Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Two-electron transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Computational Discovery of Active and Selective Metal‐Nitrogen‐Graphene Catalysts for Electrooxidation of Water to H 2 O 2

A direct electrosynthesis of H 2 O 2 from either O 2 or H 2 O is an attractive strategy to replace the energy-intensive industrial anthraquinone process. Two-electron water oxidation reaction (2e-WOR) offers several advantages over the oxygen reduction reaction such as better mass transfer due to the absence of gas-phase reactants. However, 2e-WOR is a more challenging and less studied process with only a handful of metal oxides exhibiting reasonable activity/selectivity properties. Herein, we employ density-functional-theory calculations to screen a variety of metal-nitrogen-graphene structures for 2e-WOR. As a consequence of scaling between the adsorption energies of reaction intermediates, we determine a linear relation between selectivities for the first and second reaction steps of 2e-WOR, viz. that if selectivity toward adsorbed OH is improved, then selectivity toward H 2 O 2 at the subsequent step is decreased. We also find that selectivity and activity are linearly scaled in such a way that a higher activity (i.e., a lower overpotential) leads to a lower selectivity for the H 2 O 2 formation step. Based on the obtained results several chemistries, e.g., containing NiN x -C moieties, are predicted to rival the best-performing metal oxides such as ZnO and CaSnO 3 in terms of combination of their activity/selectivity characteristics for 2e-WOR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Rhenium Bis -tetramethylphenanthroline Catalyst for CO 2 Reduction to Formate

Catalytic CO 2 reduction reactions featuring high selectivity toward formate are relatively rare. In some homogeneous molecular CO 2 -reducing electrocatalysis, using triethylamine (TEA) and isopropanol (IPA) as additives improves catalytic performance in producing formate. In this paper, we investigate whether the rhenium(I) bis-diimine dicarbonyl complexes, cis-[Re(N^N) 2 (CO) 2 ] + , where N^N is 2,2’-bipyridine ([1] + ) or 3,4,7,8-tetramethyl-1,10-phenanthroline ([2] + ), are capable of electrocatalytically reducing CO 2 to formate in acetonitrile containing TEA and IPA. Catalyst [1] + was ineffective at CO 2 reduction, yielding formate quantities comparable to those produced in experiments without the catalyst. Catalyst [2] + , however, is a promising electrocatalyst for the CO 2 reduction reaction in the presence of TEA and IPA, with formate being produced in millimolar concentrations (10.5 mM), as detected by 1 H NMR spectroscopy after 6 h electrolysis (formate Faradaic efficiency = 11%, with the major balance going to H 2 ). Upon more detailed examination, [2] + exhibited a turnover frequency (TOF) of 12 s –1 for formate, comparable to other leading molecular catalysts that competently execute this reduction. Combinations of spectroscopy, electrochemistry, and theory were used to better understand the mechanism of CO 2 reduction by [2] + . Fourier transform infrared spectroelectrochemical (FTIR-SEC) data provided no evidence for CO ligand dissociation or substitution upon one- and two-electron reduction of [2] + , suggesting that a mechanism distinct from one that is metal-hydride-based is operative in catalysis. Computational studies guide mechanistic investigations toward the proposed formation of a hydrophenanthroline-based intermediate responsible for hydride transfer to CO 2 and electrocatalytic formate production from [2] + .

Beverages↗
DOE OSTI2023

The contribution of Compton ionization to ultrafast x-ray scattering

We investigate the role of Compton ionization in ultrafast non-resonant x-ray scattering using a molecular model system, which includes the ionization continuum via an orthonormalized plane wave ansatz. Elastic and inelastic components of the scattering signal, as well as coherent-mixed scattering that arises from electron dynamics, are calculated. By virtue of a near-quantitative distinction between scattering related to electronic transitions into bound and continuum states, we demonstrate how Compton ionization contributes to the coherent-mixed component. Analogous to inelastic scattering, the contribution to the coherent-mixed signal is significant and particularly manifests at intermediate and high-momentum transfers. Strikingly, for molecules with inversion symmetry, the exclusion of bound or continuum transitions may lead to the prediction of spurious coherent-mixed signals. We conclude that qualitative and quantitative accuracies of predicted scattering signals on detectors without energy resolution require that elements of the two-electron density operator are used. This approach inherently accounts for all accessible electronic transitions, including ionization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Nanoarchitectonic Semiconductor–Bio Hybrid Systems with Enhanced Charge Transfer for Hydrogen Peroxide Production

Nanoarchitectonics offers a systematic approach to creating an artificial framework by integrating different multiscale components such as semiconductor lattices and biological substances. However, most nanoarchitectonic abiotic-biotic hybrid systems have intrinsic limitations in imparting nonequilibrium biological features into semiconductor lattices at the nanoscale. Here, in this study, we report a new nanoarchitectonic system integrating bismuth oxychloride (BiOCl) nanosheets with purple membrane (PM) patches. PM is an archaeal subcellular fraction capable of unidirectionally transferring photogenerated charge carriers to its surroundings at the nanoscale independent of archaeal metabolism and retaining this dynamic functionality after isolation from living archaea. Microscopy, spectroscopy, electrochemical, and synchrotron X-ray scattering analyses verify that the nanoarchitectonic hybridization between BiOCl and PM generates a vertical heterostructure, thereby enhancing photogenerated charge-carrier dynamics and enabling the associated photocatalytic capacity. The resulting PM-BiOCl hybrid nanosheets efficiently convert dioxygen into hydrogen peroxide through a two-electron and two-proton transfer process under ambient conditions while simultaneously converting ethylene glycol into value-added chemicals. This study presents a nanoarchitectonic approach that leverages the photogenerated charge-carrier dynamics of the archaeal subcellular fractions to modulate the optoelectronic and catalytic capacity limitations of semiconductors.

catalysis↗
DOE OSTI2021

Opening band gaps of low-dimensional materials at the meta-GGA level of density functional approximations

The quasiparticle band structure can be properly described by Hedin's GW approximation (GW), at a high computational cost. For band gaps, semilocal density functionals up to the generalized gradient approximation (GGA) level cannot compete with the accuracy of hybrid-based approximations or GW. Meta-GGA density functionals with a strong dependence on the kinetic energy density ingredient can potentially give wider band gaps compared with GGAs. The recent TASK meta-GGA density functional from Aschebrock and Kümmel [ Phys. Rev. Research 1 , 033082 (2019) ], is constructed with an enhanced nonlocality in the generalized Kohn-Sham scheme and therefore harbors great opportunities for band gap prediction. Although this approximation was found to yield excellent band gaps of bulk solids, this accuracy cannot be straightforwardly transferred to low-dimensional materials. Additionally, the reduced screening of these materials results in larger band gaps compared with their bulk counterparts, as an additional barrier to overcome. In this paper we demonstrate how the alteration of this functional affects the band gaps of monolayers and nanoribbons and present accurate band gaps competing with the revised Heyd-Scuseria-Ernzerhof (HSE06) approximation. In order to achieve this goal, we have modified the TASK functional (a) by changing the tight upper bound for one- or two-electron systems ( h X 0 ) from 1.174 to 1.29 and (b) by changing the limit of the interpolation function f X ( α → ∞ ) of the TASK functional that interpolates the exchange enhancement factor F X ( s , α ) from α = 0 to 1. The resulting modified TASK (mTASK) was tested for various materials from three dimensions to two dimensions to one dimension (nanoribbons) and was compared with the results of the higher-level hybrid functional HSE06 or with the G 0 W 0 approximation within many-body perturbation theory. We find that mTASK systematically improves the band gaps and band structures of two-dimensional (2D) and 1D systems, without significantly affecting the accuracy of the original TASK for the bulk 3D materials, when compared with the Perdew-Burke-Ernzerhof (PBE) GGA and the strongly constrained and appropriately normed (SCAN) meta-GGA. We further demonstrate the applicability of mTASK by assessing the band structures of transition metal dichalcogenide nanoribbons with respect to various bending curvatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Carborane-Derived Proton-Coupled Electron Transfer Reagent

Reagents capable of concerted proton–electron transfer (CPET) reactions can access reaction pathways with lower reaction barriers compared to stepwise pathways involving electron transfer (ET) and proton transfer (PT). To realize reductive multielectron/proton transformations involving CPET, one approach that has shown recent promise involves coupling a cobaltocene ET site with a protonated arylamine Brønsted acid PT site. This strategy colocalizes the electron/proton in a matter compatible with a CPET step and net reductive electrocatalysis. To probe the generality of such an approach a class of C,C'-diaryl-ocarboranes is herein explored as a conceptual substitute for the cobaltocene subunit, with an arylamine linkage still serving as a colocalized Brønsted base suitable for protonation. The featured ocarborane (PhCbPh N ) can be reduced and protonated to generate an N–H bond with a weak effective bond dissociation free energy (BDFE eff ) of 31 kcal/mol, estimated with measured thermodynamic data. This N–H bond is among the lowest measured element–H bonds for analyzed nonmetal compounds. Distinct solid-state crystal structures of the one- and two-electron reduced forms of diaryl-o-carboranes are disclosed to gain insight into their well-behaved redox characteristics. The singly reduced, protonated form of the diaryl-o-carborane can mediate multi-ET/PT reductions of azoarenes, diphenylfumarate, and nitrotoluene. In contrast to the aforementioned cobaltocene system, available mechanistic data disclosed herein support these reactions occurring by a rate-limiting ET step and not a CPET step. A relevant hydrogen evolution reaction (HER) reaction was also studied, with data pointing to a PT/ ET/PT mechanism, where the reduced carborane core is itself highly stable to protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2010

Electrochemical Hydrogen Peroxide Generator

Two-electron reduction of oxygen to produce hydrogen peroxide is a much researched topic. Most of the work has been done in the production of hydrogen peroxide in basic media, in order to address the needs of the pulp and paper industry. However, peroxides under alkaline conditions show poor stabilities and are not useful in disinfection applications. There is a need to design electrocatalysts that are stable and provide good current and energy efficiencies to produce hydrogen peroxide under acidic conditions. The innovation focuses on the in situ generation of hydrogen peroxide using an electrochemical cell having a gas diffusion electrode as the cathode (electrode connected to the negative pole of the power supply) and a platinized titanium anode. The cathode and anode compartments are separated by a readily available cation-exchange membrane (Nafion 117). The anode compartment is fed with deionized water. Generation of oxygen is the anode reaction. Protons from the anode compartment are transferred across the cation-exchange membrane to the cathode compartment by electrostatic attraction towards the negatively charged electrode. The cathode compartment is fed with oxygen. Here, hydrogen peroxide is generated by the reduction of oxygen. Water may also be generated in the cathode. A small amount of water is also transported across the membrane along with hydrated protons transported across the membrane. Generally, each proton is hydrated with 3-5 molecules. The process is unique because hydrogen peroxide is formed as a high-purity aqueous solution. Since there are no hazardous chemicals or liquids used in the process, the disinfection product can be applied directly to water, before entering a water filtration unit to disinfect the incoming water and to prevent the build up of heterotrophic bacteria, for example, in carbon based filters. The competitive advantages of this process are: 1. No consumable chemicals are needed in the process. The only raw materials needed are water and oxygen or air. 2. The product is pure and can therefore be used in disinfection applications directly or after proper dilution with water. 3. Oxygen generated in the anode compartment is used in the electrochemical reduction process; in addition, external oxygen is used to establish a high flow rate in the cathode compartment to remove the desired product efficiently. Exiting oxygen can be recycled after separation of liquid hydrogen peroxide product, if so desired. 4. The process can be designed for peroxide generation under microgravity conditions. 5. High concentrations of the order of 6-7 wt% can be generated by this method. This method at the time of this reporting is superior to what other researchers have reported. 6. The cell design allows for stacking of cells to increase the hydrogen peroxide production. 7. The catalyst mix containing a diquaternary ammonium compound enabled not only higher concentration of hydrogen peroxide but also higher current efficiency, improved energy efficiency, and catalyst stability. 8. The activity of the catalyst is maintained even after repeated periods of system shutdown. 9. The catalyst system can be extended for fuel-cell cathodes with suitable modifications.

Tennakoon, Charles L. K.↗
DOE OSTI2021

Photodriven Elimination of Chlorine From Germanium and Platinum in a Dinuclear Pt II →Ge IV Complex

Searching for a connection between the two-electron redox behavior of Group-14 elements and their possible use as platforms for the photoreductive elimination of chlorine, we have studied the photochemistry of [(o-(Ph 2 P)C 6 H 4 ) 2 Ge IV Cl 2 ]Pt II Cl 2 and [(o-(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt III Cl 3 , two newly isolated isomeric complexes. These studies show that, in the presence of a chlorine trap, both isomers convert cleanly into the platinum germyl complex [(o-(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt I Cl with quantum yields of 1.7 % and 3.2 % for the Ge IV –Pt II and Ge III –Pt III isomers, respectively. Conversion of the Ge IV –Pt II isomer into the platinum germyl complex is a rare example of a light-induced transition-metal/main-group-element bond-forming process. Additionally, transient-absorption-spectroscopy studies carried out on the Ge III –Pt III isomer point to a ligand arene–Cl. charge-transfer complex as an intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Insight Into the High-Potential Branch of the Alternate Nad+-Dependent NADPH:Ferredoxin Oxidoreductase II (NfnII) from Pyrococcus Furiosus. Evidence for the Gating Step in Electron Bifurcation

We have investigated the rapid-reaction kinetics of the NAD+-dependent NADPH:ferredoxin oxidoreductase II (NfnII) from Pyrococcus furiosus, permitting a comparison with recent work done with the paralog NfnI from the same organism. The half-potentials of the electron-bifurcating L-FAD are highly crossed in both NfnI, meaning the potential for the quinone/semiquinone couple is significantly lower than that for the semiquinone/hydroquinone couple so that the semiquinone oxidation state is thermodynamically unstable. The same appears to be the case with NfnII on the basis of its similar behavior in transient absorption spectroscopy experiments and the absence of any evidence for FAD*- accumulation in the course of reductive titrations (which would be manifested as a transient increase in absorbance at ~380 nm)1. Reductive titrations with both the one-electron donor sodium dithionite and the obligate two-electron donor NADPH demonstrate that, in contrast to NfnI, little FADH* accumulates in the high-potential pathway of NfnII in the course of reduction, as reflected in the absence of a transient increase in absorbance in the 500-600 nm region. This indicates that the half-potentials of the S-FAD are crossed in NfnII by a minimum of 120 mV. Rapid-reaction experiments mixing oxidized NfnII with NADPH also show no evidence of S-FADH* accumulation. Furthermore, the enzyme is only partially reduced at the end of the reaction with NADPH, indicating that there is little electron transfer into the high-potential pathway of NfnII. When the reaction is carried out in the presence of the one-electron carrier ferredoxin, only approximately one equivalent of ferredoxin becomes reduced, in contrast to the maximum of three equivalents seen with NfnI. This is consistent with only a single electron bifurcation event taking place under these conditions with NfnII, with only a single high-potential electron passing into the [2Fe-2S] cluster of the high-potential pathway of NfnII but not progressing further to the S-FAD. This accounts for the observation that NfnII has greatly reduced bifurcating activity compared to NfnI. The lack of electron transfer into the S-FAD of NfnII due to its crossed half-potentials prevents successive bifurcation activity and indicates that electron transfer within the high-potential branch gates bifurcation activity in NfnI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deciphering Distinct Overpotential-Dependent Pathways for Electrochemical CO 2 Reduction Catalyzed by an Iron–Terpyridine Complex

[Fe(tpyPY2Me)] 2+ ([Fe] 2+ ) is a homogeneous electrocatalyst for converting CO 2 into CO featuring low overpotentials of <100 mV, near-unity selectivity, and high activity with turnover frequencies faster than 100 000 s -1 . To identify the origins of its exceptional performance and inform future catalyst design, we report a combined computational and experimental study that establishes two distinct mechanistic pathways for electrochemical CO 2 reduction catalyzed by [Fe] 2+ as a function of applied overpotential. Electrochemical data shows the formation of two catalytic regimes at low (η TOF/2 of 160 mV) and high (η TOF/2 of 590 mV) overpotential plateaus. We propose that at low overpotentials [Fe] 2+ undergoes a two-electron reduction, two-proton-transfer mechanism (electrochemical-electrochemical-chemical-chemical, EECC), where turnover occurs through the dicationic iron complex, [Fe] 2+ . Computational analysis supports the importance of the singlet ground-state electronic structure for CO 2 binding and that the rate-limiting step is the second protonation in this low-overpotential regime. When more negative potentials are applied, an additional electron-transfer event occurs through either a stepwise or proton-coupled electron-transfer (PCET) pathway, enabling catalytic turnover from the monocationic iron complex ([Fe] + ) via an electrochemical-chemical-electrochemical-chemical (ECEC) mechanism. Comparison of experimental kinetic data obtained from variable controlled potential electrolysis (CPE) experiments with direct product detection with calculated rates obtained from the energetic span model supports the PCET pathway as the most likely mechanism. Moreover, we build upon this mechanistic understanding to propose the design of an improved ligand framework that is predicted to stabilize the key transition states identified in our study and explore their electronic structures using an energy decomposition analysis. Finally, taken together, this work highlights the value of synergistic computational/experimental approaches to decipher mechanisms of new electrocatalysts and direct the rational design of improved platforms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

How a Formate Dehydrogenase Responds to Oxygen: Unexpected O 2 Insensitivity of an Enzyme Harboring Tungstopterin, Selenocysteine, and [4Fe–4S] Clusters

The reversible two-electron interconversion of formate and CO 2 is catalyzed by both nonmetallo- and metallo-formate dehydrogenases (FDHs). The latter group comprises molybdenum- or tungsten-containing enzymes with the metal coordinated by two equivalents of a pyranopterin cofactor, a cysteinyl or selenocysteinyl (Sec) ligand supplied by the polypeptide, and a catalytically essential terminal sulfido ligand. In addition, these biocatalysts incorporate one or more [4Fe–4S] clusters for facilitating long-distance electron transfer. However, an interesting dichotomy arises when attempting to understand how the metallo-FDHs react with O 2 . Whereas existing scholarship portrays these enzymes as being unable to perform in air due to extreme O 2 lability of their metal centers, studies dating as far back as the 1930s emphasize that some of these systems exhibit formate oxidase (FOX) activity, coupling formate oxidation to O 2 reduction. Therefore, to reconcile these conflicting views, we explored context-dependent functional linkages between metallo-FDHs and their cognate electron acceptors within the same organism vis-à-vis catalysis under atmospheric O 2 . Here, we report the discovery and characterization of an O 2 -insensitive FDH2 from the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough (DvH) that ligates tungsten, Sec, and four [4Fe–4S] clusters. By advancing a robust expression platform for its recombinant production, we eliminate both the requirement of nitrate or azide during purification and reductive activation with thiols and/or formate prior to catalysis. Because the distinctive spectral signatures of formate-reduced DvH-FDH2 remain invariant under anaerobic and aerobic conditions, we benchmarked the enzyme activity in air, identifying CO 2 as the catalytic product. Full reaction progress curve analysis discloses a high catalytic efficiency when probed with a high-potential artificial electron acceptor. Furthermore, we show that DvH-FDH2 enables near-stoichiometric hydrogen peroxide production without superoxide release to achieve O 2 insensitivity. Notably, simultaneous electron transfer to cytochrome c and O 2 reveals that metal-based electron bifurcation is operational in this system. Taken together, our work proves the co-occurrence of redox bifurcated FDH and FOX activities within a metalloenzyme scaffold. These findings set the stage for uncovering previously unknown O 2 -insensitive flavin-based electron bifurcation mechanisms, as well as for developing authentic formate/air biofuel cells, engineering O 2 -stable FDHs and biohybrid metallocatalysts, and discerning formate bioenergetics of gut microbiota.

13C NMR↗
DOE OSTI2024

Circumventing Kinetic Barriers to Metal Hydride Formation with Metal–Ligand Cooperativity

We report the two-electron, one-proton mechanism of cobalt hydride formation for the conversion of [Co III Cp(P Ph 2 N Bn 2 )(CH 3 CN)] 2+ to [HCo III Cp(P Ph 2 NBn 2 )] + . This complex catalytically converts CO 2 to formate under CO 2 reduction conditions, with hydride formation as a key elementary step. Through a combination of electrochemical measurements, digital simulations, theoretical calculations, and additional mechanistic and thermochemical studies, we outline the explicit role of the P Ph 2 N Bn 2 ligand in the proton-coupled electron transfer (PCET) reactivity that leads to hydride formation. We reveal three unique PCET mechanisms, and we show that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site en route to the thermodynamically favored cobalt hydride. Cyclic voltammograms recorded with proton sources that span a wide range of pK a values show four distinct regimes where the mechanism changes as a function of acid strength, acid concentration, and timescale between electrochemical steps. Peak shift analysis was used to determine proton transfer rate constants where applicable. Furthermore, this work highlights the astute choices that must be made when designing catalytic systems, including the basicity and kinetic accessibility of protonation sites, acid strength, acid concentration, and timescale between electron transfer steps, to maximize catalyst stability and efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Efficient Self-Sensitized Photochemical CO 2 Reduction Using [Re(bpy 2+ )(CO) 3 (I)] 2+ and [Re(bpy 2+ )(CO) 3 (CH 3 CN)] 3+ Photocatalysts with Pendent Ammonium Cations

Rhenium(I) tricarbonyl complexes fac-[Re(bpy)(CO) 3 (L)]n + are the classical examples of self-sensitized photocatalysts capable of the dual roles of light absorption and catalysis. Here, in this work, a series of dicationic halido or tricationic solvento complexes fac-[Re(bpy 2+ )(CO) 3 X] n+ (PF 6 ) n (where X = Cl - or I - (n = 2), or CH 3 CN (n = 3) and bpy 2+ is bipyridine modified by two -CH 2 -(NMe3) + tetra-alkylammonium cations) have been investigated as self-sensitized and sensitized CO 2 reduction photocatalysts. Four structural isomers differing in the cation position have been tested in N,Nʹ-dimethylacetamide solvent (DMA) using 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzimidazole (BIH) as the electron donor, and the position of the cationic pendants has a significant impact on the catalyst turnover number and quantum efficiency (ϕ). Up to 455 self-sensitized turnovers of CO and a high photon efficiency (ϕ CO ) of 22% have been achieved. Time-resolved infrared spectroscopy and theoretical calculations were used to characterize the catalytic cycle including the ligand exchange between one-electron reduced (OER) halido and solvento species as well as the binding of CO 2 to the putative two-electron reduced (TER) species. The CO 2 -reactive TER catalyst was formed by disproportionation or intramolecular electron transfer between two forms of the OER catalyst as indicated by the formation of the fully oxidized catalyst concurrent with CO 2 binding. When [Ru(bpy) 3 ] 2+ was used as a sensitizer, catalyst durability improved, and the selectivity toward formate increased as high as 3.3:1 over CO (total TON = 1370) due to acidification of the reaction, which promotes formation of the hydride intermediate, as BIH was consumed and deprotonated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Cocatalytic System for Electrooxidation of Primary, Secondary, and Benzyl Alcohols Based on a Triruthenium Oxo-Centered Cluster and NHPI

Increasing interest in alternative methods for fuel generation and chemical synthesis has resulted in an increased focus on the development of electrocatalysts for energy relevant small molecule transformations, such as the oxidation of methanol. Partial methanol oxidation is a crucial step in the generation of the commodity chemical formaldehyde, and its complete oxidation to carbon dioxide can also serve as the anodic reaction in direct methanol fuel cells. We report a coelectrocatalytic system comprised of an oxo-centered triruthenium cluster (Ru 3 O) as the catalyst, with the electro-generated N-phthalimido-N-oxyl (PINO) radical species acting as a redox mediator. Only a mild Brønsted base, 2,6-lutidine, is required to achieve an electrocatalytic response. The cocatalytic system demonstrates remarkable cooperativity, shifting the oxidation potential of MeOH (Ep) less positive by ca. 0.5 V compared to the intrinsic response of the Ru 3 O complex. Controlled potential electrolysis on a model substrate, 4-trifluoromethylbenzyl alcohol, demonstrates selective production of the two-electron, two-proton aldehyde product with a Faradaic efficiency of 79 ± 11% at a rate of 3.14 s –1 . The rate of cocatalysis is 50-fold greater than the intrinsic activity of Ru3O and 26-fold greater than that of PINO alone under otherwise identical conditions. Mechanistic studies reveal the oxidation of a Ru 3 O–alkoxide species as the potential-determining step, while two possible rate-determining steps are identified depending on the substrate. A preference for sterically uninhibited electron-rich benzyl alcohol substrates suggests that a H atom transfer from the Ru 3 O–alkoxide adduct to PINO is rate-determining, while the lack of an observed kinetic isotope effect using deuterated MeOH suggests the oxidation of the Ru 3 O–alkoxide species is both rate- and potential-determining for cocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Water-coupled monovalent and divalent ion transport in polyviologen networks

Redox-active polymers (RAPs) are of interest as environmentally friendly and earth-abundant energy storage materials. Polyviologens are promising RAPs, but they tend to dissolve during operation. Further, the two-electron redox reaction for polyviologens in various electrolytes is not always reversible, highlighting the need for a deeper understanding of the redox mechanism. Here, the energy storage mechanism for a cross-linked viologen (PTPM) is demonstrated using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D), comparing NaCl and Na2SO4 aqueous electrolytes. E-QCMD reveals that the ion-electron transport mechanism is strongly dependent on the valency of the anion. More sudden and dramatic changes in the electrode's mass were observed for the divalent sulfate ion as compared to the smooth mass transitions associated with the monovalent chloride ion. Meanwhile, there was marked hysteresis in the mass transfer profile for NaCl, but little hysteresis for Na2SO4. Our results demonstrate that electrolyte design, and specifically ion valency, will have a large impact on the nature of mass transport in polymer-based electrodes. This work enables electrolyte selection for the next generation polymer batteries with improved performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electron–electrophile coupled dinitrogen reduction in a cerium– meta -tetraphenolate system: a computational study

The use of lanthanide complexes for catalytic dinitrogen reduction is a new development in homogeneous catalysis. Density functional theory calculations on our recently reported cerium phenolate catalyst [K 2 Ce 2 (sol) 4 (mTP) 2 ] (mTP = {(OC 6 H 2 - 2- t Bu-4-Me) 2 CH} 2 - 1,3-C 6 H 4 ; sol = OMe 2 here; THF in the experiment) have been undertaken to elucidate the reduction, activation and silylation steps at the bound dinitrogen molecule, in the presence of the reductant, potassium metal (K 0 ) and the electrophile Me 3 SiCl (TMSCl). Out of the total of six electron reductions required to cleave the N 2 , the first two-electron reduction step was found to be highly disfavoured unless potassium cations (K + ) are included, upon which the step is rendered strongly exergonic; N–Si bond formation at the two-electron stage is predicted to be unfavourable. The three-electron-reduced N 2 -adduct is found to be at the reductive activation limit in the absence of added electrophiles, which can form N-element bonds and lower the overall charge. Added electron density beyond three-electron reduction no longer localises on N 2 , preventing formal N 2 4− formation. A pathway in which both K 0 and Me 3 SiCl work in concert was modelled, and six sequential reduction–silylation steps were calculated, showing how the N–N bond is cleaved after the third reduction, eventually releasing two equivalents of N(SiMe 3 ) 3 , and regenerating the starting complex with the highest barrier of any step being 22 kcal mol −1 . We establish alkali metal coordination and coupled electron–electrophile transfer as key factors in the design of rare-earth-mediated dinitrogen functionalisation.

Ahmad, Shahbaz [Univ. of Manchester (United Kingdo↗
DOE OSTI2022

An uncharacteristically low-potential flavin governs the energy landscape of electron bifurcation

Significance Nature has long been an inspiration for materials design, as it exemplifies exquisite control of both matter and energy. Electron bifurcation, a mechanism employed in biological systems to drive thermodynamically unfavorable and energetically challenging chemical reactions, is one such example. A key feature of bifurcating enzymes is the ability of a single redox cofactor to distribute a pair of electrons across two spatially separated electron transfer pathways. Here, we report on the empirical determination of both the one-electron potential and two-electron potential of the bifurcating flavin cofactor in the NADH-dependent ferredoxin-NADP + oxidoreductase I (NfnSL) enzyme. Insights arising from the defined energy landscape of this bifurcation site may underlie the design of synthetic catalysts capable of generating high-energy intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Anodic Hydrogen Generation from Benzaldehyde on Au, Ag, and Cu: Rotating Ring-Disk Electrode Studies

Aldehydes are selectively oxidized to carboxylates on group 11 metals at low potentials (<0.4 V vs. RHE) in alkaline media. This process can occur by a pathway that generates H 2 gas from the aldehyde, known as electro-oxidative dehydrogenation (EOD) or anodic hydrogen production. The EOD process occurs with transfer of only one electron per aldehyde, whereas typical oxidation with discharge of hydrogen to form water is a two-electron process. Here, we study the catalytic activity and selectivity toward H 2 of Au, Ag, and Cu electrodes using benzaldehyde with rotating disk and ring-disk electrode (RDE/RRDE) techniques. The average number of electrons per benzaldehyde molecule obtained via H 2 detection by RRDE agrees with that obtained via Koutecký-Levich analysis conducted at various rotation rates. We find that Au and Ag have much higher H 2 and benzoate formation rates than Cu, but that Cu can perform the reaction at about 0.2 V lower overpotentials. On all three materials, benzaldehyde oxidation has high selectivity to anodic H 2 (one-electron pathway) below ∼0.5 V vs. RHE, but, with increasing potential, the selectivity shifts to H-oxidation forming water (two-electron pathway).

Ramos, Nathanael C. (ORCID:0000000247210350)↗