Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “X-RAY EQUIPMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Breast Cancer Detection

NASA's Jet Propulsion Laboratory has come up with a technique to decrease exposure to harmful x-rays in mammographies or breast radiography. Usually, physicians make more than one exposure to arrive at an x-ray film of acceptable density. Now the same solar cells used to convert sunlight into electricity on space satellites can make a single exposure sufficient. When solar cell sensor is positioned directly beneath x-ray film, it can determine exactly when film has received sufficient radiation and has been exposed to optimum density. At that point associated electronic equipment sends signal to cut off x-ray source. Reduction of mammography to single exposures not only reduced x-ray hazard significantly, but doubled the number of patient examinations handled by one machine. The NASA laboratory used this control system at the Huntington Memorial Hospital with overwhelming success.

Source record↗

X-ray reflection and scatter measurements on selected optical samples

The results from an experimental program to determine the reflection efficiency and scatter parameters of selected optical samples are presented. The measurements were made using 8.34A X-rays at various angles of incidence. Selected samples were contaminated after being measured and then remeasured to determine the effects of contamination. The instrumentation involved in taking the data, including the X-ray reflectometer and data processing equipment, is discussed in detail. The condition of the optical surfaces, the total reflection measurements, the scatter measurements, and the analysis are discussed.

Fields, S. A.↗

Precision X-ray telescopes on HEAO-C.

Discussion of precision X-ray telescopes which are to be mounted on HEAO-C aircraft designed to study the structure, energy spectra and transient behavior of specific X-ray objects by the scanning and mapping of the sky. The design features and performance characteristics of the three high-resolution X-ray telescopes and their optical systems are considered. Mission equipment specifications and systems diagrams are appended. The HEAO-C mission is planned for launching by the Shuttle in the late 70s, with the capability of pointing to within one arc minute of X-ray sources for long periods of time.

Dailey, C. C.↗

Solar X-rays.

Solar X-ray data from rocket and satellite-borne equipment, discussing spectrum of quiet corona and active region

Underwood, J. H.↗

A rocket borne instrument for the study of soft X-ray emission from cosmic X-ray sources

Details about a rocket-borne instrument designed for studying the various characteristics of soft X-ray emission from cosmic X-ray sources in the energy range of 0.2 to 3 keV are presented. The X-ray detector consists of a bank of four multilayer, wall-less proportional counters, each with an area of 400 sq cm. The detectors are covered by windows of 1.4-micron polypropylene and are maintained at a constant pressure in flight using a gas control system. Two of the detectors are equipped with 0.4- by 10-deg collimators for mapping the spatial distribution of soft X-rays from extended X-ray sources. A pair of balanced filters consisting of oxygen and CF4 are used for detecting oxygen emission lines.

Agrawal, P. C.↗

X-ray observations of Cyg X-1 with ANS

The equipment, method and results of the measurements performed with soft and hard X-ray detectors of the Space Research Laboratory in Utrecht and the Center for Astrophysics in Cambridge, Mass., are described. Cyg X-1 underwent an upward transition in its intensity, that seems to be the inverse of the downward transition seen by Uhuru in April 1971. The bulk of the increase, as observed by the Astronomical Netherlands Satellite instruments, from May 1 to May 8, 1975, occurs at low energy: between 1 and 2 keV, the intensity increased by a factor of 10 over the November 1974 intensity, while above 8 keV there is no significant change. The data suggest that Cyg X-1 has reverted to its high state.

Heise, J.↗

Incipient failure detection.

In connection with the preparation for long-range space missions it is highly important to be able to identify potentially failure prone equipment in advance of the launch commitment. Physical phenomena investigated for this purpose include X-ray and gamma radiation, electrical noise, IR and UV radiation, and vibration energy. The technique selected must be capable of detecting the onset and evaluating the progression of conditions that represent basic causes which could lead to failure. As a result of the investigation, techniques based on acoustic energy release were selected as the most promising for incipient failure detection.

Griswold, J. W.↗

Skylab and its solar astronomy experiments.

The functional characteristics of the Skylab are considered together with general information concerning the spacecraft and its equipment. The Skylab solar instruments are examined, giving attention to two H-alpha telescopes, a white light coronograph, X-ray spectrographic telescopes, a UV scanning polychromator/spectroheliometer, a dual X-ray telescope, an XUV spectrograph/spectroheliograph, and instruments of X-ray/UV solar photography. The Skylab solar observing programs are discussed along with aspects of astronaut training and details regarding the control and display devices of the spacecraft.

Schneider, W. C.↗

Research study on stellar X-ray imaging experiment, volume 2

A review of the scientific objectives of an integrated X-ray orbiting telescope facility is presented. A set of observations to be conducted to achieve the objectives of the research are described. The techniques and equipment used in the experiment are defined. The configuration of the facility and the specifications of the test equipment are included.

Wilson, H. H.↗

Interpretation of VLF phase data

The specific applications of very low frequency phase tracking are described. The requirements for correct interpretation of very low frequency phase data are defined. The effects of the lower ionosphere and the ground along the path of signal propagation are analyzed. The following subjects are discussed: (1) interpretation equipment, (2) representation of very low frequency waves, (3) diurnal effects and mode interference phenomena, (4) antipodal interference, and (5) overall effects resulting from solar flares, galactic X-rays, and geomagnetic parameters.

Reder, F.↗

Geomagnetic background events observed by Uhuru

Problems due to sporadic background events observed by Uhuru (Small Astronomy Satellite - A) do not compromise the study of discrete X-ray sources. Nevertheless, direct particle effects and auroral type X-ray events in the atmosphere may occasionally occur. Therefore, even on the geomagnetic equator, an experiment must be prepared to recognize and eliminate such events when the ultimate level of sensitivity is desired. The test equipment contained in the satellite and the orbital mechanics of Small Astronomy Satellite - A are described. The sporadic events which were observed by the satellite are analyzed.

Schwartz, D. A.↗

Hard X-ray imaging facility for space shuttle: A scientific and conceptual engineering study

A shuttle-accommodated instrument for imaging hard X-rays in the study of nonthermal particles and high temperature particles in various solar and cosmic phenomena was defined and its feasibility demonstrated. The imaging system configuration is described as well as the electronics, aspect systems, mechanical and thermal properties and the ground support equipment.

Peterson, L. E.↗

A Saturn launched X-ray astronomy experiment. Volume 1: S-027

The S-027 X-Ray Astronomy Experiment originally proposed in early 1966, was developed to detect X-rays in the 2 keV to 10 keV range. Both a prototype unit and flight unit were constructed with the prototype unit also serving as the engineering model, the qualification test unit, and after refurbishment, as the back-up flight unit. Two Ground Support Equipment consoles were built to verify the experiment operation. A photograph of one experiment package with its Ground Support Equipment is shown. The S-027 experiment was scheduled for launch in 1968/69 and although both units were completed and tested to the extent that either would be ready for the scheduled launch, delays in the space program resulted in a launch date slip of several years. When the 1968/69 launch delay became official, provisions were made for storage of the two experiment packages at SCI Electronics in Huntsville, Alabama until a new launch date could be established.

Source record↗

Experiments to evaluate high-temperature rolling as a low-cost process for silicon solar cells

Mechanical rolling (a process used in industry for producing large quantities of metallic sheet and strip) has been suggested for the rapid low-cost manufacture of silicon sheet to be used for photovoltaic power generation equipment, such as solar arrays. The advantages of rolling include: high rates of production, wide sheets as products, good control of dimension, and (in the case of solar grade silicon) minimal development of impurities. Experiments have been performed using high-temperature, high-speed compression of polycrystalline silicon cylinders. Metallography and X-ray diffraction techniques have been used to examine the samples both before and after compression, and a model process has been designed to evaluate the technical practicality and economic feasibility of the method.

Noel, G. T.↗

Interim Report of the Astronomy Spacelab Payloads Study: Ultraviolet and Optical Astronomy - Volume 2

The Space Shuttle will comprise NASA's primary transportation system into near-earth orbit during the 1980s. The Shuttle will provide the astronomical community with a major new capability to send a wide variety of instrumentation into orbit, to utilize it there under manned or automatic control for periods from seven to thirty days, and to return it to the ground. To this end the European Space Research Organization (ESRO) is developing Spacelab, an array of interchangeable components -pressurized manned modules, unpressurized pallets and related support systems - to be mounted in the Shuttle payload bay. Spacelab will offer important opportunities to carry out astronomical research with instruments optimized for specific objectives. With a high flight frequency and with the ability to modify or interchange telescopes and instruments between flights, one will not need to make rigid long-term commitments to specific and compromised telescope/instrument/ detector combinations as is the case for automated satellites. Observational techniques demanding the physical return of data and equipment - in particular the use of photographic film, instruments requiring tight calibration controls, cryogens, high-risk detectors and degradeable optical coatings -will open research areas not readily addressed by automated satellites. Although Shuttle flight duration will be limited to periods from seven to thirty days, substantial data can be obtained with a single instrument on short missions, if targets are carefully selected and prioritized, and a large number of instruments can be accommodated on a single flight. Important astronomical data are regularly obtained on sounding rocket flights of five minutes duration. Spacelab will provide far longer observing periods for large and small telescopes, with resources greatly exceeding those of sounding rockets, while retaining much of the sounding rocket philosophy in terms of instrument flexibility, simplicity, reliability assurance and development costs. The Ultraviolet and Optical Astronomy Program on Spacelab is being planned to provide optical astronomers with relatively simple and regular access to the extended wavelength coverage, the superior image quality and the darkness of the night sky available above the earth's atmosphere. In a rapidly evolving science one cannot predict what problems will be timely in the 1980s. Extrapolating from the current epoch, however, one can envision a continuing interest in such areas as the structure, composition and phenomenology of planetary surfaces and atmospheres; the composition and physical nature of the interstellar medium; the composition, structure and life history of stars, especially those in advanced stages of evolution; the stellar population of other galaxies; such enigmatic phenomena as X-ray binary black holes, pulsars, active galactic nuclei and quasars; large scale interactions between galaxies and the nature of the intergalactic medium; precise calibration of the Hubble law for the expansion of the universe; the average density of the universe; and the existence of extraterrestrial life.

Source record↗

Mechanized X-ray inspection system for large tanks

Mechanized X ray equipment provides nondestructive inspection of structural weldments at various positions on very large tanks. It mechanizes the placement of the film, automates the identification process, adheres to safety requirements, and eliminates all the usual time-consuming manual operations in industrial radiography.

Occhipinti, G. C.↗

Anomalous minima in Cen X-3.

Report of an observation made with a rocket-borne argon-methane proportional counter, which was equipped with a 'Mylar' window and was sensitive to X rays in the range from 0.2 to 10 keV. During a scan of the galactic plane, the detector passed directly over the location of Cen X-3 at a roll rate of 1 deg per second. An extended minimum of X-ray flux was observed. It is concluded that the anomalous effect is intrinsic to the source.

Margon, B.↗