SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This document is a system administrator guide for the Watchmen tool. It describes how system administrator should install the application components and configure the host system.
This document is a system administrator guide for the Watchmen tool. It describes how system administrator should install the application components and configure the host system.
The State Analysis Database Tool software establishes a productive environment for collaboration among software and system engineers engaged in the development of complex interacting systems. The tool embodies State Analysis, a model-based system engineering methodology founded on a state-based control architecture (see figure). A state represents a momentary condition of an evolving system, and a model may describe how a state evolves and is affected by other states. The State Analysis methodology is a process for capturing system and software requirements in the form of explicit models and states, and defining goal-based operational plans consistent with the models. Requirements, models, and operational concerns have traditionally been documented in a variety of system engineering artifacts that address different aspects of a mission s lifecycle. In State Analysis, requirements, models, and operations information are State Analysis artifacts that are consistent and stored in a State Analysis Database. The tool includes a back-end database, a multi-platform front-end client, and Web-based administrative functions. The tool is structured to prompt an engineer to follow the State Analysis methodology, to encourage state discovery and model description, and to make software requirements and operations plans consistent with model descriptions.
The Problem Reporting System (PRS) is a Web application, running on two Web servers (load-balanced) and two database servers (RAID-5), which establishes a system for submission, editing, and sharing of reports to manage risk assessment of anomalies identified in NASA's flight projects. PRS consolidates diverse anomaly-reporting systems, maintains a rich database set, and incorporates a robust engine, which allows tracking of any hardware, software, or paper process by configuring an appropriate life cycle. Global and specific project administration and setup tools allow lifecycle tailoring, along with customizable controls for user, e-mail, notifications, and more. PRS is accessible via the World Wide Web for authorized user at most any location. Upon successful log-in, the user receives a customizable window, which displays time-critical 'To Do' items (anomalies requiring the user s input before the system moves the anomaly to the next phase of the lifecycle), anomalies originated by the user, anomalies the user has addressed, and custom queries that can be saved for future use. Access controls exist depending on a user's role as system administrator, project administrator, user, or developer, and then, further by association with user, project, subsystem, company, or item with provisions for business-to-business exclusions, limitations on access according to the covert or overt nature of a given project, all with multiple layers of filtration, as needed. Reporting of metrics is built in. There is a provision for proxy access (in which the user may choose to grant one or more other users to view screens and perform actions as though they were the user, during any part of a tracking life cycle - especially useful during tight build schedules and vacations to keep things moving). The system also provides users the ability to have an anomaly link to or notify other systems, including QA Inspection Reports, Safety, GIDEP (Government-Industry Data Exchange Program) Alert, Corrective Actions, and Lessons Learned. The PRS tracking engine was designed as a very extensible and scalable system, able to support additional applications, with future development possibilities already discussed, including Incident Surprise Anomalies (for anomalies occurring during Operations phases of NASA Flight projects), GIDEP and NASA Alerts, and others.
For ships at sea. satellites provide the only option for high data rate (HDR), long haul communications. Furthermore the demand for HDR satellite communications (SATCOM) for military and commercial ships. and other offshore platforms is increasing. Presently the bulk of this maritime HDR SATCOM connectivity is provided via C-band and X-band. However, the shipboard antenna sizes required to achieve a data rate of, say T 1 (1.544 Mbps) with present C-/X-band SATCOM systems range from seven to ten feet in diameter. This limits the classes of ships to which HDR services can be provided to those which are large enough to accommodate the massive antennas. With its high powered K/Ka-band spot beams, the National Aeronautics and Space Administration's (NASA) Advanced Communications Technology Satellite (ACTS) was able to provide T I and higher rate services to ships at sea using much smaller shipboard antennas. This paper discusses three shipboard HDR SATCOM demonstrations that were conducted with ACTS between 1996 and 1998. The first demonstration involved a 2 Mbps link provided to the seismic survey ship MN Geco Diamond equipped with a 16-inch wide, 4.5-inch tall, mechanically steered slotted waveguide array antenna developed by the Jet Propulsion Laboratory. In this February 1996 demonstration ACTS allowed supercomputers ashore to process Geco Diamond's voluminous oceanographic seismic data in near real time. This capability allowed the ship to adjust its search parameters on a daily basis based on feedback from the processed data, thereby greatly increasing survey efficiency. The second demonstration was conducted on the US Navy cruiser USS Princeton (CG 59) with the same antenna used on Geco Diamond. Princeton conducted a six-month (January-July 1997) Western Hemisphere solo deployment during which time T1 connectivity via ACTS provided the ship with a range of valuable tools for operational, administrative and quality-of-life tasks. In one instance, video teleconferencing (VTC) via ACTS allowed the ship to provide life-saving emergency medical aid, assisted by specialists ashore. to a fellow mariner - the Master of a Greek cargo ship. The third demonstration set what is believed to be the all-time SATCOM data rate record to a ship at sea, 45 Mbps in October 1998. This Lake Michigan (Chicago area) demonstration employed one of ACTS' fixed beams and involved the smallest of the three vessels, the 45-foot Bayliner M/V Entropy equipped with a modified commercial-off-the-shelf one-meter antenna. A variety of multi-media services were provided to Entropy through a stressing range of sea states. These three demonstrations provided a preview of the capabilities that could be provided to future mariners on a more routine basis when K/Ka-band SATCOM systems are widely deployed.
The National Aeronautics and Space Administration Dryden Flight Research Center has developed a FORTRAN-based object-oriented optimization (O3) tool that leverages existing tools and practices and allows easy integration and adoption of new state-of-the-art software. The object-oriented framework can integrate the analysis codes for multiple disciplines, as opposed to relying on one code to perform analysis for all disciplines. Optimization can thus take place within each discipline module, or in a loop between the central executive module and the discipline modules, or both. Six sample optimization problems are presented. The first four sample problems are based on simple mathematical equations; the fifth and sixth problems consider a three-bar truss, which is a classical example in structural synthesis. Instructions for preparing input data for the O3 tool are presented.
Urban air mobility (UAM) vehicles are anticipated to operate in close proximity to the public. A possible barrier to the introduction of UAM vehicles as a transit solution is their community noise impact, particularly around vertiports. The Federal Aviation Administration Aviation Environmental Design Tool (AEDT) is the mandated tool to assess aircraft noise and other environmental impacts due to federal actions at civilian airports, vertiports, or in U.S. airspace for commercial flight operations. However, AEDT was designed to model fixed-wing aircraft and conventional helicopter operations, not UAM vehicles. Prior work by the authors showed significant differences in noise contours of UAM departures and approaches when modeling operations as fixed-wing and helicopter types in AEDT. This paper identifies the sources of those differences. Additionally, a NASA time-marching simulation tool is used to generate noise exposure predictions for equivalent operations to help identify differences associated with the noise model implemented in AEDT and offer possible changes to assess UAM community noise impact more consistently with simulation-based modeling.
Urban air mobility (UAM) vehicles are anticipated to operate in close proximity to the public. A possible barrier to the introduction of UAM vehicles as a transit solution is their community noise impact, particularly around vertiports. The Federal Aviation Administration Aviation Environmental Design Tool (AEDT) is the mandated tool to assess aircraft noise and other environmental impacts due to federal actions at civilian airports, vertiports, or in U.S. airspace for commercial flight operations. However, AEDT was designed to model fixed-wing aircraft and conventional helicopter operations, not UAM vehicles. Prior work by the authors showed significant differences in noise contours of UAM departures and approaches when modeling operations as fixed-wing and helicopter types in AEDT. This paper identifies the sources of those differences. Additionally, a NASA time-marching simulation tool is used to generate noise exposure predictions for equivalent operations to help identify differences associated with the noise model implemented in AEDT and offer possible changes to assess UAM community noise impact more consistently with simulation-based modeling.
The Weapons Research Services (WRS) Division provides Los Alamos National Laboratory with services, resources, and staff that are critical to fulfilling its national security mission. WRS serves the entire LANL Weapons Program and is housed within the Weapons Physics Directorate (ALDX), which is at the core of the design, certification, and assessment of the nation’s nuclear weapons. More specifically, WRS is a research and development organization that provides unique tools designed to meet the specific needs of the Lab’s weapons mission rather than administrative or Information & Technology (IT) tools used broadly by the Lab. WRS partners with other LANL organizations, including Global Security to conduct mission research and I&T organizations to meet basic IT infrastructure needs.
Utilizing the concepts and terminology from Project Management, the process of planning and executing a Change Management (CM) Infrastructure improvement project is described. The primary audience for this presentation includes both experienced and relatively new CM administrators and their managers. It also includes anyone with an interest in the application of project management knowledge to CM administration. There are several benefits: the complexity of the CM tool technology is more manageable, CM administrators get to use project management knowledge to complete a project (not "firefighting"), improve relations with your customers (that means developers and managers), and get the opportunity to do it again.
Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in airspace similar to Transport Category Rotorcraft, requiring them to meet stringent requirements for High-Intensity Radiated Fields (HIRF) certification. The environment is notably severe, particularly compared to fixed-wing aircraft, due to operations at lower altitudes. This potentially exposes the vehicles to high-power transmitters on the ground, leading to significant challenges. High-level HIRF exposure can result in avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF pose significant barriers concerning size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel HIRF protection approach, aiming to reduce costs by certifying vehicles to a "vehicle tolerance level" lower than that required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources. This distance is calculated based on the vehicle's tolerance level and transmitter characteristics, such as transmit power, antenna beamwidth, and direction. Tailored flight maps are developed to identify transmitters and avoidance zones within an operating area or along a flight path, enabling restricted vehicle operations. Vehicles with higher tolerance levels could have smaller HIRF avoidance zones, allowing them to operate closer to transmitters. Transmitter data are sourced from government databases, such as those of the Federal Communications Commission (FCC) and the National Oceanic and Atmospheric Administration (NOAA). A map tool is developed using Matlab to calculate and visualize HIRF avoidance zones based on available databases. The tool determines stand-off distances based on input vehicle tolerance levels, displaying results on various base maps depicting HIRF-restricted areas. Illustrations cover various FCC transmitters, including AM/FM/TV transmitters, satellite earth stations, and NOAA weather radars. The HIRF zones of smaller transmitters, such as land-mobile radios, pagers, microwave links, and cellular towers, are also illustrated. An example of flight planning around transmitters is provided. For now, airports and government-owned lands are excluded due to limited access to sensitive transmitter data. Despite this approach, a minimum HIRF tolerance level for vehicles may still be necessary to cover mobile devices, cellular base stations, transmitters on other AAM vehicles, and other small power devices not included in the FCC databases. The paper discusses findings and areas for improving existing databases and suggests an approach for better access to sanitized data in more restricted government databases. This method significantly deviates from the standard approach and introduces slightly higher flight-planning complexity. However, the potential cost savings are considerable. Future AAM/UAM/UAS aeronautical charts could potentially incorporate these new HIRF avoidance zones. Keywords—HIRF; Map; AAM; UAM; UAS; Advanced Air Mobility; Urban Air Mobility; Unmanned Aerial Systems; Certification.
The Surface Management System (SMS) developed by NASA Ames Research Center in coordination with the Federal Aviation Administration (FAA) is a decision support tool to help tower traffic coordinators and Ground/Local controllers in managing and controlling airport surface traffic in order to increase capacity, efficiency, and flexibility. SMS provides common situation awareness to personnel at various air traffic control facilities such as airport traffic control towers (ATCT s), airline ramp towers, Terminal Radar Approach Control (TRACON), and Air Route Traffic Control Center (ARTCC). SMS also provides a traffic management tool to assist ATCT traffic management coordinators (TMCs) in making decisions such as airport configuration and runway load balancing. The Build 1 of the SMS tool was installed and successfully tested at Memphis International Airport (MEM) and received high acceptance scores from ATCT controllers and coordinators, as well as airline ramp controllers. NASA Ames Research Center continues to develop SMS under NASA s Strategic Airspace Usage (SAU) project in order to improve its prediction accuracy and robustness under various modeling uncertainties. This paper reports the recent development effort performed by the NASA Ames Research Center: 1) integration of Center TRACON Automation System (CTAS) capability with SMS and 2) an alternative approach to obtain airline gate information through a publicly available website. The preliminary analysis results performed on the air/surface traffic data at the DFW airport have shown significant improvement in predicting airport arrival demand and IN time at the gate. This paper concludes with recommendations for future research and development.
Vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses second-generation developments to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed to add broadband self noise into computed noise-power-distance data, and vertiport-centric operations were evaluated for two concept vehicles.
The Navajo Nation (NN) is the largest reservation in the US, and faces challenges related to water management during long-term and widespread drought episodes. The Navajo Nation is a federally recognized tribe, which has boundaries within Arizona, New Mexico, and Utah. The Navajo Nation has a land area of over 70,000 square kilometers. The Navajo Nation Department of Water Resources (NNDWR) reports on drought and climatic conditions through the use of regional Standardized Precipitation Index (SPI) values and a network of in-situ rainfall, streamflow, and climate data. However, these data sources lack the spatial detail and consistent measurements needed to provide a coherent understanding of the drought regime within the Nation's regional boundaries. This project, as part of NASA's Western Water Applications Office (WWAO), improves upon the recently developed Drought Severity Assessment Tool (DSAT) to ingest satellite-based precipitation data to generate SPI values for specific administrative boundaries within the reservation. The tool aims to: (1) generate SPI values and summary statistics for regions of interest on various timescales, (2) to visualize SPI values within a web-map application, and (3) produce maps and comparative statistical outputs in the format required for annual drought reporting. The co-development of the DSAT with NN partners is integral to increasing the sustained use of Earth Observations for water management applications. This tool will provide data to support the NN in allocation of drought contingency dollars to the regions most adversely impacted by declines in water availability.
In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses the initial development of a method to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed using fixed-point flight profiles and user-supplied noise data in a manner that avoids unwanted behavior in AEDT. A set of 32 routes in the Dallas-Ft. Worth area were assessed for single and multiple (fleet) operations for two concept vehicles.
In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses the initial development of a method to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed using fixed-point flight profiles and user-supplied noise data in a manner that avoids unwanted behavior in AEDT. A set of 32 routes in the Dallas-Ft. Worth area were assessed for single and multiple (fleet) operations for two concept vehicles.
During the past decade, the National Aeronautics and Space Administration (NASA) has been developing and evaluating a suite of decision support tools (DSTs) to aid the air traffic controller in the management of traffic. These tools are known collectively as the Center/TRACON Automation System (CTAS). The primary focus of CTAS is increased capacity. As part of a new NASA program called Quiet Aircraft Technology (QAT), the following question is being addressed: Can CTAS technology also support the noise mitigation requirements imposed by the community? Controllers currently support a variety of low noise procedures in low traffic densities but, as traffic increases, these must be abandoned due to excessive spacing requirements for vectoring or inter-arrival spacing requirements needed to handle a spectrum of low noise procedures. NASA is currently investigating how to provide controllers with noise-mitigation-based advisories which address these issues without negatively impacting capacity. These issues are of global concern which must be addressed as the demand for air travel continues to increase.