Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Determination of work functions near melting points of refractory metals by using a direct-current arc

Effective work functions of refractory metals at temperatures near their melting points were determined by using a direct-current arc. A metal wire connected as the cathode was melted by striking an arc discharge in an argon atmosphere. A melted sphere was formed with a definite emitting area which was calculated from the sphere diameter measured after terminating the arc. Effective work functions were calculated from the Richardson-Dushman equation by using this emission area. The procedure is experimentally advantageous because surface cleanliness of the specimen is not critical, high vacuum is not required, and the anode-cathode spacing is not critical.

Gordon, W. A.↗
NASA NTRS1976

Thermionic work function of /Cs/ZnO

The collector electrode of a thermionic converter requires a material having a low thermionic work function and chemical stability in a Cs atmosphere in the 800-K range. This letter reports that ZnO with an adsorbed Cs film meets these requirements. The work function is approximately 1.3 eV. Various methods of preparing the ZnO film are described as well as an experiment in which Cs was replaced by K.

Sommer, A. H.↗
NASA NTRS1985

Aluminum work function: Effect of oxidation, mechanical scraping and ion bombardment

Surface studies have been performed on aluminum polycrystalline surfaces which have been mechanically scraped. Such studies were initiated in order to understand surface effects occurring in tribological processes which involve rubbing surfaces and the effects of adsorption of oxygen. To characterize the surfaces, the following three different experimental approaches have been used: (1) X.P.S. (X-ray photoelectron spectroscopy), in order to check the cleanliness of the surfaces and follow the adsorption and oxidation kinetics; (2) Analysis of the work function changes by following the energy spectra of secondary electrons emitted under low energy electron bombardment; and (3) Analysis of photoemission intensities under U.V. excitation. The reference state being chosen to be the surface cleaned by ion bombardment and exposures to oxygen atmospheres have been shown to lower the work function of clean polycrystalline aluminum by 1.2 eV. The oxygen pressure is found to affect only the kinetics of these experiments. Mechanical scraping has been shown to induce a decrease ( 0.3 eV) in the work function, which could sharply modify the kinetics of adsorption on the surface.

Vinet, P.↗
NASA NTRSDate not supplied

Work Function Matching Passive Lunar Dust Mitigation Coating Preparation for Lunar Flight Opportunity

With the Artemis program, NASA isplanning longer stays on the surface, with more activities that have the potential to put the astronauts and equipment in contact with greater quantities of lunar dust. The success of these missions will depend on our understanding of material interactions with lunar dust and the development of ways to mitigate dust effects. This is particularly truein cases where exposure to dust will lead to failure of components, unacceptable loss of power or thermal control, unacceptable loss of visibility, or health issues.Optically transparent, sputter deposited,work function matching coatings are being developed at NASA Glenn Research Center to reduce adhesion of dust to windows, lenses and display panels by matching the minimum energy to remove an electron from the surface to that oflunar dust in order to reduce adhesion due to charge transfer. One of these work function matching coatings will be tested as part of Aegis Aerospace Inc.’s Regolith Adherence Characterization experiment going to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander in 2023. Preparation of the work function matching coating and initial characterization prior to delivery for flight integration will be discussed.

Lunar dust, passive mitigation, CLPS demonstration↗
NASA NTRS1972

Theoretical determination of cesiated work functions

A computer program based on the theoretical work of Gyftopoulos, Steiner, and Levine on bimetallic systems and using a modified version of Wilkins' SIMCON subroutine SURFAS was written for the Univac 1108. This program, WFGSL, accepts the operating conditions and the physical parameters pertinent to the substrate and adsorbate, and outputs the field-free work function, electron current (Richardson equation), ion current (Saha equation), and fractional substrate coverage by the adsorbate. A brief description of the theory is presented together with a program description and listing. An application of the program to a bimetallic system of cesium (adsorbate) and rhenium (substrate) is also described.

Szejn, R. M.↗