SEARCH · Engineering Papers

Results for “YP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

29 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2024

An integrated EOS, pore‐crush, strength and damage model framework for near‐field ground‐shock

Abstract An integrated Equation of State (EOS) and strength/pore‐crush/damage model framework is provided for modeling near to source (near‐field) ground‐shock response, where large deformations and pressures necessitate coupling EOS with pressure‐dependent plastic yield and damage. Nonlinear pressure‐dependence of strength up to high‐pressures is combined with a Modified Cam‐Clay‐like cap‐plasticity model in a way to allow degradation of strength from pore‐crush damage, what we call the “Yp‐Cap” model. Nonlinear hardening under compaction allows modeling the crush‐out of pores in combination with a fully saturated EOS, that is, for modeling partially saturated ground‐shock response, where air‐filled voids crush. Attention is given to algorithmic clarity and efficiency of the provided model, and the model is employed in example numerical simulations, including finite element simulations of underground explosions to exemplify its robustness and utility.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Conversion of High-Solids Hydrothermally Pretreated Bioenergy Sorghum to Lipids and Ethanol Using Yeast Cultures

Glucose and xylose are the major sugars in cellulosic hydrolysates. The cellulosic sugars can be used for the production of biofuels and value-added bioproducts. In this study, lipid and ethanol were produced from bioenergy sorghum syrups using engineered yeasts. Here, bioenergy sorghum was hydrothermally pretreated at 50% solids loading in a continuous reactor system and mechanically refined sequentially using a burr mill to improve biomass accessibility for hydrolysis. Fed-batch enzymatic hydrolysis was conducted with 50% w/v solids loading to achieve 230 g/L sugar concentration. Different strains of Rhodosporidium toruloides were used to ferment sugars into lipids, and the highest lipid yield of 9.2 g/L was observed. The lipid yield was improved to 19.0 g/l by implementing a two-stage culture where once the sugars were exhausted in the first stage, the yeast was introduced into fresh hydrolysate without adding nitrogen. For ethanol production, the engineered Saccharomyces cerevisiae SR8ΔADH6 was utilized to coferment glucose and xylose. Additionally, the effects of nutrient media (YP, YNB/urea, and urea), cellulosic sugar concentration, and sulfite addition were investigated to optimize the ethanol yield from sorghum syrups. The optimal ethanol yield at 73.3% was obtained from the YNB/urea culture consisting of 34 g glucose/L and 17 g xylose/L.

09 BIOMASS FUELS↗

DOE OSTI2021

Improving helium abundance determinations with Leo P as a case study

Currently, the primordial helium abundance is best estimated through spectroscopic observations of H II regions in metal-poor galaxies. However these determinations are limited by several systematic uncertainties which ultimately limit our ability to accurately ascertain the primordial abundance. In this study, we improve the methodologies for solving for the reddening, the emission contributions from collisional excitation of the H I atoms, the effects underlying absorption in the H I and He I emission lines, and the treatment of the blended H I and He I emission at λ3889 with the aim of lowering the systematic uncertainties in helium abundance determinations. To apply these methods, we have obtained observations of the He I λ10830 emission line in the brightest H II region in the extremely metal-poor (3% Z ⊙ ) galaxy Leo P with the LUCI1 instrument on the LBT. We combine this measurement with previous MODS/LBT observations to derive an improved helium abundance. In doing so, our present analysis results in a decrease in the uncertainty in the helium abundance of Leo P by approximately 70%. Furthermore, this result is combined with data from other observations to estimate the primordial helium mass fraction, Yp= 0.2453 ± 0.0034.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Probing physics beyond the standard model: limits from BBN and the CMB independently and combined

We present new Big Bang Nucleosynthesis (BBN) limits on the cosmic expansion rate or relativistic energy density, quantified via the number N ν of equivalent neutrino species. We use the latest light element observations, neutron mean lifetime, and update our evaluation for the nuclear rates d + d → 3 He + n and d + d → 3 H+p. Combining this result with the independent constraints from the cosmic microwave background (CMB) yields tight limits on new physics that perturbs N ν and η prior to cosmic nucleosynthesis: a joint BBN+CMB analysis gives N ν = 2.898 ± 0.141, resulting in N ν < 3.180 at 2σ. We apply these limits to a wide variety of new physics scenarios including right-handed neutrinos, dark radiation, and a stochastic gravitational wave background. The strength of the independent BBN and CMB constraints now opens a new window: we can search for limits on potential changes in N ν and/or the baryon-to-photon ratio η between the two epochs. The present data place strong constraints on the allowed changes in N ν between BBN and CMB decoupling; for example, we find -0.708 < N ν CMB - N ν BBN < 0.328 in the case where η and the primordial helium mass fraction Yp are unchanged between the two epochs; we also give limits on the allowed variations in η or in (η, N ν ) jointly. We discuss scenarios in which such changes could occur, and show that BBN+CMB results combine to place important constraints on some early dark energy models to explain the H 0 tension. Looking to the future, we forecast the tightened precision for N ν arising from both CMB Stage 4 measurements as well as improvements in astronomical 4 He measurements. Here, we find that CMB-S4 combined with present BBN and light element observation precision can give σ(N ν ) ≃ 0.03. Such future precision would reveal the expected effect of neutrino heating (N eff -3 = 0.044) of the CMB during BBN, and would be near the level to reveal any particle species ever in thermal equilibrium with the standard model. Improved Y p measurements can push this precision even further.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

The role of ion-scale micro-turbulence in pedestal width of the DIII-D wide-pedestal QH mode

The low-edge rotation, intrinsically ELM-free, and improved confinement wide-pedestal quiescent H-mode (QH-mode), discovered in DIII-D tokamak, has pedestal widths exceeding the EPED-kinetic-ballooning mode (KBM) model scaling typically by at least 25%. Ion-scale ($k_yp_s$ < 1) microturbulence and its role in setting the pedestal structure is investigated using the radially local δ$f$ gyrokinetic code CGYRO. The electromagnetic trapped electron mode (TEM) is unstable at the pedestal top, while plasma beta (β$_e$) is ∼60% below the KBM onset threshold and the electron temperature gradient mode is found to be unstable in the peak gradient region. Nonlinear simulation reveals that the ion-scale turbulence could produce electron energy flux consistent with the flux inferred from power balance at the pedestal top, with a reasonable variation of the local shearing rate; and the local neoclassical transport from NEO is dominant over the simulated turbulent transport in the ion energy flux channel. The simulated ion-scale turbulence produces much lower electron energy flux than inferred from experiment in the pedestal peak gradient region. A correction to the EPED-KBM pedestal width scaling is obtained based on the two-dimensional scan of pedestal top plasma beta (β$_e$) and normalized electron density and temperature scale lengths,${a}$/${L_n}_e$, ${a}$/${L_T}_n$using CGYRO linear simulations. Mode transitions among TEM, micro-tearing mode, ion-temperature gradient mode and KBM, are observed in the 2D scan at the pedestal top. A fixed normalized growth rate for these drift-type modes is taken to determine the pedestal width scaling, which shows good consistency with the QH experimental database on pedestal heights and widths. The onset of KBM instabilities and the local E × B shear suppression criterion set the lower and upper limit for the pedestal width of standard QH-mode, wide-pedestal QH-mode and type-I ELMy H mode. A potentially higher and wider pedestal is expected from the new scaling of pedestal width. This work presents an improved understanding of the ion-scale micro-turbulence of wide-pedestal QH-mode and sheds light on a promising scenario for future reactors, including ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Data for Conversion of High-Solids Hydrothermally Pretreated Bioenergy Sorghum to Lipids and Ethanol Using Yeast Cultures

Glucose and xylose are the major sugars present in cellulosic hydrolysates. The cellulosic sugars can be used for the production of platform chemicals. In this study, productions of lipid and ethanol by yeasts were compared for concentrated bioenergy sorghum syrup. Bioenergy sorghum was hydrothermally pretreated at 50% w/w solids in a continuous industrial reactor and sequentially mechanically refined using a burr mill to improve biomass accessibility for hydrolysis. Fed-batch enzymatic hydrolysis was conducted with 50% w/v solids loading and cellulase cocktail (50 FPU/g biomass) to achieve 230 g/L sugar concentration. Various strains of Rhodosporidium toruloides were evaluated for converting sugars into lipids, and strain Y-6987 had the highest lipid titer (9.2 g/L). The lipid titer was improved to 19.0 g/L by implementing a two-stage culture scheme, where the first stage was optimized for yeast growth and the second for lipid production. For ethanol production, the engineered Saccharomyces cerevisiae SR8ΔADH6 was used to coferment glucose and xylose. Ethanol fermentation was optimized for media nutrients (YP, YNB/urea, and urea), cellulosic sugar concentration, and sulfite conditioning to maximize the ethanol concentration from sorghum syrups. Fermentation of 70% v/v concentrated hydrolysate conditioned with sulfite produces 50.1 g/L ethanol from 141 g/L of sugars.

Conversion↗

DOE OSTI2021

Structures of HIV-1 Neutralizing Antibody 10E8 Delineate the Mechanistic Basis of Its Multi-Peak Behavior on Size-Exclusion Chromatography

Antibody 10E8 is capable of effectively neutralizing HIV through its recognition of the membrane-proximal external region (MPER), and a suitably optimized version of 10E8 might have utility in HIV therapy and prophylaxis. However, 10E8 displays a three-peak profile on size-exclusion chromatography (SEC), complicating its manufacture. Here we show cis-trans conformational isomerization of the Tyr-Pro-Pro (YPP) motif in the heavy chain 3rd complementarity-determining region (CDR H3) of antibody 10E8 to be the mechanistic basis of its multipeak behavior. We observed 10E8 to undergo slow conformational isomerization and delineate a mechanistic explanation for effective comodifiers that were able to resolve its SEC heterogeneity and to allow an evaluation of the critical quality attribute of aggregation. We determined crystal structures of single and double alanine mutants of a key di-proline motif and of a light chain variant, revealing alternative conformations of the CDR H3. We also replicated both multi-peak and delayed SEC behavior with MPER-antibodies 4E10 and VRC42, by introducing a Tyr-Pro (YP) motif into their CDR H3s. Our results show how a conformationally dynamic CDR H3 can provide the requisite structural plasticity needed for a highly hydrophobic paratope to recognize its membrane-proximal epitope.

60 APPLIED LIFE SCIENCES↗

NASA NTRS2011

Experimental Waterflow Determination of the Dynamic Hydraulic Transfer Function for the J-2X Oxidizer Turbopump: Results and Interpretation - Part Two

Experimental results describing the hydraulic dynamic pump transfer matrix (Yp) for a cavitating J-2X oxidizer turbopump inducer+impeller tested in subscale waterflow are presented. The transfer function is required for integrated vehicle pogo stability analysis as well as optimization of local inducer pumping stability. Dynamic transfer functions across widely varying pump hydrodynamic inlet conditions are extracted from measured data in conjunction with 1D-model based corrections. Derived Dynamic transfer functions are initially interpreted relative to traditional Pogo pump equations. Water-to-liquid oxygen scaling of measured cavitation characteristics are discussed. Comparison of key dynamic transfer matrix terms derived from waterflow testing are made with those implemented in preliminary Ares Upper Stage Pogo stability modeling. Alternate cavitating pump hydraulic dynamic equations are suggested which better reflect frequency dependencies of measured transfer matrices.

Zoladz, Tom↗

NASA NTRS2011

Study of Anti-Vortex Baffle Effect in Suppressing Swirling Flow in LOX Tank

Yang, H. Q.↗

NASA NTRS1942

Preliminary Results of Flight Tests of a Conventional Three-Blade Propeller at High Speeds

As part of the program of flight tests of airplane propellers to determine compressibility effects at high speeds, preliminary flights have been made with a conventional three-blade propeller (Hamilton Standard 3155-6) on a Bell YP-39 airplane. This preliminary report presents the high-speed data obtained thus far with a brief analysis of the results.

Vogeley, A. W.↗

DOE OSTI2021

Photoproduction of Lambda* Resonances using the CLAS Detector

This thesis presents the study of the reaction yp -> K^+Lambda* using the photo production data from the CLAS-g12 experiment performed in Hall B of Jefferson Laboratory. The decay of Lambda* resonances, Lambda(1520), Lambda(1670), and Lambda(1690), into two exclusive channels, Sigma+pi?and Sigma-pi+, is studied from the detected K+,pi+, and pi?particles. This work aims at understanding photoproduction mechanism to excited state baryons, and to facilitate phenomenological model predictions using precision experimental measurements. A good agreement is established for the Lambda(1520) differential cross sections with the previous CLAS measurements. The differential cross sections as a function of CM angle are extended to higher photon energies. Newly added are the differential cross sections as a function of invariant 4-momentum transfer, which is the natural variable to use for a theoretical model based on a Regge-exchange reaction mechanism. No new N* resonances decaying into the K+Lambda(1520) final state are found. The higher mass resonances, Lambda(1670)1/2- and Lambda(1690)3/2-, are studied for the first time using photoproduction. This work provides a model dependent preliminary cross sections for these excited states.

Shrestha, Utsav↗