Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Evidence of topological charge polarization at active-passive interfaces in acoustically powered active liquid crystals

Theoretical and computational studies predict topological charge separation at active-passive interfaces in active nematics, but reliable experimental validation has been lacking. We utilize a synthetic acoustically energized liquid crystal to experimentally investigate the dynamics of topological defects across an active-passive interface. The interference pattern induced by the acoustic wave inside the experimental cell creates a spatial distribution of activity, resulting in the formation of active-passive interfaces with the liquid-crystalline director field aligned parallel to those interfaces. The activity gradient drives the reorientation of positively charged topological defects along its direction, causing them to migrate into the passive zone and form a layer with net topological charge. That layer “discharges” upon cessation of activity through annihilation of positive and negative topological charges, resembling the discharge of a capacitor.

Active defects↗
DOE OSTI2021

Activity of Cu-Al-oxo extra-framework clusters for selective methane oxidation on Cu exchanged zeolites

Cu-zeolites are able to directly convert methane to methanol via a 3-step process using O2 as oxidant. Among the different zeolite topologies, Cu-exchanged mordenite (MOR) shows the highest methanol yields, attributed to a preferential formation of active Cu-oxo species in its 8-MR pores. The presence of extra-framework or partially detached Al species entrained in the micropores of MOR leads to the formation of nearly homotopic redox active Cu-Al-oxo nanoclusters with the ability to activate CH4. Studies of the activity of these sites together with characterization by 27Al NMR and IR spectroscopy leads to the conclusion that the active species are located in the 8-MR side pockets of MOR and it consists of two Cu ions and one Al linked by O. This Cu-Al oxo cluster shows an activity per Cu in methane oxidation significantly higher than of any previ-ously reported active Cu-oxo species. In order to determine unambiguously the structure of the active Cu-Al-oxo cluster, we combine experimental XANES of Cu K- and L- edges, Cu K-edge HERFD-XANES and Cu K-edge EXAFS with TDDFT and AIMD-assisted simulations. Our results provide evidence of a [Cu2AlO3]2+ cluster exchanged on MOR Al pairs that is able to oxidize up to two methane molecules per cluster at ambient pressure.

Methane oxidation, Cu L3-edge XANES, HERFD, TDDFT,↗
DOE OSTI2020

Continental-scale patterns of extracellular enzyme activity in the subsoil: an overlooked reservoir of microbial activity

Abstract Chemical stabilization of microbial-derived products such as extracellular enzymes (EE) onto mineral surfaces has gained attention as a possibly important mechanism leading to the persistence of soil organic carbon (SOC). While the controls on EE activities and their stabilization in the surface soil are reasonably well-understood, how these activities change with soil depth and possibly diverge from those at the soil surface due to distinct physical, chemical, and biotic conditions remains unclear. We assessed EE activity to a depth of 1 m (10 cm increments) in 19 soil profiles across the Critical Zone Observatory Network, which represents a wide range of climates, soil orders, and vegetation types. For all EEs, activities per mass of soil correlated positively with microbial biomass (MB) and SOC, and all three of these variables decreased logarithmically with depth ( p < 0.05). Across all sites, over half of the potential EE activities per mass soil consistently occurred below 20 cm for all measured EEs. Activities per unit MB or SOC were substantially higher at depth (soils below 20 cm accounted for 80% of whole-profile EE activity), suggesting an accumulation of stabilized (i.e. mineral sorbed) EEs in subsoil horizons. The pronounced enzyme stabilization in subsurface horizons was corroborated by mixed-effects models that showed a significant, positive relationship between clay concentration and MB-normalized EE activities in the subsoil. Furthermore, the negative relationships between soil C, N, and P and C-, N-, and P-acquiring EEs found in the surface soil decoupled below 20 cm, which could have also been caused by EE stabilization. This finding suggests that EEs may not reflect soil nutrient availabilities deeper in the soil profile. Taken together, our results suggest that deeper soil horizons hold a significant reservoir of EEs, and that the controls of subsoil EEs differ from their surface soil counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ancient origins of allosteric activation in a Ser-Thr kinase

A myriad of cellular events are regulated by allostery; therefore, evolution of this process is of fundamental interest. Here, we use ancestral sequence reconstruction to resurrect ancestors of two colocalizing proteins, Aurora A kinase and its allosteric activator TPX2 (targeting protein for Xklp2), to experimentally characterize the evolutionary path of allosteric activation. Autophosphorylation of the activation loop is the most ancient activation mechanism; it is fully developed in the oldest kinase ancestor and has remained stable over 1 billion years of evolution. As the microtubule-associated protein TPX2 appeared, efficient kinase binding to TPX2 evolved, likely owing to increased fitness by virtue of colocalization. Subsequently, TPX2-mediated allosteric kinase regulation gradually evolved. Surprisingly, evolution of this regulation is encoded in the kinase and did not arise by a dominating mechanism of coevolution.

Science & Technology - Other Topics↗
DOE OSTI2021

Electrochemically active surface area controls HER activity for Fe x Ni 100–x films in alkaline electrolyte

We report the synthesis and electrocatalytic activity of Fe x Ni 100-x electrochemically deposited films were investigated. Films were evaluated for the hydrogen evolution reaction (HER) in alkaline media with respect to composition and electrochemically active surface area (ECSA). Results demonstrate that films of higher or equal Fe content had an ECSA tenfold greater than films with higher Ni. When normalized by geometric surface area, Fe 50 Ni 50 films required the lowest overpotential of -390 mV to reach a current density of -10 mA cm -2 . However, when normalized by the ECSA, intrinsic HER activity increases as Ni content increases. Tafel slope, ECSA, microscopy, and impedance spectroscopy analyses allow a decoupled analysis of surface area versus activity effects on overall measured HER activity. Furthermore, these analyses collectively demonstrate that the increase in electrocatalytic activity is attributed to the increase in ECSA and not to an enhancement in the intrinsic activity by Fe and Ni component interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗
DOE OSTI2021

Economizing on Precious Metals in Three-Way Catalysts: Thermally Stable and Highly Active Single-Atom Rhodium on Cera for NO Abatement under Dry and Industrially Relevant Conditions

We show for the first time that atomically dispersed Rh cations on ceria, prepared via high-temperature atom trapping synthesis, are the active species for (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh(I) complexes capable of catalyzing dry (CO+NO) reaction but without the stability concern. In particular, thermally stable Rh cations in 0.1wt% Rh1/CeO2 achieve full NO conversion with a TOF of ~ 330 hr-1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N2 with N2O being the minor product. The presence of water promotes low-temperature activity of 0.1wt% Rh1/CeO2 starting at 50 °C with full NO conversion at ~120 °C. In the case with the wet stream, however, ammonia and nitrogen are the main products with only minor N2O amounts. NH3 formation at such low temperatures is attractive because of the potential to use this as a passive SCR system. Because of the uniformity of Rh ions on the support, we are able to observe the intermediates of (CO+NO) reaction via infrared measurements on Rh cations on zeolite and ceria. Furthermore, we show that ammonia formation correlates with the WGS activity of the material and thus, rhodium hydride Rh-H species are involved in this reaction: we detect Rh(CO)Hx species on ceria using isotopic IR measurements. These findings provide new mechanistic understanding for the catalytically active species in TWC catalysis and open up a new avenue for the synthesis of novel emissions control catalysts with 100% atom economy of ultra-expensive precious metals such as Rh.

Khivantsev, Konstantin↗
DOE OSTI2022

Understanding the Surface Structure and Catalytic Activity of SnO x /Au(111) Inverse Catalysts for CO 2 and H 2 Activation

Carbon dioxide hydrogenation is a promising approach for the reduction of greenhouse gas pollution via the production of fuels and high-value chemicals utilizing C1 chemistry. In this process, the activation of nonpolar molecules, CO 2 and H 2 , at mild conditions is challenging. In this study, we report a well-defined inverse SnO x /Au(111) catalyst that shows the ability to activate both CO 2 and H 2 at room temperature. Scanning tunneling microscopy (STM) and ambient pressure X-ray photoemission spectroscopy (AP-XPS) are combined to understand the surface structure, growth mode, chemical state, and activity of SnO x /Au(111) surfaces. Nanostructures of SnO x at the sub-monolayer level were prepared by depositing Sn on Au(111) followed by O 2 oxidation. For the as-prepared SnO x /Au(111), two-dimensionally formed SnO x thin films on a Au(111) substrate were observed with STM of two different moieties, discernible based on their height: clusters (~0.4 Å) and nanoparticles (NPs, 1–2.5 Å), which are assigned to Sn–Au alloys and SnO x , respectively, in corroboration with XPS analysis. Furthermore, SnO x /Au(111) was annealed under UHV to test its thermal stability. Upon annealing at 400–600 K, a disappearance of SnO x NPs and reappearance of highly dispersed Sn clusters were clearly noticeable from the STM and XPS results, identifying the thermal decomposition of SnO x and subsequent formation of Sn–Au alloys on the surface due to the recombination of Sn clusters with Au. We investigated the reactivity of the SnO x /Au(111) surfaces toward CH 4 , CO 2 , and H 2 . The SnO x /Au(111) surfaces have excellent CO 2 and H 2 activation abilities even at room temperature with negligible reactivity for methane activation. Our AP-XPS results show that H 2 can be activated on the SnO x NPs by the reduction to Sn. For CO 2 , the activation and further dissociation are identified by a reoxidation of Sn with newly formed Sn–O bonds and the formation of surface carbon. Therefore, we propose that SnO x is a potential catalyst or additive to achieve CO 2 hydrogenation under mild conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

LixNiO/Ni Heterostructure with Strong Basic Lattice Oxygen Enables Electrocatalytic Hydrogen Evolution with Pt-like Activity

The low-cost hydrogen production from water electrolysis is crucial for practical deployment of sustainable hydrogen economy, but is often constrained by the lack of active and robust electrocatalysts from Earth-abundant materials. We describe here an unconventional heterostructure composed of strongly coupled Ni-deficient LixNiO nanoclusters and polycrystalline Ni nanocrystals, and its exceptional activities toward hydrogen evolution reaction (HER) in aqueous electrolytes. The presence of unique lattice oxygen species with strong Brønsted basicity is a significant feature, which spontaneously split water molecules and effectively accelerate the sluggish Volmer H-OH dissociation step in neutral and alkaline HER. In combination with the unpreceded level of intimate LixNiO and Ni interfacial junctions that produces abundant “hotspots” for promoted hydride coupling, the catalyst exhibited kinetic activities almost identical as Pt/C and decent long term stability in universal pH.

Lu, Ke↗
DOE OSTI2023

Computational Screening of Supported Metal Oxide Nanoclusters for Methane Activation: Insights into Homolytic versus Heterolytic C–H Bond Dissociation

Since its discovery in zeolites, the [CuOCu] 2+ motif has played an important role in our understanding of selective methane activation over supported metal oxide nanoclusters. Although there are two known C-H bond dissoci-ation mechanisms, namely homolytic and heterolytic cleavage, most computational studies on optimizing metal oxide nanoclusters for improved methane activation reactivity have focused only on the homolytic mechanism. In this work, both mechanisms were examined for a set of 21 mixed metal oxide complexes of the form of [M 1 OM 2 ] 2+ (M 1 , M 2 = Mn, Fe, Co, Ni, Cu, Zn). Except for pure copper, heterolytic cleavage was found to be the dominant C-H bond activation pathway for all systems. Furthermore, mixed systems including [CuOMn] 2+ , [CuONi] 2+ , and [CuOZn] 2+ are predicted to possess similar methane activation activity as pure [CuOCu] 2+ . Furthermore, these results suggest that both homolytic and heterolytic mechanisms should be considered in computing methane activation energies on supported metal oxide nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Activity coefficient acquisition with thermodynamics–informed active learning for phase diagram construction

This work explores the use of thermodynamics-informed Gaussian processes (GPs) and active learning (AL) to model activity coefficients and construct phase diagrams. Relying on synthetic data generated from an excess Gibbs energy model, GPs were found to accurately describe the activity coefficients of several binary mixtures across large composition and temperature ranges. Moreover, GPs could estimate their own uncertainty and identify composition/temperature regions where activity coefficient data provide the most information to the models. This was leveraged to build AL algorithms targeted at modeling phase equilibria. In many cases, a single active-learning-acquired data point was sufficient to describe the phase diagrams studied. Lastly, the ability of AL to greatly reduce the amount of data needed to obtain accurate models was further verified on experimental case studies, namely individual ion activity coefficients, the solid–liquid and vapor–liquid equilibrium of deep eutectic solvents, and phase equilibria in ternary mixtures.

25 ENERGY STORAGE↗
DOE OSTI2023

Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C 6 H 8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity

Abstract A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3‐methylpentyl (H 2 L 2 ) and cyclohexyl (H 2 L 3 ) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL 2a/3a have two imino N and two S donors resulting in three five‐member chelate rings (555 isomers). The kinetic isomers CuL 2b/3b have one imino and one hydrazino N donor and two S donors resulting in four‐, six‐, and five‐member rings (465 isomers). The 555 isomers have more accessible Cu II/I potentials (E 1/2 =−811/−768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E 1/2 =−923/‐854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR‐90) using the MTT assay. CuL 2a was potent ( A549 EC 50 =0.080 μM) and selective ( IMR‐90 EC 50 / A549 EC 50 =25) for A549. Its linkage isomer CuL 2b had equivalent A549 activity, but lower selectivity ( IMR‐90 EC 50 / A549 EC 50 =12.5). The isomers CuL 3a and CuL 3b were less potent with A549 EC 50 values of 1.9 and 0.19 M and less selective with IMR‐90 EC 50 / A549 EC 50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.

Chemistry↗
DOE OSTI2024

Trace Fe activates perovskite nickelate OER catalysts in alkaline media via redox-active surface Ni species formed during electrocatalysis

The accurate description of activity trends among perovskite-oxide oxygen-evolution-reaction (OER) catalysts using electronic-structure descriptors requires that the bulk structure of the catalyst is comparable to that of the surface. Few studies have addressed the dynamic nature of the catalyst's structure during the OER and the consequential implications for understanding activity. Here, we use a combination of electrochemical and materials-characterization techniques to study the surface reconstruction and the associated formation of a new redox-active phase on LaNiO 3 particles, LaNiO 3 epitaxial films, and an analogous Ruddlesden-Popper phase, La 2 NiO 4 . Small, but characteristic, redox features corresponding to Ni redox in nominally amorphous NiO x H y are observed during cyclic voltammetry of these initially fully crystalline materials. The size of these redox features grows with prolonged cycling and contributes to an increased surface area as determined from electrochemical impedance spectroscopy (EIS). Here we find the OER activity is strongly dependent on soluble Fe species in the electrolyte, common impurities in alkaline media. These observations are consistent with the reconstruction of the crystalline surface to form NiO x H y species and subsequent activation by adsorption of Fe forming the well-known and extremely active NiFeO x H y OER catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dioxygen Activation Kinetics over Distinct Cu Site Types in Cu-Chabazite Zeolites

Cu-exchanged zeolites activate dioxygen to form active sites for partial methane oxidation (PMO), nitrogen oxide decomposition, and carbon monoxide oxidation. Apparent rates of O 2 activation depend both on the intrinsic kinetics of distinct Cu site types and the distributions of such sites within a given zeolite, which depend on the density and arrangement of the framework Al atoms. In this work, we use hydrothermal synthesis methods to control the arrangement of framework Al sites in chabazite (CHA) zeolites and, in turn, the distinct Cu site types formed. Time-resolved in situ Raman spectroscopy reveals the kinetics of O 2 adsorption and activation within these well-defined Cu-CHA materials and the concomitant structural evolution of copper–oxygen (Cu x O y ) complexes, which are interpreted alongside Cu(I) oxidation kinetics extracted from in situ X-ray absorption spectroscopy (XAS). Raman spectra of several plausible Cu x O y species simulated using density functional theory suggest that experimental spectra (λ ex = 532 nm) capture the formation of mono(μ-oxo)dicopper species (ZCuOCuZ). Transient experiments show that the timescales required to form Cu x O y structures that no longer change in Raman spectra correspond to the durations of oxidative treatments that maximize CH 3 OH yields in stoichiometric PMO cycles (approximately 2 h). Yet, these periods extend well beyond the timescales for the complete conversion of the initial Cu(I) intermediates to their Cu(II) states (<0.3 h, reflected in X-ray absorption near edge spectroscopy spectra), which demonstrates that Cu x O y complexes continue to evolve structurally following rapid Cu(I) oxidation. The dependence of ZCuOCuZ formation rates on O 2 pressure, H 2 O pressure, and temperature is consistent with a mechanism in which ZCuOH reduces to form ZCu + sites that bind molecular oxygen and form ZCu-O 2 intermediates. Subsequent reaction with proximate ZCu + forms bridging peroxo dicopper complexes that cleave O–O bonds to form ZCuOCuZ in steps facilitated by water. These data and interpretations provide evidence for the chemical processes that link rapid and kinetically irrelevant Cu oxidation steps (frequently probed by XAS and UV–vis spectroscopy) to the relatively slow genesis of reactive Cu complexes that form CH 3 OH during PMO. In doing so, we reveal previously unrecognized complexities in the processes by which Cu ions in zeolites activate O 2 to form active Cu x O y complexes, which underscore the insight afforded by judicious combinations of experimental and theoretical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗