Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VALENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Excitations of one-valence-proton, one-valence-neutron nucleus {sup 210}Bi from cold-neutron capture

The low-spin structure of one-proton, one-neutron {sup 210}Bi nucleus was investigated in cold-neutron capture reaction on {sup 209}Bi. The γ-coincidence measurements were performed with use of EXILL array consisted of 16 HPGe detectors. The experimental results were compared to shell-model calculations involving valence particles excitations. The {sup 210}Bi nucleus offers the potential to test the effective proton-neutron interactions because most of the states should arise from the proton-neutron excitations. Additionally, it was discovered that a few states should come from the couplings of valence particles to the 3{sup −} octupole vibration in {sup 208}Pb which provides also the possibility of testing the calculations involving the core excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Glass–water interaction: Effect of high-valence cations on glass structure and chemical durability

Borosilicate glass is a durable solid, but it dissolves when in contact with aqueous fluids. The dissolution mechanism, which involves a variety of sequential reactions that occur at the solid-fluid interface, has important implications for the corrosion resistance of industrial and nuclear waste glasses. In this study, spectroscopic measurements, dissolution experiments, and Monte Carlo simulations were performed to investigate the effect of high–valence cations (HVC) on the mechanisms of glass dissolution under dilute and near-saturated conditions. Raman and NMR spectroscopy were used to determine the structural changes that occur in glass, specifically network formers (e.g., Al, Si, and B), with the addition of the HVC element hafnium in the Na2O–Al2O3–B2O3–HfO2–SiO2 system (e.g., Na/[Al+B] = 1.0 and HfO2/SiO2 from 0.0 to 0.42). Spectroscopic measurements revealed that increasing hafnium content decreases N4 (tetrahedral boron/total boron) and increases the amount of Si—O—Hf moieties in the glass. Results from flow–through experiments conducted under dilute and near–saturated conditions show a decrease of approximately 100× or more in the dissolution rate over the series from 0 to 20 mol% HfO2. Comparing the average steady-state rates obtained under dilute conditions to the rates obtained for near-saturated conditions reveals a divergence in the magnitude between the average steady state rates measured in these different conditions. The reason for this divergence was investigated more thoroughly using Monte Carlo simulations. Simulations indicate that the divergence in glass dissolution behavior under dilute and near-saturated conditions result from the stronger binding of Si sites that deposit on the surface from the influent when Hf is present in the glass. As a result, the residence time at the glass surface of these newly-formed Si sites is longer in the presence of Hf, which increases the density of anchor sites from which altered layers with higher Si densities can form. These results illustrate the importance of understanding solid–water/solid-fluid interactions by linking macroscopic reaction kinetics to nanometer scale interfacial processes.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

Kekulé valence bond order in an extended Hubbard model on the honeycomb lattice with possible applications to twisted bilayer graphene

Using large-scale quantum Monte Carlo simulations, we exactly solve a model of fermions hopping on the honeycomb lattice with cluster charge interactions, which has been proposed as an effective model with possible application to twisted bilayer graphene near half-filling. Here, we find an interaction driven semimetal to insulator transition to an insulating phase consisting of a valence bond solid with Kekulé pattern. Finite size scaling reveals that the phase transition of the semimetal to Kekulé valence bond solid phase is continuous and belongs to chiral XY universality class.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Atomic-Site-Specific Surface Valence-Band Structure from X-Ray Standing-Wave Excited Photoemission

X-ray standing-wave (XSW) excited photoelectron emission was used to measure the site-specific valence band (VB) for ½ monolayer (ML) Pt grown on a SrTiO 3 (001) surface. The XSW induced modulations in the core level (CL), and VB photoemission from the surface and substrate atoms were monitored for three ℎ⁡kl substrate Bragg reflections. The XSW CL analysis shows the Pt to have a face-centered-cubic-like cube-on-cube epitaxy with the substrate. The XSW VB information compares well to a density functional theory calculated projected density of states from the surface and substrate atoms. Altogether, this Letter represents a novel method for determining the contribution to the density of states by valence electrons from specific atomic surface sites.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

High Thermoelectric Performance in PbSe–NaSbSe 2 Alloys from Valence Band Convergence and Low Thermal Conductivity

PbSe is an attractive thermoelectric material due to its favorable electronic structure, high melting point, and lower cost compared to PbTe. Herein, the hitherto unexplored alloys of PbSe with NaSbSe 2 (NaPb m SbSe m+2 ) are described and the most promising p-type PbSe-based thermoelectrics are found among them. Surprisingly, it is observed that below 500 K, NaPb m SbSe m+2 exhibits unorthodox semiconducting-like electrical conductivity, despite possessing degenerate carrier densities of ≈10 20 cm -3 . Here, it is shown that the peculiar behavior derives from carrier scattering by the grain boundaries. It is further demonstrated that the high solubility of NaSbSe 2 in PbSe augments both the thermoelectric properties while maintaining a rock salt structure. Namely, density functional theory calculations and photoemission spectroscopy demonstrate that introduction of NaSbSe 2 lowers the energy separation between the L- and Σ-valence bands and enhances the power factors under 700 K. The crystallographic disorder of Na + , Pb 2+ , and Sb 3+ moreover provides exceptionally strong point defect phonon scattering yielding low lattice thermal conductivities of 1–0.55 W m -1 K -1 between 400 and 873 K without nanostructures. As a consequence, NaPb 10 SbSe 12 achieves maximum ZT ≈1.4 near 900 K when optimally doped. More importantly, NaPb 10 SbSe 12 maintains high ZT across a broad temperature range, giving an estimated record ZT avg of ≈0.64 between 400 and 873 K, a significant improvement over existing p-type PbSe thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Understanding the Interplay between the Nonvalence and Valence States of the Uracil Anion upon Monohydration

In this work we present an ab initio investigation into the effect of monohydration on the interaction of uracil with low energy electrons. Electron attachment and photodetachment experimental studies have previously shown dramatic changes in uracil upon solvation with even a single water molecule, due to an inversion of the character of the ground state of the anion. Here we explore the interplay between the nonvalence and valence states of the uracil anion, as a function of geometry and site of solvation. Our model provides unambiguous interpretation of previous photoelectron studies, reproducing the binding energies and photoelectron images for bare uracil and a single isomer of the U•(H 2 O) 1 cluster. Furthermore, the results of this study provide insight into how electrons may attach to hydrated nucleobases. These results lay the foundations for further investigations into the effect of microhydration on the electronic structure and electron capture dynamics of nucleobases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Incipient class II mixed valency in a plutonium solid-state compound

Electron transfer in mixed-valent transition-metal complexes, clusters and materials is ubiquitous in both natural and synthetic systems. The degree to which intervalence charge transfer (IVCT) occurs, dependent on the degree of delocalization, places these within class II or III of the Robin–Day system. In contrast to the d-block, compounds of f-block elements typically exhibit class I behaviour (no IVCT) because of localization of the valence electrons and poor spatial overlap between metal and ligand orbitals. Here, in this paper, we report experimental and computational evidence for delocalization of 5f electrons in the mixed-valent Pu III /Pu IV solid-state compound, Pu 3 (DPA) 5 (H 2 O) 2 (DPA = 2,6-pyridinedicarboxylate). The properties of this compound are benchmarked by the pure Pu III and Pu IV dipicolinate complexes, [Pu III (DPA)(H 2 O) 4 ]Br and Pu IV (DPA) 2 (H 2 O) 3 ·3H 2 O, as well as by a second mixed-valent compound, Pu III [Pu IV (DPA) 3 H 0.5 ] 2 , that falls into class I instead. Metal-to-ligand charge transfer is involved in both the formation of Pu 3 (DPA) 5 (H 2 O) 2 and in the IVCT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Bond Valences and Anharmonicity in Vacancy-Ordered Double Perovskite Halides

We report that anharmonic lattice dynamics are intimately linked with optical and electronic properties in perovskite halides semiconductors. Vacancy-ordered double perovskites are a subset of the perovskite halide family containing isolated octahedral units. The absence of polyhedral connectivity engenders the vacancy-ordered double perovskites with additional degrees of dynamic freedom, which presents an ideal structural framework to study dynamic-property relationships in perovskite halide semiconductors. In the present study, we examine the structure and bonding origins of anharmonicity in the vacancy-ordered double perovskites Cs 2 Sn 1-x Te x I 6 . While X-ray diffraction indicates that all members adopt the cubic vacancy-ordered double perovskite structure, the local coordination environment probed by X-ray pair distribution function (XPDF) analysis reveals asymmetry of the Cs–I/I–I pair correlation that smoothly decreases with increasing tellurium content. Temperature-dependent neutron total scattering suggests that this asymmetry in the PDF occurs due to anharmonic lattice dynamics arising from octahedral tilting and Cs + displacements, as supported by Reverse Monte Carlo simulations of the Cs 2 SnI 6 and Cs 2 TeI 6 end members. We further correlate the trends in asymmetry and anharmonicity with the bond valence sum of the Cs + ion, and find that the anharmonicity vanishes when the bonding preferences of the Cs + are satisfied by the size of the cuboctahedral void. Lastly, this study presents a simple and effective approach for understanding the origin of anharmonicity in vacancy-ordered double perovskite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Pressure-Resistant Intermediate Valence in the Kondo Insulator SmB 6

Resonant x-ray emission spectroscopy was used to determine the pressure dependence of the f-electron occupancy in the Kondo insulator SmB 6 . Applied pressure reduces the f occupancy, but surprisingly, the material maintains a significant divalent character up to a pressure of at least 35 GPa. Thus, the closure of the resistive activation energy gap and onset of magnetic order are not driven by stabilization of an integer valent state. In conclusion, over the entire pressure range, the material maintains a remarkably stable intermediate valence that can in principle support a nontrivial band structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗