In cases where the integration data are distributed irregularly, a system of linear equations needs to be solved for the quadrature coefficients. Formulae are given for the terms appearing in these equations. In case the data are regularly distributed, the coefficients may be determined once-and-for-all. Examples are given of some fixed-point rules. With such rules successive evaluation, within a circular disk, of the terms in Molodensky's series becomes relatively easy. The spline quadrature technique presented complements other techniques such as ring integration for intermediate integration zones.

Vangysen, Herman↗
NASA NTRS1989

Monte Carlo calculation of dynamical properties of the two-dimensional Hubbard model

A new method is introduced for analytically continuing imaginary-time data from quantum Monte Carlo calculations to the real-frequency axis. The method is based on a least-squares-fitting procedure with constraints of positivity and smoothness on the real-frequency quantities. Results are shown for the single-particle spectral-weight function and density of states for the half-filled, two-dimensional Hubbard model.

White, S. R.↗
NASA NTRS1993

Establishing a relationship between maximum torque production of isolated joints to simulate EVA ratchet push-pull maneuver: A case study

As manned exploration of space continues, analytical evaluation of human strength characteristics is critical. These extraterrestrial environments will spawn issues of human performance which will impact the designs of tools, work spaces, and space vehicles. Computer modeling is an effective method of correlating human biomechanical and anthropometric data with models of space structures and human work spaces. The aim of this study is to provide biomechanical data from isolated joints to be utilized in a computer modeling system for calculating torque resulting from any upper extremity motions: in this study, the ratchet wrench push-pull operation (a typical extravehicular activity task). Established here are mathematical relationships used to calculate maximum torque production of isolated upper extremity joints. These relationships are a function of joint angle and joint velocity.

Pandya, Abhilash↗