SEARCH · Engineering Papers

Results for “airship”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Economics of modern long-haul cargo airships

The economic characteristics and historical trends of long-haul air transportation are discussed. Various published estimates of modern airship direct operating costs are presented and comparatively analyzed. The large discrepancies in these estimates are in large measure explained, allowing airship direct operating costs to be estimated with some confidence. Indirect costs are also briefly discussed. Projected airship operating costs are compared with actual costs of competing modes such as airplanes, trucks, rail, and pipelines, and it is concluded that airships cannot economically compete with other long-haul modes. Thus attention is drawn to short-haul applications of the airship; and because short-haul missions lead to vehicle requirements that are considerably different from those for long-haul missions, it is concluded that the civil airship of the future is likely to bear little resemblance to those of the past.

Ardema, M. D.↗

NASA NTRS1925

Pressure distribution on the nose of an airship in circling flight

In recent tests on the pressures occurring on the envelope and control surfaces of the naval airship C-7, it was noted that the pressures on the nose of the airship, while flying in level circling flight, were symmetrically distributed. Such a condition can only occur when the nose of the airship is pointed directly into the wind, and to accomplish this in circling flight, the axis of the airship must then be parallel to the direction of the motion of the nose. The question was raised as to whether the same conditions occur generally on all airships in circling flight. It appears that airships flying in a constant, level, circling flight path will generally head very closely into the wind, and any deviation will be so slight that the distribution of pressure over the nose will be but slightly, if at all, changed from a symmetrical distribution.

Fairbanks, Karl J↗

NASA NTRS1975

Feasibility study of modern airships, phase 1, volume 1

The history of the airship is examined from a technical and operational/mission point of view. The impact on a modern airship design by present technology is defined in some selected, representative areas through a comparison between 1930 and 1975 state-of-the-art. A survey of missions with a potential for the airship was made and some viable applications are established. Several concepts of modern airships were taken through a parametric design analysis in the missions previously established, evolving in a new configuration of a hybrid airship - the Helipsoid -, combining static lift and dynamic lift from tilting propeller/rotors and the planform. Cruise speeds in the 150-200 kt (77-103 m/s) will be possible with this configuration with reasonable engine power. The Helipsoid offers at the same time a realistic and practicable solution to the ballast problem, which is inherent in a vehicle generating its lift (fully or partially) from a medium lighter than air.

Joner, B.↗

NASA NTRS1975

Mooring and ground handling rigid airships

The problems of mooring and ground handling rigid airships are discussed. A brief history of Mooring and Ground Handling Rigid Airships from July 2, 1900 through September 1, 1939 is included. Also a brief history of ground handling developments with large U. S. Navy nonrigid airships between September 1, 1939 and August 31, 1962 is included wherein developed equipment and techniques appear applicable to future large rigid airships. Finally recommendations are made pertaining to equipment and procedures which appear desirable and feasible for future rigid airship programs.

Walker, H., Jr.↗

NASA NTRS1977

Feasibility of modern airships - Preliminary assessment

Attention is given to the NASA program, Feasibility Study of Modern Airships, initiated to investigate potential research and technology programs associated with airship development. A historical survey of the program is presented, including the development of past airship concepts, aerodynamical and design improvements, structure and material concepts, and research in controls, avionics, instrumentation, flight operations, and ground handling. A mission analysis was carried out which considered passenger and cargo transportation, heavy-lift, short-haul applications, surveillance missions, and the transportation of natural gas. A vehicle parametric analysis examined the entire range of airship concepts, discussing both conventional airships and hybrids. Various design options were evaluated, such as choice of structural materials, use of boundary-layer control, and choice of lifting gas.

Ardema, M. D.↗

NASA NTRS1981

Study of ground handling characteristics of a maritime patrol airship

Mooring concepts appropriate for maritime patrol airship (MPA) vehicles are investigated. The evolution of ground handling systems and procedures for all airship types is reviewed to ensure that appropriate consideration is given to past experiences. A tri-rotor maritime patrol airship is identified and described. Wind loads on a moored airship and the effects of these loads on vehicle design are analyzed. Several mooring concepts are assessed with respect to the airship design, wind loads, and mooring site considerations. Basing requirements and applicability of expeditionary mooring also are addressed.

Source record↗

NASA NTRS2003

Initial Feasibility Assessment of a High Altitude Long Endurance Airship

A high altitude solar powered airship provides the ability to carry large payloads to high altitudes and remain on station for extended periods of time. This study examines the feasibility of this concept. Factors such as time of year, latitude, wind speeds and payload are considered in establishing the capabilities of a given size airship. East and West coast operation were evaluated. The key aspect to success of this type of airship is the design and operation of the propulsion and power system. A preliminary propulsion/power system design was produced based on a regenerative fuel cell energy storage system and solar photovoltaic array for energy production. A modular system design was chosen with four independent power/propulsion units utilized by the airship. Results on payload capacity and flight envelope (latitude and time of year) were produced for a range of airship sizes.

Colozza, Anthony↗

NASA NTRS2012

Radioisotope Stirling Engine Powered Airship for Low Altitude Operation on Venus

The feasibility of a Stirling engine powered airship for the near surface exploration of Venus was evaluated. The heat source for the Stirling engine was limited to 10 general purpose heat source (GPHS) blocks. The baseline airship utilized hydrogen as the lifting gas and the electronics and payload were enclosed in a cooled insulated pressure vessel to maintain the internal temperature at 320 K and 1 Bar pressure. The propulsion system consisted of an electric motor driving a propeller. An analysis was set up to size the airship that could operate near the Venus surface based on the available thermal power. The atmospheric conditions on Venus were modeled and used in the analysis. The analysis was an iterative process between sizing the airship to carry a specified payload and the power required to operate the electronics, payload and cooling system as well as provide power to the propulsion system to overcome the drag on the airship. A baseline configuration was determined that could meet the power requirements and operate near the Venus surface. From this baseline design additional trades were made to see how other factors affected the design such as the internal temperature of the payload chamber and the flight altitude. In addition other lifting methods were evaluated such as an evacuated chamber, heated atmospheric gas and augmented heated lifting gas. However none of these methods proved viable.

Colozza, Anthony J.↗

NASA NTRS1975

Feasibility study of modern airships, phase 1. Volume 2: Parametric analysis (task 3)

Various types of lighter-than-air vehicles from fully buoyant to semibuoyant hybrids were examined. Geometries were optimized for gross lifting capabilities for ellipsoidal airships, modified delta planform lifting bodies, and a short-haul, heavy-lift vehicle concept. It is indicated that: (1) neutrally buoyant airships employing a conservative update of materials and propulsion technology provide significant improvements in productivity; (2) propulsive lift for VTOL and aerodynamic lift for cruise significantly improve the productivity of low to medium gross weight ellipsoidal airships; and (3) the short-haul, heavy-lift vehicle, consisting of a simple combination of an ellipsoidal airship hull and existing helicopter componentry, provides significant potential for low-cost, near-term applications for ultra-heavy lift missions.

Lancaster, J. W.↗

NASA NTRS1975

Evaluation of advanced airship concepts

A historical overview of the airship, technical and operational characteristics of conventional and hybrid concepts, and the results of a parametric design analysis and evaluation are presented. The lift capabilities of certain buoyant fluids for a hypothetical 16 million cu.ft. volume airship are compared. The potential advanced airship concepts are surveyed, followed by a discussion of the six configurations: conventional nonrigid, conventional rigid, Deltoid (Dynairship), Guppoid (Megalifter), Helipsoid, and Heli-Stat. It is suggested that a partially buoyant Helipsoid concept of the optimum buoyancy ratio has the potential to solve the problems facing future airship development, such as Ballast and Ballast Recovery System, Full Low-Speed Controllability, Susceptibility to Wind/Gusting, Weather/Icing Constraints, Ground Handling/Hangaring, and Direct/Indirect Operating Costs.

Joner, B. A.↗

NASA NTRS1975

Airship economics

Projected operating and manufacturing costs of a large airship design which are considered practical with today's technology and environment are discussed. Data and information developed during an 18-month study on the question of feasibility, engineering, economics and production problems related to a large metalclad type airship are considered. An overview of other classic airship designs are provided, and why metalclad was selected as the most prudent and most economic design to be considered in the 1970-80 era is explained. Crew operation, ATC and enroute requirements are covered along with the question of handling, maintenance and application of systems to the large airship.

Neumann, R. D.↗

NASA NTRS1975

Airship construction

Forty-four years ago the first successful metal airship was completed and delivered to the United States Navy, the ZMC-2. Between those years and the present, very little effort or serious consideration has been given to the manufacture, design, construction, or economic impact of airships. It is important to retain and exploit the small but continually diminishing pool of airship talent that will expedite the success of the United States in what is now a pioneering venture. The relative simplicity of airship construction, utilizing the tremendous technical advances of the last 44 years, leads to the conclusion that this form of transportation holds great promise for reducing costs of military missions and improving the international competitive position of the United States in commercial applications.

Roda, J.↗

NASA NTRS1975

The Slate all metal airship

The development of the Slate all metal airship City of Glendale built and completed in 1930 is presented. The airship facilities are discussed. Pertinent data which led to other engineering accomplishments for aviation are shown. The SMD-100 concept is presented along with a brief commentary on the costs and problems involved in such an airship design and the application of the hoisting and elevator facilities to airship development.

Slate, C. C.↗

NASA NTRS1975

State of the art of metalclad airships

Metalclad airship development of the past history are considered along with the immediate prospects for continuation of the development of these airships. The metalclad airships promise high safety even in highly inclement weather, are capable of high speeds, while lifting high useful loads. Metalclad airships which in first cost would compare favorably with the costs of sea-going ships and in operating costs promise to be lower than airplanes.

Pavlecka, V. H.↗

NASA NTRS1975

Roles of airships in economic development

It is proposed that airships of known and tested technology could, in some cases, perform routine transport missions more economically than conventional transport modes. If infrastructure for direct surface transport is already in place or if such infrastructure can be justified by the size of the market and there are no unusual impediments to constructing it, then the airships of tested technology cannot normally compete. If, however, the surface routes would be unusually expensive or circuitous, or if they involve several transhipments, or if the market size is too small to spread infrastructure costs of conventional transport, the airships of tested technology present a workable alternative. A series of special cases are considered. The cases, though unusual, are not unique; there are several similar possible applications which, in total, would provide a reasonably large market for airships.

Beier, G. J.↗

NASA NTRS1921

The Employment of Airships for the Transport of Passengers

It was a conclusion of this detailed study of the practicality of using airships for carrying passengers that, although slow, airships are capable of carrying useful loads over long distances. However, it is noted that there is a certain limit to the advantages of large cubature. Beyond a certain point, the maximum altitude of the airship goes on decreasing, in spite of the fact that the range of action in the horizontal plane and the useful load go on increasing. The possibility of rapid climb is an essential factor of security in aerial navigation in the case of storms, as is velocity. To rise above and run ahead of storms are ways of avoiding them. However, high altitude and high speed are antithetical. This investigation concluded that a maximum velocity of 120 km/h is as far as we ought to go. This figure can only be exceeded by excessive reduction of the altitude of ceiling, range of flight, and useful load. The essential requisites of a public transport service are discussed, as are flight security, regularity of service, competition with other forms of passenger transportation, and the choice between rigid and semi-rigid airships.

Nobile, Umberto↗

NASA NTRS1923

The drag of Zeppelin airships

This report is a discussion of the results of tests with Zeppelin airships, in which the propellers were stopped as quickly as possible while the airship was in full flight. In this paper the author refers to the theory involved in these tests and calls attention to one scientifically interesting fact which can be derived from the tests and which has not yet been noted. The most important question concerning the tests is, of course: does the negative acceleration of an airship with stopped propellers supply proper data for determining the drag of the airship when in uniform flight? This can not be absolutely answered, however, except that in this particular case the agreement is sufficient and that the data obtained from the test are the true quantities, or, at least, the approximate quantities wanted.

Munk, Max M↗

NASA NTRS1925

Determination of Turning Characteristics of an Airship by Means of a Camera Obscura

This investigation was carried out by the National Advisory Committee at Langley Field for the purpose of determining the adaptability of the camera obscura to the securing of turning characteristics of airships, and also of obtaining some of those characteristics of the C-7 airship. The method consisted in flying the airship in circling flight over a camera obscura and photographing it at known time intervals. The results show that the method used is highly satisfactory and that for the particular maneuver employed the turning diameter is 1,240 feet, corresponding to a turning coefficient of 6.4, and that the position of zero angle of yaw is at the nose of the airship.

Crowley, J W , Jr↗